Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Sergey Ryazanov | 1378 | 98.22% | 7 | 58.33% |
Afzal Mohammed | 15 | 1.07% | 1 | 8.33% |
Thomas Bogendoerfer | 4 | 0.29% | 1 | 8.33% |
Christoph Hellwig | 3 | 0.21% | 1 | 8.33% |
Jiang Liu | 2 | 0.14% | 1 | 8.33% |
Thomas Gleixner | 1 | 0.07% | 1 | 8.33% |
Total | 1403 | 12 |
/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. * Copyright (C) 2006 FON Technology, SL. * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org> * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com> */ /* * Platform devices for Atheros AR5312 SoCs */ #include <linux/init.h> #include <linux/kernel.h> #include <linux/bitops.h> #include <linux/irqdomain.h> #include <linux/interrupt.h> #include <linux/memblock.h> #include <linux/platform_device.h> #include <linux/mtd/physmap.h> #include <linux/reboot.h> #include <asm/bootinfo.h> #include <asm/reboot.h> #include <asm/time.h> #include <ath25_platform.h> #include "devices.h" #include "ar5312.h" #include "ar5312_regs.h" static void __iomem *ar5312_rst_base; static struct irq_domain *ar5312_misc_irq_domain; static inline u32 ar5312_rst_reg_read(u32 reg) { return __raw_readl(ar5312_rst_base + reg); } static inline void ar5312_rst_reg_write(u32 reg, u32 val) { __raw_writel(val, ar5312_rst_base + reg); } static inline void ar5312_rst_reg_mask(u32 reg, u32 mask, u32 val) { u32 ret = ar5312_rst_reg_read(reg); ret &= ~mask; ret |= val; ar5312_rst_reg_write(reg, ret); } static irqreturn_t ar5312_ahb_err_handler(int cpl, void *dev_id) { u32 proc1 = ar5312_rst_reg_read(AR5312_PROC1); u32 proc_addr = ar5312_rst_reg_read(AR5312_PROCADDR); /* clears error */ u32 dma1 = ar5312_rst_reg_read(AR5312_DMA1); u32 dma_addr = ar5312_rst_reg_read(AR5312_DMAADDR); /* clears error */ pr_emerg("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n", proc_addr, proc1, dma_addr, dma1); machine_restart("AHB error"); /* Catastrophic failure */ return IRQ_HANDLED; } static void ar5312_misc_irq_handler(struct irq_desc *desc) { u32 pending = ar5312_rst_reg_read(AR5312_ISR) & ar5312_rst_reg_read(AR5312_IMR); unsigned nr, misc_irq = 0; if (pending) { struct irq_domain *domain = irq_desc_get_handler_data(desc); nr = __ffs(pending); misc_irq = irq_find_mapping(domain, nr); } if (misc_irq) { generic_handle_irq(misc_irq); if (nr == AR5312_MISC_IRQ_TIMER) ar5312_rst_reg_read(AR5312_TIMER); } else { spurious_interrupt(); } } /* Enable the specified AR5312_MISC_IRQ interrupt */ static void ar5312_misc_irq_unmask(struct irq_data *d) { ar5312_rst_reg_mask(AR5312_IMR, 0, BIT(d->hwirq)); } /* Disable the specified AR5312_MISC_IRQ interrupt */ static void ar5312_misc_irq_mask(struct irq_data *d) { ar5312_rst_reg_mask(AR5312_IMR, BIT(d->hwirq), 0); ar5312_rst_reg_read(AR5312_IMR); /* flush write buffer */ } static struct irq_chip ar5312_misc_irq_chip = { .name = "ar5312-misc", .irq_unmask = ar5312_misc_irq_unmask, .irq_mask = ar5312_misc_irq_mask, }; static int ar5312_misc_irq_map(struct irq_domain *d, unsigned irq, irq_hw_number_t hw) { irq_set_chip_and_handler(irq, &ar5312_misc_irq_chip, handle_level_irq); return 0; } static struct irq_domain_ops ar5312_misc_irq_domain_ops = { .map = ar5312_misc_irq_map, }; static void ar5312_irq_dispatch(void) { u32 pending = read_c0_status() & read_c0_cause(); if (pending & CAUSEF_IP2) do_IRQ(AR5312_IRQ_WLAN0); else if (pending & CAUSEF_IP5) do_IRQ(AR5312_IRQ_WLAN1); else if (pending & CAUSEF_IP6) do_IRQ(AR5312_IRQ_MISC); else if (pending & CAUSEF_IP7) do_IRQ(ATH25_IRQ_CPU_CLOCK); else spurious_interrupt(); } void __init ar5312_arch_init_irq(void) { struct irq_domain *domain; unsigned irq; ath25_irq_dispatch = ar5312_irq_dispatch; domain = irq_domain_add_linear(NULL, AR5312_MISC_IRQ_COUNT, &ar5312_misc_irq_domain_ops, NULL); if (!domain) panic("Failed to add IRQ domain"); irq = irq_create_mapping(domain, AR5312_MISC_IRQ_AHB_PROC); if (request_irq(irq, ar5312_ahb_err_handler, 0, "ar5312-ahb-error", NULL)) pr_err("Failed to register ar5312-ahb-error interrupt\n"); irq_set_chained_handler_and_data(AR5312_IRQ_MISC, ar5312_misc_irq_handler, domain); ar5312_misc_irq_domain = domain; } static struct physmap_flash_data ar5312_flash_data = { .width = 2, }; static struct resource ar5312_flash_resource = { .start = AR5312_FLASH_BASE, .end = AR5312_FLASH_BASE + AR5312_FLASH_SIZE - 1, .flags = IORESOURCE_MEM, }; static struct platform_device ar5312_physmap_flash = { .name = "physmap-flash", .id = 0, .dev.platform_data = &ar5312_flash_data, .resource = &ar5312_flash_resource, .num_resources = 1, }; static void __init ar5312_flash_init(void) { void __iomem *flashctl_base; u32 ctl; flashctl_base = ioremap(AR5312_FLASHCTL_BASE, AR5312_FLASHCTL_SIZE); ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL0); ctl &= AR5312_FLASHCTL_MW; /* fixup flash width */ switch (ctl) { case AR5312_FLASHCTL_MW16: ar5312_flash_data.width = 2; break; case AR5312_FLASHCTL_MW8: default: ar5312_flash_data.width = 1; break; } /* * Configure flash bank 0. * Assume 8M window size. Flash will be aliased if it's smaller */ ctl |= AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC_8M | AR5312_FLASHCTL_RBLE; ctl |= 0x01 << AR5312_FLASHCTL_IDCY_S; ctl |= 0x07 << AR5312_FLASHCTL_WST1_S; ctl |= 0x07 << AR5312_FLASHCTL_WST2_S; __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL0); /* Disable other flash banks */ ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL1); ctl &= ~(AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC); __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL1); ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL2); ctl &= ~(AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC); __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL2); iounmap(flashctl_base); } void __init ar5312_init_devices(void) { struct ath25_boarddata *config; ar5312_flash_init(); /* Locate board/radio config data */ ath25_find_config(AR5312_FLASH_BASE, AR5312_FLASH_SIZE); config = ath25_board.config; /* AR2313 has CPU minor rev. 10 */ if ((current_cpu_data.processor_id & 0xff) == 0x0a) ath25_soc = ATH25_SOC_AR2313; /* AR2312 shares the same Silicon ID as AR5312 */ else if (config->flags & BD_ISCASPER) ath25_soc = ATH25_SOC_AR2312; /* Everything else is probably AR5312 or compatible */ else ath25_soc = ATH25_SOC_AR5312; platform_device_register(&ar5312_physmap_flash); switch (ath25_soc) { case ATH25_SOC_AR5312: if (!ath25_board.radio) return; if (!