Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Weifeng Voon | 3219 | 62.09% | 9 | 24.32% |
Wong Vee Khee | 649 | 12.52% | 10 | 27.03% |
Ong Boon Leong | 608 | 11.73% | 3 | 8.11% |
Tan, Tee Min | 515 | 9.93% | 2 | 5.41% |
Andy Shevchenko | 112 | 2.16% | 6 | 16.22% |
Noor Azura Ahmad Tarmizi | 24 | 0.46% | 1 | 2.70% |
Chuah, Kim Tatt | 17 | 0.33% | 1 | 2.70% |
Rusaimi Amira Ruslan | 11 | 0.21% | 1 | 2.70% |
Mohammad Athari Bin Ismail | 8 | 0.15% | 1 | 2.70% |
Dan Carpenter | 8 | 0.15% | 1 | 2.70% |
Michael Sit Wei Hong | 7 | 0.14% | 1 | 2.70% |
Ling Pei Lee | 6 | 0.12% | 1 | 2.70% |
Total | 5184 | 37 |
// SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2020, Intel Corporation */ #include <linux/clk-provider.h> #include <linux/pci.h> #include <linux/dmi.h> #include "dwmac-intel.h" #include "dwmac4.h" #include "stmmac.h" #include "stmmac_ptp.h" struct intel_priv_data { int mdio_adhoc_addr; /* mdio address for serdes & etc */ unsigned long crossts_adj; bool is_pse; }; /* This struct is used to associate PCI Function of MAC controller on a board, * discovered via DMI, with the address of PHY connected to the MAC. The * negative value of the address means that MAC controller is not connected * with PHY. */ struct stmmac_pci_func_data { unsigned int func; int phy_addr; }; struct stmmac_pci_dmi_data { const struct stmmac_pci_func_data *func; size_t nfuncs; }; struct stmmac_pci_info { int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat); }; static int stmmac_pci_find_phy_addr(struct pci_dev *pdev, const struct dmi_system_id *dmi_list) { const struct stmmac_pci_func_data *func_data; const struct stmmac_pci_dmi_data *dmi_data; const struct dmi_system_id *dmi_id; int func = PCI_FUNC(pdev->devfn); size_t n; dmi_id = dmi_first_match(dmi_list); if (!dmi_id) return -ENODEV; dmi_data = dmi_id->driver_data; func_data = dmi_data->func; for (n = 0; n < dmi_data->nfuncs; n++, func_data++) if (func_data->func == func) return func_data->phy_addr; return -ENODEV; } static int serdes_status_poll(struct stmmac_priv *priv, int phyaddr, int phyreg, u32 mask, u32 val) { unsigned int retries = 10; int val_rd; do { val_rd = mdiobus_read(priv->mii, phyaddr, phyreg); if ((val_rd & mask) == (val & mask)) return 0; udelay(POLL_DELAY_US); } while (--retries); return -ETIMEDOUT; } static int intel_serdes_powerup(struct net_device *ndev, void *priv_data) { struct intel_priv_data *intel_priv = priv_data; struct stmmac_priv *priv = netdev_priv(ndev); int serdes_phy_addr = 0; u32 data = 0; if (!intel_priv->mdio_adhoc_addr) return 0; serdes_phy_addr = intel_priv->mdio_adhoc_addr; /* Set the serdes rate and the PCLK rate */ data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0); data &= ~SERDES_RATE_MASK; data &= ~SERDES_PCLK_MASK; if (priv->plat->max_speed == 2500) data |= SERDES_RATE_PCIE_GEN2 << SERDES_RATE_PCIE_SHIFT | SERDES_PCLK_37p5MHZ << SERDES_PCLK_SHIFT; else data |= SERDES_RATE_PCIE_GEN1 << SERDES_RATE_PCIE_SHIFT | SERDES_PCLK_70MHZ << SERDES_PCLK_SHIFT; mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data); /* assert clk_req */ data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0); data |= SERDES_PLL_CLK; mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data); /* check for clk_ack assertion */ data = serdes_status_poll(priv, serdes_phy_addr, SERDES_GSR0, SERDES_PLL_CLK, SERDES_PLL_CLK); if (data) { dev_err(priv->device, "Serdes PLL clk request timeout\n"); return data; } /* assert lane reset */ data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0); data |= SERDES_RST; mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data); /* check for assert lane reset reflection */ data = serdes_status_poll(priv, serdes_phy_addr, SERDES_GSR0, SERDES_RST, SERDES_RST); if (data) { dev_err(priv->device, "Serdes assert lane reset timeout\n"); return data; } /* move power state to P0 */ data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0); data &= ~SERDES_PWR_ST_MASK; data |= SERDES_PWR_ST_P0 << SERDES_PWR_ST_SHIFT; mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data); /* Check for P0 state */ data = serdes_status_poll(priv, serdes_phy_addr, SERDES_GSR0, SERDES_PWR_ST_MASK, SERDES_PWR_ST_P0 << SERDES_PWR_ST_SHIFT); if (data) { dev_err(priv->device, "Serdes power state P0 timeout.