Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Philippe De Muyter | 1396 | 32.09% | 1 | 4.76% |
Mylène Josserand | 1004 | 23.08% | 2 | 9.52% |
Alexandre Belloni | 782 | 17.98% | 9 | 42.86% |
Jeremy Gebben | 529 | 12.16% | 2 | 9.52% |
Marek Vašut | 335 | 7.70% | 2 | 9.52% |
Kevin P. Fleming | 302 | 6.94% | 3 | 14.29% |
Bartosz Golaszewski | 1 | 0.02% | 1 | 4.76% |
Mitja Spes | 1 | 0.02% | 1 | 4.76% |
Total | 4350 | 21 |
// SPDX-License-Identifier: GPL-2.0 /* * A driver for the I2C members of the Abracon AB x8xx RTC family, * and compatible: AB 1805 and AB 0805 * * Copyright 2014-2015 Macq S.A. * * Author: Philippe De Muyter <phdm@macqel.be> * Author: Alexandre Belloni <alexandre.belloni@bootlin.com> * */ #include <linux/bcd.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/rtc.h> #include <linux/watchdog.h> #define ABX8XX_REG_HTH 0x00 #define ABX8XX_REG_SC 0x01 #define ABX8XX_REG_MN 0x02 #define ABX8XX_REG_HR 0x03 #define ABX8XX_REG_DA 0x04 #define ABX8XX_REG_MO 0x05 #define ABX8XX_REG_YR 0x06 #define ABX8XX_REG_WD 0x07 #define ABX8XX_REG_AHTH 0x08 #define ABX8XX_REG_ASC 0x09 #define ABX8XX_REG_AMN 0x0a #define ABX8XX_REG_AHR 0x0b #define ABX8XX_REG_ADA 0x0c #define ABX8XX_REG_AMO 0x0d #define ABX8XX_REG_AWD 0x0e #define ABX8XX_REG_STATUS 0x0f #define ABX8XX_STATUS_AF BIT(2) #define ABX8XX_STATUS_BLF BIT(4) #define ABX8XX_STATUS_WDT BIT(6) #define ABX8XX_REG_CTRL1 0x10 #define ABX8XX_CTRL_WRITE BIT(0) #define ABX8XX_CTRL_ARST BIT(2) #define ABX8XX_CTRL_12_24 BIT(6) #define ABX8XX_REG_CTRL2 0x11 #define ABX8XX_CTRL2_RSVD BIT(5) #define ABX8XX_REG_IRQ 0x12 #define ABX8XX_IRQ_AIE BIT(2) #define ABX8XX_IRQ_IM_1_4 (0x3 << 5) #define ABX8XX_REG_CD_TIMER_CTL 0x18 #define ABX8XX_REG_OSC 0x1c #define ABX8XX_OSC_FOS BIT(3) #define ABX8XX_OSC_BOS BIT(4) #define ABX8XX_OSC_ACAL_512 BIT(5) #define ABX8XX_OSC_ACAL_1024 BIT(6) #define ABX8XX_OSC_OSEL BIT(7) #define ABX8XX_REG_OSS 0x1d #define ABX8XX_OSS_OF BIT(1) #define ABX8XX_OSS_OMODE BIT(4) #define ABX8XX_REG_WDT 0x1b #define ABX8XX_WDT_WDS BIT(7) #define ABX8XX_WDT_BMB_MASK 0x7c #define ABX8XX_WDT_BMB_SHIFT 2 #define ABX8XX_WDT_MAX_TIME (ABX8XX_WDT_BMB_MASK >> ABX8XX_WDT_BMB_SHIFT) #define ABX8XX_WDT_WRB_MASK 0x03 #define ABX8XX_WDT_WRB_1HZ 0x02 #define ABX8XX_REG_CFG_KEY 0x1f #define ABX8XX_CFG_KEY_OSC 0xa1 #define ABX8XX_CFG_KEY_MISC 0x9d #define ABX8XX_REG_ID0 0x28 #define ABX8XX_REG_OUT_CTRL 0x30 #define ABX8XX_OUT_CTRL_EXDS BIT(4) #define ABX8XX_REG_TRICKLE 0x20 #define ABX8XX_TRICKLE_CHARGE_ENABLE 0xa0 #define ABX8XX_TRICKLE_STANDARD_DIODE 0x8 #define ABX8XX_TRICKLE_SCHOTTKY_DIODE 0x4 static u8 trickle_resistors[] = {0, 3, 6, 11}; enum abx80x_chip {AB0801, AB0803, AB0804, AB0805, AB1801, AB1803, AB1804, AB1805, RV1805, ABX80X}; struct abx80x_cap { u16 pn; bool has_tc; bool has_wdog; }; static struct abx80x_cap abx80x_caps[] = { [AB0801] = {.pn = 0x0801}, [AB0803] = {.pn = 0x0803}, [AB0804] = {.pn = 0x0804, .has_tc = true, .has_wdog = true}, [AB0805] = {.pn = 0x0805, .has_tc = true, .has_wdog = true}, [AB1801] = {.pn = 0x1801}, [AB1803] = {.pn = 0x1803}, [AB1804] = {.pn = 0x1804, .has_tc = true, .has_wdog = true}, [AB1805] = {.pn = 0x1805, .has_tc = true, .has_wdog = true}, [RV1805] = {.pn = 0x1805, .has_tc = true, .has_wdog = true}, [ABX80X] = {.pn = 0} }; struct abx80x_priv { struct rtc_device *rtc; struct i2c_client *client; struct watchdog_device wdog; }; static int abx80x_write_config_key(struct i2c_client *client, u8 key) { if (i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY, key) < 0) { dev_err(&client->dev, "Unable to write configuration key\n"); return -EIO; } return 0; } static int abx80x_is_rc_mode(struct i2c_client *client) { int flags = 0; flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS); if (flags < 0) { dev_err(&client->dev, "Failed to read autocalibration attribute\n"); return flags; } return (flags & ABX8XX_OSS_OMODE) ? 