Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Paul Mackerras | 12635 | 93.73% | 3 | 7.14% |
Benjamin Herrenschmidt | 539 | 4.00% | 11 | 26.19% |
Stephen Rothwell | 96 | 0.71% | 4 | 9.52% |
Rob Herring | 42 | 0.31% | 3 | 7.14% |
Olof Johansson | 31 | 0.23% | 2 | 4.76% |
Olaf Hering | 25 | 0.19% | 1 | 2.38% |
Roel Kluin | 24 | 0.18% | 2 | 4.76% |
Michael Ellerman | 21 | 0.16% | 1 | 2.38% |
Grant C. Likely | 21 | 0.16% | 3 | 7.14% |
Segher Boessenkool | 14 | 0.10% | 1 | 2.38% |
Jeremy Kerr | 8 | 0.06% | 1 | 2.38% |
Thomas Gleixner | 5 | 0.04% | 2 | 4.76% |
Paul Gortmaker | 3 | 0.02% | 1 | 2.38% |
Sinan Kaya | 3 | 0.02% | 1 | 2.38% |
Dmitry Torokhov | 3 | 0.02% | 1 | 2.38% |
Adam Buchbinder | 3 | 0.02% | 1 | 2.38% |
Gustavo A. R. Silva | 2 | 0.01% | 1 | 2.38% |
Al Viro | 2 | 0.01% | 1 | 2.38% |
Stoyan Gaydarov | 2 | 0.01% | 1 | 2.38% |
Christophe Leroy | 1 | 0.01% | 1 | 2.38% |
Total | 13480 | 42 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au) * Ben. Herrenschmidt (benh@kernel.crashing.org) * * TODO: * * - Replace mdelay with some schedule loop if possible * - Shorten some obfuscated delays on some routines (like modem * power) * - Refcount some clocks (see darwin) * - Split split split... */ #include <linux/types.h> #include <linux/init.h> #include <linux/delay.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/spinlock.h> #include <linux/adb.h> #include <linux/pmu.h> #include <linux/ioport.h> #include <linux/export.h> #include <linux/pci.h> #include <asm/sections.h> #include <asm/errno.h> #include <asm/ohare.h> #include <asm/heathrow.h> #include <asm/keylargo.h> #include <asm/uninorth.h> #include <asm/io.h> #include <asm/prom.h> #include <asm/machdep.h> #include <asm/pmac_feature.h> #include <asm/dbdma.h> #include <asm/pci-bridge.h> #include <asm/pmac_low_i2c.h> #undef DEBUG_FEATURE #ifdef DEBUG_FEATURE #define DBG(fmt...) printk(KERN_DEBUG fmt) #else #define DBG(fmt...) #endif #ifdef CONFIG_PPC_BOOK3S_32 extern int powersave_lowspeed; #endif extern int powersave_nap; extern struct device_node *k2_skiplist[2]; /* * We use a single global lock to protect accesses. Each driver has * to take care of its own locking */ DEFINE_RAW_SPINLOCK(feature_lock); #define LOCK(flags) raw_spin_lock_irqsave(&feature_lock, flags); #define UNLOCK(flags) raw_spin_unlock_irqrestore(&feature_lock, flags); /* * Instance of some macio stuffs */ struct macio_chip macio_chips[MAX_MACIO_CHIPS]; struct macio_chip *macio_find(struct device_node *child, int type) { while(child) { int i; for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++) if (child == macio_chips[i].of_node && (!type || macio_chips[i].type == type)) return &macio_chips[i]; child = child->parent; } return NULL; } EXPORT_SYMBOL_GPL(macio_find); static const char *macio_names[] = { "Unknown", "Grand Central", "OHare", "OHareII", "Heathrow", "Gatwick", "Paddington", "Keylargo", "Pangea", "Intrepid", "K2", "Shasta", }; struct device_node *uninorth_node; u32 __iomem *uninorth_base; static u32 uninorth_rev; static int uninorth_maj; static void __iomem *u3_ht_base; /* * For each motherboard family, we have a table of functions pointers * that handle the various features. */ typedef long (*feature_call)(struct device_node *node, long param, long value); struct feature_table_entry { unsigned int selector; feature_call function; }; struct pmac_mb_def { const char* model_string; const char* model_name; int model_id; struct feature_table_entry* features; unsigned long board_flags; }; static struct pmac_mb_def pmac_mb; /* * Here are the chip specific feature functions */ static inline int simple_feature_tweak(struct device_node *node, int type, int reg, u32 mask, int value) { struct macio_chip* macio; unsigned long flags; macio = macio_find(node, type); if (!macio) return -ENODEV; LOCK(flags); if (value) MACIO_BIS(reg, mask); else MACIO_BIC(reg, mask); (void)MACIO_IN32(reg); UNLOCK(flags); return 0; } #ifndef CONFIG_PPC64 static long ohare_htw_scc_enable(struct device_node *node, long param, long value) { struct macio_chip* macio; unsigned long chan_mask; unsigned long fcr; unsigned long flags; int htw, trans; unsigned long rmask; macio = macio_find(node, 0); if (!macio) return -ENODEV; if (of_node_name_eq(node, "ch-a")) chan_mask = MACIO_FLAG_SCCA_ON; else if (of_node_name_eq(node, "ch-b")) chan_mask = MACIO_FLAG_SCCB_ON; else return -ENODEV; htw = (macio->type == macio_heathrow || macio->type == macio_paddington || macio->type == macio_gatwick); /* On these machines, the HRW_SCC_TRANS_EN_N bit mustn't be touched */ trans = (pmac_mb.model_id != PMAC_TYPE_YOSEMITE && pmac_mb.model_id != PMAC_TYPE_YIKES); if (value) { #ifdef CONFIG_ADB_PMU if ((param & 0xfff) == PMAC_SCC_IRDA) pmu_enable_irled(1); #endif /* CONFIG_ADB_PMU */ LOCK(flags); fcr = MACIO_IN32(OHARE_FCR); /* Check if scc cell need enabling */ if (!(fcr & OH_SCC_ENABLE)) { fcr |= OH_SCC_ENABLE; if (htw) { /* Side effect: this will also power up the * modem, but it's too messy to figure out on which * ports this controls the transceiver and on which * it controls the modem */ if (trans) fcr &= ~HRW_SCC_TRANS_EN_N; MACIO_OUT32(OHARE_FCR, fcr); fcr |= (rmask = HRW_RESET_SCC); MACIO_OUT32(OHARE_FCR, fcr); } else { fcr |= (rmask = OH_SCC_RESET); MACIO_OUT32(OHARE_FCR, fcr); } UNLOCK(flags); (void)MACIO_IN32(OHARE_FCR); mdelay(15); LOCK(flags); fcr &= ~rmask; MACIO_OUT32(OHARE_FCR, fcr); } if (chan_mask & MACIO_FLAG_SCCA_ON) fcr |= OH_SCCA_IO; if (chan_mask & MACIO_FLAG_SCCB_ON) fcr |= OH_SCCB_IO; MACIO_OUT32(OHARE_FCR, fcr); macio->flags |= chan_mask; UNLOCK(flags); if (param & PMAC_SCC_FLAG_XMON) macio->flags |= MACIO_FLAG_SCC_LOCKED; } else { if (macio->flags & MACIO_FLAG_SCC_LOCKED) return -EPERM; LOCK(flags); fcr = MACIO_IN32(OHARE_FCR); if (chan_mask & MACIO_FLAG_SCCA_ON) fcr &= ~OH_SCCA_IO; if (chan_mask & MACIO_FLAG_SCCB_ON) fcr &= ~OH_SCCB_IO; MACIO_OUT32(OHARE_FCR, fcr); if ((fcr & (OH_SCCA_IO | OH_SCCB_IO)) == 0) { fcr &= ~OH_SCC_ENABLE; if (htw && trans) fcr |= HRW_SCC_TRANS_EN_N; MACIO_OUT32(OHARE_FCR, fcr); } macio->flags &= ~(chan_mask); UNLOCK(flags); mdelay(10); #ifdef CONFIG_ADB_PMU if ((param & 0xfff) == PMAC_SCC_IRDA) pmu_enable_irled(0); #endif /* CONFIG_ADB_PMU */ } return 0; } static long ohare_floppy_enable(struct device_node *node, long param, long value) { return simple_feature_tweak(node, macio_ohare, OHARE_FCR, OH_FLOPPY_ENABLE, value); } static long ohare_mesh_enable(struct device_node *node, long param, long value) { return simple_feature_tweak(node, macio_ohare, OHARE_FCR, OH_MESH_ENABLE, value); } static long ohare_ide_enable(struct device_node *node, long param, long value) { switch(param) { case 0: /* For some reason, setting the bit in set_initial_features() * doesn't stick. I'm still investigating... --BenH. */ if (value) simple_feature_tweak(node, macio_ohare, OHARE_FCR, OH_IOBUS_ENABLE, 1); return simple_feature_tweak(node, macio_ohare, OHARE_FCR, OH_IDE0_ENABLE, value); case 1: return simple_feature_tweak(node, macio_ohare, OHARE_FCR, OH_BAY_IDE_ENABLE, value); default: return -ENODEV; } } static long ohare_ide_reset(struct device_node *node, long param, long value) { switch(param) { case 0: return simple_feature_tweak(node, macio_ohare, OHARE_FCR, OH_IDE0_RESET_N, !value); case 1: return simple_feature_tweak(node, macio_ohare, OHARE_FCR, OH_IDE1_RESET_N, !value); default: return -ENODEV; } } static long ohare_sleep_state(struct device_node *node, long param, long value) { struct macio_chip* macio = &macio_chips[0]; if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) return -EPERM; if (value == 1) { MACIO_BIC(OHARE_FCR, OH_IOBUS_ENABLE); } else if (value == 0) { MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); } return 0; } static long heathrow_modem_enable(struct device_node *node, long param, long value) { struct macio_chip* macio; u8 gpio; unsigned long flags; macio = macio_find(node, macio_unknown); if (!macio) return -ENODEV; gpio = MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1; if (!value) { LOCK(flags); MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio); UNLOCK(flags); (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); mdelay(250); } if (pmac_mb.model_id != PMAC_TYPE_YOSEMITE && pmac_mb.model_id != PMAC_TYPE_YIKES) { LOCK(flags); if (value) MACIO_BIC(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); else MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); UNLOCK(flags); (void)MACIO_IN32(HEATHROW_FCR); mdelay(250); } if (value) { LOCK(flags); MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1); (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); UNLOCK(flags); mdelay(250); LOCK(flags); MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio); (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); UNLOCK(flags); mdelay(250); LOCK(flags); MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1); (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); UNLOCK(flags); mdelay(250); } return 0; } static long heathrow_floppy_enable(struct device_node *node, long param, long value) { return simple_feature_tweak(node, macio_unknown, HEATHROW_FCR, HRW_SWIM_ENABLE|HRW_BAY_FLOPPY_ENABLE, value); } static long heathrow_mesh_enable(struct device_node *node, long param, long value) { struct macio_chip* macio; unsigned long flags; macio = macio_find(node, macio_unknown); if (!macio) return -ENODEV; LOCK(flags); /* Set clear mesh cell enable */ if (value) MACIO_BIS(HEATHROW_FCR, HRW_MESH_ENABLE); else MACIO_BIC(HEATHROW_FCR, HRW_MESH_ENABLE); (void)MACIO_IN32(HEATHROW_FCR); udelay(10); /* Set/Clear termination power */ if (value) MACIO_BIC(HEATHROW_MBCR, 