Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Boris Brezillon | 1565 | 60.31% | 5 | 35.71% |
Alexandre Belloni | 675 | 26.01% | 3 | 21.43% |
Romain Izard | 228 | 8.79% | 1 | 7.14% |
Uwe Kleine-König | 116 | 4.47% | 2 | 14.29% |
Axel Lin | 5 | 0.19% | 1 | 7.14% |
Wolfram Sang | 4 | 0.15% | 1 | 7.14% |
Thomas Gleixner | 2 | 0.08% | 1 | 7.14% |
Total | 2595 | 14 |
// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) Overkiz SAS 2012 * * Author: Boris BREZILLON <b.brezillon@overkiz.com> */ #include <linux/module.h> #include <linux/init.h> #include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/clk.h> #include <linux/err.h> #include <linux/ioport.h> #include <linux/io.h> #include <linux/mfd/syscon.h> #include <linux/platform_device.h> #include <linux/pwm.h> #include <linux/of_device.h> #include <linux/of_irq.h> #include <linux/regmap.h> #include <linux/slab.h> #include <soc/at91/atmel_tcb.h> #define NPWM 2 #define ATMEL_TC_ACMR_MASK (ATMEL_TC_ACPA | ATMEL_TC_ACPC | \ ATMEL_TC_AEEVT | ATMEL_TC_ASWTRG) #define ATMEL_TC_BCMR_MASK (ATMEL_TC_BCPB | ATMEL_TC_BCPC | \ ATMEL_TC_BEEVT | ATMEL_TC_BSWTRG) struct atmel_tcb_pwm_device { enum pwm_polarity polarity; /* PWM polarity */ unsigned div; /* PWM clock divider */ unsigned duty; /* PWM duty expressed in clk cycles */ unsigned period; /* PWM period expressed in clk cycles */ }; struct atmel_tcb_channel { u32 enabled; u32 cmr; u32 ra; u32 rb; u32 rc; }; struct atmel_tcb_pwm_chip { struct pwm_chip chip; spinlock_t lock; u8 channel; u8 width; struct regmap *regmap; struct clk *clk; struct clk *gclk; struct clk *slow_clk; struct atmel_tcb_pwm_device *pwms[NPWM]; struct atmel_tcb_channel bkup; }; const u8 atmel_tcb_divisors[] = { 2, 8, 32, 128, 0, }; static inline struct atmel_tcb_pwm_chip *to_tcb_chip(struct pwm_chip *chip) { return container_of(chip, struct atmel_tcb_pwm_chip, chip); } static int atmel_tcb_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, enum pwm_polarity polarity) { struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm); tcbpwm->polarity = polarity; return 0; } static int atmel_tcb_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) { struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); struct atmel_tcb_pwm_device *tcbpwm; unsigned cmr; int ret; tcbpwm = devm_kzalloc(chip->dev, sizeof(*tcbpwm), GFP_KERNEL); if (!tcbpwm) return -ENOMEM; ret = clk_prepare_enable(tcbpwmc->clk); if (ret) { devm_kfree(chip->dev, tcbpwm); return ret; } pwm_set_chip_data(pwm, tcbpwm); tcbpwm->polarity = PWM_POLARITY_NORMAL; tcbpwm->duty = 0; tcbpwm->period = 0; tcbpwm->div = 0; spin_lock(&tcbpwmc->lock); regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr); /* * Get init config from Timer Counter registers if * Timer Counter is already configured as a PWM generator. */ if (cmr & ATMEL_TC_WAVE) { if (pwm->hwpwm == 0) regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RA), &tcbpwm->duty); else regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RB), &tcbpwm->duty); tcbpwm->div = cmr & ATMEL_TC_TCCLKS; regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RC), &tcbpwm->period); cmr &= (ATMEL_TC_TCCLKS | ATMEL_TC_ACMR_MASK | ATMEL_TC_BCMR_MASK); } else cmr = 0; cmr |= ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO | ATMEL_TC_EEVT_XC0; regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr); spin_unlock(&tcbpwmc->lock); tcbpwmc->pwms[pwm->hwpwm] = tcbpwm; return 0; } static void atmel_tcb_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) { struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm); clk_disable_unprepare(tcbpwmc->clk); tcbpwmc->pwms[pwm->hwpwm] = NULL; devm_kfree(chip->dev, tcbpwm); } static