| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Vincent Cheng | 1686 | 96.23% | 3 | 60.00% |
| Min Li | 66 | 3.77% | 2 | 40.00% |
| Total | 1752 | 5 |
/* SPDX-License-Identifier: GPL-2.0+ */ /* idt8a340_reg.h * * Originally generated by regen.tcl on Thu Feb 14 19:23:44 PST 2019 * https://github.com/richardcochran/regen * * Hand modified to include some HW registers. * Based on 4.8.0, SCSR rev C commit a03c7ae5 */ #ifndef HAVE_IDT8A340_REG #define HAVE_IDT8A340_REG #define PAGE_ADDR_BASE 0x0000 #define PAGE_ADDR 0x00fc #define HW_REVISION 0x8180 #define REV_ID 0x007a #define HW_DPLL_0 (0x8a00) #define HW_DPLL_1 (0x8b00) #define HW_DPLL_2 (0x8c00) #define HW_DPLL_3 (0x8d00) #define HW_DPLL_4 (0x8e00) #define HW_DPLL_5 (0x8f00) #define HW_DPLL_6 (0x9000) #define HW_DPLL_7 (0x9100) #define HW_DPLL_TOD_SW_TRIG_ADDR__0 (0x080) #define HW_DPLL_TOD_CTRL_1 (0x089) #define HW_DPLL_TOD_CTRL_2 (0x08A) #define HW_DPLL_TOD_OVR__0 (0x098) #define HW_DPLL_TOD_OUT_0__0 (0x0B0) #define HW_Q0_Q1_CH_SYNC_CTRL_0 (0xa740) #define HW_Q0_Q1_CH_SYNC_CTRL_1 (0xa741) #define HW_Q2_Q3_CH_SYNC_CTRL_0 (0xa742) #define HW_Q2_Q3_CH_SYNC_CTRL_1 (0xa743) #define HW_Q4_Q5_CH_SYNC_CTRL_0 (0xa744) #define HW_Q4_Q5_CH_SYNC_CTRL_1 (0xa745) #define HW_Q6_Q7_CH_SYNC_CTRL_0 (0xa746) #define HW_Q6_Q7_CH_SYNC_CTRL_1 (0xa747) #define HW_Q8_CH_SYNC_CTRL_0 (0xa748) #define HW_Q8_CH_SYNC_CTRL_1 (0xa749) #define HW_Q9_CH_SYNC_CTRL_0 (0xa74a) #define HW_Q9_CH_SYNC_CTRL_1 (0xa74b) #define HW_Q10_CH_SYNC_CTRL_0 (0xa74c) #define HW_Q10_CH_SYNC_CTRL_1 (0xa74d) #define HW_Q11_CH_SYNC_CTRL_0 (0xa74e) #define HW_Q11_CH_SYNC_CTRL_1 (0xa74f) #define SYNC_SOURCE_DPLL0_TOD_PPS 0x14 #define SYNC_SOURCE_DPLL1_TOD_PPS 0x15 #define SYNC_SOURCE_DPLL2_TOD_PPS 0x16 #define SYNC_SOURCE_DPLL3_TOD_PPS 0x17 #define SYNCTRL1_MASTER_SYNC_RST BIT(7) #define SYNCTRL1_MASTER_SYNC_TRIG BIT(5) #define SYNCTRL1_TOD_SYNC_TRIG BIT(4) #define SYNCTRL1_FBDIV_FRAME_SYNC_TRIG BIT(3) #define SYNCTRL1_FBDIV_SYNC_TRIG BIT(2) #define SYNCTRL1_Q1_DIV_SYNC_TRIG BIT(1) #define SYNCTRL1_Q0_DIV_SYNC_TRIG BIT(0) #define HW_Q8_CTRL_SPARE (0xa7d4) #define HW_Q11_CTRL_SPARE (0xa7ec) /** * Select FOD5 as sync_trigger for Q8 divider. * Transition from logic zero to one * sets trigger to sync Q8 divider. * * Unused when FOD4 is driving Q8 divider (normal operation). */ #define Q9_TO_Q8_SYNC_TRIG BIT(1) /** * Enable FOD5 as driver for clock and sync for Q8 divider. * Enable fanout buffer for FOD5. * * Unused when FOD4 is driving Q8 divider (normal operation). */ #define Q9_TO_Q8_FANOUT_AND_CLOCK_SYNC_ENABLE_MASK (BIT(0) | BIT(2)) /** * Select FOD6 as sync_trigger for Q11 divider. * Transition from logic zero to one * sets trigger to