Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Christophe Leroy | 690 | 100.00% | 8 | 100.00% |
Total | 690 | 8 |
// SPDX-License-Identifier: GPL-2.0-or-later #include <linux/highmem.h> #include <linux/kprobes.h> /** * flush_coherent_icache() - if a CPU has a coherent icache, flush it * Return true if the cache was flushed, false otherwise */ static inline bool flush_coherent_icache(void) { /* * For a snooping icache, we still need a dummy icbi to purge all the * prefetched instructions from the ifetch buffers. We also need a sync * before the icbi to order the the actual stores to memory that might * have modified instructions with the icbi. */ if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) { mb(); /* sync */ icbi((void *)PAGE_OFFSET); mb(); /* sync */ isync(); return true; } return false; } /** * invalidate_icache_range() - Flush the icache by issuing icbi across an address range * @start: the start address * @stop: the stop address (exclusive) */ static void invalidate_icache_range(unsigned long start, unsigned long stop) { unsigned long shift = l1_icache_shift(); unsigned long bytes = l1_icache_bytes(); char *addr = (char *)(start & ~(bytes - 1)); unsigned long size = stop - (unsigned long)addr + (bytes - 1); unsigned long i; for (i = 0; i < size >> shift; i++, addr += bytes) icbi(addr); mb(); /* sync */ isync(); } /** * flush_icache_range: Write any modified data cache blocks out to memory * and invalidate the corresponding blocks in the instruction cache * * Generic code will call this after writing memory, before executing from it. * * @start: the start address * @stop: the stop address (exclusive) */ void flush_icache_range(unsigned long start, unsigned long stop) { if (flush_coherent_icache()) return; clean_dcache_range(start, stop); if (IS_ENABLED(CONFIG_44x)) { /* * Flash invalidate on 44x because we are passed kmapped * addresses and this doesn't work for userspace pages due to * the virtually tagged icache. */ iccci((void *)start); mb(); /* sync */ isync(); } else invalidate_icache_range(start, stop); } EXPORT_SYMBOL(flush_icache_range); #ifdef CONFIG_HIGHMEM /** * flush_dcache_icache_phys() - Flush a page by it's physical address * @physaddr: the physical address of the page */ static void flush_dcache_icache_phys(unsigned long physaddr) { unsigned long bytes = l1_dcache_bytes(); unsigned long nb = PAGE_SIZE / bytes; unsigned long addr = physaddr & PAGE_MASK; unsigned long msr, msr0; unsigned long loop1 = addr, loop2 = addr; msr0 = mfmsr(); msr = msr0 & ~MSR_DR; /* * This must remain as ASM to prevent potential memory accesses * while the data MMU is disabled */ asm volatile( " mtctr %2;\n" " mtmsr %3;\n" " isync;\n" "0: dcbst 0, %0;\n" " addi %0, %0, %4;\n" " bdnz 0b;\n" " sync;\n" " mtctr %2;\n" "1: icbi 0, %1;\n" " addi %1, %1, %4;\n" " bdnz 1b;\n" " sync;\n" " mtmsr %5;\n" " isync;\n" : "+&r" (loop1), "+&r" (loop2) : "r" (nb), "r" (msr), "i" (bytes), "r" (msr0) : "ctr", "memory"); } NOKPROBE_SYMBOL(flush_dcache_icache_phys) #else static void flush_dcache_icache_phys(unsigned long physaddr) { } #endif /** * __flush_dcache_icache(): Flush a particular page from the data cache to RAM. * Note: this is necessary because the instruction cache does *not* * snoop from the data cache. * * @p: the address of the page to flush */ static void __flush_dcache_icache(void *p) { unsigned long addr = (unsigned long)p & PAGE_MASK; clean_dcache_range(addr, addr + PAGE_SIZE); /* * We don't flush the icache on 44x. Those have a virtual icache and we * don't have access to the virtual address here (it's not the page * vaddr but where it's mapped in user space). The flushing of the * icache on these is handled elsewhere, when a change in the address * space occurs, before returning to user space. */ if (mmu_has_feature(MMU_FTR_TYPE_44x)) return; invalidate_icache_range(addr, addr + PAGE_SIZE); } static void flush_dcache_icache_hugepage(struct page *page) { int i; int nr = compound_nr(page); if (!PageHighMem(page)) { for (i = 0; i < nr; i++) __flush_dcache_icache(lowmem_page_address(page + i)); } else { for (i = 0; i < nr; i++) { void *start = kmap_local_page(page + i); __flush_dcache_icache(start); kunmap_local(start); } } } void flush_dcache_icache_page(struct page *page) { if (flush_coherent_icache()) return; if (PageCompound(page)) return flush_dcache_icache_hugepage(page); if (!PageHighMem(page)) { __flush_dcache_icache(lowmem_page_address(page)); } else if (IS_ENABLED(CONFIG_BOOKE) || sizeof(phys_addr_t) > sizeof(void *)) { void *start = kmap_local_page(page); __flush_dcache_icache(start); kunmap_local(start); } else { flush_dcache_icache_phys(page_to_phys(page)); } } EXPORT_SYMBOL(flush_dcache_icache_page); void clear_user_page(void *page, unsigned long vaddr, struct page *pg) { clear_page(page); /* * We shouldn't have to do this, but some versions of glibc * require it (ld.so assumes zero filled pages are icache clean) * - Anton */ flush_dcache_page(pg); } EXPORT_SYMBOL(clear_user_page); void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, struct page *pg) { copy_page(vto, vfrom); /* * We should be able to use the following optimisation, however * there are two problems. * Firstly a bug in some versions of binutils meant PLT sections * were not marked executable. * Secondly the first word in the GOT section is blrl, used * to establish the GOT address. Until recently the GOT was * not marked executable. * - Anton */ #if 0 if (!vma->vm_file && ((vma->vm_flags & VM_EXEC) == 0)) return; #endif flush_dcache_page(pg); } void flush_icache_user_page(struct vm_area_struct *vma, struct page *page, unsigned long addr, int len) { void *maddr; maddr = kmap_local_page(page) + (addr & ~PAGE_MASK); flush_icache_range((unsigned long)maddr, (unsigned long)maddr + len); kunmap_local(maddr); }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1