Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Ingi Kim | 1528 | 91.94% | 2 | 18.18% |
Christophe Jaillet | 77 | 4.63% | 2 | 18.18% |
Jacek Anaszewski | 26 | 1.56% | 2 | 18.18% |
Arnd Bergmann | 12 | 0.72% | 1 | 9.09% |
Luis de Bethencourt | 7 | 0.42% | 1 | 9.09% |
Marek Behún | 6 | 0.36% | 1 | 9.09% |
Uwe Kleine-König | 4 | 0.24% | 1 | 9.09% |
Thomas Gleixner | 2 | 0.12% | 1 | 9.09% |
Total | 1662 | 11 |
// SPDX-License-Identifier: GPL-2.0-only /* * LED driver : leds-ktd2692.c * * Copyright (C) 2015 Samsung Electronics * Ingi Kim <ingi2.kim@samsung.com> */ #include <linux/delay.h> #include <linux/err.h> #include <linux/gpio/consumer.h> #include <linux/led-class-flash.h> #include <linux/module.h> #include <linux/mutex.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/regulator/consumer.h> /* Value related the movie mode */ #define KTD2692_MOVIE_MODE_CURRENT_LEVELS 16 #define KTD2692_MM_TO_FL_RATIO(x) ((x) / 3) #define KTD2692_MM_MIN_CURR_THRESHOLD_SCALE 8 /* Value related the flash mode */ #define KTD2692_FLASH_MODE_TIMEOUT_LEVELS 8 #define KTD2692_FLASH_MODE_TIMEOUT_DISABLE 0 #define KTD2692_FLASH_MODE_CURR_PERCENT(x) (((x) * 16) / 100) /* Macro for getting offset of flash timeout */ #define GET_TIMEOUT_OFFSET(timeout, step) ((timeout) / (step)) /* Base register address */ #define KTD2692_REG_LVP_BASE 0x00 #define KTD2692_REG_FLASH_TIMEOUT_BASE 0x20 #define KTD2692_REG_MM_MIN_CURR_THRESHOLD_BASE 0x40 #define KTD2692_REG_MOVIE_CURRENT_BASE 0x60 #define KTD2692_REG_FLASH_CURRENT_BASE 0x80 #define KTD2692_REG_MODE_BASE 0xA0 /* Set bit coding time for expresswire interface */ #define KTD2692_TIME_RESET_US 700 #define KTD2692_TIME_DATA_START_TIME_US 10 #define KTD2692_TIME_HIGH_END_OF_DATA_US 350 #define KTD2692_TIME_LOW_END_OF_DATA_US 10 #define KTD2692_TIME_SHORT_BITSET_US 4 #define KTD2692_TIME_LONG_BITSET_US 12 /* KTD2692 default length of name */ #define KTD2692_NAME_LENGTH 20 enum ktd2692_bitset { KTD2692_LOW = 0, KTD2692_HIGH, }; /* Movie / Flash Mode Control */ enum ktd2692_led_mode { KTD2692_MODE_DISABLE = 0, /* default */ KTD2692_MODE_MOVIE, KTD2692_MODE_FLASH, }; struct ktd2692_led_config_data { /* maximum LED current in movie mode */ u32 movie_max_microamp; /* maximum LED current in flash mode */ u32 flash_max_microamp; /* maximum flash timeout */ u32 flash_max_timeout; /* max LED brightness level */ enum led_brightness max_brightness; }; struct ktd2692_context { /* Related LED Flash class device */ struct led_classdev_flash fled_cdev; /* secures access to the device */ struct mutex lock; struct regulator *regulator; struct gpio_desc *aux_gpio; struct gpio_desc *ctrl_gpio; enum ktd2692_led_mode mode; enum led_brightness torch_brightness; }; static struct ktd2692_context *fled_cdev_to_led( struct led_classdev_flash *fled_cdev) { return container_of(fled_cdev, struct ktd2692_context, fled_cdev); } static void ktd2692_expresswire_start(struct ktd2692_context *led) { gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH); udelay(KTD2692_TIME_DATA_START_TIME_US); } static void ktd2692_expresswire_reset(struct ktd2692_context *led) { gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW); udelay(KTD2692_TIME_RESET_US); } static void ktd2692_expresswire_end(struct ktd2692_context *led) { gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW); udelay(KTD2692_TIME_LOW_END_OF_DATA_US); gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH); udelay(KTD2692_TIME_HIGH_END_OF_DATA_US); } static void ktd2692_expresswire_set_bit(struct ktd2692_context *led, bool bit) { /* * The Low Bit(0) and High Bit(1) is based on a time detection * algorithm between time low and time high * Time_(L_LB) : Low time of the Low Bit(0) * Time_(H_LB) : High time of the LOW