Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Wilken Gottwalt | 855 | 100.00% | 1 | 100.00% |
Total | 855 | 1 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * sun6i_hwspinlock.c - hardware spinlock driver for sun6i compatible Allwinner SoCs * Copyright (C) 2020 Wilken Gottwalt <wilken.gottwalt@posteo.net> */ #include <linux/clk.h> #include <linux/debugfs.h> #include <linux/errno.h> #include <linux/hwspinlock.h> #include <linux/io.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/reset.h> #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/types.h> #include "hwspinlock_internal.h" #define DRIVER_NAME "sun6i_hwspinlock" #define SPINLOCK_BASE_ID 0 /* there is only one hwspinlock device per SoC */ #define SPINLOCK_SYSSTATUS_REG 0x0000 #define SPINLOCK_LOCK_REGN 0x0100 #define SPINLOCK_NOTTAKEN 0 struct sun6i_hwspinlock_data { struct hwspinlock_device *bank; struct reset_control *reset; struct clk *ahb_clk; struct dentry *debugfs; int nlocks; }; #ifdef CONFIG_DEBUG_FS static int hwlocks_supported_show(struct seq_file *seqf, void *unused) { struct sun6i_hwspinlock_data *priv = seqf->private; seq_printf(seqf, "%d\n", priv->nlocks); return 0; } DEFINE_SHOW_ATTRIBUTE(hwlocks_supported); static void sun6i_hwspinlock_debugfs_init(struct sun6i_hwspinlock_data *priv) { priv->debugfs = debugfs_create_dir(DRIVER_NAME, NULL); debugfs_create_file("supported", 0444, priv->debugfs, priv, &hwlocks_supported_fops); } #else static void sun6i_hwspinlock_debugfs_init(struct sun6i_hwspinlock_data *priv) { } #endif static int sun6i_hwspinlock_trylock(struct hwspinlock *lock) { void __iomem *lock_addr = lock->priv; return (readl(lock_addr) == SPINLOCK_NOTTAKEN); } static void sun6i_hwspinlock_unlock(struct hwspinlock *lock) { void __iomem *lock_addr = lock->priv; writel(SPINLOCK_NOTTAKEN, lock_addr); } static const struct hwspinlock_ops sun6i_hwspinlock_ops = { .trylock = sun6i_hwspinlock_trylock, .unlock = sun6i_hwspinlock_unlock, }; static void sun6i_hwspinlock_disable(void *data) { struct sun6i_hwspinlock_data *priv = data; debugfs_remove_recursive(priv->debugfs); clk_disable_unprepare(priv->ahb_clk); reset_control_assert(priv->reset); } static int sun6i_hwspinlock_probe(struct platform_device *pdev) { struct sun6i_hwspinlock_data *priv; struct hwspinlock *hwlock; void __iomem *io_base; u32 num_banks; int err, i; io_base = devm_platform_ioremap_resource(pdev, SPINLOCK_BASE_ID); if (IS_ERR(io_base)) return PTR_ERR(io_base); priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; priv->ahb_clk = devm_clk_get(&pdev->dev, "ahb"); if (IS_ERR(priv->ahb_clk)) { err = PTR_ERR(priv->ahb_clk); dev_err(&pdev->dev, "unable to get AHB clock (%d)\n", err); return err; } priv->reset = devm_reset_control_get(&pdev->dev, "ahb"); if (IS_ERR(priv->reset)) return dev_err_probe(&pdev->dev, PTR_ERR(priv->reset), "unable to get reset control\n"); err = reset_control_deassert(priv->reset); if (err) { dev_err(&pdev->dev, "deassert reset control failure (%d)\n", err); return err; } err = clk_prepare_enable(priv->ahb_clk); if (err) { dev_err(&pdev->dev, "unable to prepare AHB clk (%d)\n", err); goto clk_fail; } /* * bit 28 and 29 represents the hwspinlock setup * * every datasheet (A64, A80, A83T, H3, H5, H6 ...) says the default value is 0x1 and 0x1 * to 0x4 represent 32, 64, 128 and 256 locks * but later datasheets (H5, H6) say 00, 01, 10, 11 represent 32, 64, 128 and 256 locks, * but that would mean H5 and H6 have 64 locks, while their datasheets talk about 32 locks * all the time, not a single mentioning of 64 locks * the 0x4 value is also not representable by 2 bits alone, so some datasheets are not * correct * one thing have all in common, default value of the sysstatus register is 0x10000000, * which results in bit 28 being set * this is the reason 0x1 is considered being 32 locks and bit 30 is taken into account * verified on H2+ (datasheet 0x1 = 32 locks) and H5 (datasheet 01 = 64 locks) */ num_banks = readl(io_base + SPINLOCK_SYSSTATUS_REG) >> 28; switch (num_banks) { case 1 ... 4: priv->nlocks = 1 << (4 + num_banks); break; default: err = -EINVAL; dev_err(&pdev->dev, "unsupported hwspinlock setup (%d)\n", num_banks); goto bank_fail; } priv->bank = devm_kzalloc(&pdev->dev, struct_size(priv->bank, lock, priv->nlocks), GFP_KERNEL); if (!priv->bank) { err = -ENOMEM; goto bank_fail; } for (i = 0; i < priv->nlocks; ++i) { hwlock = &priv->bank->lock[i]; hwlock->priv = io_base + SPINLOCK_LOCK_REGN + sizeof(u32) * i; } /* failure of debugfs is considered non-fatal */ sun6i_hwspinlock_debugfs_init(priv); if (IS_ERR(priv->debugfs)) priv->debugfs = NULL; err = devm_add_action_or_reset(&pdev->dev, sun6i_hwspinlock_disable, priv); if (err) { dev_err(&pdev->dev, "failed to add hwspinlock disable action\n"); goto bank_fail; } platform_set_drvdata(pdev, priv); return devm_hwspin_lock_register(&pdev->dev, priv->bank, &sun6i_hwspinlock_ops, SPINLOCK_BASE_ID, priv->nlocks); bank_fail: clk_disable_unprepare(priv->ahb_clk); clk_fail: reset_control_assert(priv->reset); return err; } static const struct of_device_id sun6i_hwspinlock_ids[] = { { .compatible = "allwinner,sun6i-a31-hwspinlock", }, {}, }; MODULE_DEVICE_TABLE(of, sun6i_hwspinlock_ids); static struct platform_driver sun6i_hwspinlock_driver = { .probe = sun6i_hwspinlock_probe, .driver = { .name = DRIVER_NAME, .of_match_table = sun6i_hwspinlock_ids, }, }; module_platform_driver(sun6i_hwspinlock_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("SUN6I hardware spinlock driver"); MODULE_AUTHOR("Wilken Gottwalt <wilken.gottwalt@posteo.net>");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1