\n"); return data; } /* PSE only - ungate SGMII PHY Rx Clock */ if (intel_priv->is_pse) mdiobus_modify(priv->mii, serdes_phy_addr, SERDES_GCR0, 0, SERDES_PHY_RX_CLK); return 0; } static void intel_serdes_powerdown(struct net_device *ndev, void *intel_data) { struct intel_priv_data *intel_priv = intel_data; struct stmmac_priv *priv = netdev_priv(ndev); int serdes_phy_addr = 0; u32 data = 0; if (!intel_priv->mdio_adhoc_addr) return; serdes_phy_addr = intel_priv->mdio_adhoc_addr; /* PSE only - gate SGMII PHY Rx Clock */ if (intel_priv->is_pse) mdiobus_modify(priv->mii, serdes_phy_addr, SERDES_GCR0, SERDES_PHY_RX_CLK, 0); /* move power state to P3 */ data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0); data &= ~SERDES_PWR_ST_MASK; data |= SERDES_PWR_ST_P3 << SERDES_PWR_ST_SHIFT; mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data); /* Check for P3 state */ data = serdes_status_poll(priv, serdes_phy_addr, SERDES_GSR0, SERDES_PWR_ST_MASK, SERDES_PWR_ST_P3 << SERDES_PWR_ST_SHIFT); if (data) { dev_err(priv->device, "Serdes power state P3 timeout\n"); return; } /* de-assert clk_req */ data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0); data &= ~SERDES_PLL_CLK; mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data); /* check for clk_ack de-assert */ data = serdes_status_poll(priv, serdes_phy_addr, SERDES_GSR0, SERDES_PLL_CLK, (u32)~SERDES_PLL_CLK); if (data) { dev_err(priv->device, "Serdes PLL clk de-assert timeout\n"); return; } /* de-assert lane reset */ data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0); data &= ~SERDES_RST; mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data); /* check for de-assert lane reset reflection */ data = serdes_status_poll(priv, serdes_phy_addr, SERDES_GSR0, SERDES_RST, (u32)~SERDES_RST); if (data) { dev_err(priv->device, "Serdes de-assert lane reset timeout\n"); return; } } static void intel_speed_mode_2500(struct net_device *ndev, void *intel_data) { struct intel_priv_data *intel_priv = intel_data; struct stmmac_priv *priv = netdev_priv(ndev); int serdes_phy_addr = 0; u32 data = 0; serdes_phy_addr = intel_priv->mdio_adhoc_addr; /* Determine the link speed mode: 2.5Gbps/1Gbps */ data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR); if (((data & SERDES_LINK_MODE_MASK) >> SERDES_LINK_MODE_SHIFT) == SERDES_LINK_MODE_2G5) { dev_info(priv->device, "Link Speed Mode: 2.5Gbps\n"); priv->plat->max_speed = 2500; priv->plat->phy_interface = PHY_INTERFACE_MODE_2500BASEX; priv->plat->mdio_bus_data->xpcs_an_inband = false; } else { priv->plat->max_speed = 1000; priv->plat->phy_interface = PHY_INTERFACE_MODE_SGMII; priv->plat->mdio_bus_data->xpcs_an_inband = true; } } /* Program PTP Clock Frequency for different variant of * Intel mGBE that has slightly different GPO mapping */ static void intel_mgbe_ptp_clk_freq_config(void *npriv) { struct stmmac_priv *priv = (struct stmmac_priv *)npriv; struct intel_priv_data *intel_priv; u32 gpio_value; intel_priv = (struct intel_priv_data *)priv->plat->bsp_priv; gpio_value = readl(priv->ioaddr + GMAC_GPIO_STATUS); if (intel_priv->is_pse) { /* For PSE GbE, use 200MHz */ gpio_value &= ~PSE_PTP_CLK_FREQ_MASK; gpio_value |= PSE_PTP_CLK_FREQ_200MHZ; } else { /* For PCH GbE, use 200MHz */ gpio_value &= ~PCH_PTP_CLK_FREQ_MASK; gpio_value |= PCH_PTP_CLK_FREQ_200MHZ; } writel(gpio_value, priv->ioaddr + GMAC_GPIO_STATUS); } static void get_arttime(struct mii_bus *mii, int intel_adhoc_addr, u64 *art_time) { u64 ns; ns = mdiobus_read(mii, intel_adhoc_addr, PMC_ART_VALUE3); ns <<= GMAC4_ART_TIME_SHIFT; ns |= mdiobus_read(mii, intel_adhoc_addr, PMC_ART_VALUE2); ns <<= GMAC4_ART_TIME_SHIFT; ns |= mdiobus_read(mii, intel_adhoc_addr, PMC_ART_VALUE1); ns <<= GMAC4_ART_TIME_SHIFT; ns |= mdiobus_read(mii, intel_adhoc_addr, PMC_ART_VALUE0); *art_time = ns; } static int intel_crosststamp(ktime_t *device, struct system_counterval_t *system, void *ctx) { struct intel_priv_data *intel_priv; struct stmmac_priv *priv = (struct stmmac_priv *)ctx; void __iomem *ptpaddr = priv->ptpaddr; void __iomem *ioaddr = priv->hw->pcsr; unsigned long flags; u64 art_time = 0; u64 ptp_time = 0; u32 num_snapshot; u32 gpio_value; u32 acr_value; int ret; u32 v; int i; if (!boot_cpu_has(X86_FEATURE_ART)) return -EOPNOTSUPP; intel_priv = priv->plat->bsp_priv; /* Both internal crosstimestamping and external triggered event * timestamping cannot be run concurrently. */ if (priv->plat->ext_snapshot_en) return -EBUSY; mutex_lock(&priv->aux_ts_lock); /* Enable Internal snapshot trigger */ acr_value = readl(ptpaddr + PTP_ACR); acr_value &= ~PTP_ACR_MASK; switch (priv->plat->int_snapshot_num) { case AUX_SNAPSHOT0: acr_value |= PTP_ACR_ATSEN0; break; case AUX_SNAPSHOT1: acr_value |= PTP_ACR_ATSEN1; break; case AUX_SNAPSHOT2: acr_value |= PTP_ACR_ATSEN2; break; case AUX_SNAPSHOT3: acr_value |= PTP_ACR_ATSEN3; break; default: mutex_unlock(&priv->aux_ts_lock); return -EINVAL; } writel(acr_value, ptpaddr + PTP_ACR); /* Clear FIFO */ acr_value = readl(ptpaddr + PTP_ACR); acr_value |= PTP_ACR_ATSFC; writel(acr_value, ptpaddr + PTP_ACR); /* Release the mutex */ mutex_unlock(&priv->aux_ts_lock); /* Trigger Internal snapshot signal * Create a rising edge by just toggle the GPO1 to low * and back to high. */ gpio_value = readl(ioaddr + GMAC_GPIO_STATUS); gpio_value &= ~GMAC_GPO1; writel(gpio_value, ioaddr + GMAC_GPIO_STATUS); gpio_value |= GMAC_GPO1; writel(gpio_value, ioaddr + GMAC_GPIO_STATUS); /* Poll for time sync operation done */ ret = readl_poll_timeout(priv->ioaddr + GMAC_INT_STATUS, v, (v & GMAC_INT_TSIE), 100, 10000); if (ret == -ETIMEDOUT) { pr_err("%s: Wait for time sync operation timeout\n", __func__); return ret; } num_snapshot = (readl(ioaddr + GMAC_TIMESTAMP_STATUS) & GMAC_TIMESTAMP_ATSNS_MASK) >> GMAC_TIMESTAMP_ATSNS_SHIFT; /* Repeat until the timestamps are from the FIFO last segment */ for (i = 0; i < num_snapshot; i++) { spin_lock_irqsave(&priv->ptp_lock, flags); stmmac_get_ptptime(priv, ptpaddr, &ptp_time); *device = ns_to_ktime(ptp_time); spin_unlock_irqrestore(&priv->ptp_lock, flags); get_arttime(priv->mii, intel_priv->mdio_adhoc_addr, &art_time); *system = convert_art_to_tsc(art_time); } system->cycles *= intel_priv->crossts_adj; return 0; } static void intel_mgbe_pse_crossts_adj(struct intel_priv_data *intel_priv, int base) { if (boot_cpu_has(X86_FEATURE_ART)) { unsigned int art_freq; /* On systems that support ART, ART frequency can be obtained * from ECX register of CPUID leaf (0x15). */ art_freq = cpuid_ecx(ART_CPUID_LEAF); do_div(art_freq, base); intel_priv->crossts_adj = art_freq; } } static void common_default_data(struct plat_stmmacenet_data *plat) { plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */ plat->has_gmac = 1; plat->force_sf_dma_mode = 1; plat->mdio_bus_data->needs_reset = true; /* Set default value for multicast hash bins */ plat->multicast_filter_bins = HASH_TABLE_SIZE; /* Set default value for unicast filter entries */ plat->unicast_filter_entries = 1; /* Set the maxmtu to a default of JUMBO_LEN */ plat->maxmtu = JUMBO_LEN; /* Set default number of RX and TX queues to use */ plat->tx_queues_to_use = 1; plat->rx_queues_to_use = 1; /* Disable Priority config by default */ plat->tx_queues_cfg[0].use_prio = false; plat->rx_queues_cfg[0].use_prio = false; /* Disable RX queues routing by default */ plat->rx_queues_cfg[0].pkt_route = 0x0; } static int