| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Larry Finger | 703 | 99.43% | 1 | 33.33% |
| Thomas Gleixner | 2 | 0.28% | 1 | 33.33% |
| Michael Buesch | 2 | 0.28% | 1 | 33.33% |
| Total | 707 | 3 |
/* SPDX-License-Identifier: GPL-2.0-or-later */ /* Broadcom B43legacy wireless driver Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, Stefano Brivio <stefano.brivio@polimi.it> Michael Buesch <m@bues.ch> Danny van Dyk <kugelfang@gentoo.org> Andreas Jaggi <andreas.jaggi@waterwave.ch> Copyright (c) 2007 Larry Finger <Larry.Finger@lwfinger.net> Some parts of the code in this file are derived from the ipw2200 driver Copyright(c) 2003 - 2004 Intel Corporation. */ #ifndef B43legacy_PHY_H_ #define B43legacy_PHY_H_ #include <linux/types.h> enum { B43legacy_ANTENNA0, /* Antenna 0 */ B43legacy_ANTENNA1, /* Antenna 0 */ B43legacy_ANTENNA_AUTO1, /* Automatic, starting with antenna 1 */ B43legacy_ANTENNA_AUTO0, /* Automatic, starting with antenna 0 */ B43legacy_ANTENNA_AUTO = B43legacy_ANTENNA_AUTO0, B43legacy_ANTENNA_DEFAULT = B43legacy_ANTENNA_AUTO, }; enum { B43legacy_INTERFMODE_NONE, B43legacy_INTERFMODE_NONWLAN, B43legacy_INTERFMODE_MANUALWLAN, B43legacy_INTERFMODE_AUTOWLAN, }; /*** PHY Registers ***/ /* Routing */ #define B43legacy_PHYROUTE_OFDM_GPHY 0x400 #define B43legacy_PHYROUTE_EXT_GPHY 0x800 /* Base registers. */ #define B43legacy_PHY_BASE(reg) (reg) /* OFDM (A) registers of a G-PHY */ #define B43legacy_PHY_OFDM(reg) ((reg) | B43legacy_PHYROUTE_OFDM_GPHY) /* Extended G-PHY registers */ #define B43legacy_PHY_EXTG(reg) ((reg) | B43legacy_PHYROUTE_EXT_GPHY) /* Extended G-PHY Registers */ #define B43legacy_PHY_CLASSCTL B43legacy_PHY_EXTG(0x02) /* Classify control */ #define B43legacy_PHY_GTABCTL B43legacy_PHY_EXTG(0x03) /* G-PHY table control (see below) */ #define B43legacy_PHY_GTABOFF 0x03FF /* G-PHY table offset (see below) */ #define B43legacy_PHY_GTABNR 0xFC00 /* G-PHY table number (see below) */ #define B43legacy_PHY_GTABNR_SHIFT 10 #define B43legacy_PHY_GTABDATA B43legacy_PHY_EXTG(0x04) /* G-PHY table data */ #define B43legacy_PHY_LO_MASK B43legacy_PHY_EXTG(0x0F) /* Local Oscillator control mask */ #define B43legacy_PHY_LO_CTL B43legacy_PHY_EXTG(0x10) /* Local Oscillator control */ #define B43legacy_PHY_RFOVER B43legacy_PHY_EXTG(0x11) /* RF override */ #define B43legacy_PHY_RFOVERVAL B43legacy_PHY_EXTG(0x12) /* RF override value */ /*** OFDM table numbers ***/ #define B43legacy_OFDMTAB(number, offset) \ (((number) << B43legacy_PHY_OTABLENR_SHIFT) \ | (offset)) #define B43legacy_OFDMTAB_AGC1 B43legacy_OFDMTAB(0x00, 0) #define B43legacy_OFDMTAB_GAIN0 B43legacy_OFDMTAB(0x00, 0) #define B43legacy_OFDMTAB_GAINX B43legacy_OFDMTAB(0x01, 0) #define B43legacy_OFDMTAB_GAIN1 B43legacy_OFDMTAB(0x01, 4) #define B43legacy_OFDMTAB_AGC3 B43legacy_OFDMTAB(0x02, 0) #define B43legacy_OFDMTAB_GAIN2 B43legacy_OFDMTAB(0x02, 3) #define B43legacy_OFDMTAB_LNAHPFGAIN1 B43legacy_OFDMTAB(0x03, 0) #define B43legacy_OFDMTAB_WRSSI B43legacy_OFDMTAB(0x04, 0) #define B43legacy_OFDMTAB_LNAHPFGAIN2 B43legacy_OFDMTAB(0x04, 0) #define B43legacy_OFDMTAB_NOISESCALE B43legacy_OFDMTAB(0x05, 0) #define B43legacy_OFDMTAB_AGC2 