| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Florian Fainelli | 1451 | 39.06% | 7 | 33.33% |
| Brian Norris | 762 | 20.51% | 1 | 4.76% |
| Anup Patel | 668 | 17.98% | 2 | 9.52% |
| Yendapally Reddy Dhananjaya Reddy | 376 | 10.12% | 1 | 4.76% |
| Srinath Mannam <srinath.mannam@broadcom.com> | 318 | 8.56% | 1 | 4.76% |
| Jaedon Shin | 92 | 2.48% | 2 | 9.52% |
| Julia Lawall | 36 | 0.97% | 1 | 4.76% |
| Chunfeng Yun | 6 | 0.16% | 1 | 4.76% |
| Axel Lin | 2 | 0.05% | 2 | 9.52% |
| Thomas Gleixner | 2 | 0.05% | 1 | 4.76% |
| Dan Carpenter | 1 | 0.03% | 1 | 4.76% |
| Rob Herring | 1 | 0.03% | 1 | 4.76% |
| Total | 3715 | 21 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Broadcom SATA3 AHCI Controller PHY Driver * * Copyright (C) 2016 Broadcom */ #include <linux/delay.h> #include <linux/device.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> #define SATA_PCB_BANK_OFFSET 0x23c #define SATA_PCB_REG_OFFSET(ofs) ((ofs) * 4) #define MAX_PORTS 2 /* Register offset between PHYs in PCB space */ #define SATA_PCB_REG_28NM_SPACE_SIZE 0x1000 /* The older SATA PHY registers duplicated per port registers within the map, * rather than having a separate map per port. */ #define SATA_PCB_REG_40NM_SPACE_SIZE 0x10 /* Register offset between PHYs in PHY control space */ #define SATA_PHY_CTRL_REG_28NM_SPACE_SIZE 0x8 enum brcm_sata_phy_version { BRCM_SATA_PHY_STB_16NM, BRCM_SATA_PHY_STB_28NM, BRCM_SATA_PHY_STB_40NM, BRCM_SATA_PHY_IPROC_NS2, BRCM_SATA_PHY_IPROC_NSP, BRCM_SATA_PHY_IPROC_SR, BRCM_SATA_PHY_DSL_28NM, }; enum brcm_sata_phy_rxaeq_mode { RXAEQ_MODE_OFF = 0, RXAEQ_MODE_AUTO, RXAEQ_MODE_MANUAL, }; static enum brcm_sata_phy_rxaeq_mode rxaeq_to_val(const char *m) { if (!strcmp(m, "auto")) return RXAEQ_MODE_AUTO; else if (!strcmp(m, "manual")) return RXAEQ_MODE_MANUAL; else return RXAEQ_MODE_OFF; } struct brcm_sata_port { int portnum; struct phy *phy; struct brcm_sata_phy *phy_priv; bool ssc_en; enum brcm_sata_phy_rxaeq_mode rxaeq_mode; u32 rxaeq_val; u32 tx_amplitude_val; }; struct brcm_sata_phy { struct device *dev; void __iomem *phy_base; void __iomem *ctrl_base; enum brcm_sata_phy_version version; struct brcm_sata_port phys[MAX_PORTS]; }; enum sata_phy_regs { BLOCK0_REG_BANK = 0x000, BLOCK0_XGXSSTATUS = 0x81, BLOCK0_XGXSSTATUS_PLL_LOCK = BIT(12), BLOCK0_SPARE = 0x8d, BLOCK0_SPARE_OOB_CLK_SEL_MASK = 0x3, BLOCK0_SPARE_OOB_CLK_SEL_REFBY2 = 0x1, BLOCK1_REG_BANK = 0x10, BLOCK1_TEST_TX = 0x83, BLOCK1_TEST_TX_AMP_SHIFT = 12, PLL_REG_BANK_0 = 0x050, PLL_REG_BANK_0_PLLCONTROL_0 = 0x81, PLLCONTROL_0_FREQ_DET_RESTART = BIT(13), PLLCONTROL_0_FREQ_MONITOR = BIT(12), PLLCONTROL_0_SEQ_START = BIT(15), PLL_CAP_CHARGE_TIME = 0x83, PLL_VCO_CAL_THRESH = 0x84, PLL_CAP_CONTROL = 0x85, PLL_FREQ_DET_TIME = 0x86, PLL_ACTRL2 = 0x8b, PLL_ACTRL2_SELDIV_MASK = 0x1f, PLL_ACTRL2_SELDIV_SHIFT = 9, PLL_ACTRL6 = 0x86, PLL1_REG_BANK = 0x060, PLL1_ACTRL2 = 0x82, PLL1_ACTRL3 = 0x83, PLL1_ACTRL4 = 0x84, PLL1_ACTRL5 = 0x85, PLL1_ACTRL6 = 0x86, PLL1_ACTRL7 = 0x87, PLL1_ACTRL8 = 0x88, TX_REG_BANK = 0x070, TX_ACTRL0 = 0x80, TX_ACTRL0_TXPOL_FLIP = BIT(6), TX_ACTRL5 = 0x85, TX_ACTRL5_SSC_EN = BIT(11), AEQRX_REG_BANK_0 = 0xd0, AEQ_CONTROL1 = 0x81, AEQ_CONTROL1_ENABLE = BIT(2), AEQ_CONTROL1_FREEZE = BIT(3), AEQ_FRC_EQ = 0x83, AEQ_FRC_EQ_FORCE = BIT(0), AEQ_FRC_EQ_FORCE_VAL = BIT(1), AEQ_RFZ_FRC_VAL = BIT(8), AEQRX_REG_BANK_1 = 0xe0, AEQRX_SLCAL0_CTRL0 = 0x82, AEQRX_SLCAL1_CTRL0 = 0x86, OOB_REG_BANK = 0x150, OOB1_REG_BANK = 0x160, OOB_CTRL1 = 0x80, OOB_CTRL1_BURST_MAX_MASK = 0xf, OOB_CTRL1_BURST_MAX_SHIFT = 12, OOB_CTRL1_BURST_MIN_MASK = 0xf, OOB_CTRL1_BURST_MIN_SHIFT = 8, OOB_CTRL1_WAKE_IDLE_MAX_MASK = 0xf, OOB_CTRL1_WAKE_IDLE_MAX_SHIFT = 4, OOB_CTRL1_WAKE_IDLE_MIN_MASK = 0xf, OOB_CTRL1_WAKE_IDLE_MIN_SHIFT = 0, OOB_CTRL2 = 0x81, OOB_CTRL2_SEL_ENA_SHIFT = 15, OOB_CTRL2_SEL_ENA_RC_SHIFT = 14, OOB_CTRL2_RESET_IDLE_MAX_MASK = 0x3f, OOB_CTRL2_RESET_IDLE_MAX_SHIFT = 8, OOB_CTRL2_BURST_CNT_MASK = 0x3, OOB_CTRL2_BURST_CNT_SHIFT = 6, OOB_CTRL2_RESET_IDLE_MIN_MASK = 0x3f, OOB_CTRL2_RESET_IDLE_MIN_SHIFT = 0, TXPMD_REG_BANK = 0x1a0, TXPMD_CONTROL1 = 0x81, TXPMD_CONTROL1_TX_SSC_EN_FRC = BIT(0), TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL = BIT(1), TXPMD_TX_FREQ_CTRL_CONTROL1 = 0x82, TXPMD_TX_FREQ_CTRL_CONTROL2 = 0x83, TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK = 0x3ff, TXPMD_TX_FREQ_CTRL_CONTROL3 = 0x84, TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff, RXPMD_REG_BANK = 0x1c0, RXPMD_RX_CDR_CONTROL1 = 0x81, RXPMD_RX_PPM_VAL_MASK = 0x1ff, RXPMD_RXPMD_EN_FRC = BIT(12), RXPMD_RXPMD_EN_FRC_VAL = BIT(13), RXPMD_RX_CDR_CDR_PROP_BW = 0x82, RXPMD_G_CDR_PROP_BW_MASK = 0x7, RXPMD_G1_CDR_PROP_BW_SHIFT = 0, RXPMD_G2_CDR_PROP_BW_SHIFT = 3, RXPMD_G3_CDR_PROB_BW_SHIFT = 6, RXPMD_RX_CDR_CDR_ACQ_INTEG_BW = 0x83, RXPMD_G_CDR_ACQ_INT_BW_MASK = 0x7, RXPMD_G1_CDR_ACQ_INT_BW_SHIFT = 0, RXPMD_G2_CDR_ACQ_INT_BW_SHIFT = 3, RXPMD_G3_CDR_ACQ_INT_BW_SHIFT = 6, RXPMD_RX_CDR_CDR_LOCK_INTEG_BW = 0x84, RXPMD_G_CDR_LOCK_INT_BW_MASK = 0x7, RXPMD_G1_CDR_LOCK_INT_BW_SHIFT = 0, RXPMD_G2_CDR_LOCK_INT_BW_SHIFT = 3, RXPMD_G3_CDR_LOCK_INT_BW_SHIFT = 6, RXPMD_RX_FREQ_MON_CONTROL1 = 0x87, RXPMD_MON_CORRECT_EN = BIT(8), RXPMD_MON_MARGIN_VAL_MASK = 0xff, }; enum sata_phy_ctrl_regs { PHY_CTRL_1 = 0x0, PHY_CTRL_1_RESET = BIT(0), }; static inline void __iomem *brcm_sata_ctrl_base(struct brcm_sata_port *port) { struct brcm_sata_phy *priv = port->phy_priv; u32 size = 0; switch (priv->version) { case BRCM_SATA_PHY_IPROC_NS2: size = SATA_PHY_CTRL_REG_28NM_SPACE_SIZE; break; default: dev_err(priv->dev, "invalid phy version\n"); break; } return priv->ctrl_base + (port->portnum * size); } static void brcm_sata_phy_wr(struct brcm_sata_port *port, u32 bank, u32 ofs, u32 msk, u32 value) { struct brcm_sata_phy *priv = port->phy_priv; void __iomem *pcb_base = priv->phy_base; u32 tmp; if (priv->version == BRCM_SATA_PHY_STB_40NM) bank += (port->portnum * SATA_PCB_REG_40NM_SPACE_SIZE); else pcb_base += (port->portnum * SATA_PCB_REG_28NM_SPACE_SIZE); writel(bank, pcb_base + SATA_PCB_BANK_OFFSET); tmp = readl(pcb_base + SATA_PCB_REG_OFFSET(ofs)); tmp = (tmp & msk) | value; writel(tmp, pcb_base + SATA_PCB_REG_OFFSET(ofs)); } static u32 brcm_sata_phy_rd(struct brcm_sata_port *port, u32 bank, u32 ofs) { struct brcm_sata_phy *priv = port->phy_priv; void __iomem *pcb_base = priv->phy_base; if (priv->version == BRCM_SATA_PHY_STB_40NM) bank += (port->portnum * SATA_PCB_REG_40NM_SPACE_SIZE); else pcb_base += (port->portnum * SATA_PCB_REG_28NM_SPACE_SIZE); writel(bank, pcb_base + SATA_PCB_BANK_OFFSET); return readl(pcb_base + SATA_PCB_REG_OFFSET(ofs)); } /* These defaults were characterized by H/W group */ #define STB_FMIN_VAL_DEFAULT 0x3df #define STB_FMAX_VAL_DEFAULT 0x3df #define STB_FMAX_VAL_SSC 0x83 static void brcm_stb_sata_ssc_init(struct brcm_sata_port *port) { struct brcm_sata_phy *priv = port->phy_priv; u32 tmp; /* override the TX spread spectrum setting */ tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC; brcm_sata_phy_wr(port, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp); /* set fixed min freq */ brcm_sata_phy_wr(port, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2, ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK, STB_FMIN_VAL_DEFAULT); /* set fixed max freq depending on SSC config */ if (port->ssc_en) { dev_info(priv->dev, "enabling SSC on port%d\n", port->portnum); tmp = STB_FMAX_VAL_SSC; } else { tmp = STB_FMAX_VAL_DEFAULT; } brcm_sata_phy_wr(port, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3, ~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp); } #define AEQ_FRC_EQ_VAL_SHIFT 2 #define AEQ_FRC_EQ_VAL_MASK 0x3f static int brcm_stb_sata_rxaeq_init(struct brcm_sata_port *port) { u32 tmp = 0, reg = 0; switch (port->rxaeq_mode) { case RXAEQ_MODE_OFF: return 0; case RXAEQ_MODE_AUTO: reg = AEQ_CONTROL1; tmp = AEQ_CONTROL1_ENABLE | AEQ_CONTROL1_FREEZE; break; case RXAEQ_MODE_MANUAL: reg = AEQ_FRC_EQ; tmp = AEQ_FRC_EQ_FORCE | AEQ_FRC_EQ_FORCE_VAL; if (port->rxaeq_val > AEQ_FRC_EQ_VAL_MASK) return -EINVAL; tmp |= port->rxaeq_val << AEQ_FRC_EQ_VAL_SHIFT; break; } brcm_sata_phy_wr(port, AEQRX_REG_BANK_0, reg, ~tmp, tmp); brcm_sata_phy_wr(port, AEQRX_REG_BANK_1, reg, ~tmp, tmp); return 0; } static int brcm_stb_sata_init(struct brcm_sata_port *port) { brcm_stb_sata_ssc_init(port); return brcm_stb_sata_rxaeq_init(port); } static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port) { u32 tmp, value; /* Reduce CP tail current to 1/16th of its default value */ brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0x141); /* Turn off CP tail current boost */ brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL8, 0, 0xc006); /* Set a specific