Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Qing Zhang | 954 | 97.55% | 1 | 25.00% |
Yue haibing | 18 | 1.84% | 1 | 25.00% |
zhao xiao | 5 | 0.51% | 1 | 25.00% |
Dan Carpenter | 1 | 0.10% | 1 | 25.00% |
Total | 978 | 4 |
// SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2020, Loongson Corporation */ #include <linux/clk-provider.h> #include <linux/pci.h> #include <linux/dmi.h> #include <linux/device.h> #include <linux/of_irq.h> #include "stmmac.h" static int loongson_default_data(struct plat_stmmacenet_data *plat) { plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */ plat->has_gmac = 1; plat->force_sf_dma_mode = 1; /* Set default value for multicast hash bins */ plat->multicast_filter_bins = HASH_TABLE_SIZE; /* Set default value for unicast filter entries */ plat->unicast_filter_entries = 1; /* Set the maxmtu to a default of JUMBO_LEN */ plat->maxmtu = JUMBO_LEN; /* Set default number of RX and TX queues to use */ plat->tx_queues_to_use = 1; plat->rx_queues_to_use = 1; /* Disable Priority config by default */ plat->tx_queues_cfg[0].use_prio = false; plat->rx_queues_cfg[0].use_prio = false; /* Disable RX queues routing by default */ plat->rx_queues_cfg[0].pkt_route = 0x0; /* Default to phy auto-detection */ plat->phy_addr = -1; plat->dma_cfg->pbl = 32; plat->dma_cfg->pblx8 = true; plat->multicast_filter_bins = 256; return 0; } static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct plat_stmmacenet_data *plat; struct stmmac_resources res; struct device_node *np; int ret, i, phy_mode; bool mdio = false; np = dev_of_node(&pdev->dev); if (!np) { pr_info("dwmac_loongson_pci: No OF node\n"); return -ENODEV; } if (!of_device_is_compatible(np, "loongson, pci-gmac")) { pr_info("dwmac_loongson_pci: Incompatible OF node\n"); return -ENODEV; } plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL); if (!plat) return -ENOMEM; if (plat->mdio_node) { dev_err(&pdev->dev, "Found MDIO subnode\n"); mdio = true; } if (mdio) { plat->mdio_bus_data = devm_kzalloc(&pdev->dev, sizeof(*plat->mdio_bus_data), GFP_KERNEL); if (!plat->mdio_bus_data) return -ENOMEM; plat->mdio_bus_data->needs_reset = true; } plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg), GFP_KERNEL); if (!plat->dma_cfg) return -ENOMEM; /* Enable pci device */ ret = pci_enable_device(pdev); if (ret) { dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n", __func__); return ret; } /* Get the base address of device */ for (i = 0; i < PCI_STD_NUM_BARS; i++) { if (pci_resource_len(pdev, i) == 0) continue; ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev)); if (ret) return ret; break; } plat->bus_id = of_alias_get_id(np, "ethernet"); if (plat->bus_id < 0) plat->bus_id = pci_dev_id(pdev); phy_mode = device_get_phy_mode(&pdev->dev); if (phy_mode < 0) { dev_err(&pdev->dev, "phy_mode not found\n"); return phy_mode; } plat->phy_interface = phy_mode; plat->interface = PHY_INTERFACE_MODE_GMII; pci_set_master(pdev); loongson_default_data(plat); pci_enable_msi(pdev); memset(&res, 0, sizeof(res)); res.addr = pcim_iomap_table(pdev)[0]; res.irq = of_irq_get_byname(np, "macirq"); if (res.irq < 0) { dev_err(&pdev->dev, "IRQ macirq not found\n"); ret = -ENODEV; } res.wol_irq = of_irq_get_byname(np, "eth_wake_irq"); if (res.wol_irq < 0) { dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n"); res.wol_irq = res.irq; } res.lpi_irq = of_irq_get_byname(np, "eth_lpi"); if (res.lpi_irq < 0) { dev_err(&pdev->dev, "IRQ eth_lpi not found\n"); ret = -ENODEV; } return stmmac_dvr_probe(&pdev->dev, plat, &res); } static void loongson_dwmac_remove(struct pci_dev *pdev) { int i; stmmac_dvr_remove(&pdev->dev); for (i = 0; i < PCI_STD_NUM_BARS; i++) { if (pci_resource_len(pdev, i) == 0) continue; pcim_iounmap_regions(pdev, BIT(i)); break; } pci_disable_device(pdev); } static int __maybe_unused loongson_dwmac_suspend(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); int ret; ret = stmmac_suspend(dev); if (ret) return ret; ret = pci_save_state(pdev); if (ret) return ret; pci_disable_device(pdev); pci_wake_from_d3(pdev, true); return 0; } static int __maybe_unused loongson_dwmac_resume(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); int ret; pci_restore_state(pdev); pci_set_power_state(pdev, PCI_D0); ret = pci_enable_device(pdev); if (ret) return ret; pci_set_master(pdev); return stmmac_resume(dev); } static SIMPLE_DEV_PM_OPS(loongson_dwmac_pm_ops, loongson_dwmac_suspend, loongson_dwmac_resume); static const struct pci_device_id loongson_dwmac_id_table[] = { { PCI_VDEVICE(LOONGSON, 0x7a03) }, {} }; MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table); struct pci_driver loongson_dwmac_driver = { .name = "dwmac-loongson-pci", .id_table = loongson_dwmac_id_table, .probe = loongson_dwmac_probe, .remove = loongson_dwmac_remove, .driver = { .pm = &loongson_dwmac_pm_ops, }, }; module_pci_driver(loongson_dwmac_driver); MODULE_DESCRIPTION("Loongson DWMAC PCI driver"); MODULE_AUTHOR("Qing Zhang <zhangqing@loongson.cn>"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1