Bit(0) * Time_(L_HB) : Low time of the High Bit(1) * Time_(H_HB) : High time of the High Bit(1) * * It can be simplified to: * Low Bit(0) : 2 * Time_(H_LB) < Time_(L_LB) * High Bit(1) : 2 * Time_(L_HB) < Time_(H_HB) * HIGH ___ ____ _.. _________ ___ * |_________| |_.. |____| |__| * LOW <L_LB> <H_LB> <L_HB> <H_HB> * [ Low Bit (0) ] [ High Bit(1) ] */ if (bit) { gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW); udelay(KTD2692_TIME_SHORT_BITSET_US); gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH); udelay(KTD2692_TIME_LONG_BITSET_US); } else { gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW); udelay(KTD2692_TIME_LONG_BITSET_US); gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH); udelay(KTD2692_TIME_SHORT_BITSET_US); } } static void ktd2692_expresswire_write(struct ktd2692_context *led, u8 value) { int i; ktd2692_expresswire_start(led); for (i = 7; i >= 0; i--) ktd2692_expresswire_set_bit(led, value & BIT(i)); ktd2692_expresswire_end(led); } static int ktd2692_led_brightness_set(struct led_classdev *led_cdev, enum led_brightness brightness) { struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev); struct ktd2692_context *led = fled_cdev_to_led(fled_cdev); mutex_lock(&led->lock); if (brightness == LED_OFF) { led->mode = KTD2692_MODE_DISABLE; gpiod_direction_output(led->aux_gpio, KTD2692_LOW); } else { ktd2692_expresswire_write(led, brightness | KTD2692_REG_MOVIE_CURRENT_BASE); led->mode = KTD2692_MODE_MOVIE; } ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE); mutex_unlock(&led->lock); return 0; } static int ktd2692_led_flash_strobe_set(struct led_classdev_flash *fled_cdev, bool state) { struct ktd2692_context *led = fled_cdev_to_led(fled_cdev); struct led_flash_setting *timeout = &fled_cdev->timeout; u32 flash_tm_reg; mutex_lock(&led->lock); if (state) { flash_tm_reg = GET_TIMEOUT_OFFSET(timeout->val, timeout->step); ktd2692_expresswire_write(led, flash_tm_reg | KTD2692_REG_FLASH_TIMEOUT_BASE); led->mode = KTD2692_MODE_FLASH; gpiod_direction_output(led->aux_gpio, KTD2692_HIGH); } else { led->mode = KTD2692_MODE_DISABLE; gpiod_direction_output(led->aux_gpio, KTD2692_LOW); } ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE); fled_cdev->led_cdev.brightness = LED_OFF; led->mode = KTD2692_MODE_DISABLE; mutex_unlock(&led->lock); return 0; } static int ktd2692_led_flash_timeout_set(struct led_classdev_flash *fled_cdev, u32 timeout) { return 0; } static void ktd2692_init_movie_current_max(struct ktd2692_led_config_data *cfg) { u32 offset, step; u32 movie_current_microamp; offset = KTD2692_MOVIE_MODE_CURRENT_LEVELS; step = KTD2692_MM_TO_FL_RATIO(cfg->flash_max_microamp) / KTD2692_MOVIE_MODE_CURRENT_LEVELS; do { movie_current_microamp = step * offset; offset--; } while ((movie_current_microamp > cfg->movie_max_microamp) && (offset > 0)); cfg->max_brightness = offset; } static void ktd2692_init_flash_timeout(struct led_classdev_flash *fled_cdev, struct ktd2692_led_config_data *cfg) { struct led_flash_setting *setting; setting = &fled_cdev->timeout; setting->min = KTD2692_FLASH_MODE_TIMEOUT_DISABLE; setting->max = cfg->flash_max_timeout; setting->step = cfg->flash_max_timeout / (KTD2692_FLASH_MODE_TIMEOUT_LEVELS - 1); setting->val = cfg->flash_max_timeout; } static void ktd2692_setup(struct ktd2692_context *led) { led->mode = KTD2692_MODE_DISABLE; ktd2692_expresswire_reset(led); gpiod_direction_output(led->aux_gpio, KTD2692_LOW); ktd2692_expresswire_write(led, (KTD2692_MM_MIN_CURR_THRESHOLD_SCALE - 1) | KTD2692_REG_MM_MIN_CURR_THRESHOLD_BASE); ktd2692_expresswire_write(led, KTD2692_FLASH_MODE_CURR_PERCENT(45) | KTD2692_REG_FLASH_CURRENT_BASE); } static void regulator_disable_action(void *_data) { struct device *dev = _data; struct