sync Q11 divider. * * Unused when FOD7 is driving Q11 divider (normal operation). */ #define Q10_TO_Q11_SYNC_TRIG BIT(1) /** * Enable FOD6 as driver for clock and sync for Q11 divider. * Enable fanout buffer for FOD6. * * Unused when FOD7 is driving Q11 divider (normal operation). */ #define Q10_TO_Q11_FANOUT_AND_CLOCK_SYNC_ENABLE_MASK (BIT(0) | BIT(2)) #define RESET_CTRL 0xc000 #define SM_RESET 0x0012 #define SM_RESET_CMD 0x5A #define GENERAL_STATUS 0xc014 #define BOOT_STATUS 0x0000 #define HW_REV_ID 0x000A #define BOND_ID 0x000B #define HW_CSR_ID 0x000C #define HW_IRQ_ID 0x000E #define MAJ_REL 0x0010 #define MIN_REL 0x0011 #define HOTFIX_REL 0x0012 #define PIPELINE_ID 0x0014 #define BUILD_ID 0x0018 #define JTAG_DEVICE_ID 0x001c #define PRODUCT_ID 0x001e #define OTP_SCSR_CONFIG_SELECT 0x0022 #define STATUS 0xc03c #define DPLL_SYS_STATUS 0x0020 #define DPLL_SYS_APLL_STATUS 0x0021 #define USER_GPIO0_TO_7_STATUS 0x008a #define USER_GPIO8_TO_15_STATUS 0x008b #define GPIO_USER_CONTROL 0xc160 #define GPIO0_TO_7_OUT 0x0000 #define GPIO8_TO_15_OUT 0x0001 #define STICKY_STATUS_CLEAR 0xc164 #define GPIO_TOD_NOTIFICATION_CLEAR 0xc16c #define ALERT_CFG 0xc188 #define SYS_DPLL_XO 0xc194 #define SYS_APLL 0xc19c #define INPUT_0 0xc1b0 #define INPUT_1 0xc1c0 #define INPUT_2 0xc1d0 #define INPUT_3 0xc200 #define INPUT_4 0xc210 #define INPUT_5 0xc220 #define INPUT_6 0xc230 #define INPUT_7 0xc240 #define INPUT_8 0xc250 #define INPUT_9 0xc260 #define INPUT_10 0xc280 #define INPUT_11 0xc290 #define INPUT_12 0xc2a0 #define INPUT_13 0xc2b0 #define INPUT_14 0xc2c0 #define INPUT_15 0xc2d0 #define REF_MON_0 0xc2e0 #define REF_MON_1 0xc2ec #define REF_MON_2 0xc300 #define REF_MON_3 0xc30c #define REF_MON_4 0xc318 #define REF_MON_5 0xc324 #define REF_MON_6 0xc330 #define REF_MON_7 0xc33c #define REF_MON_8 0xc348 #define REF_MON_9 0xc354 #define REF_MON_10 0xc360 #define REF_MON_11 0xc36c #define REF_MON_12 0xc380 #define REF_MON_13 0xc38c #define REF_MON_14 0xc398 #define REF_MON_15 0xc3a4 #define DPLL_0 0xc3b0 #define DPLL_CTRL_REG_0 0x0002 #define DPLL_CTRL_REG_1 0x0003 #define DPLL_CTRL_REG_2 0x0004 #define DPLL_TOD_SYNC_CFG 0x0031 #define DPLL_COMBO_SLAVE_CFG_0 0x0032 #define DPLL_COMBO_SLAVE_CFG_1 0x0033 #define DPLL_SLAVE_REF_CFG 0x0034 #define DPLL_REF_MODE 0x0035 #define DPLL_PHASE_MEASUREMENT_CFG 0x0036 #define DPLL_MODE 0x0037 #define DPLL_1 0xc400 #define DPLL_2 0xc438 #define DPLL_3 0xc480 #define DPLL_4 0xc4b8 #define DPLL_5 0xc500 #define DPLL_6 0xc538 #define DPLL_7 0xc580 #define SYS_DPLL 0xc5b8 #define DPLL_CTRL_0 0xc600 #define DPLL_CTRL_DPLL_MANU_REF_CFG 0x0001 #define DPLL_CTRL_COMBO_MASTER_CFG 0x003a #define DPLL_CTRL_1 0xc63c #define DPLL_CTRL_2 