B43legacy_OFDMTAB(0x06, 0) #define B43legacy_OFDMTAB_ROTOR B43legacy_OFDMTAB(0x08, 0) #define B43legacy_OFDMTAB_ADVRETARD B43legacy_OFDMTAB(0x09, 0) #define B43legacy_OFDMTAB_DAC B43legacy_OFDMTAB(0x0C, 0) #define B43legacy_OFDMTAB_DC B43legacy_OFDMTAB(0x0E, 7) #define B43legacy_OFDMTAB_PWRDYN2 B43legacy_OFDMTAB(0x0E, 12) #define B43legacy_OFDMTAB_LNAGAIN B43legacy_OFDMTAB(0x0E, 13) #define B43legacy_OFDMTAB_LPFGAIN B43legacy_OFDMTAB(0x0F, 12) #define B43legacy_OFDMTAB_RSSI B43legacy_OFDMTAB(0x10, 0) #define B43legacy_OFDMTAB_AGC1_R1 B43legacy_OFDMTAB(0x13, 0) #define B43legacy_OFDMTAB_GAINX_R1 B43legacy_OFDMTAB(0x14, 0) #define B43legacy_OFDMTAB_MINSIGSQ B43legacy_OFDMTAB(0x14, 1) #define B43legacy_OFDMTAB_AGC3_R1 B43legacy_OFDMTAB(0x15, 0) #define B43legacy_OFDMTAB_WRSSI_R1 B43legacy_OFDMTAB(0x15, 4) #define B43legacy_OFDMTAB_TSSI B43legacy_OFDMTAB(0x15, 0) #define B43legacy_OFDMTAB_DACRFPABB B43legacy_OFDMTAB(0x16, 0) #define B43legacy_OFDMTAB_DACOFF B43legacy_OFDMTAB(0x17, 0) #define B43legacy_OFDMTAB_DCBIAS B43legacy_OFDMTAB(0x18, 0) void b43legacy_put_attenuation_into_ranges(int *_bbatt, int *_rfatt); /* OFDM (A) PHY Registers */ #define B43legacy_PHY_VERSION_OFDM B43legacy_PHY_OFDM(0x00) /* Versioning register for A-PHY */ #define B43legacy_PHY_BBANDCFG B43legacy_PHY_OFDM(0x01) /* Baseband config */ #define B43legacy_PHY_BBANDCFG_RXANT 0x180 /* RX Antenna selection */ #define B43legacy_PHY_BBANDCFG_RXANT_SHIFT 7 #define B43legacy_PHY_PWRDOWN B43legacy_PHY_OFDM(0x03) /* Powerdown */ #define B43legacy_PHY_CRSTHRES1 B43legacy_PHY_OFDM(0x06) /* CRS Threshold 1 */ #define B43legacy_PHY_LNAHPFCTL B43legacy_PHY_OFDM(0x1C) /* LNA/HPF control */ #define B43legacy_PHY_ADIVRELATED B43legacy_PHY_OFDM(0x27) /* FIXME rename */ #define B43legacy_PHY_CRS0 B43legacy_PHY_OFDM(0x29) #define B43legacy_PHY_ANTDWELL B43legacy_PHY_OFDM(0x2B) /* Antenna dwell */ #define B43legacy_PHY_ANTDWELL_AUTODIV1 0x0100 /* Automatic RX diversity start antenna */ #define B43legacy_PHY_ENCORE B43legacy_PHY_OFDM(0x49) /* "Encore" (RangeMax / BroadRange) */ #define B43legacy_PHY_ENCORE_EN 0x0200 /* Encore enable */ #define B43legacy_PHY_LMS B43legacy_PHY_OFDM(0x55) #define B43legacy_PHY_OFDM61 B43legacy_PHY_OFDM(0x61) /* FIXME rename */ #define B43legacy_PHY_OFDM61_10 0x0010 /* FIXME rename */ #define B43legacy_PHY_IQBAL B43legacy_PHY_OFDM(0x69) /* I/Q balance */ #define B43legacy_PHY_OTABLECTL B43legacy_PHY_OFDM(0x72) /* OFDM table control (see below) */ #define B43legacy_PHY_OTABLEOFF 0x03FF /* OFDM table offset (see below) */ #define B43legacy_PHY_OTABLENR 0xFC00 /* OFDM table number (see below) */ #define B43legacy_PHY_OTABLENR_SHIFT 10 #define B43legacy_PHY_OTABLEI B43legacy_PHY_OFDM(0x73) /* OFDM table data I */ #define B43legacy_PHY_OTABLEQ B43legacy_PHY_OFDM(0x74) /* OFDM table data Q */ #define B43legacy_PHY_HPWR_TSSICTL B43legacy_PHY_OFDM(0x78) /* Hardware power TSSI control */ #define B43legacy_PHY_NRSSITHRES B43legacy_PHY_OFDM(0x8A) /* NRSSI threshold */ #define B43legacy_PHY_ANTWRSETT B43legacy_PHY_OFDM(0x8C) /* Antenna WR settle */ #define B43legacy_PHY_ANTWRSETT_ARXDIV 0x2000 /* Automatic RX diversity enabled */ #define