0x04000000); else MACIO_BIS(HEATHROW_MBCR, 0x04000000); (void)MACIO_IN32(HEATHROW_MBCR); udelay(10); UNLOCK(flags); return 0; } static long heathrow_ide_enable(struct device_node *node, long param, long value) { switch(param) { case 0: return simple_feature_tweak(node, macio_unknown, HEATHROW_FCR, HRW_IDE0_ENABLE, value); case 1: return simple_feature_tweak(node, macio_unknown, HEATHROW_FCR, HRW_BAY_IDE_ENABLE, value); default: return -ENODEV; } } static long heathrow_ide_reset(struct device_node *node, long param, long value) { switch(param) { case 0: return simple_feature_tweak(node, macio_unknown, HEATHROW_FCR, HRW_IDE0_RESET_N, !value); case 1: return simple_feature_tweak(node, macio_unknown, HEATHROW_FCR, HRW_IDE1_RESET_N, !value); default: return -ENODEV; } } static long heathrow_bmac_enable(struct device_node *node, long param, long value) { struct macio_chip* macio; unsigned long flags; macio = macio_find(node, 0); if (!macio) return -ENODEV; if (value) { LOCK(flags); MACIO_BIS(HEATHROW_FCR, HRW_BMAC_IO_ENABLE); MACIO_BIS(HEATHROW_FCR, HRW_BMAC_RESET); UNLOCK(flags); (void)MACIO_IN32(HEATHROW_FCR); mdelay(10); LOCK(flags); MACIO_BIC(HEATHROW_FCR, HRW_BMAC_RESET); UNLOCK(flags); (void)MACIO_IN32(HEATHROW_FCR); mdelay(10); } else { LOCK(flags); MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE); UNLOCK(flags); } return 0; } static long heathrow_sound_enable(struct device_node *node, long param, long value) { struct macio_chip* macio; unsigned long flags; /* B&W G3 and Yikes don't support that properly (the * sound appear to never come back after being shut down). */ if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE || pmac_mb.model_id == PMAC_TYPE_YIKES) return 0; macio = macio_find(node, 0); if (!macio) return -ENODEV; if (value) { LOCK(flags); MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N); UNLOCK(flags); (void)MACIO_IN32(HEATHROW_FCR); } else { LOCK(flags); MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N); MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); UNLOCK(flags); } return 0; } static u32 save_fcr[6]; static u32 save_mbcr; static struct dbdma_regs save_dbdma[13]; static struct dbdma_regs save_alt_dbdma[13]; static void dbdma_save(struct macio_chip *macio, struct dbdma_regs *save) { int i; /* Save state & config of DBDMA channels */ for (i = 0; i < 13; i++) { volatile struct dbdma_regs __iomem * chan = (void __iomem *) (macio->base + ((0x8000+i*0x100)>>2)); save[i].cmdptr_hi = in_le32(&chan->cmdptr_hi); save[i].cmdptr = in_le32(&chan->cmdptr); save[i].intr_sel = in_le32(&chan->intr_sel); save[i].br_sel = in_le32(&chan->br_sel); save[i].wait_sel = in_le32(&chan->wait_sel); } } static void dbdma_restore(struct macio_chip *macio, struct dbdma_regs *save) { int i; /* Save state & config of DBDMA channels */ for (i = 0; i < 13; i++) { volatile struct dbdma_regs __iomem * chan = (void __iomem *) (macio->base + ((0x8000+i*0x100)>>2)); out_le32(&chan->control, (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16); while (in_le32(&chan->status) & ACTIVE) mb(); out_le32(&chan->cmdptr_hi, save[i].cmdptr_hi); out_le32(&chan->cmdptr, save[i].cmdptr); out_le32(&chan->intr_sel, save[i].intr_sel); out_le32(&chan->br_sel, save[i].br_sel); out_le32(&chan->wait_sel, save[i].wait_sel); } } static void heathrow_sleep(struct macio_chip *macio, int secondary) { if (secondary) { dbdma_save(macio, save_alt_dbdma); save_fcr[2] = MACIO_IN32(0x38); save_fcr[3] = MACIO_IN32(0x3c); } else { dbdma_save(macio, save_dbdma); save_fcr[0] = MACIO_IN32(0x38); save_fcr[1] = MACIO_IN32(0x3c); save_mbcr = MACIO_IN32(0x34); /* Make sure sound is shut down */ MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N); MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); /* This seems to be necessary as well or the fan * keeps coming up and battery drains fast */ MACIO_BIC(HEATHROW_FCR, HRW_IOBUS_ENABLE); MACIO_BIC(HEATHROW_FCR, HRW_IDE0_RESET_N); /* Make sure eth is down even if module or sleep * won't work properly */ MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE | HRW_BMAC_RESET); } /* Make sure modem is shut down */ MACIO_OUT8(HRW_GPIO_MODEM_RESET, MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1); MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); MACIO_BIC(HEATHROW_FCR, OH_SCCA_IO|OH_SCCB_IO|HRW_SCC_ENABLE); /* Let things settle */ (void)MACIO_IN32(HEATHROW_FCR); } static void heathrow_wakeup(struct macio_chip *macio, int secondary) { if (secondary) { MACIO_OUT32(0x38, save_fcr[2]); (void)MACIO_IN32(0x38); mdelay(1); MACIO_OUT32(0x3c, save_fcr[3]); (void)MACIO_IN32(0x38); mdelay(10); dbdma_restore(macio, save_alt_dbdma); } else { MACIO_OUT32(0x38, save_fcr[0] | HRW_IOBUS_ENABLE); (void)MACIO_IN32(0x38); mdelay(1); MACIO_OUT32(0x3c, save_fcr[1]); (void)MACIO_IN32(0x38); mdelay(1); MACIO_OUT32(0x34, save_mbcr); (void)MACIO_IN32(0x38); mdelay(10); dbdma_restore(macio, save_dbdma); } } static long heathrow_sleep_state(struct device_node *node, long param, long value) { if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) return -EPERM; if (value == 1) { if (macio_chips[1].type == macio_gatwick) heathrow_sleep(&macio_chips[0], 1); heathrow_sleep(&macio_chips[0], 0); } else if (value == 0) { heathrow_wakeup(&macio_chips[0], 0); if (macio_chips[1].type == macio_gatwick) heathrow_wakeup(&macio_chips[0], 1); } return 0; } static long core99_scc_enable(struct device_node *node, long param, long value) { struct macio_chip* macio; unsigned long flags; unsigned long chan_mask; u32 fcr; macio = macio_find(node, 0); if (!macio) return -ENODEV; if (of_node_name_eq(node, "ch-a")) chan_mask = MACIO_FLAG_SCCA_ON; else if (of_node_name_eq(node, "ch-b")) chan_mask = MACIO_FLAG_SCCB_ON; else return -ENODEV; if (value) { int need_reset_scc = 0; int need_reset_irda = 0; LOCK(flags); fcr = MACIO_IN32(KEYLARGO_FCR0); /* Check if scc cell need enabling */ if (!(fcr & KL0_SCC_CELL_ENABLE)) { fcr |= KL0_SCC_CELL_ENABLE; need_reset_scc = 1; } if (chan_mask & MACIO_FLAG_SCCA_ON) { fcr |= KL0_SCCA_ENABLE; /* Don't enable line drivers for I2S modem */ if ((param & 0xfff) == PMAC_SCC_I2S1) fcr &= ~KL0_SCC_A_INTF_ENABLE; else fcr |= KL0_SCC_A_INTF_ENABLE; } if (chan_mask & MACIO_FLAG_SCCB_ON) { fcr |= KL0_SCCB_ENABLE; /* Perform irda specific inits */ if ((param & 0xfff) == PMAC_SCC_IRDA) { fcr &= ~KL0_SCC_B_INTF_ENABLE; fcr |= KL0_IRDA_ENABLE; fcr |= KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE; fcr |= KL0_IRDA_SOURCE1_SEL; fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0); fcr &= ~(KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND); need_reset_irda = 1; } else fcr |= KL0_SCC_B_INTF_ENABLE; } MACIO_OUT32(KEYLARGO_FCR0, fcr); macio->flags |= chan_mask; if (need_reset_scc) { MACIO_BIS(KEYLARGO_FCR0, KL0_SCC_RESET); (void)MACIO_IN32(KEYLARGO_FCR0); UNLOCK(flags); mdelay(15); LOCK(flags); MACIO_BIC(KEYLARGO_FCR0, KL0_SCC_RESET); } if (need_reset_irda) { MACIO_BIS(KEYLARGO_FCR0, KL0_IRDA_RESET); (void)MACIO_IN32(KEYLARGO_FCR0); UNLOCK(flags); mdelay(15); LOCK(flags); MACIO_BIC(KEYLARGO_FCR0, KL0_IRDA_RESET); } UNLOCK(flags); if (param & PMAC_SCC_FLAG_XMON) macio->flags |= MACIO_FLAG_SCC_LOCKED; } else { if (macio->flags & MACIO_FLAG_SCC_LOCKED) return -EPERM; LOCK(flags); fcr = MACIO_IN32(KEYLARGO_FCR0); if (chan_mask & MACIO_FLAG_SCCA_ON) fcr &= ~KL0_SCCA_ENABLE; if (chan_mask & MACIO_FLAG_SCCB_ON) { fcr &= ~KL0_SCCB_ENABLE; /* Perform irda specific clears */ if ((param & 0xfff) == PMAC_SCC_IRDA) { fcr &= ~KL0_IRDA_ENABLE; fcr &= ~(KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE); fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0); fcr &= ~(KL0_IRDA_SOURCE1_SEL|KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND); } } MACIO_OUT32(KEYLARGO_FCR0, fcr); if ((fcr & (KL0_SCCA_ENABLE | KL0_SCCB_ENABLE)) == 0) { fcr &= ~KL0_SCC_CELL_ENABLE; MACIO_OUT32(KEYLARGO_FCR0, fcr); } macio->flags &= ~(chan_mask); UNLOCK(flags); mdelay(10); } return 0; } static long core99_modem_enable(struct device_node *node, long param, long value) { struct macio_chip* macio; u8 gpio; unsigned long flags; /* Hack for internal USB modem */ if (node == NULL) { if (macio_chips[0].type != macio_keylargo) return -ENODEV; node = macio_chips[0].of_node; } macio = macio_find(node, 0); if (!macio) return -ENODEV; gpio = MACIO_IN8(KL_GPIO_MODEM_RESET); gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE; gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA; if (!value) { LOCK(flags); MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); UNLOCK(flags); (void)MACIO_IN8(KL_GPIO_MODEM_RESET); mdelay(250); } LOCK(flags); if (value) { MACIO_BIC(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); UNLOCK(flags); (void)MACIO_IN32(KEYLARGO_FCR2); mdelay(250); } else { MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); UNLOCK(flags); } if (value) { LOCK(flags); MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); (void)MACIO_IN8(KL_GPIO_MODEM_RESET); UNLOCK(flags); mdelay(250); LOCK(flags); MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); (void)MACIO_IN8(KL_GPIO_MODEM_RESET); UNLOCK(flags); mdelay(250); LOCK(flags); MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); (void)MACIO_IN8(KL_GPIO_MODEM_RESET); UNLOCK(flags); mdelay(250); } return 0; } static long pangea_modem_enable(struct device_node *node, long param, long value) { struct macio_chip* macio; u8 gpio; unsigned long flags; /* Hack for internal USB modem */ if (node == NULL) { if (macio_chips[0].type != macio_pangea && macio_chips[0].type != macio_intrepid) return -ENODEV; node = macio_chips[0].of_node; } macio = macio_find(node, 0); if (!macio) return -ENODEV; gpio = MACIO_IN8(KL_GPIO_MODEM_RESET); gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE; gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA; if (!value) { LOCK(flags); MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); UNLOCK(flags); (void)MACIO_IN8(KL_GPIO_MODEM_RESET); mdelay(250); } LOCK(flags); if (value) { MACIO_OUT8(KL_GPIO_MODEM_POWER, KEYLARGO_GPIO_OUTPUT_ENABLE); UNLOCK(flags); (void)MACIO_IN32(KEYLARGO_FCR2); mdelay(250); } else { MACIO_OUT8(KL_GPIO_MODEM_POWER, KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA); UNLOCK(flags); } if (value) { LOCK(flags); MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); (void)MACIO_IN8(KL_GPIO_MODEM_RESET); UNLOCK(flags); mdelay(250); LOCK(flags); MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); (void)MACIO_IN8(KL_GPIO_MODEM_RESET); UNLOCK(flags); mdelay(250); LOCK(flags); MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); (void)MACIO_IN8(KL_GPIO_MODEM_RESET); UNLOCK(flags); mdelay(250); } return 0; } static long core99_ata100_enable(struct device_node *node, long value) { unsigned long flags; struct pci_dev *pdev = NULL; u8 pbus, pid; int rc; if (uninorth_rev < 0x24) return -ENODEV; LOCK(flags); if (value) UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100); else UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100); (void)UN_IN(UNI_N_CLOCK_CNTL); UNLOCK(flags); udelay(20); if (value) { if (pci_device_from_OF_node(node, &pbus, &pid) == 0) pdev = pci_get_domain_bus_and_slot(0, pbus, pid); if (pdev == NULL) return 0; rc = pci_enable_device(pdev); if (rc == 0) pci_set_master(pdev); pci_dev_put(pdev); if (rc) return rc; } return 0; } static long core99_ide_enable(struct device_node *node, long param, long value) { /* Bus ID 0 to 2 are KeyLargo based IDE, busID 3 is U2 * based ata-100 */ switch(param) { case 0: return simple_feature_tweak(node, macio_unknown, KEYLARGO_FCR1, KL1_EIDE0_ENABLE, value); case 1: return simple_feature_tweak(node, macio_unknown, KEYLARGO_FCR1, KL1_EIDE1_ENABLE, value); case 2: return simple_feature_tweak(node, macio_unknown, KEYLARGO_FCR1, KL1_UIDE_ENABLE, value); case 3: return core99_ata100_enable(node, value); default: return -ENODEV; } } static long core99_ide_reset(struct device_node *node, long param, long value) { switch(param) { case 0: return simple_feature_tweak(node, macio_unknown, KEYLARGO_FCR1, KL1_EIDE0_RESET_N, !value); case 1: return simple_feature_tweak(node, macio_unknown, KEYLARGO_FCR1, KL1_EIDE1_RESET_N, !value); case 2: return simple_feature_tweak(node, macio_unknown, KEYLARGO_FCR1, KL1_UIDE_RESET_N, !value); default: return -ENODEV; } } static long core99_gmac_enable(struct device_node *node, long param, long value) { unsigned long flags; LOCK(flags); if (value) UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC); else UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC); (void)UN_IN(UNI_N_CLOCK_CNTL); UNLOCK(flags); udelay(20); return 0; } static long core99_gmac_phy_reset(struct device_node *node, long param, long value) { unsigned long flags; struct macio_chip *macio; macio = &macio_chips[0]; if (macio->type != macio_keylargo && macio->type != macio_pangea && macio->type != macio_intrepid) return -ENODEV; LOCK(flags); MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE); (void)MACIO_IN8(KL_GPIO_ETH_PHY_RESET); UNLOCK(flags); mdelay(10); LOCK(flags); MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, /*KEYLARGO_GPIO_OUTPUT_ENABLE | */ KEYLARGO_GPIO_OUTOUT_DATA); UNLOCK(flags); mdelay(10); return 0; } static long core99_sound_chip_enable(struct device_node *node, long param, long value) { struct macio_chip* macio; unsigned long flags; macio = macio_find(node, 0); if (!macio) return -ENODEV; /* Do a better probe code, screamer G4 desktops & * iMacs can do that too, add a recalibrate in * the driver as well */ if (pmac_mb.model_id == PMAC_TYPE_PISMO || pmac_mb.model_id == PMAC_TYPE_TITANIUM) { LOCK(flags); if (value) MACIO_OUT8(KL_GPIO_SOUND_POWER, KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA); else MACIO_OUT8(KL_GPIO_SOUND_POWER, KEYLARGO_GPIO_OUTPUT_ENABLE); (void)MACIO_IN8(KL_GPIO_SOUND_POWER); UNLOCK(flags); } return 0; } static long core99_airport_enable(struct device_node *node, long param, long value) { struct macio_chip* macio; unsigned long flags; int state; macio = macio_find(node, 0); if (!macio) return -ENODEV; /* Hint: we allow passing of macio itself for the sake of the * sleep code */ if (node != macio->of_node && (!node->parent || node->parent != macio->of_node)) return -ENODEV; state = (macio->flags & MACIO_FLAG_AIRPORT_ON) != 0; if (value == state) return 0; if (value) { /* This code is a reproduction of OF enable-cardslot * and init-wireless methods, slightly hacked until * I got it working. */ LOCK(flags); MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 5); (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf); UNLOCK(flags); mdelay(10); LOCK(flags); MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 4); (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf); UNLOCK(flags); mdelay(10); LOCK(flags); MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16); (void)MACIO_IN32(KEYLARGO_FCR2); udelay(10); MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xb, 0); (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xb); udelay(10); MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xa, 0x28); (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xa); udelay(10); MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xd, 0x28); (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xd); udelay(10); MACIO_OUT8(KEYLARGO_GPIO_0+0xd, 0x28); (void)MACIO_IN8(KEYLARGO_GPIO_0+0xd); udelay(10); MACIO_OUT8(KEYLARGO_GPIO_0+0xe, 0x28); (void)MACIO_IN8(KEYLARGO_GPIO_0+0xe); UNLOCK(flags); udelay(10); MACIO_OUT32(0x1c000, 0); mdelay(1); MACIO_OUT8(0x1a3e0, 0x41); (void)MACIO_IN8(0x1a3e0); udelay(10); LOCK(flags); MACIO_BIS(KEYLARGO_FCR2, KL2_CARDSEL_16); (void)MACIO_IN32(KEYLARGO_FCR2); UNLOCK(flags); mdelay(100); macio->flags |= MACIO_FLAG_AIRPORT_ON; } else { LOCK(flags); MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16); (void)MACIO_IN32(KEYLARGO_FCR2); MACIO_OUT8(KL_GPIO_AIRPORT_0, 0); MACIO_OUT8(KL_GPIO_AIRPORT_1, 0); MACIO_OUT8(KL_GPIO_AIRPORT_2, 0); MACIO_OUT8(KL_GPIO_AIRPORT_3, 0); MACIO_OUT8(KL_GPIO_AIRPORT_4, 0); (void)MACIO_IN8(KL_GPIO_AIRPORT_4); UNLOCK(flags); macio->flags &= ~MACIO_FLAG_AIRPORT_ON; } return 0; } #ifdef CONFIG_SMP static long core99_reset_cpu(struct device_node *node, long param, long value) { unsigned int reset_io = 0; unsigned long flags; struct macio_chip *macio; struct device_node *np; const int dflt_reset_lines[] = { KL_GPIO_RESET_CPU0, KL_GPIO_RESET_CPU1, KL_GPIO_RESET_CPU2, KL_GPIO_RESET_CPU3 }; macio = &macio_chips[0]; if (macio->type != macio_keylargo) return -ENODEV; for_each_of_cpu_node(np) { const u32 *num = of_get_property(np, "reg", NULL); const u32 *rst = of_get_property(np, "soft-reset", NULL); if (num == NULL || rst == NULL) continue; if (param == *num) { reset_io = *rst; break; } } if (np == NULL || reset_io == 0) reset_io = dflt_reset_lines[param]; LOCK(flags); MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE); (void)MACIO_IN8(reset_io); udelay(1); MACIO_OUT8(reset_io, 0); (void)MACIO_IN8(reset_io); UNLOCK(flags); return 0; } #endif /* CONFIG_SMP */ static long core99_usb_enable(struct device_node *node, long param, long value) { struct macio_chip *macio; unsigned long flags; const char *prop; int number; u32 reg; macio = &macio_chips[0]; if (macio->type != macio_keylargo && macio->type != macio_pangea && macio->type != macio_intrepid) return -ENODEV; prop = of_get_property(node, "AAPL,clock-id", NULL); if (!prop) return -ENODEV; if (strncmp(prop, "usb0u048", 8) == 0) number = 0; else if (strncmp(prop, "usb1u148", 8) == 0) number = 2; else if (strncmp(prop, "usb2u248", 8) == 0) number = 4; else return -ENODEV; /* Sorry for the brute-force locking, but this is only used during * sleep and the timing seem to be critical */ LOCK(flags); if (value) { /* Turn ON */ if (number == 0) { MACIO_BIC(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1)); (void)MACIO_IN32(KEYLARGO_FCR0); UNLOCK(flags); mdelay(1); LOCK(flags); MACIO_BIS(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE); } else if (number == 2) { MACIO_BIC(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1)); UNLOCK(flags); (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1); LOCK(flags); MACIO_BIS(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE); } else if (number == 4) { MACIO_BIC(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1)); UNLOCK(flags); (void)MACIO_IN32(KEYLARGO_FCR1); mdelay(1); LOCK(flags); MACIO_BIS(KEYLARGO_FCR1, KL1_USB2_CELL_ENABLE); } if (number < 4) { reg = MACIO_IN32(KEYLARGO_FCR4); reg &= ~(KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) | KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number)); reg &= ~(KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) | KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1)); MACIO_OUT32(KEYLARGO_FCR4, reg); (void)MACIO_IN32(KEYLARGO_FCR4); udelay(10); } else { reg = MACIO_IN32(KEYLARGO_FCR3); reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) | KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0)); reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) | KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1)); MACIO_OUT32(KEYLARGO_FCR3, reg); (void)MACIO_IN32(KEYLARGO_FCR3); udelay(10); } if (macio->type == macio_intrepid) { /* wait for clock stopped bits to clear */ u32 test0 = 0, test1 = 0; u32 status0, status1; int timeout = 1000; UNLOCK(flags); switch (number) { case 0: test0 = UNI_N_CLOCK_STOPPED_USB0; test1 = UNI_N_CLOCK_STOPPED_USB0PCI; break; case 2: test0 = UNI_N_CLOCK_STOPPED_USB1; test1 = UNI_N_CLOCK_STOPPED_USB1PCI; break; case 4: test0 = UNI_N_CLOCK_STOPPED_USB2; test1 = UNI_N_CLOCK_STOPPED_USB2PCI; break; } do { if (--timeout <= 0) { printk(KERN_ERR "core99_usb_enable: " "Timeout waiting for clocks\n"); break; } mdelay(1); status0 = UN_IN(UNI_N_CLOCK_STOP_STATUS0); status1 = UN_IN(UNI_N_CLOCK_STOP_STATUS1); } while ((status0 & test0) | (status1 & test1)); LOCK(flags); } } else { /* Turn OFF */ if (number < 4) { reg = MACIO_IN32(KEYLARGO_FCR4); reg |= KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) | KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number); reg |= KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) | KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1); MACIO_OUT32(KEYLARGO_FCR4, reg); (void)MACIO_IN32(KEYLARGO_FCR4); udelay(1); } else { reg = MACIO_IN32(KEYLARGO_FCR3); reg |= KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) | KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0); reg |= KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) | KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1); MACIO_OUT32(KEYLARGO_FCR3, reg); (void)MACIO_IN32(KEYLARGO_FCR3); udelay(1); } if (number == 0) { if (macio->type != macio_intrepid) MACIO_BIC(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE); (void)MACIO_IN32(KEYLARGO_FCR0); udelay(1); MACIO_BIS(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1)); (void)MACIO_IN32(KEYLARGO_FCR0); } else if (number == 2) { if (macio->type != macio_intrepid) MACIO_BIC(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE); (void)MACIO_IN32(KEYLARGO_FCR0); udelay(1); MACIO_BIS(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1)); (void)MACIO_IN32(KEYLARGO_FCR0); } else if (number == 4) { udelay(1); MACIO_BIS(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1)); (void)MACIO_IN32(KEYLARGO_FCR1); } udelay(1); } UNLOCK(flags); return 0; } static long core99_firewire_enable(struct device_node *node, long param, long value) { unsigned long flags; struct macio_chip *macio; macio = &macio_chips[0]; if (macio->type != macio_keylargo && macio->type != macio_pangea && macio->type != macio_intrepid) return -ENODEV; if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED)) return -ENODEV; LOCK(flags); if (value) { UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW); (void)UN_IN(UNI_N_CLOCK_CNTL); } else { UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW); (void)UN_IN(UNI_N_CLOCK_CNTL); } UNLOCK(flags); mdelay(1); return 0; } static long core99_firewire_cable_power(struct device_node *node, long param, long value) { unsigned long flags; struct macio_chip *macio; /* Trick: we allow NULL node */ if ((pmac_mb.board_flags & PMAC_MB_HAS_FW_POWER) == 0) return -ENODEV; macio = &macio_chips[0]; if (macio->type != macio_keylargo && macio->type != macio_pangea && macio->type != macio_intrepid) return -ENODEV; if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED)) return -ENODEV; LOCK(flags); if (value) { MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 0); MACIO_IN8(KL_GPIO_FW_CABLE_POWER); udelay(10); } else { MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 4); MACIO_IN8(KL_GPIO_FW_CABLE_POWER); udelay(10); } UNLOCK(flags); mdelay(1); return 0; } static long intrepid_aack_delay_enable(struct device_node *node, long param, long value) { unsigned long flags; if (uninorth_rev < 0xd2) return -ENODEV; LOCK(flags); if (param) UN_BIS(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE); else UN_BIC(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE); UNLOCK(flags); return 0; } #endif /* CONFIG_PPC64 */ static long core99_read_gpio(struct device_node *node, long param, long value) { struct macio_chip *macio = &macio_chips[0]; return MACIO_IN8(param); } static long core99_write_gpio(struct device_node *node, long param, long value) { struct macio_chip *macio = &macio_chips[0]; MACIO_OUT8(param, (u8)(value & 0xff)); return 0; } #ifdef CONFIG_PPC64 static long g5_gmac_enable(struct device_node *node, long param, long value) { struct macio_chip *macio = &macio_chips[0]; unsigned long flags; if (node == NULL) return -ENODEV; LOCK(flags); if (value) { MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE); mb(); k2_skiplist[0] = NULL; } else { k2_skiplist[0] = node; mb(); MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE); } UNLOCK(flags); mdelay(1); return 0; } static long g5_fw_enable(struct device_node *node, long param, long value) { struct macio_chip *macio = &macio_chips[0]; unsigned long flags; if (node == NULL) return -ENODEV; LOCK(flags); if (value) { MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE); mb(); k2_skiplist[1] = NULL; } else { k2_skiplist[1] = node; mb(); MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE); } UNLOCK(flags); mdelay(1); return 0; } static long g5_mpic_enable(struct device_node *node, long param, long value) { unsigned long flags; struct device_node *parent = of_get_parent(node); int is_u3; if (parent == NULL) return 0; is_u3 = of_node_name_eq(parent, "u3") || of_node_name_eq(parent, "u4"); of_node_put(parent); if (!is_u3) return 0; LOCK(flags); UN_BIS(U3_TOGGLE_REG, U3_MPIC_RESET | U3_MPIC_OUTPUT_ENABLE); UNLOCK(flags); return 0; } static long g5_eth_phy_reset(struct device_node *node, long param, long value) { struct macio_chip *macio = &macio_chips[0]; struct device_node *phy; int need_reset; /* * We must not reset the combo PHYs, only the BCM5221 found in * the iMac G5. */ phy = of_get_next_child(node, NULL); if (!phy) return -ENODEV; need_reset = of_device_is_compatible(phy, "B5221"); of_node_put(phy); if (!need_reset) return 0; /* PHY reset is GPIO 29, not in device-tree unfortunately */ MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA); /* Thankfully, this is now always called at a time when we can * schedule by sungem. */ msleep(10); MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, 0); return 0; } static long g5_i2s_enable(struct device_node *node, long param, long value) { /* Very crude implementation for now */ struct macio_chip *macio = &macio_chips[0]; unsigned long flags; int cell; u32 fcrs[3][3] = { { 0, K2_FCR1_I2S0_CELL_ENABLE | K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE, KL3_I2S0_CLK18_ENABLE }, { KL0_SCC_A_INTF_ENABLE, K2_FCR1_I2S1_CELL_ENABLE | K2_FCR1_I2S1_CLK_ENABLE_BIT | K2_FCR1_I2S1_ENABLE, KL3_I2S1_CLK18_ENABLE }, { KL0_SCC_B_INTF_ENABLE, SH_FCR1_I2S2_CELL_ENABLE | SH_FCR1_I2S2_CLK_ENABLE_BIT | SH_FCR1_I2S2_ENABLE, SH_FCR3_I2S2_CLK18_ENABLE }, }; if (macio->type != macio_keylargo2 && macio->type != macio_shasta) return -ENODEV; if (strncmp(node->name, "i2s-", 4)) return -ENODEV; cell = node->name[4] - 'a'; switch(cell) { case 0: case 1: break; case 2: if (macio->type == macio_shasta) break; fallthrough; default: return -ENODEV; } LOCK(flags); if (value) { MACIO_BIC(KEYLARGO_FCR0, fcrs[cell][0]); MACIO_BIS(KEYLARGO_FCR1, fcrs[cell][1]); MACIO_BIS(KEYLARGO_FCR3, fcrs[cell][2]); } else { MACIO_BIC(KEYLARGO_FCR3, fcrs[cell][2]); MACIO_BIC(KEYLARGO_FCR1, fcrs[cell][1]); MACIO_BIS(KEYLARGO_FCR0, fcrs[cell][0]); } udelay(10); UNLOCK(flags); return 0; } #ifdef CONFIG_SMP static long g5_reset_cpu(struct device_node *node, long param, long value) { unsigned int reset_io = 0; unsigned long flags; struct macio_chip *macio; struct device_node *np; macio = &macio_chips[0]; if (macio->type != macio_keylargo2 && macio->type != macio_shasta) return -ENODEV; for_each_of_cpu_node(np) { const u32 *num = of_get_property(np, "reg", NULL); const u32 *rst = of_get_property(np, "soft-reset", NULL); if (num == NULL || rst == NULL) continue; if (param == *num) { reset_io = *rst; break; } } if (np == NULL || reset_io == 0) return -ENODEV; LOCK(flags); MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE); (void)MACIO_IN8(reset_io); udelay(1); MACIO_OUT8(reset_io, 0); (void)MACIO_IN8(reset_io); UNLOCK(flags); return 0; } #endif /* CONFIG_SMP */ /* * This can be called from pmac_smp so isn't static * * This takes the second CPU off the bus on dual CPU machines * running UP */ void g5_phy_disable_cpu1(void) { if (uninorth_maj == 3) UN_OUT(U3_API_PHY_CONFIG_1, 0); } #endif /* CONFIG_PPC64 */ #ifndef CONFIG_PPC64 #ifdef CONFIG_PM static u32 save_gpio_levels[2]; static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT]; static u8 save_gpio_normal[KEYLARGO_GPIO_CNT]; static u32 save_unin_clock_ctl; static void keylargo_shutdown(struct macio_chip *macio, int sleep_mode) { u32 temp; if (sleep_mode) { mdelay(1); MACIO_BIS(KEYLARGO_FCR0, KL0_USB_REF_SUSPEND); (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1); } MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | KL0_SCC_CELL_ENABLE | KL0_IRDA_ENABLE | KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE); MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK); MACIO_BIS(KEYLARGO_MBCR, KL_MBCR_MB0_IDE_ENABLE); MACIO_BIC(KEYLARGO_FCR1, KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT | KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE | KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE | KL1_EIDE0_ENABLE | KL1_EIDE0_RESET_N | KL1_EIDE1_ENABLE | KL1_EIDE1_RESET_N | KL1_UIDE_ENABLE); MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); MACIO_BIC(KEYLARGO_FCR2, KL2_IOBUS_ENABLE); temp = MACIO_IN32(KEYLARGO_FCR3); if (macio->rev >= 2) { temp |= KL3_SHUTDOWN_PLL2X; if (sleep_mode) temp |= KL3_SHUTDOWN_PLL_TOTAL; } temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 | KL3_SHUTDOWN_PLLKW35; if (sleep_mode) temp |= KL3_SHUTDOWN_PLLKW12; temp &= ~(KL3_CLK66_ENABLE | KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | KL3_CLK31_ENABLE | KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE); if (sleep_mode) temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE); MACIO_OUT32(KEYLARGO_FCR3, temp); /* Flush posted writes & wait a bit */ (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1); } static void pangea_shutdown(struct macio_chip *macio, int sleep_mode) { u32 temp; MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | KL0_SCC_CELL_ENABLE | KL0_USB0_CELL_ENABLE | KL0_USB1_CELL_ENABLE); MACIO_BIC(KEYLARGO_FCR1, KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT | KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE | KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE | KL1_UIDE_ENABLE); if (pmac_mb.board_flags & PMAC_MB_MOBILE) MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N); MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); temp = MACIO_IN32(KEYLARGO_FCR3); temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 | KL3_SHUTDOWN_PLLKW35; temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | KL3_CLK31_ENABLE | KL3_I2S0_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE); if (sleep_mode) temp &= ~(KL3_VIA_CLK16_ENABLE | KL3_TIMER_CLK18_ENABLE); MACIO_OUT32(KEYLARGO_FCR3, temp); /* Flush posted writes & wait a bit */ (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1); } static void intrepid_shutdown(struct macio_chip *macio, int sleep_mode) { u32 temp; MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | KL0_SCC_CELL_ENABLE); MACIO_BIC(KEYLARGO_FCR1, KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE | KL1_EIDE0_ENABLE); if (pmac_mb.board_flags & PMAC_MB_MOBILE) MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N); temp = MACIO_IN32(KEYLARGO_FCR3); temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE); if (sleep_mode) temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_IT_VIA_CLK32_ENABLE); MACIO_OUT32(KEYLARGO_FCR3, temp); /* Flush posted writes & wait a bit */ (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(10); } static int core99_sleep(void) { struct macio_chip *macio; int i; macio = &macio_chips[0]; if (macio->type != macio_keylargo && macio->type != macio_pangea && macio->type != macio_intrepid) return -ENODEV; /* We power off the wireless slot in case it was not done * by the driver. We don't power it on automatically however */ if (macio->flags & MACIO_FLAG_AIRPORT_ON) core99_airport_enable(macio->of_node, 0, 0); /* We power off the FW cable. Should be done by the driver... */ if (macio->flags & MACIO_FLAG_FW_SUPPORTED) { core99_firewire_enable(NULL, 0, 0); core99_firewire_cable_power(NULL, 0, 0); } /* We make sure int. modem is off (in case driver lost it) */ if (macio->type == macio_keylargo) core99_modem_enable(macio->of_node, 0, 0); else pangea_modem_enable(macio->of_node, 0, 0); /* We make sure the sound is off as well */ core99_sound_chip_enable(macio->of_node, 0, 0); /* * Save various bits of KeyLargo */ /* Save the state of the various GPIOs */ save_gpio_levels[0] = MACIO_IN32(KEYLARGO_GPIO_LEVELS0); save_gpio_levels[1] = MACIO_IN32(KEYLARGO_GPIO_LEVELS1); for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++) save_gpio_extint[i] = MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+i); for (i=0; i<KEYLARGO_GPIO_CNT; i++) save_gpio_normal[i] = MACIO_IN8(KEYLARGO_GPIO_0+i); /* Save the FCRs */ if (macio->type == macio_keylargo) save_mbcr = MACIO_IN32(KEYLARGO_MBCR); save_fcr[0] = MACIO_IN32(KEYLARGO_FCR0); save_fcr[1] = MACIO_IN32(KEYLARGO_FCR1); save_fcr[2] = MACIO_IN32(KEYLARGO_FCR2); save_fcr[3] = MACIO_IN32(KEYLARGO_FCR3); save_fcr[4] = MACIO_IN32(KEYLARGO_FCR4); if (macio->type == macio_pangea || macio->type == macio_intrepid) save_fcr[5] = MACIO_IN32(KEYLARGO_FCR5); /* Save state & config of DBDMA channels */ dbdma_save(macio, save_dbdma); /* * Turn off as much as we can */ if (macio->type == macio_pangea) pangea_shutdown(macio, 1); else if (macio->type == macio_intrepid) intrepid_shutdown(macio, 1); else if (macio->type == macio_keylargo) keylargo_shutdown(macio, 1); /* * Put the host bridge to sleep */ save_unin_clock_ctl = UN_IN(UNI_N_CLOCK_CNTL); /* Note: do not switch GMAC off, driver does it when necessary, WOL must keep it * enabled ! */ UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl & ~(/*UNI_N_CLOCK_CNTL_GMAC|*/UNI_N_CLOCK_CNTL_FW/*|UNI_N_CLOCK_CNTL_PCI*/)); udelay(100); UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING); UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_SLEEP); mdelay(10); /* * FIXME: A bit of black magic with OpenPIC (don't ask me why) */ if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) { MACIO_BIS(0x506e0, 0x00400000); MACIO_BIS(0x506e0, 0x80000000); } return 0; } static int core99_wake_up(void) { struct macio_chip *macio; int i; macio = &macio_chips[0]; if (macio->type != macio_keylargo && macio->type != macio_pangea && macio->type != macio_intrepid) return -ENODEV; /* * Wakeup the host bridge */ UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL); udelay(10); UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING); udelay(10); /* * Restore KeyLargo */ if (macio->type == macio_keylargo) { MACIO_OUT32(KEYLARGO_MBCR, save_mbcr); (void)MACIO_IN32(KEYLARGO_MBCR); udelay(10); } MACIO_OUT32(KEYLARGO_FCR0, save_fcr[0]); (void)MACIO_IN32(KEYLARGO_FCR0); udelay(10); MACIO_OUT32(KEYLARGO_FCR1, save_fcr[1]); (void)MACIO_IN32(KEYLARGO_FCR1); udelay(10); MACIO_OUT32(KEYLARGO_FCR2, save_fcr[2]); (void)MACIO_IN32(KEYLARGO_FCR2); udelay(10); MACIO_OUT32(KEYLARGO_FCR3, save_fcr[3]); (void)MACIO_IN32(KEYLARGO_FCR3); udelay(10); MACIO_OUT32(KEYLARGO_FCR4, save_fcr[4]); (void)MACIO_IN32(KEYLARGO_FCR4); udelay(10); if (macio->type == macio_pangea || macio->type == macio_intrepid) { MACIO_OUT32(KEYLARGO_FCR5, save_fcr[5]); (void)MACIO_IN32(KEYLARGO_FCR5); udelay(10); } dbdma_restore(macio, save_dbdma); MACIO_OUT32(KEYLARGO_GPIO_LEVELS0, save_gpio_levels[0]); MACIO_OUT32(KEYLARGO_GPIO_LEVELS1, save_gpio_levels[1]); for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++) MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+i, save_gpio_extint[i]); for (i=0; i<KEYLARGO_GPIO_CNT; i++) MACIO_OUT8(KEYLARGO_GPIO_0+i, save_gpio_normal[i]); /* FIXME more black magic with OpenPIC ... */ if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) { MACIO_BIC(0x506e0, 0x00400000); MACIO_BIC(0x506e0, 0x80000000); } UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl); udelay(100); return 0; } #endif /* CONFIG_PM */ static long core99_sleep_state(struct device_node *node, long param, long value) { /* Param == 1 means to enter the "fake sleep" mode that is * used for CPU speed switch */ if (param == 1) { if (value == 1) { UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING); UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_IDLE2); } else { UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL); udelay(10); UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING); udelay(10); } return 0; } if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) return -EPERM; #ifdef CONFIG_PM if (value == 1) return core99_sleep(); else if (value == 0) return core99_wake_up(); #endif /* CONFIG_PM */ return 0; } #endif /* CONFIG_PPC64 */ static long generic_dev_can_wake(struct device_node *node, long param, long value) { /* Todo: eventually check we are really dealing with on-board * video device ... */ if (pmac_mb.board_flags & PMAC_MB_MAY_SLEEP) pmac_mb.board_flags |= PMAC_MB_CAN_SLEEP; return 0; } static long generic_get_mb_info(struct device_node *node, long param, long value) { switch(param) { case PMAC_MB_INFO_MODEL: return pmac_mb.model_id; case PMAC_MB_INFO_FLAGS: return pmac_mb.board_flags; case PMAC_MB_INFO_NAME: /* hack hack hack... but should work */ *((const char **)value) = pmac_mb.model_name; return 0; } return -EINVAL; } /* * Table definitions */ /* Used on any machine */ static struct feature_table_entry any_features[] = { { PMAC_FTR_GET_MB_INFO, generic_get_mb_info }, { PMAC_FTR_DEVICE_CAN_WAKE, generic_dev_can_wake }, { 0, NULL } }; #ifndef CONFIG_PPC64 /* OHare based motherboards. Currently, we only use these on the * 2400,3400 and 3500 series powerbooks. Some older desktops seem * to have issues with turning on/off those asic cells */ static struct feature_table_entry ohare_features[] = { { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable }, { PMAC_FTR_SWIM3_ENABLE, ohare_floppy_enable }, { PMAC_FTR_MESH_ENABLE, ohare_mesh_enable }, { PMAC_FTR_IDE_ENABLE, ohare_ide_enable}, { PMAC_FTR_IDE_RESET, ohare_ide_reset}, { PMAC_FTR_SLEEP_STATE, ohare_sleep_state }, { 0, NULL } }; /* Heathrow desktop machines (Beige G3). * Separated as some features couldn't be properly tested * and the serial port control bits appear to confuse it. */ static struct feature_table_entry heathrow_desktop_features[] = { { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable }, { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable }, { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable }, { PMAC_FTR_IDE_RESET, heathrow_ide_reset }, { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable }, { 0, NULL } }; /* Heathrow based laptop, that is the Wallstreet and mainstreet * powerbooks. */ static struct feature_table_entry heathrow_laptop_features[] = { { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable }, { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable }, { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable }, { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable }, { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable }, { PMAC_FTR_IDE_RESET, heathrow_ide_reset }, { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable }, { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable }, { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state }, { 0, NULL } }; /* Paddington based machines * The lombard (101) powerbook, first iMac models, B&W G3 and Yikes G4. */ static struct feature_table_entry paddington_features[] = { { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable }, { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable }, { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable }, { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable }, { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable }, { PMAC_FTR_IDE_RESET, heathrow_ide_reset }, { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable }, { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable }, { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state }, { 0, NULL } }; /* Core99 & MacRISC 2 machines (all machines released since the * iBook (included), that is all AGP machines, except pangea * chipset. The pangea chipset is the "combo" UniNorth/KeyLargo * used on iBook2 & iMac "flow power". */ static struct feature_table_entry core99_features[] = { { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, { PMAC_FTR_MODEM_ENABLE, core99_modem_enable }, { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, { PMAC_FTR_IDE_RESET, core99_ide_reset }, { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable }, { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable }, { PMAC_FTR_USB_ENABLE, core99_usb_enable }, { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, #ifdef CONFIG_PM { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, #endif #ifdef CONFIG_SMP { PMAC_FTR_RESET_CPU, core99_reset_cpu }, #endif /* CONFIG_SMP */ { PMAC_FTR_READ_GPIO, core99_read_gpio }, { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, { 0, NULL } }; /* RackMac */ static struct feature_table_entry rackmac_features[] = { { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, { PMAC_FTR_IDE_RESET, core99_ide_reset }, { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, { PMAC_FTR_USB_ENABLE, core99_usb_enable }, { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, #ifdef CONFIG_SMP { PMAC_FTR_RESET_CPU, core99_reset_cpu }, #endif /* CONFIG_SMP */ { PMAC_FTR_READ_GPIO, core99_read_gpio }, { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, { 0, NULL } }; /* Pangea features */ static struct feature_table_entry pangea_features[] = { { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, { PMAC_FTR_MODEM_ENABLE, pangea_modem_enable }, { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, { PMAC_FTR_IDE_RESET, core99_ide_reset }, { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable }, { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable }, { PMAC_FTR_USB_ENABLE, core99_usb_enable }, { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, { PMAC_FTR_READ_GPIO, core99_read_gpio }, { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, { 0, NULL } }; /* Intrepid features */ static struct feature_table_entry intrepid_features[] = { { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, { PMAC_FTR_MODEM_ENABLE, pangea_modem_enable }, { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, { PMAC_FTR_IDE_RESET, core99_ide_reset }, { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable }, { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable }, { PMAC_FTR_USB_ENABLE, core99_usb_enable }, { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, { PMAC_FTR_READ_GPIO, core99_read_gpio }, { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, { PMAC_FTR_AACK_DELAY_ENABLE, intrepid_aack_delay_enable }, { 0, NULL } }; #else /* CONFIG_PPC64 */ /* G5 features */ static struct feature_table_entry g5_features[] = { { PMAC_FTR_GMAC_ENABLE, g5_gmac_enable }, { PMAC_FTR_1394_ENABLE, g5_fw_enable }, { PMAC_FTR_ENABLE_MPIC, g5_mpic_enable }, { PMAC_FTR_GMAC_PHY_RESET, g5_eth_phy_reset }, { PMAC_FTR_SOUND_CHIP_ENABLE, g5_i2s_enable }, #ifdef CONFIG_SMP { PMAC_FTR_RESET_CPU, g5_reset_cpu }, #endif /* CONFIG_SMP */ { PMAC_FTR_READ_GPIO, core99_read_gpio }, { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, { 0, NULL } }; #endif /* CONFIG_PPC64 */ static struct pmac_mb_def pmac_mb_defs[] = { #ifndef CONFIG_PPC64 /* * Desktops */ { "AAPL,8500", "PowerMac 8500/8600", PMAC_TYPE_PSURGE, NULL, 0 }, { "AAPL,9500", "PowerMac 9500/9600", PMAC_TYPE_PSURGE, NULL, 0 }, { "AAPL,7200", "PowerMac 7200", PMAC_TYPE_PSURGE, NULL, 0 }, { "AAPL,7300", "PowerMac 7200/7300", PMAC_TYPE_PSURGE, NULL, 0 }, { "AAPL,7500", "PowerMac 7500", PMAC_TYPE_PSURGE, NULL, 0 }, { "AAPL,ShinerESB", "Apple Network Server", PMAC_TYPE_ANS, NULL, 0 }, { "AAPL,e407", "Alchemy", PMAC_TYPE_ALCHEMY, NULL, 0 }, { "AAPL,e411", "Gazelle", PMAC_TYPE_GAZELLE, NULL, 0 }, { "AAPL,Gossamer", "PowerMac G3 (Gossamer)", PMAC_TYPE_GOSSAMER, heathrow_desktop_features, 0 }, { "AAPL,PowerMac G3", "PowerMac G3 (Silk)", PMAC_TYPE_SILK, heathrow_desktop_features, 0 }, { "PowerMac1,1", "Blue&White G3", PMAC_TYPE_YOSEMITE, paddington_features, 0 }, { "PowerMac1,2", "PowerMac G4 PCI Graphics", PMAC_TYPE_YIKES, paddington_features, 0 }, { "PowerMac2,1", "iMac FireWire", PMAC_TYPE_FW_IMAC, core99_features, PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 }, { "PowerMac2,2", "iMac FireWire", PMAC_TYPE_FW_IMAC, core99_features, PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 }, { "PowerMac3,1", "PowerMac G4 AGP Graphics", PMAC_TYPE_SAWTOOTH, core99_features, PMAC_MB_OLD_CORE99 }, { "PowerMac3,2", "PowerMac G4 AGP Graphics", PMAC_TYPE_SAWTOOTH, core99_features, PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 }, { "PowerMac3,3", "PowerMac G4 AGP Graphics", PMAC_TYPE_SAWTOOTH, core99_features, PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 }, { "PowerMac3,4", "PowerMac G4 Silver", PMAC_TYPE_QUICKSILVER, core99_features, PMAC_MB_MAY_SLEEP }, { "PowerMac3,5", "PowerMac G4 Silver", PMAC_TYPE_QUICKSILVER, core99_features, PMAC_MB_MAY_SLEEP }, { "PowerMac3,6", "PowerMac G4 Windtunnel", PMAC_TYPE_WINDTUNNEL, core99_features, PMAC_MB_MAY_SLEEP, }, { "PowerMac4,1", "iMac \"Flower Power\"", PMAC_TYPE_PANGEA_IMAC, pangea_features, PMAC_MB_MAY_SLEEP }, { "PowerMac4,2", "Flat panel iMac", PMAC_TYPE_FLAT_PANEL_IMAC, pangea_features, PMAC_MB_CAN_SLEEP }, { "PowerMac4,4", "eMac", PMAC_TYPE_EMAC, core99_features, PMAC_MB_MAY_SLEEP }, { "PowerMac5,1", "PowerMac G4 Cube", PMAC_TYPE_CUBE, core99_features, PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 }, { "PowerMac6,1", "Flat panel iMac", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP, }, { "PowerMac6,3", "Flat panel iMac", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP, }, { "PowerMac6,4", "eMac", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP, }, { "PowerMac10,1", "Mac mini", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP, }, { "PowerMac10,2", "Mac mini (Late 2005)", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP, }, { "iMac,1", "iMac (first generation)", PMAC_TYPE_ORIG_IMAC, paddington_features, 0 }, /* * Xserve's */ { "RackMac1,1", "XServe", PMAC_TYPE_RACKMAC, rackmac_features, 0, }, { "RackMac1,2", "XServe rev. 2", PMAC_TYPE_RACKMAC, rackmac_features, 0, }, /* * Laptops */ { "AAPL,3400/2400", "PowerBook 3400", PMAC_TYPE_HOOPER, ohare_features, PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE }, { "AAPL,3500", "PowerBook 3500", PMAC_TYPE_KANGA, ohare_features, PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE }, { "AAPL,PowerBook1998", "PowerBook Wallstreet", PMAC_TYPE_WALLSTREET, heathrow_laptop_features, PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE }, { "PowerBook1,1", "PowerBook 101 (Lombard)", PMAC_TYPE_101_PBOOK, paddington_features, PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE }, { "PowerBook2,1", "iBook (first generation)", PMAC_TYPE_ORIG_IBOOK, core99_features, PMAC_MB_CAN_SLEEP | PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE }, { "PowerBook2,2", "iBook FireWire", PMAC_TYPE_FW_IBOOK, core99_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE }, { "PowerBook3,1", "PowerBook Pismo", PMAC_TYPE_PISMO, core99_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE }, { "PowerBook3,2", "PowerBook Titanium", PMAC_TYPE_TITANIUM, core99_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE }, { "PowerBook3,3", "PowerBook Titanium II", PMAC_TYPE_TITANIUM2, core99_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE }, { "PowerBook3,4", "PowerBook Titanium III", PMAC_TYPE_TITANIUM3, core99_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE }, { "PowerBook3,5", "PowerBook Titanium IV", PMAC_TYPE_TITANIUM4, core99_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE }, { "PowerBook4,1", "iBook 2", PMAC_TYPE_IBOOK2, pangea_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE }, { "PowerBook4,2", "iBook 2", PMAC_TYPE_IBOOK2, pangea_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE }, { "PowerBook4,3", "iBook 2 rev. 2", PMAC_TYPE_IBOOK2, pangea_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE }, { "PowerBook5,1", "PowerBook G4 17\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, { "PowerBook5,2", "PowerBook G4 15\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, { "PowerBook5,3", "PowerBook G4 17\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, { "PowerBook5,4", "PowerBook G4 15\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, { "PowerBook5,5", "PowerBook