intel_mgbe_common_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { char clk_name[20]; int ret; int i; plat->pdev = pdev; plat->phy_addr = -1; plat->clk_csr = 5; plat->has_gmac = 0; plat->has_gmac4 = 1; plat->force_sf_dma_mode = 0; plat->tso_en = 1; /* Multiplying factor to the clk_eee_i clock time * period to make it closer to 100 ns. This value * should be programmed such that the clk_eee_time_period * * (MULT_FACT_100NS + 1) should be within 80 ns to 120 ns * clk_eee frequency is 19.2Mhz * clk_eee_time_period is 52ns * 52ns * (1 + 1) = 104ns * MULT_FACT_100NS = 1 */ plat->mult_fact_100ns = 1; plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP; for (i = 0; i < plat->rx_queues_to_use; i++) { plat->rx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB; plat->rx_queues_cfg[i].chan = i; /* Disable Priority config by default */ plat->rx_queues_cfg[i].use_prio = false; /* Disable RX queues routing by default */ plat->rx_queues_cfg[i].pkt_route = 0x0; } for (i = 0; i < plat->tx_queues_to_use; i++) { plat->tx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB; /* Disable Priority config by default */ plat->tx_queues_cfg[i].use_prio = false; /* Default TX Q0 to use TSO and rest TXQ for TBS */ if (i > 0) plat->tx_queues_cfg[i].tbs_en = 1; } /* FIFO size is 4096 bytes for 1 tx/rx queue */ plat->tx_fifo_size = plat->tx_queues_to_use * 4096; plat->rx_fifo_size = plat->rx_queues_to_use * 4096; plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR; plat->tx_queues_cfg[0].weight = 0x09; plat->tx_queues_cfg[1].weight = 0x0A; plat->tx_queues_cfg[2].weight = 0x0B; plat->tx_queues_cfg[3].weight = 0x0C; plat->tx_queues_cfg[4].weight = 0x0D; plat->tx_queues_cfg[5].weight = 0x0E; plat->tx_queues_cfg[6].weight = 0x0F; plat->tx_queues_cfg[7].weight = 0x10; plat->dma_cfg->pbl = 32; plat->dma_cfg->pblx8 = true; plat->dma_cfg->fixed_burst = 0; plat->dma_cfg->mixed_burst = 0; plat->dma_cfg->aal = 0; plat->dma_cfg->dche = true; plat->axi = devm_kzalloc(&pdev->dev, sizeof(*plat->axi), GFP_KERNEL); if (!plat->axi) return -ENOMEM; plat->axi->axi_lpi_en = 0; plat->axi->axi_xit_frm = 0; plat->axi->axi_wr_osr_lmt = 1; plat->axi->axi_rd_osr_lmt = 1; plat->axi->axi_blen[0] = 4; plat->axi->axi_blen[1] = 8; plat->axi->axi_blen[2] = 16; plat->ptp_max_adj = plat->clk_ptp_rate; plat->eee_usecs_rate = plat->clk_ptp_rate; /* Set system clock */ sprintf(clk_name, "%s-%s", "stmmac", pci_name(pdev)); plat->stmmac_clk = clk_register_fixed_rate(&pdev->dev, clk_name, NULL, 0, plat->clk_ptp_rate); if (IS_ERR(plat->stmmac_clk)) { dev_warn(&pdev->dev, "Fail to register stmmac-clk\n"); plat->stmmac_clk = NULL; } ret = clk_prepare_enable(plat->stmmac_clk); if (ret) { clk_unregister_fixed_rate(plat->stmmac_clk); return ret; } plat->ptp_clk_freq_config = intel_mgbe_ptp_clk_freq_config; /* Set default value for multicast hash bins */ plat->multicast_filter_bins = HASH_TABLE_SIZE; /* Set default value for unicast filter entries */ plat->unicast_filter_entries = 1; /* Set the maxmtu to a default of JUMBO_LEN */ plat->maxmtu = JUMBO_LEN; plat->vlan_fail_q_en = true; /* Use the last Rx queue */ plat->vlan_fail_q = plat->rx_queues_to_use - 1; /* Intel mgbe SGMII interface uses pcs-xcps */ if (plat->phy_interface == PHY_INTERFACE_MODE_SGMII) { plat->mdio_bus_data->has_xpcs = true; plat->mdio_bus_data->xpcs_an_inband = true; } /* Ensure mdio bus scan skips intel serdes and pcs-xpcs */ plat->mdio_bus_data->phy_mask = 1 << INTEL_MGBE_ADHOC_ADDR; plat->mdio_bus_data->phy_mask |= 1 << INTEL_MGBE_XPCS_ADDR; plat->int_snapshot_num = AUX_SNAPSHOT1; plat->ext_snapshot_num = AUX_SNAPSHOT0; plat->has_crossts = true; plat->crosststamp = intel_crosststamp; /* Setup MSI vector offset specific to Intel mGbE controller */ plat->msi_mac_vec = 29; plat->msi_lpi_vec = 28; plat->msi_sfty_ce_vec = 27; plat->msi_sfty_ue_vec = 26; plat->msi_rx_base_vec = 0; plat->msi_tx_base_vec = 