(config->flags & BD_WLAN0)) break; ath25_add_wmac(0, AR5312_WLAN0_BASE, AR5312_IRQ_WLAN0); break; case ATH25_SOC_AR2312: case ATH25_SOC_AR2313: if (!ath25_board.radio) return; break; default: break; } if (config->flags & BD_WLAN1) ath25_add_wmac(1, AR5312_WLAN1_BASE, AR5312_IRQ_WLAN1); } static void ar5312_restart(char *command) { /* reset the system */ local_irq_disable(); while (1) ar5312_rst_reg_write(AR5312_RESET, AR5312_RESET_SYSTEM); } /* * This table is indexed by bits 5..4 of the CLOCKCTL1 register * to determine the predevisor value. */ static unsigned clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 }; static unsigned __init ar5312_cpu_frequency(void) { u32 scratch, devid, clock_ctl1; u32 predivide_mask, multiplier_mask, doubler_mask; unsigned predivide_shift, multiplier_shift; unsigned predivide_select, predivisor, multiplier; /* Trust the bootrom's idea of cpu frequency. */ scratch = ar5312_rst_reg_read(AR5312_SCRATCH); if (scratch) return scratch; devid = ar5312_rst_reg_read(AR5312_REV); devid = (devid & AR5312_REV_MAJ) >> AR5312_REV_MAJ_S; if (devid == AR5312_REV_MAJ_AR2313) { predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK; predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT; multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK; multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT; doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK; } else { /* AR5312 and AR2312 */ predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK; predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT; multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK; multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT; doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK; } /* * Clocking is derived from a fixed 40MHz input clock. * * cpu_freq = input_clock * MULT (where MULT is PLL multiplier) * sys_freq = cpu_freq / 4 (used for APB clock, serial, * flash, Timer, Watchdog Timer) * * cnt_freq = cpu_freq / 2 (use for CPU count/compare) * * So, for example, with a PLL multiplier of 5, we have * * cpu_freq = 200MHz * sys_freq = 50MHz * cnt_freq = 100MHz * * We compute the CPU frequency, based on PLL settings. */ clock_ctl1 = ar5312_rst_reg_read(AR5312_CLOCKCTL1); predivide_select = (clock_ctl1 & predivide_mask) >> predivide_shift; predivisor = clockctl1_predivide_table[predivide_select]; multiplier = (clock_ctl1 & multiplier_mask) >> multiplier_shift; if (clock_ctl1 & doubler_mask) multiplier <<= 1; return (40000000 / predivisor) * multiplier; } static inline unsigned ar5312_sys_frequency(void) { return ar5312_cpu_frequency() / 4; } void __init ar5312_plat_time_init(void) { mips_hpt_frequency = ar5312_cpu_frequency() / 2; } void __init ar5312_plat_mem_setup(void) { void __iomem *sdram_base; u32 memsize, memcfg, bank0_ac, bank1_ac; u32 devid; /* Detect memory size */ sdram_base = ioremap(AR5312_SDRAMCTL_BASE, AR5312_SDRAMCTL_SIZE); memcfg = __raw_readl(sdram_base + AR5312_MEM_CFG1); bank0_ac = ATH25_REG_MS(memcfg, AR5312_MEM_CFG1_AC0); bank1_ac = ATH25_REG_MS(memcfg, AR5312_MEM_CFG1_AC1); memsize = (bank0_ac ? (1 << (bank0_ac + 1)) : 0) + (bank1_ac ? (1 << (bank1_ac + 1)) : 0); memsize <<= 20; memblock_add(0, memsize); iounmap(sdram_base); ar5312_rst_base = ioremap(AR5312_RST_BASE, AR5312_RST_SIZE); devid = ar5312_rst_reg_read(AR5312_REV); devid >>= AR5312_REV_WMAC_MIN_S; devid &= AR5312_REV_CHIP; ath25_board.devid = (u16)devid; /* Clear any lingering AHB errors */ ar5312_rst_reg_read(AR5312_PROCADDR); ar5312_rst_reg_read(AR5312_DMAADDR); ar5312_rst_reg_write(AR5312_WDT_CTRL, AR5312_WDT_CTRL_IGNORE); _machine_restart = ar5312_restart; } void __init ar5312_arch_init(void) { unsigned irq = irq_create_mapping(ar5312_misc_irq_domain, AR5312_MISC_IRQ_UART0); ath25_serial_setup(AR5312_UART0_BASE, irq, ar5312_sys_frequency()); }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1