AEQ equalizer value */ tmp = AEQ_FRC_EQ_FORCE_VAL | AEQ_FRC_EQ_FORCE; brcm_sata_phy_wr(port, AEQRX_REG_BANK_0, AEQ_FRC_EQ, ~(tmp | AEQ_RFZ_FRC_VAL | AEQ_FRC_EQ_VAL_MASK << AEQ_FRC_EQ_VAL_SHIFT), tmp | 32 << AEQ_FRC_EQ_VAL_SHIFT); /* Set RX PPM val center frequency */ if (port->ssc_en) value = 0x52; else value = 0; brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CONTROL1, ~RXPMD_RX_PPM_VAL_MASK, value); /* Set proportional loop bandwith Gen1/2/3 */ tmp = RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G1_CDR_PROP_BW_SHIFT | RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G2_CDR_PROP_BW_SHIFT | RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G3_CDR_PROB_BW_SHIFT; if (port->ssc_en) value = 2 << RXPMD_G1_CDR_PROP_BW_SHIFT | 2 << RXPMD_G2_CDR_PROP_BW_SHIFT | 2 << RXPMD_G3_CDR_PROB_BW_SHIFT; else value = 1 << RXPMD_G1_CDR_PROP_BW_SHIFT | 1 << RXPMD_G2_CDR_PROP_BW_SHIFT | 1 << RXPMD_G3_CDR_PROB_BW_SHIFT; brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_PROP_BW, ~tmp, value); /* Set CDR integral loop acquisition bandwidth for Gen1/2/3 */ tmp = RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G1_CDR_ACQ_INT_BW_SHIFT | RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G2_CDR_ACQ_INT_BW_SHIFT | RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT; if (port->ssc_en) value = 1 << RXPMD_G1_CDR_ACQ_INT_BW_SHIFT | 1 << RXPMD_G2_CDR_ACQ_INT_BW_SHIFT | 1 << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT; else value = 0; brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_ACQ_INTEG_BW, ~tmp, value); /* Set CDR integral loop locking bandwidth to 1 for Gen 1/2/3 */ tmp = RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G1_CDR_LOCK_INT_BW_SHIFT | RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G2_CDR_LOCK_INT_BW_SHIFT | RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT; if (port->ssc_en) value = 1 << RXPMD_G1_CDR_LOCK_INT_BW_SHIFT | 1 << RXPMD_G2_CDR_LOCK_INT_BW_SHIFT | 1 << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT; else value = 0; brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_LOCK_INTEG_BW, ~tmp, value); /* Set no guard band and clamp CDR */ tmp = RXPMD_MON_CORRECT_EN | RXPMD_MON_MARGIN_VAL_MASK; if (port->ssc_en) value = 0x51; else value = 0; brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1, ~tmp, RXPMD_MON_CORRECT_EN | value); tmp = GENMASK(15, 12); switch (port->tx_amplitude_val) { case 400: value = BIT(12) | BIT(13); break; case 500: value = BIT(13); break; case 600: value = BIT(12); break; case 800: value = 0; break; default: value = tmp; break; } if (value != tmp) brcm_sata_phy_wr(port, BLOCK1_REG_BANK, BLOCK1_TEST_TX, ~tmp, value); /* Turn on/off SSC */ brcm_sata_phy_wr(port, TX_REG_BANK, TX_ACTRL5, ~TX_ACTRL5_SSC_EN, port->ssc_en ? TX_ACTRL5_SSC_EN : 0); return 0; } static int brcm_stb_sata_16nm_init(struct brcm_sata_port *port) { return