void atmel_tcb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) { struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm); unsigned cmr; enum pwm_polarity polarity = tcbpwm->polarity; /* * If duty is 0 the timer will be stopped and we have to * configure the output correctly on software trigger: * - set output to high if PWM_POLARITY_INVERSED * - set output to low if PWM_POLARITY_NORMAL * * This is why we're reverting polarity in this case. */ if (tcbpwm->duty == 0) polarity = !polarity; spin_lock(&tcbpwmc->lock); regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr); /* flush old setting and set the new one */ if (pwm->hwpwm == 0) { cmr &= ~ATMEL_TC_ACMR_MASK; if (polarity == PWM_POLARITY_INVERSED) cmr |= ATMEL_TC_ASWTRG_CLEAR; else cmr |= ATMEL_TC_ASWTRG_SET; } else { cmr &= ~ATMEL_TC_BCMR_MASK; if (polarity == PWM_POLARITY_INVERSED) cmr |= ATMEL_TC_BSWTRG_CLEAR; else cmr |= ATMEL_TC_BSWTRG_SET; } regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr); /* * Use software trigger to apply the new setting. * If both PWM devices in this group are disabled we stop the clock. */ if (!(cmr & (ATMEL_TC_ACPC | ATMEL_TC_BCPC))) { regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CCR), ATMEL_TC_SWTRG | ATMEL_TC_CLKDIS); tcbpwmc->bkup.enabled = 1; } else { regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CCR), ATMEL_TC_SWTRG); tcbpwmc->bkup.enabled = 0; } spin_unlock(&tcbpwmc->lock); } static int atmel_tcb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) { struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm); u32 cmr; enum pwm_polarity polarity = tcbpwm->polarity; /* * If duty is 0 the timer will be stopped and we have to * configure the output correctly on software trigger: * - set output to high if PWM_POLARITY_INVERSED * - set output to low if PWM_POLARITY_NORMAL * * This is why we're reverting polarity in this case. */ if (tcbpwm->duty == 0) polarity = !polarity; spin_lock(&tcbpwmc->lock); regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr); /* flush old setting and set the new one */ cmr &= ~ATMEL_TC_TCCLKS; if (pwm->hwpwm == 0) { cmr &= ~ATMEL_TC_ACMR_MASK; /* Set CMR flags according to given polarity */ if (polarity == PWM_POLARITY_INVERSED) cmr |= ATMEL_TC_ASWTRG_CLEAR; else cmr |= ATMEL_TC_ASWTRG_SET; } else { cmr &= ~ATMEL_TC_BCMR_MASK; if (polarity == PWM_POLARITY_INVERSED) cmr |= ATMEL_TC_BSWTRG_CLEAR; else cmr |= ATMEL_TC_BSWTRG_SET; } /* * If duty is 0 or equal to period there's no need to register * a specific action on RA/RB and RC compare. * The output will be configured on software trigger and keep * this config till next config call. */ if (tcbpwm->duty != tcbpwm->period && tcbpwm->duty > 0) { if (pwm->hwpwm == 0) { if (polarity == PWM_POLARITY_INVERSED) cmr |= ATMEL_TC_ACPA_SET | ATMEL_TC_ACPC_CLEAR; else cmr |= ATMEL_TC_ACPA_CLEAR | ATMEL_TC_ACPC_SET; } else { if (polarity == PWM_POLARITY_INVERSED) cmr |= ATMEL_TC_BCPB_SET | ATMEL_TC_BCPC_CLEAR; else cmr |= ATMEL_TC_BCPB_CLEAR | ATMEL_TC_BCPC_SET; } } cmr |= (tcbpwm->div & ATMEL_TC_TCCLKS); regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr); if (pwm->hwpwm == 0) regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RA), tcbpwm->duty); else regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RB), tcbpwm->duty); regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RC), tcbpwm->period); /* Use software trigger to apply the new setting */ regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CCR), ATMEL_TC_SWTRG | ATMEL_TC_CLKEN); tcbpwmc->bkup.enabled = 1; spin_unlock(&tcbpwmc->lock); return 0; } static int atmel_tcb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, int duty_ns, int period_ns) { struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm); struct atmel_tcb_pwm_device *atcbpwm = NULL; int i = 0; int slowclk = 0; unsigned period; unsigned duty; unsigned rate = clk_get_rate(tcbpwmc->clk); unsigned long long min; unsigned long long max; /* * Find best clk divisor: * the smallest divisor which can fulfill the period_ns requirements. * If there is a gclk, the first divisor is actuallly the gclk selector */ if (tcbpwmc->gclk) i = 1; for (; i < ARRAY_SIZE(atmel_tcb_divisors); ++i) { if (atmel_tcb_divisors[i] == 0) { slowclk = i; continue; } min = div_u64((u64)NSEC_PER_SEC * atmel_tcb_divisors[i], rate); max = min << tcbpwmc->width; if (max >= period_ns) break; } /* * If none of the divisor are small enough to represent period_ns * take slow clock (32KHz). */ if (i == ARRAY_SIZE(atmel_tcb_divisors)) { i = slowclk; rate = clk_get_rate(tcbpwmc->slow_clk); min = div_u64(NSEC_PER_SEC, rate); max = min << tcbpwmc->width; /* If period is too big return ERANGE error */ if (max < period_ns) return -ERANGE; } duty = div_u64(duty_ns, min); period = div_u64(period_ns, min); if (pwm->hwpwm == 0) atcbpwm = tcbpwmc->pwms[1]; else atcbpwm = tcbpwmc->pwms[0]; /* * PWM devices provided by the TCB driver are grouped by 2. * PWM devices in a given group must be configured with the * same period_ns. * * We're checking the period value of the second PWM device * in this group before applying the new config. */ if ((atcbpwm && atcbpwm->duty > 0 && atcbpwm->duty != atcbpwm->period) && (atcbpwm->div != i || atcbpwm->period != period)) { dev_err(chip->dev, "failed to configure period_ns: PWM group already configured with a different value\n"); return -EINVAL; } tcbpwm->period = period; tcbpwm->div = i; tcbpwm->duty = duty; return 0; } static int atmel_tcb_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, const struct pwm_state *state) { int duty_cycle, period; int ret; /* This function only sets a flag in driver data */ atmel_tcb_pwm_set_polarity(chip, pwm, state->polarity); if (!state->enabled) { atmel_tcb_pwm_disable(chip, pwm); return 0; } period = state->period < INT_MAX ? state->period : INT_MAX; duty_cycle = state->duty_cycle < INT_MAX ? state->duty_cycle : INT_MAX; ret = atmel_tcb_pwm_config(chip, pwm, duty_cycle, period); if (ret) return ret; return atmel_tcb_pwm_enable(chip, pwm); } static const struct pwm_ops atmel_tcb_pwm_ops = { .request = atmel_tcb_pwm_request, .free = atmel_tcb_pwm_free, .apply = atmel_tcb_pwm_apply, .owner = THIS_MODULE, }; static struct atmel_tcb_config tcb_rm9200_config = { .counter_width = 16, }; static struct atmel_tcb_config tcb_sam9x5_config = { .counter_width = 32, }; static struct atmel_tcb_config tcb_sama5d2_config = { .counter_width = 32, .has_gclk = 1, }; static const struct of_device_id atmel_tcb_of_match[] = { { .compatible = "atmel,at91rm9200-tcb", .data = &tcb_rm9200_config, }, { .compatible = "atmel,at91sam9x5-tcb", .data = &tcb_sam9x5_config, }, { .compatible = "atmel,sama5d2-tcb", .data = &tcb_sama5d2_config, }, { /* sentinel */ } }; static int atmel_tcb_pwm_probe(struct platform_device *pdev) { const struct of_device_id *match; struct atmel_tcb_pwm_chip *tcbpwm; const struct atmel_tcb_config *config; struct device_node *np = pdev->dev.of_node; struct regmap *regmap; struct clk *clk, *gclk = NULL; struct clk *slow_clk; char clk_name[] = "t0_clk"; int err; int