1; return 0; } static int ehl_common_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->rx_queues_to_use = 8; plat->tx_queues_to_use = 8; plat->clk_ptp_rate = 200000000; plat->use_phy_wol = 1; plat->safety_feat_cfg->tsoee = 1; plat->safety_feat_cfg->mrxpee = 1; plat->safety_feat_cfg->mestee = 1; plat->safety_feat_cfg->mrxee = 1; plat->safety_feat_cfg->mtxee = 1; plat->safety_feat_cfg->epsi = 0; plat->safety_feat_cfg->edpp = 0; plat->safety_feat_cfg->prtyen = 0; plat->safety_feat_cfg->tmouten = 0; return intel_mgbe_common_data(pdev, plat); } static int ehl_sgmii_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->bus_id = 1; plat->phy_interface = PHY_INTERFACE_MODE_SGMII; plat->speed_mode_2500 = intel_speed_mode_2500; plat->serdes_powerup = intel_serdes_powerup; plat->serdes_powerdown = intel_serdes_powerdown; return ehl_common_data(pdev, plat); } static struct stmmac_pci_info ehl_sgmii1g_info = { .setup = ehl_sgmii_data, }; static int ehl_rgmii_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->bus_id = 1; plat->phy_interface = PHY_INTERFACE_MODE_RGMII; return ehl_common_data(pdev, plat); } static struct stmmac_pci_info ehl_rgmii1g_info = { .setup = ehl_rgmii_data, }; static int ehl_pse0_common_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { struct intel_priv_data *intel_priv = plat->bsp_priv; intel_priv->is_pse = true; plat->bus_id = 2; plat->addr64 = 32; intel_mgbe_pse_crossts_adj(intel_priv, EHL_PSE_ART_MHZ); return ehl_common_data(pdev, plat); } static int ehl_pse0_rgmii1g_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID; return ehl_pse0_common_data(pdev, plat); } static struct stmmac_pci_info ehl_pse0_rgmii1g_info = { .setup = ehl_pse0_rgmii1g_data, }; static int ehl_pse0_sgmii1g_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->phy_interface = PHY_INTERFACE_MODE_SGMII; plat->speed_mode_2500 = intel_speed_mode_2500; plat->serdes_powerup = intel_serdes_powerup; plat->serdes_powerdown = intel_serdes_powerdown; return ehl_pse0_common_data(pdev, plat); } static struct stmmac_pci_info ehl_pse0_sgmii1g_info = { .setup = ehl_pse0_sgmii1g_data, }; static int ehl_pse1_common_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { struct intel_priv_data *intel_priv = plat->bsp_priv; intel_priv->is_pse = true; plat->bus_id = 3; plat->addr64 = 32; intel_mgbe_pse_crossts_adj(intel_priv, EHL_PSE_ART_MHZ); return ehl_common_data(pdev, plat); } static int ehl_pse1_rgmii1g_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID; return ehl_pse1_common_data(pdev, plat); } static struct stmmac_pci_info ehl_pse1_rgmii1g_info = { .setup = ehl_pse1_rgmii1g_data, }; static int ehl_pse1_sgmii1g_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->phy_interface = PHY_INTERFACE_MODE_SGMII; plat->speed_mode_2500 = intel_speed_mode_2500; plat->serdes_powerup = intel_serdes_powerup; plat->serdes_powerdown = intel_serdes_powerdown; return ehl_pse1_common_data(pdev, plat); } static struct stmmac_pci_info ehl_pse1_sgmii1g_info = { .setup = ehl_pse1_sgmii1g_data, }; static int tgl_common_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->rx_queues_to_use = 6; plat->tx_queues_to_use = 4; plat->clk_ptp_rate = 200000000; plat->safety_feat_cfg->tsoee = 1; plat->safety_feat_cfg->mrxpee = 0; plat->safety_feat_cfg->mestee = 1; plat->safety_feat_cfg->mrxee = 1; plat->safety_feat_cfg->mtxee = 1; plat->safety_feat_cfg->epsi = 0; plat->safety_feat_cfg->edpp = 0; plat->safety_feat_cfg->prtyen = 0; plat->safety_feat_cfg->tmouten = 0; return intel_mgbe_common_data(pdev, plat); } static int tgl_sgmii_phy0_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->bus_id = 1; plat->phy_interface = PHY_INTERFACE_MODE_SGMII; plat->speed_mode_2500 = intel_speed_mode_2500; plat->serdes_powerup = intel_serdes_powerup; plat->serdes_powerdown = intel_serdes_powerdown; return tgl_common_data(pdev, plat); } static struct stmmac_pci_info