brcm_stb_sata_16nm_ssc_init(port); } /* NS2 SATA PLL1 defaults were characterized by H/W group */ #define NS2_PLL1_ACTRL2_MAGIC 0x1df8 #define NS2_PLL1_ACTRL3_MAGIC 0x2b00 #define NS2_PLL1_ACTRL4_MAGIC 0x8824 static int brcm_ns2_sata_init(struct brcm_sata_port *port) { int try; unsigned int val; void __iomem *ctrl_base = brcm_sata_ctrl_base(port); struct device *dev = port->phy_priv->dev; /* Configure OOB control */ val = 0x0; val |= (0xc << OOB_CTRL1_BURST_MAX_SHIFT); val |= (0x4 << OOB_CTRL1_BURST_MIN_SHIFT); val |= (0x9 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT); val |= (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT); brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL1, 0x0, val); val = 0x0; val |= (0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT); val |= (0x2 << OOB_CTRL2_BURST_CNT_SHIFT); val |= (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT); brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL2, 0x0, val); /* Configure PHY PLL register bank 1 */ val = NS2_PLL1_ACTRL2_MAGIC; brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val); val = NS2_PLL1_ACTRL3_MAGIC; brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val); val = NS2_PLL1_ACTRL4_MAGIC; brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val); /* Configure PHY BLOCK0 register bank */ /* Set oob_clk_sel to refclk/2 */ brcm_sata_phy_wr(port, BLOCK0_REG_BANK, BLOCK0_SPARE, ~BLOCK0_SPARE_OOB_CLK_SEL_MASK, BLOCK0_SPARE_OOB_CLK_SEL_REFBY2); /* Strobe PHY reset using PHY control register */ writel(PHY_CTRL_1_RESET, ctrl_base + PHY_CTRL_1); mdelay(1); writel(0x0, ctrl_base + PHY_CTRL_1); mdelay(1); /* Wait for PHY PLL lock by polling pll_lock bit */ try = 50; while (try) { val = brcm_sata_phy_rd(port, BLOCK0_REG_BANK, BLOCK0_XGXSSTATUS); if (val & BLOCK0_XGXSSTATUS_PLL_LOCK) break; msleep(20); try--; } if (!try) { /* PLL did not lock; give up */ dev_err(dev, "port%d PLL did not lock\n", port->portnum); return -ETIMEDOUT; } dev_dbg(dev, "port%d initialized\n", port->portnum); return 0; } static int brcm_nsp_sata_init(struct brcm_sata_port *port) { struct device *dev = port->phy_priv->dev; unsigned int oob_bank; unsigned int val, try; /* Configure OOB control */ if (port->portnum == 0) oob_bank = OOB_REG_BANK; else if (port->portnum == 1) oob_bank = OOB1_REG_BANK; else return -EINVAL; val = 0x0; val |= (0x0f << OOB_CTRL1_BURST_MAX_SHIFT); val |= (0x06 << OOB_CTRL1_BURST_MIN_SHIFT); val |= (0x0f << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT); val |= (0x06 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT); brcm_sata_phy_wr(port, oob_bank, OOB_CTRL1, 0x0, val); val = 0x0; val |= (0x2e << OOB_CTRL2_RESET_IDLE_MAX_SHIFT); val |= (0x02 << OOB_CTRL2_BURST_CNT_SHIFT); val |= (0x16 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT); brcm_sata_phy_wr(port, oob_bank, OOB_CTRL2, 