0xc680 #define DPLL_CTRL_3 0xc6bc #define DPLL_CTRL_4 0xc700 #define DPLL_CTRL_5 0xc73c #define DPLL_CTRL_6 0xc780 #define DPLL_CTRL_7 0xc7bc #define SYS_DPLL_CTRL 0xc800 #define DPLL_PHASE_0 0xc818 /* Signed 42-bit FFO in units of 2^(-53) */ #define DPLL_WR_PHASE 0x0000 #define DPLL_PHASE_1 0xc81c #define DPLL_PHASE_2 0xc820 #define DPLL_PHASE_3 0xc824 #define DPLL_PHASE_4 0xc828 #define DPLL_PHASE_5 0xc82c #define DPLL_PHASE_6 0xc830 #define DPLL_PHASE_7 0xc834 #define DPLL_FREQ_0 0xc838 /* Signed 42-bit FFO in units of 2^(-53) */ #define DPLL_WR_FREQ 0x0000 #define DPLL_FREQ_1 0xc840 #define DPLL_FREQ_2 0xc848 #define DPLL_FREQ_3 0xc850 #define DPLL_FREQ_4 0xc858 #define DPLL_FREQ_5 0xc860 #define DPLL_FREQ_6 0xc868 #define DPLL_FREQ_7 0xc870 #define DPLL_PHASE_PULL_IN_0 0xc880 #define PULL_IN_OFFSET 0x0000 /* Signed 32 bit */ #define PULL_IN_SLOPE_LIMIT 0x0004 /* Unsigned 24 bit */ #define PULL_IN_CTRL 0x0007 #define DPLL_PHASE_PULL_IN_1 0xc888 #define DPLL_PHASE_PULL_IN_2 0xc890 #define DPLL_PHASE_PULL_IN_3 0xc898 #define DPLL_PHASE_PULL_IN_4 0xc8a0 #define DPLL_PHASE_PULL_IN_5 0xc8a8 #define DPLL_PHASE_PULL_IN_6 0xc8b0 #define DPLL_PHASE_PULL_IN_7 0xc8b8 #define GPIO_CFG 0xc8c0 #define GPIO_CFG_GBL 0x0000 #define GPIO_0 0xc8c2 #define GPIO_DCO_INC_DEC 0x0000 #define GPIO_OUT_CTRL_0 0x0001 #define GPIO_OUT_CTRL_1 0x0002 #define GPIO_TOD_TRIG 0x0003 #define GPIO_DPLL_INDICATOR 0x0004 #define GPIO_LOS_INDICATOR 0x0005 #define GPIO_REF_INPUT_DSQ_0 0x0006 #define GPIO_REF_INPUT_DSQ_1 0x0007 #define GPIO_REF_INPUT_DSQ_2 0x0008 #define GPIO_REF_INPUT_DSQ_3 0x0009 #define GPIO_MAN_CLK_SEL_0 0x000a #define GPIO_MAN_CLK_SEL_1 0x000b #define GPIO_MAN_CLK_SEL_2 0x000c #define GPIO_SLAVE 0x000d #define GPIO_ALERT_OUT_CFG 0x000e #define GPIO_TOD_NOTIFICATION_CFG 0x000f #define GPIO_CTRL 0x0010 #define GPIO_1 0xc8d4 #define GPIO_2 0xc8e6 #define GPIO_3 0xc900 #define GPIO_4 0xc912 #define GPIO_5 0xc924 #define GPIO_6 0xc936 #define GPIO_7 0xc948 #define GPIO_8 0xc95a #define GPIO_9 0xc980 #define GPIO_10 0xc992 #define GPIO_11 0xc9a4 #define GPIO_12 0xc9b6 #define GPIO_13 0xc9c8 #define GPIO_14 0xc9da #define GPIO_15 0xca00 #define OUT_DIV_MUX 0xca12 #define OUTPUT_0 0xca14 /* FOD frequency output divider value */ #define OUT_DIV 0x0000 #define OUT_DUTY_CYCLE_HIGH 0x0004 #define OUT_CTRL_0 0x0008 #define OUT_CTRL_1 0x0009 /* Phase adjustment in FOD cycles */ #define OUT_PHASE_ADJ 0x000c #define OUTPUT_1 0xca24 #define OUTPUT_2 0xca34 #define OUTPUT_3 0xca44 #define OUTPUT_4 0xca54 #define OUTPUT_5 0xca64 #define OUTPUT_6 0xca80 #define OUTPUT_7 0xca90 #define OUTPUT_8 0xcaa0 #define OUTPUT_9 0xcab0 #define OUTPUT_10 0xcac0 #define OUTPUT_11 