B43legacy_PHY_CLIPPWRDOWNT B43legacy_PHY_OFDM(0x93) /* Clip powerdown threshold */ #define B43legacy_PHY_OFDM9B B43legacy_PHY_OFDM(0x9B) /* FIXME rename */ #define B43legacy_PHY_N1P1GAIN B43legacy_PHY_OFDM(0xA0) #define B43legacy_PHY_P1P2GAIN B43legacy_PHY_OFDM(0xA1) #define B43legacy_PHY_N1N2GAIN B43legacy_PHY_OFDM(0xA2) #define B43legacy_PHY_CLIPTHRES B43legacy_PHY_OFDM(0xA3) #define B43legacy_PHY_CLIPN1P2THRES B43legacy_PHY_OFDM(0xA4) #define B43legacy_PHY_DIVSRCHIDX B43legacy_PHY_OFDM(0xA8) /* Divider search gain/index */ #define B43legacy_PHY_CLIPP2THRES B43legacy_PHY_OFDM(0xA9) #define B43legacy_PHY_CLIPP3THRES B43legacy_PHY_OFDM(0xAA) #define B43legacy_PHY_DIVP1P2GAIN B43legacy_PHY_OFDM(0xAB) #define B43legacy_PHY_DIVSRCHGAINBACK B43legacy_PHY_OFDM(0xAD) /* Divider search gain back */ #define B43legacy_PHY_DIVSRCHGAINCHNG B43legacy_PHY_OFDM(0xAE) /* Divider search gain change */ #define B43legacy_PHY_CRSTHRES1_R1 B43legacy_PHY_OFDM(0xC0) /* CRS Threshold 1 (rev 1 only) */ #define B43legacy_PHY_CRSTHRES2_R1 B43legacy_PHY_OFDM(0xC1) /* CRS Threshold 2 (rev 1 only) */ #define B43legacy_PHY_TSSIP_LTBASE B43legacy_PHY_OFDM(0x380) /* TSSI power lookup table base */ #define B43legacy_PHY_DC_LTBASE B43legacy_PHY_OFDM(0x3A0) /* DC lookup table base */ #define B43legacy_PHY_GAIN_LTBASE B43legacy_PHY_OFDM(0x3C0) /* Gain lookup table base */ void b43legacy_put_attenuation_into_ranges(int *_bbatt, int *_rfatt); /* Masks for the different PHY versioning registers. */ #define B43legacy_PHYVER_ANALOG 0xF000 #define B43legacy_PHYVER_ANALOG_SHIFT 12 #define B43legacy_PHYVER_TYPE 0x0F00 #define B43legacy_PHYVER_TYPE_SHIFT 8 #define B43legacy_PHYVER_VERSION 0x00FF struct b43legacy_wldev; void b43legacy_phy_lock(struct b43legacy_wldev *dev); void b43legacy_phy_unlock(struct b43legacy_wldev *dev); /* Card uses the loopback gain stuff */ #define has_loopback_gain(phy) \ (((phy)->rev > 1) || ((phy)->gmode)) u16 b43legacy_phy_read(struct b43legacy_wldev *dev, u16 offset); void b43legacy_phy_write(struct b43legacy_wldev *dev, u16 offset, u16 val); int b43legacy_phy_init_tssi2dbm_table(struct b43legacy_wldev *dev); int b43legacy_phy_init(struct b43legacy_wldev *dev); void b43legacy_set_rx_antenna(struct b43legacy_wldev *dev, int antenna); void b43legacy_phy_set_antenna_diversity(struct b43legacy_wldev *dev); void b43legacy_phy_calibrate(struct b43legacy_wldev *dev); int b43legacy_phy_connect(struct b43legacy_wldev *dev, int connect); void b43legacy_phy_lo_b_measure(struct b43legacy_wldev *dev); void b43legacy_phy_lo_g_measure(struct b43legacy_wldev *dev); void b43legacy_phy_xmitpower(struct b43legacy_wldev *dev); /* Adjust the LocalOscillator to the saved values. * "fixed" is only set to 1 once in initialization. Set to 0 otherwise. */ void b43legacy_phy_lo_adjust(struct b43legacy_wldev *dev, int fixed); void b43legacy_phy_lo_mark_all_unused(struct b43legacy_wldev *dev); void b43legacy_phy_set_baseband_attenuation(struct b43legacy_wldev *dev, u16 baseband_attenuation); void b43legacy_power_saving_ctl_bits(struct b43legacy_wldev *dev, int bit25, int bit26); #endif /* B43legacy_PHY_H_ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1