G4 17\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, { "PowerBook5,6", "PowerBook G4 15\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, { "PowerBook5,7", "PowerBook G4 17\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, { "PowerBook5,8", "PowerBook G4 15\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE, }, { "PowerBook5,9", "PowerBook G4 17\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE, }, { "PowerBook6,1", "PowerBook G4 12\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, { "PowerBook6,2", "PowerBook G4", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, { "PowerBook6,3", "iBook G4", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, { "PowerBook6,4", "PowerBook G4 12\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, { "PowerBook6,5", "iBook G4", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, { "PowerBook6,7", "iBook G4", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, { "PowerBook6,8", "PowerBook G4 12\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, #else /* CONFIG_PPC64 */ { "PowerMac7,2", "PowerMac G5", PMAC_TYPE_POWERMAC_G5, g5_features, 0, }, #ifdef CONFIG_PPC64 { "PowerMac7,3", "PowerMac G5", PMAC_TYPE_POWERMAC_G5, g5_features, 0, }, { "PowerMac8,1", "iMac G5", PMAC_TYPE_IMAC_G5, g5_features, 0, }, { "PowerMac9,1", "PowerMac G5", PMAC_TYPE_POWERMAC_G5_U3L, g5_features, 0, }, { "PowerMac11,2", "PowerMac G5 Dual Core", PMAC_TYPE_POWERMAC_G5_U3L, g5_features, 0, }, { "PowerMac12,1", "iMac G5 (iSight)", PMAC_TYPE_POWERMAC_G5_U3L, g5_features, 0, }, { "RackMac3,1", "XServe G5", PMAC_TYPE_XSERVE_G5, g5_features, 0, }, #endif /* CONFIG_PPC64 */ #endif /* CONFIG_PPC64 */ }; /* * The toplevel feature_call callback */ long pmac_do_feature_call(unsigned int selector, ...) { struct device_node *node; long param, value; int i; feature_call func = NULL; va_list args; if (pmac_mb.features) for (i=0; pmac_mb.features[i].function; i++) if (pmac_mb.features[i].selector == selector) { func = pmac_mb.features[i].function; break; } if (!func) for (i=0; any_features[i].function; i++) if (any_features[i].selector == selector) { func = any_features[i].function; break; } if (!func) return -ENODEV; va_start(args, selector); node = (struct device_node*)va_arg(args, void*); param = va_arg(args, long); value = va_arg(args, long); va_end(args); return func(node, param, value); } static int __init probe_motherboard(void) { int i; struct macio_chip *macio = &macio_chips[0]; const char *model = NULL; struct device_node *dt; int ret = 0; /* Lookup known motherboard type in device-tree. First try an * exact match on the "model" property, then try a "compatible" * match is none is found. */ dt = of_find_node_by_name(NULL, "device-tree"); if (dt != NULL) model = of_get_property(dt, "model", NULL); for(i=0; model && i<ARRAY_SIZE(pmac_mb_defs); i++) { if (strcmp(model, pmac_mb_defs[i].model_string) == 0) { pmac_mb = pmac_mb_defs[i]; goto found; } } for(i=0; i<ARRAY_SIZE(pmac_mb_defs); i++) { if (of_machine_is_compatible(pmac_mb_defs[i].model_string)) { pmac_mb = pmac_mb_defs[i]; goto found; } } /* Fallback to selection depending on mac-io chip type */ switch(macio->type) { #ifndef CONFIG_PPC64 case macio_grand_central: pmac_mb.model_id = PMAC_TYPE_PSURGE; pmac_mb.model_name = "Unknown PowerSurge"; break; case macio_ohare: pmac_mb.model_id = PMAC_TYPE_UNKNOWN_OHARE; pmac_mb.model_name = "Unknown OHare-based"; break; case macio_heathrow: pmac_mb.model_id = PMAC_TYPE_UNKNOWN_HEATHROW; pmac_mb.model_name = "Unknown Heathrow-based"; pmac_mb.features = heathrow_desktop_features; break; case macio_paddington: pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PADDINGTON; pmac_mb.model_name = "Unknown Paddington-based"; pmac_mb.features = paddington_features; break; case macio_keylargo: pmac_mb.model_id = PMAC_TYPE_UNKNOWN_CORE99; pmac_mb.model_name = "Unknown Keylargo-based"; pmac_mb.features = core99_features; break; case macio_pangea: pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PANGEA; pmac_mb.model_name = "Unknown Pangea-based"; pmac_mb.features = pangea_features; break; case macio_intrepid: pmac_mb.model_id = PMAC_TYPE_UNKNOWN_INTREPID; pmac_mb.model_name = "Unknown Intrepid-based"; pmac_mb.features = intrepid_features; break; #else /* CONFIG_PPC64 */ case macio_keylargo2: pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2; pmac_mb.model_name = "Unknown K2-based"; pmac_mb.features = g5_features; break; case macio_shasta: pmac_mb.model_id = PMAC_TYPE_UNKNOWN_SHASTA; pmac_mb.model_name = "Unknown Shasta-based"; pmac_mb.features = g5_features; break; #endif /* CONFIG_PPC64 */ default: ret = -ENODEV; goto done; } found: #ifndef CONFIG_PPC64 /* Fixup Hooper vs. Comet */ if (pmac_mb.model_id == PMAC_TYPE_HOOPER) { u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4); if (!mach_id_ptr) { ret = -ENODEV; goto done; } /* Here, I used to disable the media-bay on comet. It * appears this is wrong, the floppy connector is actually * a kind of media-bay and works with the current driver. */ if (__raw_readl(mach_id_ptr) & 0x20000000UL) pmac_mb.model_id = PMAC_TYPE_COMET; iounmap(mach_id_ptr); } /* Set default value of powersave_nap on machines that support it. * It appears that uninorth rev 3 has a problem with it, we don't * enable it on those. In theory, the flush-on-lock property is * supposed to be set when not supported, but I'm not very confident * that all Apple OF revs did it properly, I do it the paranoid way. */ if (uninorth_base && uninorth_rev > 3) { struct device_node *np; for_each_of_cpu_node(np) { int cpu_count = 1; /* Nap mode not supported on SMP */ if (of_get_property(np, "flush-on-lock", NULL) || (cpu_count > 1)) { powersave_nap = 0; of_node_put(np); break; } cpu_count++; powersave_nap = 1; } } if (powersave_nap) printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n"); /* On CPUs that support it (750FX), lowspeed by default during * NAP mode */ powersave_lowspeed = 1; #else /* CONFIG_PPC64 */ powersave_nap = 1; #endif /* CONFIG_PPC64 */ /* Check for "mobile" machine */ if (model && (strncmp(model, "PowerBook", 9) == 0 || strncmp(model, "iBook", 5) == 0)) pmac_mb.board_flags |= PMAC_MB_MOBILE; printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name); done: of_node_put(dt); return ret; } /* Initialize the Core99 UniNorth host bridge and memory controller */ static void __init probe_uninorth(void) { const u32 *addrp; phys_addr_t address; unsigned long actrl; /* Locate core99 Uni-N */ uninorth_node = of_find_node_by_name(NULL, "uni-n"); uninorth_maj = 1; /* Locate G5 u3 */ if (uninorth_node == NULL) { uninorth_node = of_find_node_by_name(NULL, "u3"); uninorth_maj = 3; } /* Locate G5 u4 */ if (uninorth_node == NULL) { uninorth_node = of_find_node_by_name(NULL, "u4"); uninorth_maj = 4; } if (uninorth_node == NULL) { uninorth_maj = 0; return; } addrp = of_get_property(uninorth_node, "reg", NULL); if (addrp == NULL) return; address = of_translate_address(uninorth_node, addrp); if (address == 0) return; uninorth_base = ioremap(address, 0x40000); if (uninorth_base == NULL) return; uninorth_rev = in_be32(UN_REG(UNI_N_VERSION)); if (uninorth_maj == 3 || uninorth_maj == 4) { u3_ht_base = ioremap(address + U3_HT_CONFIG_BASE, 0x1000); if (u3_ht_base == NULL) { iounmap(uninorth_base); return; } } printk(KERN_INFO "Found %s memory controller & host bridge" " @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" : uninorth_maj == 4 ? "U4" : "UniNorth", (unsigned int)address, uninorth_rev); printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base); /* Set the arbitrer QAck delay according to what Apple does */ if (uninorth_rev < 0x11) { actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK; actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 : UNI_N_ARB_CTRL_QACK_DELAY) << UNI_N_ARB_CTRL_QACK_DELAY_SHIFT; UN_OUT(UNI_N_ARB_CTRL, actrl); } /* Some more magic as done by them in recent MacOS X on UniNorth * revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI * memory timeout */ if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) || uninorth_rev == 0xc0) UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff); } static void __init probe_one_macio(const char *name, const char *compat, int type) { struct device_node* node; int i; volatile u32 __iomem *base; const u32 *addrp, *revp; phys_addr_t addr; u64 size; for_each_node_by_name(node, name) { if (!compat) break; if (of_device_is_compatible(node, compat)) break; } if (!node) return; for(i=0; i<MAX_MACIO_CHIPS; i++) { if (!macio_chips[i].of_node) break; if (macio_chips[i].of_node == node) return; } if (i >= MAX_MACIO_CHIPS) { printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n"); printk(KERN_ERR "pmac_feature: %pOF skipped\n", node); return; } addrp = of_get_pci_address(node, 0, &size, NULL); if (addrp == NULL) { printk(KERN_ERR "pmac_feature: %pOF: can't find base !\n", node); return; } addr = of_translate_address(node, addrp); if (addr == 0) { printk(KERN_ERR "pmac_feature: %pOF, can't translate base !\n", node); return; } base = ioremap(addr, (unsigned long)size); if (!base) { printk(KERN_ERR "pmac_feature: %pOF, can't map mac-io chip !