0xcad0 #define SERIAL 0xcae0 #define PWM_ENCODER_0 0xcb00 #define PWM_ENCODER_1 0xcb08 #define PWM_ENCODER_2 0xcb10 #define PWM_ENCODER_3 0xcb18 #define PWM_ENCODER_4 0xcb20 #define PWM_ENCODER_5 0xcb28 #define PWM_ENCODER_6 0xcb30 #define PWM_ENCODER_7 0xcb38 #define PWM_DECODER_0 0xcb40 #define PWM_DECODER_1 0xcb48 #define PWM_DECODER_2 0xcb50 #define PWM_DECODER_3 0xcb58 #define PWM_DECODER_4 0xcb60 #define PWM_DECODER_5 0xcb68 #define PWM_DECODER_6 0xcb70 #define PWM_DECODER_7 0xcb80 #define PWM_DECODER_8 0xcb88 #define PWM_DECODER_9 0xcb90 #define PWM_DECODER_10 0xcb98 #define PWM_DECODER_11 0xcba0 #define PWM_DECODER_12 0xcba8 #define PWM_DECODER_13 0xcbb0 #define PWM_DECODER_14 0xcbb8 #define PWM_DECODER_15 0xcbc0 #define PWM_USER_DATA 0xcbc8 #define TOD_0 0xcbcc /* Enable TOD counter, output channel sync and even-PPS mode */ #define TOD_CFG 0x0000 #define TOD_1 0xcbce #define TOD_2 0xcbd0 #define TOD_3 0xcbd2 #define TOD_WRITE_0 0xcc00 /* 8-bit subns, 32-bit ns, 48-bit seconds */ #define TOD_WRITE 0x0000 /* Counter increments after TOD write is completed */ #define TOD_WRITE_COUNTER 0x000c /* TOD write trigger configuration */ #define TOD_WRITE_SELECT_CFG_0 0x000d /* TOD write trigger selection */ #define TOD_WRITE_CMD 0x000f #define TOD_WRITE_1 0xcc10 #define TOD_WRITE_2 0xcc20 #define TOD_WRITE_3 0xcc30 #define TOD_READ_PRIMARY_0 0xcc40 /* 8-bit subns, 32-bit ns, 48-bit seconds */ #define TOD_READ_PRIMARY 0x0000 /* Counter increments after TOD write is completed */ #define TOD_READ_PRIMARY_COUNTER 0x000b /* Read trigger configuration */ #define TOD_READ_PRIMARY_SEL_CFG_0 0x000c /* Read trigger selection */ #define TOD_READ_PRIMARY_CMD 0x000e #define TOD_READ_PRIMARY_1 0xcc50 #define TOD_READ_PRIMARY_2 0xcc60 #define TOD_READ_PRIMARY_3 0xcc80 #define TOD_READ_SECONDARY_0 0xcc90 #define TOD_READ_SECONDARY_1 0xcca0 #define TOD_READ_SECONDARY_2 0xccb0 #define TOD_READ_SECONDARY_3 0xccc0 #define OUTPUT_TDC_CFG 0xccd0 #define OUTPUT_TDC_0 0xcd00 #define OUTPUT_TDC_1 0xcd08 #define OUTPUT_TDC_2 0xcd10 #define OUTPUT_TDC_3 0xcd18 #define INPUT_TDC 0xcd20 #define SCRATCH 0xcf50 #define EEPROM 0xcf68 #define OTP 0xcf70 #define BYTE 0xcf80 /* Bit definitions for the MAJ_REL register */ #define MAJOR_SHIFT (1) #define MAJOR_MASK (0x7f) #define PR_BUILD BIT(0) /* Bit definitions for the USER_GPIO0_TO_7_STATUS register */ #define GPIO0_LEVEL BIT(0) #define GPIO1_LEVEL BIT(1) #define GPIO2_LEVEL BIT(2) #define GPIO3_LEVEL BIT(3) #define GPIO4_LEVEL BIT(4) #define GPIO5_LEVEL BIT(5) #define GPIO6_LEVEL BIT(6) #define GPIO7_LEVEL BIT(7) /* Bit definitions for the USER_GPIO8_TO_15_STATUS register */ #define GPIO8_LEVEL BIT(0) #define GPIO9_LEVEL