Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Johannes Berg | 245 | 85.66% | 2 | 66.67% |
Gil Adam | 41 | 14.34% | 1 | 33.33% |
Total | 286 | 3 |
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* * Copyright (C) 2012-2014, 2018-2019 Intel Corporation * Copyright (C) 2013-2015 Intel Mobile Communications GmbH * Copyright (C) 2016-2017 Intel Deutschland GmbH */ #ifndef __iwl_fw_api_config_h__ #define __iwl_fw_api_config_h__ /* * struct iwl_dqa_enable_cmd * @cmd_queue: the TXQ number of the command queue */ struct iwl_dqa_enable_cmd { __le32 cmd_queue; } __packed; /* DQA_CONTROL_CMD_API_S_VER_1 */ /* * struct iwl_tx_ant_cfg_cmd * @valid: valid antenna configuration */ struct iwl_tx_ant_cfg_cmd { __le32 valid; } __packed; /** * struct iwl_calib_ctrl - Calibration control struct. * Sent as part of the phy configuration command. * @flow_trigger: bitmap for which calibrations to perform according to * flow triggers, using &enum iwl_calib_cfg * @event_trigger: bitmap for which calibrations to perform according to * event triggers, using &enum iwl_calib_cfg */ struct iwl_calib_ctrl { __le32 flow_trigger; __le32 event_trigger; } __packed; /* This enum defines the bitmap of various calibrations to enable in both * init ucode and runtime ucode through CALIBRATION_CFG_CMD. */ enum iwl_calib_cfg { IWL_CALIB_CFG_XTAL_IDX = BIT(0), IWL_CALIB_CFG_TEMPERATURE_IDX = BIT(1), IWL_CALIB_CFG_VOLTAGE_READ_IDX = BIT(2), IWL_CALIB_CFG_PAPD_IDX = BIT(3), IWL_CALIB_CFG_TX_PWR_IDX = BIT(4), IWL_CALIB_CFG_DC_IDX = BIT(5), IWL_CALIB_CFG_BB_FILTER_IDX = BIT(6), IWL_CALIB_CFG_LO_LEAKAGE_IDX = BIT(7), IWL_CALIB_CFG_TX_IQ_IDX = BIT(8), IWL_CALIB_CFG_TX_IQ_SKEW_IDX = BIT(9), IWL_CALIB_CFG_RX_IQ_IDX = BIT(10), IWL_CALIB_CFG_RX_IQ_SKEW_IDX = BIT(11), IWL_CALIB_CFG_SENSITIVITY_IDX = BIT(12), IWL_CALIB_CFG_CHAIN_NOISE_IDX = BIT(13), IWL_CALIB_CFG_DISCONNECTED_ANT_IDX = BIT(14), IWL_CALIB_CFG_ANT_COUPLING_IDX = BIT(15), IWL_CALIB_CFG_DAC_IDX = BIT(16), IWL_CALIB_CFG_ABS_IDX = BIT(17), IWL_CALIB_CFG_AGC_IDX = BIT(18), }; /** * struct iwl_phy_specific_cfg - specific PHY filter configuration * * Sent as part of the phy configuration command (v3) to configure specific FW * defined PHY filters that can be applied to each antenna. * * @filter_cfg_chain_a: filter config id for LMAC1 chain A * @filter_cfg_chain_b: filter config id for LMAC1 chain B * @filter_cfg_chain_c: filter config id for LMAC2 chain A * @filter_cfg_chain_d: filter config id for LMAC2 chain B * values: 0 - no filter; 0xffffffff - reserved; otherwise - filter id */ struct iwl_phy_specific_cfg { __le32 filter_cfg_chain_a; __le32 filter_cfg_chain_b; __le32 filter_cfg_chain_c; __le32 filter_cfg_chain_d; } __packed; /* PHY_SPECIFIC_CONFIGURATION_API_VER_1*/ /** * struct iwl_phy_cfg_cmd - Phy configuration command * * @phy_cfg: PHY configuration value, uses &enum iwl_fw_phy_cfg * @calib_control: calibration control data */ struct iwl_phy_cfg_cmd_v1 { __le32 phy_cfg; struct iwl_calib_ctrl calib_control; } __packed; /** * struct iwl_phy_cfg_cmd_v3 - Phy configuration command (v3) * * @phy_cfg: PHY configuration value, uses &enum iwl_fw_phy_cfg * @calib_control: calibration control data * @phy_specific_cfg: configure predefined PHY filters */ struct iwl_phy_cfg_cmd_v3 { __le32 phy_cfg; struct iwl_calib_ctrl calib_control; struct iwl_phy_specific_cfg phy_specific_cfg; } __packed; /* PHY_CONFIGURATION_CMD_API_S_VER_3 */ /* * enum iwl_dc2dc_config_id - flag ids * * Ids of dc2dc configuration flags */ enum iwl_dc2dc_config_id { DCDC_LOW_POWER_MODE_MSK_SET = 0x1, /* not used */ DCDC_FREQ_TUNE_SET = 0x2, }; /* MARKER_ID_API_E_VER_1 */ /** * struct iwl_dc2dc_config_cmd - configure dc2dc values * * (DC2DC_CONFIG_CMD = 0x83) * * Set/Get & configure dc2dc values. * The command always returns the current dc2dc values. * * @flags: set/get dc2dc * @enable_low_power_mode: not used. * @dc2dc_freq_tune0: frequency divider - digital domain * @dc2dc_freq_tune1: frequency divider - analog domain */ struct iwl_dc2dc_config_cmd { __le32 flags; __le32 enable_low_power_mode; /* not used */ __le32 dc2dc_freq_tune0; __le32 dc2dc_freq_tune1; } __packed; /* DC2DC_CONFIG_CMD_API_S_VER_1 */ /** * struct iwl_dc2dc_config_resp - response for iwl_dc2dc_config_cmd * * Current dc2dc values returned by the FW. * * @dc2dc_freq_tune0: frequency divider - digital domain * @dc2dc_freq_tune1: frequency divider - analog domain */ struct iwl_dc2dc_config_resp { __le32 dc2dc_freq_tune0; __le32 dc2dc_freq_tune1; } __packed; /* DC2DC_CONFIG_RESP_API_S_VER_1 */ #endif /* __iwl_fw_api_config_h__ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1