0x0, val); brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_ACTRL2, ~(PLL_ACTRL2_SELDIV_MASK << PLL_ACTRL2_SELDIV_SHIFT), 0x0c << PLL_ACTRL2_SELDIV_SHIFT); brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_CAP_CONTROL, 0xff0, 0x4f0); val = PLLCONTROL_0_FREQ_DET_RESTART | PLLCONTROL_0_FREQ_MONITOR; brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, ~val, val); val = PLLCONTROL_0_SEQ_START; brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, ~val, 0); mdelay(10); brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, ~val, val); /* Wait for pll_seq_done bit */ try = 50; while (--try) { val = brcm_sata_phy_rd(port, BLOCK0_REG_BANK, BLOCK0_XGXSSTATUS); if (val & BLOCK0_XGXSSTATUS_PLL_LOCK) break; msleep(20); } if (!try) { /* PLL did not lock; give up */ dev_err(dev, "port%d PLL did not lock\n", port->portnum); return -ETIMEDOUT; } dev_dbg(dev, "port%d initialized\n", port->portnum); return 0; } /* SR PHY PLL0 registers */ #define SR_PLL0_ACTRL6_MAGIC 0xa /* SR PHY PLL1 registers */ #define SR_PLL1_ACTRL2_MAGIC 0x32 #define SR_PLL1_ACTRL3_MAGIC 0x2 #define SR_PLL1_ACTRL4_MAGIC 0x3e8 static int brcm_sr_sata_init(struct brcm_sata_port *port) { struct device *dev = port->phy_priv->dev; unsigned int val, try; /* Configure PHY PLL register bank 1 */ val = SR_PLL1_ACTRL2_MAGIC; brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val); val = SR_PLL1_ACTRL3_MAGIC; brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val); val = SR_PLL1_ACTRL4_MAGIC; brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val); /* Configure PHY PLL register bank 0 */ val = SR_PLL0_ACTRL6_MAGIC; brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_ACTRL6, 0x0, val); /* Wait for PHY PLL lock by polling pll_lock bit */ try = 50; do { val = brcm_sata_phy_rd(port, BLOCK0_REG_BANK, BLOCK0_XGXSSTATUS); if (val & BLOCK0_XGXSSTATUS_PLL_LOCK) break; msleep(20); try--; } while (try); if ((val & BLOCK0_XGXSSTATUS_PLL_LOCK) == 0) { /* PLL did not lock; give up */ dev_err(dev, "port%d PLL did not lock\n", port->portnum); return -ETIMEDOUT; } /* Invert Tx polarity */ brcm_sata_phy_wr(port, TX_REG_BANK, TX_ACTRL0, ~TX_ACTRL0_TXPOL_FLIP, TX_ACTRL0_TXPOL_FLIP); /* Configure OOB control to handle 100MHz reference clock */ val = ((0xc << OOB_CTRL1_BURST_MAX_SHIFT) | (0x4 << OOB_CTRL1_BURST_MIN_SHIFT) | (0x8 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT) | (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT)); brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL1, 0x0, val); val = ((0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT) | (0x2 << OOB_CTRL2_BURST_CNT_SHIFT) | (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT)); brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL2, 0x0, val); return 0; } static int brcm_dsl_sata_init(struct brcm_sata_port *port) { struct device *dev = port->phy_priv->dev; unsigned int try; u32 tmp; brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL7, 