ktd2692_context *led = dev_get_drvdata(dev); int ret; ret = regulator_disable(led->regulator); if (ret) dev_err(dev, "Failed to disable supply: %d\n", ret); } static int ktd2692_parse_dt(struct ktd2692_context *led, struct device *dev, struct ktd2692_led_config_data *cfg) { struct device_node *np = dev_of_node(dev); struct device_node *child_node; int ret; if (!dev_of_node(dev)) return -ENXIO; led->ctrl_gpio = devm_gpiod_get(dev, "ctrl", GPIOD_ASIS); ret = PTR_ERR_OR_ZERO(led->ctrl_gpio); if (ret) { dev_err(dev, "cannot get ctrl-gpios %d\n", ret); return ret; } led->aux_gpio = devm_gpiod_get(dev, "aux", GPIOD_ASIS); ret = PTR_ERR_OR_ZERO(led->aux_gpio); if (ret) { dev_err(dev, "cannot get aux-gpios %d\n", ret); return ret; } led->regulator = devm_regulator_get(dev, "vin"); if (IS_ERR(led->regulator)) led->regulator = NULL; if (led->regulator) { ret = regulator_enable(led->regulator); if (ret) { dev_err(dev, "Failed to enable supply: %d\n", ret); } else { ret = devm_add_action_or_reset(dev, regulator_disable_action, dev); if (ret) return ret; } } child_node = of_get_next_available_child(np, NULL); if (!child_node) { dev_err(dev, "No DT child node found for connected LED.\n"); return -EINVAL; } led->fled_cdev.led_cdev.name = of_get_property(child_node, "label", NULL) ? : child_node->name; ret = of_property_read_u32(child_node, "led-max-microamp", &cfg->movie_max_microamp); if (ret) { dev_err(dev, "failed to parse led-max-microamp\n"); goto err_parse_dt; } ret = of_property_read_u32(child_node, "flash-max-microamp", &cfg->flash_max_microamp); if (ret) { dev_err(dev, "failed to parse flash-max-microamp\n"); goto err_parse_dt; } ret = of_property_read_u32(child_node, "flash-max-timeout-us", &cfg->flash_max_timeout); if (ret) { dev_err(dev, "failed to parse flash-max-timeout-us\n"); goto err_parse_dt; } err_parse_dt: of_node_put(child_node); return ret; } static const struct led_flash_ops flash_ops = { .strobe_set = ktd2692_led_flash_strobe_set, .timeout_set = ktd2692_led_flash_timeout_set, }; static int ktd2692_probe(struct platform_device *pdev) { struct ktd2692_context *led; struct led_classdev *led_cdev; struct led_classdev_flash *fled_cdev; struct ktd2692_led_config_data led_cfg; int ret; led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL); if (!led) return -ENOMEM; fled_cdev = &led->fled_cdev; led_cdev = &fled_cdev->led_cdev; ret = ktd2692_parse_dt(led, &pdev->dev, &led_cfg); if (ret) return ret; ktd2692_init_flash_timeout(fled_cdev, &led_cfg); ktd2692_init_movie_current_max(&led_cfg); fled_cdev->ops = &flash_ops; led_cdev->max_brightness = led_cfg.max_brightness; led_cdev->brightness_set_blocking = ktd2692_led_brightness_set; led_cdev->flags |= LED_CORE_SUSPENDRESUME | LED_DEV_CAP_FLASH; mutex_init(&led->lock); platform_set_drvdata(pdev, led); ret = led_classdev_flash_register(&pdev->dev, fled_cdev); if (ret) { dev_err(&pdev->dev, "can't register LED %s\n", led_cdev->name); mutex_destroy(&led->lock); return ret; } ktd2692_setup(led); return 0; } static int ktd2692_remove(struct platform_device *pdev) { struct ktd2692_context *led = platform_get_drvdata(pdev); led_classdev_flash_unregister(&led->fled_cdev); mutex_destroy(&led->lock); return 0; } static const struct of_device_id ktd2692_match[] = { { .compatible = "kinetic,ktd2692", }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, ktd2692_match); static struct platform_driver ktd2692_driver = { .driver = { .name = "ktd2692", .of_match_table = ktd2692_match, }, .probe = ktd2692_probe, .remove = ktd2692_remove, }; module_platform_driver(ktd2692_driver); MODULE_AUTHOR("Ingi Kim <ingi2.kim@samsung.com>"); MODULE_DESCRIPTION("Kinetic KTD2692 LED driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1