Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Johannes Berg | 261 | 94.22% | 2 | 50.00% |
Gil Adam | 16 | 5.78% | 2 | 50.00% |
Total | 277 | 4 |
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* * Copyright (C) 2012-2014, 2019-2020 Intel Corporation * Copyright (C) 2013-2015 Intel Mobile Communications GmbH * Copyright (C) 2016-2017 Intel Deutschland GmbH */ #ifndef __iwl_fw_api_phy_h__ #define __iwl_fw_api_phy_h__ /** * enum iwl_phy_ops_subcmd_ids - PHY group commands */ enum iwl_phy_ops_subcmd_ids { /** * @CMD_DTS_MEASUREMENT_TRIGGER_WIDE: * Uses either &struct iwl_dts_measurement_cmd or * &struct iwl_ext_dts_measurement_cmd */ CMD_DTS_MEASUREMENT_TRIGGER_WIDE = 0x0, /** * @CTDP_CONFIG_CMD: &struct iwl_mvm_ctdp_cmd */ CTDP_CONFIG_CMD = 0x03, /** * @TEMP_REPORTING_THRESHOLDS_CMD: &struct temp_report_ths_cmd */ TEMP_REPORTING_THRESHOLDS_CMD = 0x04, /** * @GEO_TX_POWER_LIMIT: &struct iwl_geo_tx_power_profiles_cmd */ GEO_TX_POWER_LIMIT = 0x05, /** * @PER_PLATFORM_ANT_GAIN_CMD: &struct iwl_ppag_table_cmd */ PER_PLATFORM_ANT_GAIN_CMD = 0x07, /** * @CT_KILL_NOTIFICATION: &struct ct_kill_notif */ CT_KILL_NOTIFICATION = 0xFE, /** * @DTS_MEASUREMENT_NOTIF_WIDE: * &struct iwl_dts_measurement_notif_v1 or * &struct iwl_dts_measurement_notif_v2 */ DTS_MEASUREMENT_NOTIF_WIDE = 0xFF, }; /* DTS measurements */ enum iwl_dts_measurement_flags { DTS_TRIGGER_CMD_FLAGS_TEMP = BIT(0), DTS_TRIGGER_CMD_FLAGS_VOLT = BIT(1), }; /** * struct iwl_dts_measurement_cmd - request DTS temp and/or voltage measurements * * @flags: indicates which measurements we want as specified in * &enum iwl_dts_measurement_flags */ struct iwl_dts_measurement_cmd { __le32 flags; } __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_CMD_S */ /** * enum iwl_dts_control_measurement_mode - DTS measurement type * @DTS_AUTOMATIC: Automatic mode (full SW control). Provide temperature read * back (latest value. Not waiting for new value). Use automatic * SW DTS configuration. * @DTS_REQUEST_READ: Request DTS read. Configure DTS with manual settings, * trigger DTS reading and provide read back temperature read * when available. * @DTS_OVER_WRITE: over-write the DTS temperatures in the SW until next read * @DTS_DIRECT_WITHOUT_MEASURE: DTS returns its latest temperature result, * without measurement trigger. */ enum iwl_dts_control_measurement_mode { DTS_AUTOMATIC = 0, DTS_REQUEST_READ = 1, DTS_OVER_WRITE = 2, DTS_DIRECT_WITHOUT_MEASURE = 3, }; /** * enum iwl_dts_used - DTS to use or used for measurement in the DTS request * @DTS_USE_TOP: Top * @DTS_USE_CHAIN_A: chain A * @DTS_USE_CHAIN_B: chain B * @DTS_USE_CHAIN_C: chain C * @XTAL_TEMPERATURE: read temperature from xtal */ enum iwl_dts_used { DTS_USE_TOP = 0, DTS_USE_CHAIN_A = 1, DTS_USE_CHAIN_B = 2, DTS_USE_CHAIN_C = 3, XTAL_TEMPERATURE = 4, }; /** * enum iwl_dts_bit_mode - bit-mode to use in DTS request read mode * @DTS_BIT6_MODE: bit 6 mode * @DTS_BIT8_MODE: bit 8 mode */ enum iwl_dts_bit_mode { DTS_BIT6_MODE = 0, DTS_BIT8_MODE = 1, }; /** * struct iwl_ext_dts_measurement_cmd - request extended DTS temp measurements * @control_mode: see &enum iwl_dts_control_measurement_mode * @temperature: used when over write DTS mode is selected * @sensor: set temperature sensor to use. See &enum iwl_dts_used * @avg_factor: average factor to DTS in request DTS read mode * @bit_mode: value defines the DTS bit mode to use. See &enum iwl_dts_bit_mode * @step_duration: step duration for the DTS */ struct iwl_ext_dts_measurement_cmd { __le32 control_mode; __le32 temperature; __le32 sensor; __le32 avg_factor; __le32 bit_mode; __le32 step_duration; } __packed; /* XVT_FW_DTS_CONTROL_MEASUREMENT_REQUEST_API_S */ /** * struct iwl_dts_measurement_notif_v1 - measurements notification * * @temp: the measured temperature * @voltage: the measured voltage */ struct iwl_dts_measurement_notif_v1 { __le32 temp; __le32 voltage; } __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_1*/ /** * struct iwl_dts_measurement_notif_v2 - measurements notification * * @temp: the measured temperature * @voltage: the measured voltage * @threshold_idx: the trip index that was crossed */ struct iwl_dts_measurement_notif_v2 { __le32 temp; __le32 voltage; __le32 threshold_idx; } __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_2 */ /** * struct iwl_dts_measurement_resp - measurements response * * @temp: the measured temperature */ struct iwl_dts_measurement_resp { __le32 temp; } __packed; /* CMD_DTS_MEASUREMENT_RSP_API_S_VER_1 */ /** * struct ct_kill_notif - CT-kill entry notification * * @temperature: the current temperature in celsius * @reserved: reserved */ struct ct_kill_notif { __le16 temperature; __le16 reserved; } __packed; /* GRP_PHY_CT_KILL_NTF */ /** * enum ctdp_cmd_operation - CTDP command operations * @CTDP_CMD_OPERATION_START: update the current budget * @CTDP_CMD_OPERATION_STOP: stop ctdp * @CTDP_CMD_OPERATION_REPORT: get the average budget */ enum iwl_mvm_ctdp_cmd_operation { CTDP_CMD_OPERATION_START = 0x1, CTDP_CMD_OPERATION_STOP = 0x2, CTDP_CMD_OPERATION_REPORT = 0x4, };/* CTDP_CMD_OPERATION_TYPE_E */ /** * struct iwl_mvm_ctdp_cmd - track and manage the FW power consumption budget * * @operation: see &enum iwl_mvm_ctdp_cmd_operation * @budget: the budget in milliwatt * @window_size: defined in API but not used */ struct iwl_mvm_ctdp_cmd { __le32 operation; __le32 budget; __le32 window_size; } __packed; #define IWL_MAX_DTS_TRIPS 8 /** * struct temp_report_ths_cmd - set temperature thresholds * * @num_temps: number of temperature thresholds passed * @thresholds: array with the thresholds to be configured */ struct temp_report_ths_cmd { __le32 num_temps; __le16 thresholds[IWL_MAX_DTS_TRIPS]; } __packed; /* GRP_PHY_TEMP_REPORTING_THRESHOLDS_CMD */ #endif /* __iwl_fw_api_phy_h__ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1