tgl_sgmii1g_phy0_info = { .setup = tgl_sgmii_phy0_data, }; static int tgl_sgmii_phy1_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->bus_id = 2; plat->phy_interface = PHY_INTERFACE_MODE_SGMII; plat->speed_mode_2500 = intel_speed_mode_2500; plat->serdes_powerup = intel_serdes_powerup; plat->serdes_powerdown = intel_serdes_powerdown; return tgl_common_data(pdev, plat); } static struct stmmac_pci_info tgl_sgmii1g_phy1_info = { .setup = tgl_sgmii_phy1_data, }; static int adls_sgmii_phy0_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->bus_id = 1; plat->phy_interface = PHY_INTERFACE_MODE_SGMII; /* SerDes power up and power down are done in BIOS for ADL */ return tgl_common_data(pdev, plat); } static struct stmmac_pci_info adls_sgmii1g_phy0_info = { .setup = adls_sgmii_phy0_data, }; static int adls_sgmii_phy1_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { plat->bus_id = 2; plat->phy_interface = PHY_INTERFACE_MODE_SGMII; /* SerDes power up and power down are done in BIOS for ADL */ return tgl_common_data(pdev, plat); } static struct stmmac_pci_info adls_sgmii1g_phy1_info = { .setup = adls_sgmii_phy1_data, }; static const struct stmmac_pci_func_data galileo_stmmac_func_data[] = { { .func = 6, .phy_addr = 1, }, }; static const struct stmmac_pci_dmi_data galileo_stmmac_dmi_data = { .func = galileo_stmmac_func_data, .nfuncs = ARRAY_SIZE(galileo_stmmac_func_data), }; static const struct stmmac_pci_func_data iot2040_stmmac_func_data[] = { { .func = 6, .phy_addr = 1, }, { .func = 7, .phy_addr = 1, }, }; static const struct stmmac_pci_dmi_data iot2040_stmmac_dmi_data = { .func = iot2040_stmmac_func_data, .nfuncs = ARRAY_SIZE(iot2040_stmmac_func_data), }; static const struct dmi_system_id quark_pci_dmi[] = { { .matches = { DMI_EXACT_MATCH(DMI_BOARD_NAME, "Galileo"), }, .driver_data = (void *)&galileo_stmmac_dmi_data, }, { .matches = { DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"), }, .driver_data = (void *)&galileo_stmmac_dmi_data, }, /* There are 2 types of SIMATIC IOT2000: IOT2020 and IOT2040. * The asset tag "6ES7647-0AA00-0YA2" is only for IOT2020 which * has only one pci network device while other asset tags are * for IOT2040 which has two. */ { .matches = { DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG, "6ES7647-0AA00-0YA2"), }, .driver_data = (void *)&galileo_stmmac_dmi_data, }, { .matches = { DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), }, .driver_data = (void *)&iot2040_stmmac_dmi_data, }, {} }; static int quark_default_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { int ret; /* Set common default data first */ common_default_data(plat); /* Refuse to load the driver and register net device if MAC controller * does not connect to any PHY interface. */ ret = stmmac_pci_find_phy_addr(pdev, quark_pci_dmi); if (ret < 0) { /* Return error to the caller on DMI enabled boards. */ if (dmi_get_system_info(DMI_BOARD_NAME)) return ret; /* Galileo boards with old firmware don't support DMI. We always * use 1 here as PHY address, so at least the first found MAC * controller would be probed. */ ret = 1; } plat->bus_id = pci_dev_id(pdev); plat->phy_addr = ret; plat->phy_interface = PHY_INTERFACE_MODE_RMII; plat->dma_cfg->pbl = 16; plat->dma_cfg->pblx8 = true; plat->dma_cfg->fixed_burst = 1; /* AXI (TODO) */ return 0; } static const struct stmmac_pci_info quark_info = { .setup = quark_default_data, }; static int stmmac_config_single_msi(struct pci_dev *pdev, struct plat_stmmacenet_data *plat, struct stmmac_resources *res) { int ret; ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); if (ret < 0) { dev_info(&pdev->dev, "%s: Single IRQ enablement failed\n", __func__); return ret; } res->irq = pci_irq_vector(pdev, 0); res->wol_irq = res->irq; plat->multi_msi_en = 0; dev_info(&pdev->dev, "%s: Single IRQ enablement successful\n", __func__); return 0; } static int