Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Wang Nan | 990 | 97.63% | 2 | 25.00% |
Masami Hiramatsu | 9 | 0.89% | 2 | 25.00% |
Andrew Jeffery | 8 | 0.79% | 1 | 12.50% |
Kees Cook | 4 | 0.39% | 1 | 12.50% |
Thomas Gleixner | 2 | 0.20% | 1 | 12.50% |
Mathieu Desnoyers | 1 | 0.10% | 1 | 12.50% |
Total | 1014 | 8 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Kernel Probes Jump Optimization (Optprobes) * * Copyright (C) IBM Corporation, 2002, 2004 * Copyright (C) Hitachi Ltd., 2012 * Copyright (C) Huawei Inc., 2014 */ #include <linux/kprobes.h> #include <linux/jump_label.h> #include <asm/kprobes.h> #include <asm/cacheflush.h> /* for arm_gen_branch */ #include <asm/insn.h> /* for patch_text */ #include <asm/patch.h> #include "core.h" /* * See register_usage_flags. If the probed instruction doesn't use PC, * we can copy it into template and have it executed directly without * simulation or emulation. */ #define ARM_REG_PC 15 #define can_kprobe_direct_exec(m) (!test_bit(ARM_REG_PC, &(m))) /* * NOTE: the first sub and add instruction will be modified according * to the stack cost of the instruction. */ asm ( ".global optprobe_template_entry\n" "optprobe_template_entry:\n" ".global optprobe_template_sub_sp\n" "optprobe_template_sub_sp:" " sub sp, sp, #0xff\n" " stmia sp, {r0 - r14} \n" ".global optprobe_template_add_sp\n" "optprobe_template_add_sp:" " add r3, sp, #0xff\n" " str r3, [sp, #52]\n" " mrs r4, cpsr\n" " str r4, [sp, #64]\n" " mov r1, sp\n" " ldr r0, 1f\n" " ldr r2, 2f\n" /* * AEABI requires an 8-bytes alignment stack. If * SP % 8 != 0 (SP % 4 == 0 should be ensured), * alloc more bytes here. */ " and r4, sp, #4\n" " sub sp, sp, r4\n" #if __LINUX_ARM_ARCH__ >= 5 " blx r2\n" #else " mov lr, pc\n" " mov pc, r2\n" #endif " add sp, sp, r4\n" " ldr r1, [sp, #64]\n" " tst r1, #"__stringify(PSR_T_BIT)"\n" " ldrne r2, [sp, #60]\n" " orrne r2, #1\n" " strne r2, [sp, #60] @ set bit0 of PC for thumb\n" " msr cpsr_cxsf, r1\n" ".global optprobe_template_restore_begin\n" "optprobe_template_restore_begin:\n" " ldmia sp, {r0 - r15}\n" ".global optprobe_template_restore_orig_insn\n" "optprobe_template_restore_orig_insn:\n" " nop\n" ".global optprobe_template_restore_end\n" "optprobe_template_restore_end:\n" " nop\n" ".global optprobe_template_val\n" "optprobe_template_val:\n" "1: .long 0\n" ".global optprobe_template_call\n" "optprobe_template_call:\n" "2: .long 0\n" ".global optprobe_template_end\n" "optprobe_template_end:\n"); #define TMPL_VAL_IDX \ ((unsigned long *)optprobe_template_val - (unsigned long *)optprobe_template_entry) #define TMPL_CALL_IDX \ ((unsigned long *)optprobe_template_call - (unsigned long *)optprobe_template_entry) #define TMPL_END_IDX \ ((unsigned long *)optprobe_template_end - (unsigned long *)optprobe_template_entry) #define TMPL_ADD_SP \ ((unsigned long *)optprobe_template_add_sp - (unsigned long *)optprobe_template_entry) #define TMPL_SUB_SP \ ((unsigned long *)optprobe_template_sub_sp - (unsigned long *)optprobe_template_entry) #define TMPL_RESTORE_BEGIN \ ((unsigned long *)optprobe_template_restore_begin - (unsigned long *)optprobe_template_entry) #define TMPL_RESTORE_ORIGN_INSN \ ((unsigned long *)optprobe_template_restore_orig_insn - (unsigned long *)optprobe_template_entry) #define TMPL_RESTORE_END \ ((unsigned long *)optprobe_template_restore_end - (unsigned long *)optprobe_template_entry) /* * ARM can always optimize an instruction when using ARM ISA, except * instructions like 'str r0, [sp, r1]' which store to stack and unable * to determine stack space consumption statically. */ int arch_prepared_optinsn(struct arch_optimized_insn *optinsn) { return optinsn->insn != NULL; } /* * In ARM ISA, kprobe opt always replace one instruction (4 bytes * aligned and 4 bytes long). It is impossible to encounter another * kprobe in the address range. So always return 0. */ int arch_check_optimized_kprobe(struct optimized_kprobe *op) { return 0; } /* Caller must ensure addr & 3 == 0 */ static int can_optimize(struct kprobe *kp) { if (kp->ainsn.stack_space < 0) return 0; /* * 255 is the biggest imm can be used in 'sub r0, r0, #<imm>'. * Number larger than 255 needs special encoding. */ if (kp->ainsn.stack_space > 255 - sizeof(struct pt_regs)) return 0; return 1; } /* Free optimized instruction slot */ static void __arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty) { if (op->optinsn.insn) { free_optinsn_slot(op->optinsn.insn, dirty); op->optinsn.insn = NULL; } } extern void kprobe_handler(struct pt_regs *regs); static void optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs) { unsigned long flags; struct kprobe *p = &op->kp; struct kprobe_ctlblk *kcb; /* Save skipped registers */ regs->ARM_pc = (unsigned long)op->kp.addr; regs->ARM_ORIG_r0 = ~0UL; local_irq_save(flags); kcb = get_kprobe_ctlblk(); if (kprobe_running()) { kprobes_inc_nmissed_count(&op->kp); } else { __this_cpu_write(current_kprobe, &op->kp); kcb->kprobe_status = KPROBE_HIT_ACTIVE; opt_pre_handler(&op->kp, regs); __this_cpu_write(current_kprobe, NULL); } /* * We singlestep the replaced instruction only when it can't be * executed directly during restore. */ if (!p->ainsn.kprobe_direct_exec) op->kp.ainsn.insn_singlestep(p->opcode, &p->ainsn, regs); local_irq_restore(flags); } NOKPROBE_SYMBOL(optimized_callback) int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *orig) { kprobe_opcode_t *code; unsigned long rel_chk; unsigned long val; unsigned long stack_protect = sizeof(struct pt_regs); if (!can_optimize(orig)) return -EILSEQ; code = get_optinsn_slot(); if (!code) return -ENOMEM; /* * Verify if the address gap is in 32MiB range, because this uses * a relative jump. * * kprobe opt use a 'b' instruction to branch to optinsn.insn. * According to ARM manual, branch instruction is: * * 31 28 27 24 23 0 * +------+---+---+---+---+----------------+ * | cond | 1 | 0 | 1 | 0 | imm24 | * +------+---+---+---+---+----------------+ * * imm24 is a signed 24 bits integer. The real branch offset is computed * by: imm32 = SignExtend(imm24:'00', 32); * * So the maximum forward branch should be: * (0x007fffff << 2) = 0x01fffffc = 0x1fffffc * The maximum backword branch should be: * (0xff800000 << 2) = 0xfe000000 = -0x2000000 * * We can simply check (rel & 0xfe000003): * if rel is positive, (rel & 0xfe000000) shoule be 0 * if rel is negitive, (rel & 0xfe000000) should be 0xfe000000 * the last '3' is used for alignment checking. */ rel_chk = (unsigned long)((long)code - (long)orig->addr + 8) & 0xfe000003; if ((rel_chk != 0) && (rel_chk != 0xfe000000)) { /* * Different from x86, we free code buf directly instead of * calling __arch_remove_optimized_kprobe() because * we have not fill any field in op. */ free_optinsn_slot(code, 0); return -ERANGE; } /* Copy arch-dep-instance from template. */ memcpy(code, (unsigned long *)optprobe_template_entry, TMPL_END_IDX * sizeof(kprobe_opcode_t)); /* Adjust buffer according to instruction. */ BUG_ON(orig->ainsn.stack_space < 0); stack_protect += orig->ainsn.stack_space; /* Should have been filtered by can_optimize(). */ BUG_ON(stack_protect > 255); /* Create a 'sub sp, sp, #<stack_protect>' */ code[TMPL_SUB_SP] = __opcode_to_mem_arm(0xe24dd000 | stack_protect); /* Create a 'add r3, sp, #<stack_protect>' */ code[TMPL_ADD_SP] = __opcode_to_mem_arm(0xe28d3000 | stack_protect); /* Set probe information */ val = (unsigned long)op; code[TMPL_VAL_IDX] = val; /* Set probe function call */ val = (unsigned long)optimized_callback; code[TMPL_CALL_IDX] = val; /* If possible, copy insn and have it executed during restore */ orig->ainsn.kprobe_direct_exec = false; if (can_kprobe_direct_exec(orig->ainsn.register_usage_flags)) { kprobe_opcode_t final_branch = arm_gen_branch( (unsigned long)(&code[TMPL_RESTORE_END]), (unsigned long)(op->kp.addr) + 4); if (final_branch != 0) { /* * Replace original 'ldmia sp, {r0 - r15}' with * 'ldmia {r0 - r14}', restore all registers except pc. */ code[TMPL_RESTORE_BEGIN] = __opcode_to_mem_arm(0xe89d7fff); /* The original probed instruction */ code[TMPL_RESTORE_ORIGN_INSN] = __opcode_to_mem_arm(orig->opcode); /* Jump back to next instruction */ code[TMPL_RESTORE_END] = __opcode_to_mem_arm(final_branch); orig->ainsn.kprobe_direct_exec = true; } } flush_icache_range((unsigned long)code, (unsigned long)(&code[TMPL_END_IDX])); /* Set op->optinsn.insn means prepared. */ op->optinsn.insn = code; return 0; } void __kprobes arch_optimize_kprobes(struct list_head *oplist) { struct optimized_kprobe *op, *tmp; list_for_each_entry_safe(op, tmp, oplist, list) { unsigned long insn; WARN_ON(kprobe_disabled(&op->kp)); /* * Backup instructions which will be replaced * by jump address */ memcpy(op->optinsn.copied_insn, op->kp.addr, RELATIVEJUMP_SIZE); insn = arm_gen_branch((unsigned long)op->kp.addr, (unsigned long)op->optinsn.insn); BUG_ON(insn == 0); /* * Make it a conditional branch if replaced insn * is consitional */ insn = (__mem_to_opcode_arm( op->optinsn.copied_insn[0]) & 0xf0000000) | (insn & 0x0fffffff); /* * Similar to __arch_disarm_kprobe, operations which * removing breakpoints must be wrapped by stop_machine * to avoid racing. */ kprobes_remove_breakpoint(op->kp.addr, insn); list_del_init(&op->list); } } void arch_unoptimize_kprobe(struct optimized_kprobe *op) { arch_arm_kprobe(&op->kp); } /* * Recover original instructions and breakpoints from relative jumps. * Caller must call with locking kprobe_mutex. */ void arch_unoptimize_kprobes(struct list_head *oplist, struct list_head *done_list) { struct optimized_kprobe *op, *tmp; list_for_each_entry_safe(op, tmp, oplist, list) { arch_unoptimize_kprobe(op); list_move(&op->list, done_list); } } int arch_within_optimized_kprobe(struct optimized_kprobe *op, unsigned long addr) { return ((unsigned long)op->kp.addr <= addr && (unsigned long)op->kp.addr + RELATIVEJUMP_SIZE > addr); } void arch_remove_optimized_kprobe(struct optimized_kprobe *op) { __arch_remove_optimized_kprobe(op, 1); }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1