Contributors: 4
Author Tokens Token Proportion Commits Commit Proportion
Oleksij Rempel 265 65.27% 1 25.00%
Michael Schmitz 138 33.99% 1 25.00%
Andrew Lunn 2 0.49% 1 25.00%
Heiner Kallweit 1 0.25% 1 25.00%
Total 406 4 


// SPDX-License-Identifier: GPL-2.0+
/* Driver for Asix PHYs
 *
 * Author: Michael Schmitz <schmitzmic@gmail.com>
 */
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/phy.h>

#define PHY_ID_ASIX_AX88772A		0x003b1861
#define PHY_ID_ASIX_AX88772C		0x003b1881
#define PHY_ID_ASIX_AX88796B		0x003b1841

MODULE_DESCRIPTION("Asix PHY driver");
MODULE_AUTHOR("Michael Schmitz <schmitzmic@gmail.com>");
MODULE_LICENSE("GPL");

/**
 * asix_soft_reset - software reset the PHY via BMCR_RESET bit
 * @phydev: target phy_device struct
 *
 * Description: Perform a software PHY reset using the standard
 * BMCR_RESET bit and poll for the reset bit to be cleared.
 * Toggle BMCR_RESET bit off to accommodate broken AX8796B PHY implementation
 * such as used on the Individual Computers' X-Surf 100 Zorro card.
 *
 * Returns: 0 on success, < 0 on failure
 */
static int asix_soft_reset(struct phy_device *phydev)
{
	int ret;

	/* Asix PHY won't reset unless reset bit toggles */
	ret = phy_write(phydev, MII_BMCR, 0);
	if (ret < 0)
		return ret;

	return genphy_soft_reset(phydev);
}

/* AX88772A is not working properly with some old switches (NETGEAR EN 108TP):
 * after autoneg is done and the link status is reported as active, the MII_LPA
 * register is 0. This issue is not reproducible on AX88772C.
 */
static int asix_ax88772a_read_status(struct phy_device *phydev)
{
	int ret, val;

	ret = genphy_update_link(phydev);
	if (ret)
		return ret;

	if (!phydev->link)
		return 0;

	/* If MII_LPA is 0, phy_resolve_aneg_linkmode() will fail to resolve
	 * linkmode so use MII_BMCR as default values.
	 */
	val = phy_read(phydev, MII_BMCR);
	if (val < 0)
		return val;

	if (val & BMCR_SPEED100)
		phydev->speed = SPEED_100;
	else
		phydev->speed = SPEED_10;

	if (val & BMCR_FULLDPLX)
		phydev->duplex = DUPLEX_FULL;
	else
		phydev->duplex = DUPLEX_HALF;

	ret = genphy_read_lpa(phydev);
	if (ret < 0)
		return ret;

	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete)
		phy_resolve_aneg_linkmode(phydev);

	return 0;
}

static void asix_ax88772a_link_change_notify(struct phy_device *phydev)
{
	/* Reset PHY, otherwise MII_LPA will provide outdated information.
	 * This issue is reproducible only with some link partner PHYs
	 */
	if (phydev->state == PHY_NOLINK && phydev->drv->soft_reset)
		phydev->drv->soft_reset(phydev);
}

static struct phy_driver asix_driver[] = {
{
	PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772A),
	.name		= "Asix Electronics AX88772A",
	.flags		= PHY_IS_INTERNAL,
	.read_status	= asix_ax88772a_read_status,
	.suspend	= genphy_suspend,
	.resume		= genphy_resume,
	.soft_reset	= asix_soft_reset,
	.link_change_notify	= asix_ax88772a_link_change_notify,
}, {
	PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772C),
	.name		= "Asix Electronics AX88772C",
	.flags		= PHY_IS_INTERNAL,
	.suspend	= genphy_suspend,
	.resume		= genphy_resume,
	.soft_reset	= asix_soft_reset,
}, {
	.phy_id		= PHY_ID_ASIX_AX88796B,
	.name		= "Asix Electronics AX88796B",
	.phy_id_mask	= 0xfffffff0,
	/* PHY_BASIC_FEATURES */
	.soft_reset	= asix_soft_reset,
} };

module_phy_driver(asix_driver);

static struct mdio_device_id __maybe_unused asix_tbl[] = {
	{ PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772A) },
	{ PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772C) },
	{ PHY_ID_ASIX_AX88796B, 0xfffffff0 },
	{ }
};

MODULE_DEVICE_TABLE(mdio, asix_tbl);