stmmac_config_multi_msi(struct pci_dev *pdev, struct plat_stmmacenet_data *plat, struct stmmac_resources *res) { int ret; int i; if (plat->msi_rx_base_vec >= STMMAC_MSI_VEC_MAX || plat->msi_tx_base_vec >= STMMAC_MSI_VEC_MAX) { dev_info(&pdev->dev, "%s: Invalid RX & TX vector defined\n", __func__); return -1; } ret = pci_alloc_irq_vectors(pdev, 2, STMMAC_MSI_VEC_MAX, PCI_IRQ_MSI | PCI_IRQ_MSIX); if (ret < 0) { dev_info(&pdev->dev, "%s: multi MSI enablement failed\n", __func__); return ret; } /* For RX MSI */ for (i = 0; i < plat->rx_queues_to_use; i++) { res->rx_irq[i] = pci_irq_vector(pdev, plat->msi_rx_base_vec + i * 2); } /* For TX MSI */ for (i = 0; i < plat->tx_queues_to_use; i++) { res->tx_irq[i] = pci_irq_vector(pdev, plat->msi_tx_base_vec + i * 2); } if (plat->msi_mac_vec < STMMAC_MSI_VEC_MAX) res->irq = pci_irq_vector(pdev, plat->msi_mac_vec); if (plat->msi_wol_vec < STMMAC_MSI_VEC_MAX) res->wol_irq = pci_irq_vector(pdev, plat->msi_wol_vec); if (plat->msi_lpi_vec < STMMAC_MSI_VEC_MAX) res->lpi_irq = pci_irq_vector(pdev, plat->msi_lpi_vec); if (plat->msi_sfty_ce_vec < STMMAC_MSI_VEC_MAX) res->sfty_ce_irq = pci_irq_vector(pdev, plat->msi_sfty_ce_vec); if (plat->msi_sfty_ue_vec < STMMAC_MSI_VEC_MAX) res->sfty_ue_irq = pci_irq_vector(pdev, plat->msi_sfty_ue_vec); plat->multi_msi_en = 1; dev_info(&pdev->dev, "%s: multi MSI enablement successful\n", __func__); return 0; } /** * intel_eth_pci_probe * * @pdev: pci device pointer * @id: pointer to table of device id/id's. * * Description: This probing function gets called for all PCI devices which * match the ID table and are not "owned" by other driver yet. This function * gets passed a "struct pci_dev *" for each device whose entry in the ID table * matches the device. The probe functions returns zero when the driver choose * to take "ownership" of the device or an error code(-ve no) otherwise. */ static int intel_eth_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct stmmac_pci_info *info = (struct stmmac_pci_info *)id->driver_data; struct intel_priv_data *intel_priv; struct plat_stmmacenet_data *plat; struct stmmac_resources res; int ret; intel_priv = devm_kzalloc(&pdev->dev, sizeof(*intel_priv), GFP_KERNEL); if (!intel_priv) return -ENOMEM; plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL); if (!plat) return -ENOMEM; plat->mdio_bus_data = devm_kzalloc(&pdev->dev, sizeof(*plat->mdio_bus_data), GFP_KERNEL); if (!plat->mdio_bus_data) return -ENOMEM; plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg), GFP_KERNEL); if (!plat->dma_cfg) return -ENOMEM; plat->safety_feat_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->safety_feat_cfg), GFP_KERNEL); if (!plat->safety_feat_cfg) return -ENOMEM; /* Enable pci device */ ret = pcim_enable_device(pdev); if (ret) { dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n", __func__); return ret; } ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev)); if (ret) return ret; pci_set_master(pdev); plat->bsp_priv = intel_priv; intel_priv->mdio_adhoc_addr = INTEL_MGBE_ADHOC_ADDR; intel_priv->crossts_adj = 1; /* Initialize all MSI vectors to invalid so that it can be set * according to platform data settings below. * Note: MSI vector takes value from 0 upto 31 (STMMAC_MSI_VEC_MAX) */ plat->msi_mac_vec = STMMAC_MSI_VEC_MAX; plat->msi_wol_vec = STMMAC_MSI_VEC_MAX; plat->msi_lpi_vec = STMMAC_MSI_VEC_MAX; plat->msi_sfty_ce_vec = STMMAC_MSI_VEC_MAX; plat->msi_sfty_ue_vec = STMMAC_MSI_VEC_MAX; plat->msi_rx_base_vec = STMMAC_MSI_VEC_MAX; plat->msi_tx_base_vec = STMMAC_MSI_VEC_MAX; ret = info->setup(pdev, plat); if (ret) return ret; memset(&res, 0, sizeof(res)); res.addr = pcim_iomap_table(pdev)[0]; if (plat->eee_usecs_rate > 0) { u32 tx_lpi_usec; tx_lpi_usec = (plat->eee_usecs_rate / 1000000) - 1; writel(tx_lpi_usec, res.addr + GMAC_1US_TIC_COUNTER); } ret = stmmac_config_multi_msi(pdev, plat, &res); if (ret) { ret = stmmac_config_single_msi(pdev, plat, &res); if (ret) { dev_err(&pdev->dev, "%s: ERROR: failed to enable IRQ\n", __func__); goto err_alloc_irq; } } ret = stmmac_dvr_probe(&pdev->dev, plat, &res); if (ret) { goto err_dvr_probe; } return 0; err_dvr_probe: pci_free_irq_vectors(pdev); err_alloc_irq: clk_disable_unprepare(plat->stmmac_clk); clk_unregister_fixed_rate(plat->stmmac_clk); return ret; } /** * intel_eth_pci_remove * * @pdev: pci device pointer * Description: this function calls the main to free the net resources * and releases the PCI resources. */ static void intel_eth_pci_remove(struct pci_dev *pdev) { struct net_device *ndev = dev_get_drvdata(&pdev->dev); struct stmmac_priv *priv = netdev_priv(ndev); stmmac_dvr_remove(&pdev->dev); clk_unregister_fixed_rate(priv->plat->stmmac_clk); pcim_iounmap_regions(pdev, BIT(0)); } static int __maybe_unused intel_eth_pci_suspend(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); int ret; ret = stmmac_suspend(dev); if (ret) return ret; ret = pci_save_state(pdev); if (ret) return ret; pci_wake_from_d3(pdev, true); pci_set_power_state(pdev, PCI_D3hot); return 0; } static int __maybe_unused intel_eth_pci_resume(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); int ret; pci_restore_state(pdev); pci_set_power_state(pdev, PCI_D0); ret = pcim_enable_device(pdev); if (ret) return ret; pci_set_master(pdev); return stmmac_resume(dev); } static SIMPLE_DEV_PM_OPS(intel_eth_pm_ops, intel_eth_pci_suspend, intel_eth_pci_resume); #define PCI_DEVICE_ID_INTEL_QUARK 0x0937 #define PCI_DEVICE_ID_INTEL_EHL_RGMII1G 0x4b30 #define PCI_DEVICE_ID_INTEL_EHL_SGMII1G 0x4b31 #define PCI_DEVICE_ID_INTEL_EHL_SGMII2G5 0x4b32 /* Intel(R) Programmable Services Engine (Intel(R) PSE) consist of 2 MAC * which are named PSE0 and PSE1 */ #define PCI_DEVICE_ID_INTEL_EHL_PSE0_RGMII1G 0x4ba0 #define PCI_DEVICE_ID_INTEL_EHL_PSE0_SGMII1G 0x4ba1 #define PCI_DEVICE_ID_INTEL_EHL_PSE0_SGMII2G5 0x4ba2 #define PCI_DEVICE_ID_INTEL_EHL_PSE1_RGMII1G 0x4bb0 #define PCI_DEVICE_ID_INTEL_EHL_PSE1_SGMII1G 0x4bb1 #define PCI_DEVICE_ID_INTEL_EHL_PSE1_SGMII2G5 0x4bb2 #define PCI_DEVICE_ID_INTEL_TGLH_SGMII1G_0 0x43ac #define PCI_DEVICE_ID_INTEL_TGLH_SGMII1G_1 0x43a2 #define PCI_DEVICE_ID_INTEL_TGL_SGMII1G 0xa0ac #define PCI_DEVICE_ID_INTEL_ADLS_SGMII1G_0 0x7aac #define PCI_DEVICE_ID_INTEL_ADLS_SGMII1G_1 0x7aad static const struct pci_device_id intel_eth_pci_id_table[] = { { PCI_DEVICE_DATA(INTEL, QUARK, &quark_info) }, { PCI_DEVICE_DATA(INTEL, EHL_RGMII1G, &ehl_rgmii1g_info) }, { PCI_DEVICE_DATA(INTEL, EHL_SGMII1G, &ehl_sgmii1g_info) }, { PCI_DEVICE_DATA(INTEL, EHL_SGMII2G5, &ehl_sgmii1g_info) }, { PCI_DEVICE_DATA(INTEL, EHL_PSE0_RGMII1G, &ehl_pse0_rgmii1g_info) }, { PCI_DEVICE_DATA(INTEL, EHL_PSE0_SGMII1G, &ehl_pse0_sgmii1g_info) }, { PCI_DEVICE_DATA(INTEL, EHL_PSE0_SGMII2G5, &ehl_pse0_sgmii1g_info) }, { PCI_DEVICE_DATA(INTEL, EHL_PSE1_RGMII1G, &ehl_pse1_rgmii1g_info) }, { PCI_DEVICE_DATA(INTEL, EHL_PSE1_SGMII1G, &ehl_pse1_sgmii1g_info) }, { PCI_DEVICE_DATA(INTEL, EHL_PSE1_SGMII2G5, &ehl_pse1_sgmii1g_info) }, { PCI_DEVICE_DATA(INTEL, TGL_SGMII1G, &tgl_sgmii1g_phy0_info) }, { PCI_DEVICE_DATA(INTEL, TGLH_SGMII1G_0, &tgl_sgmii1g_phy0_info) }, { PCI_DEVICE_DATA(INTEL, TGLH_SGMII1G_1, &tgl_sgmii1g_phy1_info) }, { PCI_DEVICE_DATA(INTEL, ADLS_SGMII1G_0, &adls_sgmii1g_phy0_info) }, { PCI_DEVICE_DATA(INTEL, ADLS_SGMII1G_1, &adls_sgmii1g_phy1_info) }, {} }; MODULE_DEVICE_TABLE(pci, intel_eth_pci_id_table); static struct pci_driver intel_eth_pci_driver = { .name = "intel-eth-pci", .id_table = intel_eth_pci_id_table, .probe = intel_eth_pci_probe, .remove = intel_eth_pci_remove, .driver = { .pm = &intel_eth_pm_ops, }, }; module_pci_driver(intel_eth_pci_driver); MODULE_DESCRIPTION("INTEL 10/100/1000 Ethernet PCI driver"); MODULE_AUTHOR("Voon Weifeng <weifeng.voon@intel.com>"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1