0, 0x873); brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0xc000); brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, 0, 0x3089); usleep_range(1000, 2000); brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, 0, 0x3088); usleep_range(1000, 2000); brcm_sata_phy_wr(port, AEQRX_REG_BANK_1, AEQRX_SLCAL0_CTRL0, 0, 0x3000); brcm_sata_phy_wr(port, AEQRX_REG_BANK_1, AEQRX_SLCAL1_CTRL0, 0, 0x3000); usleep_range(1000, 2000); brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_CAP_CHARGE_TIME, 0, 0x32); brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_VCO_CAL_THRESH, 0, 0xa); brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_FREQ_DET_TIME, 0, 0x64); usleep_range(1000, 2000); /* Acquire PLL lock */ try = 50; while (try) { tmp = brcm_sata_phy_rd(port, BLOCK0_REG_BANK, BLOCK0_XGXSSTATUS); if (tmp & BLOCK0_XGXSSTATUS_PLL_LOCK) break; msleep(20); try--; } if (!try) { /* PLL did not lock; give up */ dev_err(dev, "port%d PLL did not lock\n", port->portnum); return -ETIMEDOUT; } dev_dbg(dev, "port%d initialized\n", port->portnum); return 0; } static int brcm_sata_phy_init(struct phy *phy) { int rc; struct brcm_sata_port *port = phy_get_drvdata(phy); switch (port->phy_priv->version) { case BRCM_SATA_PHY_STB_16NM: rc = brcm_stb_sata_16nm_init(port); break; case BRCM_SATA_PHY_STB_28NM: case BRCM_SATA_PHY_STB_40NM: rc = brcm_stb_sata_init(port); break; case BRCM_SATA_PHY_IPROC_NS2: rc = brcm_ns2_sata_init(port); break; case BRCM_SATA_PHY_IPROC_NSP: rc = brcm_nsp_sata_init(port); break; case BRCM_SATA_PHY_IPROC_SR: rc = brcm_sr_sata_init(port); break; case BRCM_SATA_PHY_DSL_28NM: rc = brcm_dsl_sata_init(port); break; default: rc = -ENODEV; } return rc; } static void brcm_stb_sata_calibrate(struct brcm_sata_port *port) { u32 tmp = BIT(8); brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1, ~tmp, tmp); } static int brcm_sata_phy_calibrate(struct phy *phy) { struct brcm_sata_port *port = phy_get_drvdata(phy); int rc = -EOPNOTSUPP; switch (port->phy_priv->version) { case BRCM_SATA_PHY_STB_28NM: case BRCM_SATA_PHY_STB_40NM: brcm_stb_sata_calibrate(port); rc = 0; break; default: break; } return rc; } static const struct phy_ops phy_ops = { .init = brcm_sata_phy_init, .calibrate = brcm_sata_phy_calibrate, .owner = THIS_MODULE, }; static const struct of_device_id brcm_sata_phy_of_match[] = { { .compatible = "brcm,bcm7216-sata-phy", .data = (void *)BRCM_SATA_PHY_STB_16NM }, { .compatible = "brcm,bcm7445-sata-phy", .data = (void *)BRCM_SATA_PHY_STB_28NM }, { .compatible = "brcm,bcm7425-sata-phy", .data = (void *)BRCM_SATA_PHY_STB_40NM }, { .compatible = "brcm,iproc-ns2-sata-phy", .data = (void *)BRCM_SATA_PHY_IPROC_NS2 }, { .compatible = "brcm,iproc-nsp-sata-phy", .data = (void *)BRCM_SATA_PHY_IPROC_NSP }, { .compatible = "brcm,iproc-sr-sata-phy", .data = (void *)BRCM_SATA_PHY_IPROC_SR }, { .compatible = "brcm,bcm63138-sata-phy", .data = (void *)BRCM_SATA_PHY_DSL_28NM }, {}, }; MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match); static int brcm_sata_phy_probe(struct platform_device *pdev) { const char *rxaeq_mode; struct device *dev = &pdev->dev; struct device_node *dn = dev->of_node, *child; const struct of_device_id *of_id; struct brcm_sata_phy *priv; struct phy_provider *provider; int ret, count = 0; if (of_get_child_count(dn) == 0) return -ENODEV; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; dev_set_drvdata(dev, priv); priv->dev = dev; priv->phy_base = devm_platform_ioremap_resource_byname(pdev, "phy"); if (IS_ERR(priv->phy_base)) return PTR_ERR(priv->phy_base); of_id = of_match_node(brcm_sata_phy_of_match, dn); if (of_id) priv->version = (enum brcm_sata_phy_version)of_id->data; else priv->version = BRCM_SATA_PHY_STB_28NM; if (priv->version == BRCM_SATA_PHY_IPROC_NS2) { priv->ctrl_base = devm_platform_ioremap_resource_byname(pdev, "phy-ctrl"); if (IS_ERR(priv->ctrl_base)) return PTR_ERR(priv->ctrl_base); } for_each_available_child_of_node(dn, child) { unsigned int id; struct brcm_sata_port *port; if (of_property_read_u32(child, "reg", &id)) { dev_err(dev, "missing reg property in node %pOFn\n", child); ret = -EINVAL; goto put_child; } if (id >= MAX_PORTS) { dev_err(dev, "invalid reg: %u\n", id); ret = -EINVAL; goto put_child; } if (priv->phys[id].phy) { dev_err(dev, "already registered port %u\n", id); ret = -EINVAL; goto put_child; } port = &priv->phys[id]; port->portnum = id; port->phy_priv = priv; port->phy = devm_phy_create(dev, child, &phy_ops); port->rxaeq_mode = RXAEQ_MODE_OFF; if (!of_property_read_string(child, "brcm,rxaeq-mode", &rxaeq_mode)) port->rxaeq_mode = rxaeq_to_val(rxaeq_mode); if (port->rxaeq_mode == RXAEQ_MODE_MANUAL) of_property_read_u32(child, "brcm,rxaeq-value", &port->rxaeq_val); of_property_read_u32(child, "brcm,tx-amplitude-millivolt", &port->tx_amplitude_val); port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc"); if (IS_ERR(port->phy)) { dev_err(dev, "failed to create PHY\n"); ret = PTR_ERR(port->phy); goto put_child; } phy_set_drvdata(port->phy, port); count++; } provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); if (IS_ERR(provider)) { dev_err(dev, "could not register PHY provider\n"); return PTR_ERR(provider); } dev_info(dev, "registered %d port(s)\n", count); return 0; put_child: of_node_put(child); return ret; } static struct platform_driver brcm_sata_phy_driver = { .probe = brcm_sata_phy_probe, .driver = { .of_match_table = brcm_sata_phy_of_match, .name = "brcm-sata-phy", } }; module_platform_driver(brcm_sata_phy_driver); MODULE_DESCRIPTION("Broadcom SATA PHY driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Marc Carino"); MODULE_AUTHOR("Brian Norris"); MODULE_ALIAS("platform:phy-brcm-sata");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1