\n", node); return; } if (type == macio_keylargo || type == macio_keylargo2) { const u32 *did = of_get_property(node, "device-id", NULL); if (*did == 0x00000025) type = macio_pangea; if (*did == 0x0000003e) type = macio_intrepid; if (*did == 0x0000004f) type = macio_shasta; } macio_chips[i].of_node = node; macio_chips[i].type = type; macio_chips[i].base = base; macio_chips[i].flags = MACIO_FLAG_SCCA_ON | MACIO_FLAG_SCCB_ON; macio_chips[i].name = macio_names[type]; revp = of_get_property(node, "revision-id", NULL); if (revp) macio_chips[i].rev = *revp; printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n", macio_names[type], macio_chips[i].rev, macio_chips[i].base); } static int __init probe_macios(void) { /* Warning, ordering is important */ probe_one_macio("gc", NULL, macio_grand_central); probe_one_macio("ohare", NULL, macio_ohare); probe_one_macio("pci106b,7", NULL, macio_ohareII); probe_one_macio("mac-io", "keylargo", macio_keylargo); probe_one_macio("mac-io", "paddington", macio_paddington); probe_one_macio("mac-io", "gatwick", macio_gatwick); probe_one_macio("mac-io", "heathrow", macio_heathrow); probe_one_macio("mac-io", "K2-Keylargo", macio_keylargo2); /* Make sure the "main" macio chip appear first */ if (macio_chips[0].type == macio_gatwick && macio_chips[1].type == macio_heathrow) { struct macio_chip temp = macio_chips[0]; macio_chips[0] = macio_chips[1]; macio_chips[1] = temp; } if (macio_chips[0].type == macio_ohareII && macio_chips[1].type == macio_ohare) { struct macio_chip temp = macio_chips[0]; macio_chips[0] = macio_chips[1]; macio_chips[1] = temp; } macio_chips[0].lbus.index = 0; macio_chips[1].lbus.index = 1; return (macio_chips[0].of_node == NULL) ? -ENODEV : 0; } static void __init initial_serial_shutdown(struct device_node *np) { int len; const struct slot_names_prop { int count; char name[1]; } *slots; const char *conn; int port_type = PMAC_SCC_ASYNC; int modem = 0; slots = of_get_property(np, "slot-names", &len); conn = of_get_property(np, "AAPL,connector", &len); if (conn && (strcmp(conn, "infrared") == 0)) port_type = PMAC_SCC_IRDA; else if (of_device_is_compatible(np, "cobalt")) modem = 1; else if (slots && slots->count > 0) { if (strcmp(slots->name, "IrDA") == 0) port_type = PMAC_SCC_IRDA; else if (strcmp(slots->name, "Modem") == 0) modem = 1; } if (modem) pmac_call_feature(PMAC_FTR_MODEM_ENABLE, np, 0, 0); pmac_call_feature(PMAC_FTR_SCC_ENABLE, np, port_type, 0); } static void __init set_initial_features(void) { struct device_node *np; /* That hack appears to be necessary for some StarMax motherboards * but I'm not too sure it was audited for side-effects on other * ohare based machines... * Since I still have difficulties figuring the right way to * differentiate them all and since that hack was there for a long * time, I'll keep it around */ if (macio_chips[0].type == macio_ohare) { struct macio_chip *macio = &macio_chips[0]; np = of_find_node_by_name(NULL, "via-pmu"); if (np) MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); else MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES); of_node_put(np); } else if (macio_chips[1].type == macio_ohare) { struct macio_chip *macio = &macio_chips[1]; MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); } #ifdef CONFIG_PPC64 if (macio_chips[0].type == macio_keylargo2 || macio_chips[0].type == macio_shasta) { #ifndef CONFIG_SMP /* On SMP machines running UP, we have the second CPU eating * bus cycles. We need to take it off the bus. This is done * from pmac_smp for SMP kernels running on one CPU */ np = of_find_node_by_type(NULL, "cpu"); if (np != NULL) np = of_find_node_by_type(np, "cpu"); if (np != NULL) { g5_phy_disable_cpu1(); of_node_put(np); } #endif /* CONFIG_SMP */ /* Enable GMAC for now for PCI probing. It will be disabled * later on after PCI probe */ for_each_node_by_name(np, "ethernet") if (of_device_is_compatible(np, "K2-GMAC")) g5_gmac_enable(np, 0, 1); /* Enable FW before PCI probe. Will be disabled later on * Note: We should have a batter way to check that we are * dealing with uninorth internal cell and not a PCI cell * on the external PCI. The code below works though. */ for_each_node_by_name(np, "firewire") { if (of_device_is_compatible(np, "pci106b,5811")) { macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED; g5_fw_enable(np, 0, 1); } } } #else /* CONFIG_PPC64 */ if (macio_chips[0].type == macio_keylargo || macio_chips[0].type == macio_pangea || macio_chips[0].type == macio_intrepid) { /* Enable GMAC for now for PCI probing. It will be disabled * later on after PCI probe */ for_each_node_by_name(np, "ethernet") { if (np->parent && of_device_is_compatible(np->parent, "uni-north") && of_device_is_compatible(np, "gmac")) core99_gmac_enable(np, 0, 1); } /* Enable FW before PCI probe. Will be disabled later on * Note: We should have a batter way to check that we are * dealing with uninorth internal cell and not a PCI cell * on the external PCI. The code below works though. */ for_each_node_by_name(np, "firewire") { if (np->parent && of_device_is_compatible(np->parent, "uni-north") && (of_device_is_compatible(np, "pci106b,18") || of_device_is_compatible(np, "pci106b,30") || of_device_is_compatible(np, "pci11c1,5811"))) { macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED; core99_firewire_enable(np, 0, 1); } } /* Enable ATA-100 before PCI probe. */ for_each_node_by_name(np, "ata-6") { if (np->parent && of_device_is_compatible(np->parent, "uni-north") && of_device_is_compatible(np, "kauai-ata")) { core99_ata100_enable(np, 1); } } /* Switch airport off */ for_each_node_by_name(np, "radio") { if (np->parent == macio_chips[0].of_node) { macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON; core99_airport_enable(np, 0, 0); } } } /* On all machines that support sound PM, switch sound off */ if (macio_chips[0].of_node) pmac_do_feature_call(PMAC_FTR_SOUND_CHIP_ENABLE, macio_chips[0].of_node, 0, 0); /* While on some desktop G3s, we turn it back on */ if (macio_chips[0].of_node && macio_chips[0].type == macio_heathrow && (pmac_mb.model_id == PMAC_TYPE_GOSSAMER || pmac_mb.model_id == PMAC_TYPE_SILK)) { struct macio_chip *macio = &macio_chips[0]; MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N); } #endif /* CONFIG_PPC64 */ /* On all machines, switch modem & serial ports off */ for_each_node_by_name(np, "ch-a") initial_serial_shutdown(np); for_each_node_by_name(np, "ch-b") initial_serial_shutdown(np); } void __init pmac_feature_init(void) { /* Detect the UniNorth memory controller */ probe_uninorth(); /* Probe mac-io controllers */ if (probe_macios()) { printk(KERN_WARNING "No mac-io chip found\n"); return; } /* Probe machine type */ if (probe_motherboard()) printk(KERN_WARNING "Unknown PowerMac !\n"); /* Set some initial features (turn off some chips that will * be later turned on) */ set_initial_features(); } #if 0 static void dump_HT_speeds(char *name, u32 cfg, u32 frq) { int freqs[16] = { 200,300,400,500,600,800,1000,0,0,0,0,0,0,0,0,0 }; int bits[8] = { 8,16,0,32,2,4,0,0 }; int freq = (frq >> 8) & 0xf; if (freqs[freq] == 0) printk("%s: Unknown HT link frequency %x\n", name, freq); else printk("%s: %d MHz on main link, (%d in / %d out) bits width\n", name, freqs[freq], bits[(cfg >> 28) & 0x7], bits[(cfg >> 24) & 0x7]); } void __init pmac_check_ht_link(void) { u32 ufreq, freq, ucfg, cfg; struct device_node *pcix_node; u8 px_bus, px_devfn; struct pci_controller *px_hose; (void)in_be32(u3_ht_base + U3_HT_LINK_COMMAND); ucfg = cfg = in_be32(u3_ht_base + U3_HT_LINK_CONFIG); ufreq = freq = in_be32(u3_ht_base + U3_HT_LINK_FREQ); dump_HT_speeds("U3 HyperTransport", cfg, freq); pcix_node = of_find_compatible_node(NULL, "pci", "pci-x"); if (pcix_node == NULL) { printk("No PCI-X bridge found\n"); return; } if (pci_device_from_OF_node(pcix_node, &px_bus, &px_devfn) != 0) { printk("PCI-X bridge found but not matched to pci\n"); return; } px_hose = pci_find_hose_for_OF_device(pcix_node); if (px_hose == NULL) { printk("PCI-X bridge found but not matched to host\n"); return; } early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg); early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq); dump_HT_speeds("PCI-X HT Uplink", cfg, freq); early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg); early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq); dump_HT_speeds("PCI-X HT Downlink", cfg, freq); } #endif /* 0 */ /* * Early video resume hook */ static void (*pmac_early_vresume_proc)(void *data); static void *pmac_early_vresume_data; void pmac_set_early_video_resume(void (*proc)(void *data), void *data) { if (!machine_is(powermac)) return; preempt_disable(); pmac_early_vresume_proc = proc; pmac_early_vresume_data = data; preempt_enable(); } EXPORT_SYMBOL(pmac_set_early_video_resume); void pmac_call_early_video_resume(void) { if (pmac_early_vresume_proc) pmac_early_vresume_proc(pmac_early_vresume_data); } /* * AGP related suspend/resume code */ static struct pci_dev *pmac_agp_bridge; static int (*pmac_agp_suspend)(struct pci_dev *bridge); static int (*pmac_agp_resume)(struct pci_dev *bridge); void pmac_register_agp_pm(struct pci_dev *bridge, int (*suspend)(struct pci_dev *bridge), int (*resume)(struct pci_dev *bridge)) { if (suspend || resume) { pmac_agp_bridge = bridge; pmac_agp_suspend = suspend; pmac_agp_resume = resume; return; } if (bridge != pmac_agp_bridge) return; pmac_agp_suspend = pmac_agp_resume = NULL; return; } EXPORT_SYMBOL(pmac_register_agp_pm); void pmac_suspend_agp_for_card(struct pci_dev *dev) { if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL) return; if (pmac_agp_bridge->bus != dev->bus) return; pmac_agp_suspend(pmac_agp_bridge); } EXPORT_SYMBOL(pmac_suspend_agp_for_card); void pmac_resume_agp_for_card(struct pci_dev *dev) { if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL) return; if (pmac_agp_bridge->bus != dev->bus) return; pmac_agp_resume(pmac_agp_bridge); } EXPORT_SYMBOL(pmac_resume_agp_for_card); int pmac_get_uninorth_variant(void) { return uninorth_maj; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1