/* * Copyright 2014, Michael Ellerman, IBM Corp. * Licensed under GPLv2. */ #include <stdio.h> #include <stdlib.h> #include <stdbool.h> #include "ebb.h" /* * Test of counting cycles while using MMCR0_FC (freeze counters) to only count * parts of the code. This is complicated by the fact that FC is set by the * hardware when the event overflows. We may take the EBB after we have set FC, * so we have to be careful about whether we clear FC at the end of the EBB * handler or not. */ static bool counters_frozen = false; static int ebbs_while_frozen = 0; static void ebb_callee(void) { uint64_t mask, val; mask = MMCR0_PMAO | MMCR0_FC; val = mfspr(SPRN_BESCR); if (!(val & BESCR_PMEO)) { ebb_state.stats.spurious++; goto out; } ebb_state.stats.ebb_count++; trace_log_counter(ebb_state.trace, ebb_state.stats.ebb_count); val = mfspr(SPRN_MMCR0); trace_log_reg(ebb_state.trace, SPRN_MMCR0, val); if (counters_frozen) { trace_log_string(ebb_state.trace, "frozen"); ebbs_while_frozen++; mask &= ~MMCR0_FC; } count_pmc(1, sample_period); out: reset_ebb_with_clear_mask(mask); } int cycles_with_freeze(void) { struct event event; uint64_t val; bool fc_cleared; SKIP_IF(!ebb_is_supported()); event_init_named(&event, 0x1001e, "cycles"); event_leader_ebb_init(&event); event.attr.exclude_kernel = 1; event.attr.exclude_hv = 1; event.attr.exclude_idle = 1; FAIL_IF(event_open(&event)); setup_ebb_handler(ebb_callee); ebb_global_enable(); FAIL_IF(ebb_event_enable(&event)); mtspr(SPRN_PMC1, pmc_sample_period(sample_period)); fc_cleared = false; /* Make sure we loop until we take at least one EBB */ while ((ebb_state.stats.ebb_count < 20 && !fc_cleared) || ebb_state.stats.ebb_count < 1) { counters_frozen = false; mb(); mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~MMCR0_FC); FAIL_IF(core_busy_loop()); counters_frozen = true; mb(); mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) | MMCR0_FC); val = mfspr(SPRN_MMCR0); if (! (val & MMCR0_FC)) { printf("Outside of loop, FC NOT set MMCR0 0x%lx\n", val); fc_cleared = true; } } ebb_global_disable(); ebb_freeze_pmcs(); count_pmc(1, sample_period); dump_ebb_state(); printf("EBBs while frozen %d\n", ebbs_while_frozen); event_close(&event); FAIL_IF(ebb_state.stats.ebb_count == 0); FAIL_IF(fc_cleared); return 0; } int main(void) { return test_harness(cycles_with_freeze, "cycles_with_freeze"); }