BIT(1) #define GPIO10_LEVEL BIT(2) #define GPIO11_LEVEL BIT(3) #define GPIO12_LEVEL BIT(4) #define GPIO13_LEVEL BIT(5) #define GPIO14_LEVEL BIT(6) #define GPIO15_LEVEL BIT(7) /* Bit definitions for the GPIO0_TO_7_OUT register */ #define GPIO0_DRIVE_LEVEL BIT(0) #define GPIO1_DRIVE_LEVEL BIT(1) #define GPIO2_DRIVE_LEVEL BIT(2) #define GPIO3_DRIVE_LEVEL BIT(3) #define GPIO4_DRIVE_LEVEL BIT(4) #define GPIO5_DRIVE_LEVEL BIT(5) #define GPIO6_DRIVE_LEVEL BIT(6) #define GPIO7_DRIVE_LEVEL BIT(7) /* Bit definitions for the GPIO8_TO_15_OUT register */ #define GPIO8_DRIVE_LEVEL BIT(0) #define GPIO9_DRIVE_LEVEL BIT(1) #define GPIO10_DRIVE_LEVEL BIT(2) #define GPIO11_DRIVE_LEVEL BIT(3) #define GPIO12_DRIVE_LEVEL BIT(4) #define GPIO13_DRIVE_LEVEL BIT(5) #define GPIO14_DRIVE_LEVEL BIT(6) #define GPIO15_DRIVE_LEVEL BIT(7) /* Bit definitions for the DPLL_TOD_SYNC_CFG register */ #define TOD_SYNC_SOURCE_SHIFT (1) #define TOD_SYNC_SOURCE_MASK (0x3) #define TOD_SYNC_EN BIT(0) /* Bit definitions for the DPLL_MODE register */ #define WRITE_TIMER_MODE BIT(6) #define PLL_MODE_SHIFT (3) #define PLL_MODE_MASK (0x7) #define STATE_MODE_SHIFT (0) #define STATE_MODE_MASK (0x7) /* Bit definitions for the GPIO_CFG_GBL register */ #define SUPPLY_MODE_SHIFT (0) #define SUPPLY_MODE_MASK (0x3) /* Bit definitions for the GPIO_DCO_INC_DEC register */ #define INCDEC_DPLL_INDEX_SHIFT (0) #define INCDEC_DPLL_INDEX_MASK (0x7) /* Bit definitions for the GPIO_OUT_CTRL_0 register */ #define CTRL_OUT_0 BIT(0) #define CTRL_OUT_1 BIT(1) #define CTRL_OUT_2 BIT(2) #define CTRL_OUT_3 BIT(3) #define CTRL_OUT_4 BIT(4) #define CTRL_OUT_5 BIT(5) #define CTRL_OUT_6 BIT(6) #define CTRL_OUT_7 BIT(7) /* Bit definitions for the GPIO_OUT_CTRL_1 register */ #define CTRL_OUT_8 BIT(0) #define CTRL_OUT_9 BIT(1) #define CTRL_OUT_10 BIT(2) #define CTRL_OUT_11 BIT(3) #define CTRL_OUT_12 BIT(4) #define CTRL_OUT_13 BIT(5) #define CTRL_OUT_14 BIT(6) #define CTRL_OUT_15 BIT(7) /* Bit definitions for the GPIO_TOD_TRIG register */ #define TOD_TRIG_0 BIT(0) #define TOD_TRIG_1 BIT(1) #define TOD_TRIG_2 BIT(2) #define TOD_TRIG_3 BIT(3) /* Bit definitions for the GPIO_DPLL_INDICATOR register */ #define IND_DPLL_INDEX_SHIFT (0) #define IND_DPLL_INDEX_MASK (0x7) /* Bit definitions for the GPIO_LOS_INDICATOR register */ #define REFMON_INDEX_SHIFT (0) #define REFMON_INDEX_MASK (0xf) /* Active level of LOS indicator, 0=low 1=high */ #define ACTIVE_LEVEL BIT(4) /* Bit definitions for the GPIO_REF_INPUT_DSQ_0 register */ #define DSQ_INP_0 BIT(0) #define DSQ_INP_1 BIT(1) #define DSQ_INP_2 BIT(2) #define DSQ_INP_3 BIT(3) #define DSQ_INP_4 BIT(4) #define DSQ_INP_5 BIT(5) #define DSQ_INP_6 BIT(6) #define DSQ_INP_7 BIT(7) /* Bit