channel; err = of_property_read_u32(np, "reg", &channel); if (err < 0) { dev_err(&pdev->dev, "failed to get Timer Counter Block channel from device tree (error: %d)\n", err); return err; } regmap = syscon_node_to_regmap(np->parent); if (IS_ERR(regmap)) return PTR_ERR(regmap); slow_clk = of_clk_get_by_name(np->parent, "slow_clk"); if (IS_ERR(slow_clk)) return PTR_ERR(slow_clk); clk_name[1] += channel; clk = of_clk_get_by_name(np->parent, clk_name); if (IS_ERR(clk)) clk = of_clk_get_by_name(np->parent, "t0_clk"); if (IS_ERR(clk)) return PTR_ERR(clk); match = of_match_node(atmel_tcb_of_match, np->parent); config = match->data; if (config->has_gclk) { gclk = of_clk_get_by_name(np->parent, "gclk"); if (IS_ERR(gclk)) return PTR_ERR(gclk); } tcbpwm = devm_kzalloc(&pdev->dev, sizeof(*tcbpwm), GFP_KERNEL); if (tcbpwm == NULL) { err = -ENOMEM; goto err_slow_clk; } tcbpwm->chip.dev = &pdev->dev; tcbpwm->chip.ops = &atmel_tcb_pwm_ops; tcbpwm->chip.npwm = NPWM; tcbpwm->channel = channel; tcbpwm->regmap = regmap; tcbpwm->clk = clk; tcbpwm->gclk = gclk; tcbpwm->slow_clk = slow_clk; tcbpwm->width = config->counter_width; err = clk_prepare_enable(slow_clk); if (err) goto err_slow_clk; spin_lock_init(&tcbpwm->lock); err = pwmchip_add(&tcbpwm->chip); if (err < 0) goto err_disable_clk; platform_set_drvdata(pdev, tcbpwm); return 0; err_disable_clk: clk_disable_unprepare(tcbpwm->slow_clk); err_slow_clk: clk_put(slow_clk); return err; } static int atmel_tcb_pwm_remove(struct platform_device *pdev) { struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev); pwmchip_remove(&tcbpwm->chip); clk_disable_unprepare(tcbpwm->slow_clk); clk_put(tcbpwm->slow_clk); clk_put(tcbpwm->clk); return 0; } static const struct of_device_id atmel_tcb_pwm_dt_ids[] = { { .compatible = "atmel,tcb-pwm", }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, atmel_tcb_pwm_dt_ids); #ifdef CONFIG_PM_SLEEP static int atmel_tcb_pwm_suspend(struct device *dev) { struct atmel_tcb_pwm_chip *tcbpwm = dev_get_drvdata(dev); struct atmel_tcb_channel *chan = &tcbpwm->bkup; unsigned int channel = tcbpwm->channel; regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, CMR), &chan->cmr); regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, RA), &chan->ra); regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, RB), &chan->rb); regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, RC), &chan->rc); return 0; } static int atmel_tcb_pwm_resume(struct device *dev) { struct atmel_tcb_pwm_chip *tcbpwm = dev_get_drvdata(dev); struct atmel_tcb_channel *chan = &tcbpwm->bkup; unsigned int channel = tcbpwm->channel; regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, CMR), chan->cmr); regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, RA), chan->ra); regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, RB), chan->rb); regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, RC), chan->rc); if (chan->enabled) regmap_write(tcbpwm->regmap, ATMEL_TC_CLKEN | ATMEL_TC_SWTRG, ATMEL_TC_REG(channel, CCR)); return 0; } #endif static SIMPLE_DEV_PM_OPS(atmel_tcb_pwm_pm_ops, atmel_tcb_pwm_suspend, atmel_tcb_pwm_resume); static struct platform_driver atmel_tcb_pwm_driver = { .driver = { .name = "atmel-tcb-pwm", .of_match_table = atmel_tcb_pwm_dt_ids, .pm = &atmel_tcb_pwm_pm_ops, }, .probe = atmel_tcb_pwm_probe, .remove = atmel_tcb_pwm_remove, }; module_platform_driver(atmel_tcb_pwm_driver); MODULE_AUTHOR("Boris BREZILLON <b.brezillon@overkiz.com>"); MODULE_DESCRIPTION("Atmel Timer Counter Pulse Width Modulation Driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1