definitions for the GPIO_REF_INPUT_DSQ_1 register */ #define DSQ_INP_8 BIT(0) #define DSQ_INP_9 BIT(1) #define DSQ_INP_10 BIT(2) #define DSQ_INP_11 BIT(3) #define DSQ_INP_12 BIT(4) #define DSQ_INP_13 BIT(5) #define DSQ_INP_14 BIT(6) #define DSQ_INP_15 BIT(7) /* Bit definitions for the GPIO_REF_INPUT_DSQ_2 register */ #define DSQ_DPLL_0 BIT(0) #define DSQ_DPLL_1 BIT(1) #define DSQ_DPLL_2 BIT(2) #define DSQ_DPLL_3 BIT(3) #define DSQ_DPLL_4 BIT(4) #define DSQ_DPLL_5 BIT(5) #define DSQ_DPLL_6 BIT(6) #define DSQ_DPLL_7 BIT(7) /* Bit definitions for the GPIO_REF_INPUT_DSQ_3 register */ #define DSQ_DPLL_SYS BIT(0) #define GPIO_DSQ_LEVEL BIT(1) /* Bit definitions for the GPIO_TOD_NOTIFICATION_CFG register */ #define DPLL_TOD_SHIFT (0) #define DPLL_TOD_MASK (0x3) #define TOD_READ_SECONDARY BIT(2) #define GPIO_ASSERT_LEVEL BIT(3) /* Bit definitions for the GPIO_CTRL register */ #define GPIO_FUNCTION_EN BIT(0) #define GPIO_CMOS_OD_MODE BIT(1) #define GPIO_CONTROL_DIR BIT(2) #define GPIO_PU_PD_MODE BIT(3) #define GPIO_FUNCTION_SHIFT (4) #define GPIO_FUNCTION_MASK (0xf) /* Bit definitions for the OUT_CTRL_1 register */ #define OUT_SYNC_DISABLE BIT(7) #define SQUELCH_VALUE BIT(6) #define SQUELCH_DISABLE BIT(5) #define PAD_VDDO_SHIFT (2) #define PAD_VDDO_MASK (0x7) #define PAD_CMOSDRV_SHIFT (0) #define PAD_CMOSDRV_MASK (0x3) /* Bit definitions for the TOD_CFG register */ #define TOD_EVEN_PPS_MODE BIT(2) #define TOD_OUT_SYNC_ENABLE BIT(1) #define TOD_ENABLE BIT(0) /* Bit definitions for the TOD_WRITE_SELECT_CFG_0 register */ #define WR_PWM_DECODER_INDEX_SHIFT (4) #define WR_PWM_DECODER_INDEX_MASK (0xf) #define WR_REF_INDEX_SHIFT (0) #define WR_REF_INDEX_MASK (0xf) /* Bit definitions for the TOD_WRITE_CMD register */ #define TOD_WRITE_SELECTION_SHIFT (0) #define TOD_WRITE_SELECTION_MASK (0xf) /* 4.8.7 */ #define TOD_WRITE_TYPE_SHIFT (4) #define TOD_WRITE_TYPE_MASK (0x3) /* Bit definitions for the TOD_READ_PRIMARY_SEL_CFG_0 register */ #define RD_PWM_DECODER_INDEX_SHIFT (4) #define RD_PWM_DECODER_INDEX_MASK (0xf) #define RD_REF_INDEX_SHIFT (0) #define RD_REF_INDEX_MASK (0xf) /* Bit definitions for the TOD_READ_PRIMARY_CMD register */ #define TOD_READ_TRIGGER_MODE BIT(4) #define TOD_READ_TRIGGER_SHIFT (0) #define TOD_READ_TRIGGER_MASK (0xf) /* Bit definitions for the DPLL_CTRL_COMBO_MASTER_CFG register */ #define COMBO_MASTER_HOLD BIT(0) /* Bit definitions for DPLL_SYS_STATUS register */ #define DPLL_SYS_STATE_MASK (0xf) /* Bit definitions for SYS_APLL_STATUS register */ #define SYS_APLL_LOSS_LOCK_LIVE_MASK BIT(0) #define SYS_APLL_LOSS_LOCK_LIVE_LOCKED 0 #define SYS_APLL_LOSS_LOCK_LIVE_UNLOCKED 1 #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1