1 : 0; } static int abx80x_enable_trickle_charger(struct i2c_client *client, u8 trickle_cfg) { int err; /* * Write the configuration key register to enable access to the Trickle * register */ if (abx80x_write_config_key(client, ABX8XX_CFG_KEY_MISC) < 0) return -EIO; err = i2c_smbus_write_byte_data(client, ABX8XX_REG_TRICKLE, ABX8XX_TRICKLE_CHARGE_ENABLE | trickle_cfg); if (err < 0) { dev_err(&client->dev, "Unable to write trickle register\n"); return -EIO; } return 0; } static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm) { struct i2c_client *client = to_i2c_client(dev); unsigned char buf[8]; int err, flags, rc_mode = 0; /* Read the Oscillator Failure only in XT mode */ rc_mode = abx80x_is_rc_mode(client); if (rc_mode < 0) return rc_mode; if (!rc_mode) { flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS); if (flags < 0) return flags; if (flags & ABX8XX_OSS_OF) { dev_err(dev, "Oscillator failure, data is invalid.\n"); return -EINVAL; } } err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_HTH, sizeof(buf), buf); if (err < 0) { dev_err(&client->dev, "Unable to read date\n"); return -EIO; } tm->tm_sec = bcd2bin(buf[ABX8XX_REG_SC] & 0x7F); tm->tm_min = bcd2bin(buf[ABX8XX_REG_MN] & 0x7F); tm->tm_hour = bcd2bin(buf[ABX8XX_REG_HR] & 0x3F); tm->tm_wday = buf[ABX8XX_REG_WD] & 0x7; tm->tm_mday = bcd2bin(buf[ABX8XX_REG_DA] & 0x3F); tm->tm_mon = bcd2bin(buf[ABX8XX_REG_MO] & 0x1F) - 1; tm->tm_year = bcd2bin(buf[ABX8XX_REG_YR]) + 100; return 0; } static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm) { struct i2c_client *client = to_i2c_client(dev); unsigned char buf[8]; int err, flags; if (tm->tm_year < 100) return -EINVAL; buf[ABX8XX_REG_HTH] = 0; buf[ABX8XX_REG_SC] = bin2bcd(tm->tm_sec); buf[ABX8XX_REG_MN] = bin2bcd(tm->tm_min); buf[ABX8XX_REG_HR] = bin2bcd(tm->tm_hour); buf[ABX8XX_REG_DA] = bin2bcd(tm->tm_mday); buf[ABX8XX_REG_MO] = bin2bcd(tm->tm_mon + 1); buf[ABX8XX_REG_YR] = bin2bcd(tm->tm_year - 100); buf[ABX8XX_REG_WD] = tm->tm_wday; err = i2c_smbus_write_i2c_block_data(client, ABX8XX_REG_HTH, sizeof(buf), buf); if (err < 0) { dev_err(&client->dev, "Unable to write to date registers\n"); return -EIO; } /* Clear the OF bit of Oscillator Status Register */ flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS); if (flags < 0) return flags; err = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSS, flags & ~ABX8XX_OSS_OF); if (err < 0) { dev_err(&client->dev, "Unable to write oscillator status register\n"); return err; } return 0; } static irqreturn_t abx80x_handle_irq(int irq, void *dev_id) { struct i2c_client *client = dev_id; struct abx80x_priv *priv = i2c_get_clientdata(client); struct rtc_device *rtc = priv->rtc; int status; status = i2c_smbus_read_byte_data(client, ABX8XX_REG_STATUS); if (status < 0) return IRQ_NONE; if (status & ABX8XX_STATUS_AF) rtc_update_irq(rtc, 1, RTC_AF | RTC_IRQF); /* * It is unclear if we'll get an interrupt before the external * reset kicks in. */ if (status & ABX8XX_STATUS_WDT) dev_alert(&client->dev, "watchdog timeout interrupt.\n"); i2c_smbus_write_byte_data(client, ABX8XX_REG_STATUS, 0); return IRQ_HANDLED; } static int abx80x_read_alarm(struct device *dev, struct rtc_wkalrm *t) { struct i2c_client *client = to_i2c_client(dev); unsigned char buf[7]; int irq_mask, err; if (client->irq <= 0) return -EINVAL; err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_ASC, sizeof(buf), buf); if (err) return err; irq_mask = i2c_smbus_read_byte_data(client, ABX8XX_REG_IRQ); if (irq_mask < 0) return irq_mask; t->time.tm_sec = bcd2bin(buf[0] & 0x7F); t->time.tm_min = bcd2bin(buf[1] & 0x7F); t->time.tm_hour = bcd2bin(buf[2] & 0x3F); t->time.tm_mday = bcd2bin(buf[3] & 0x3F); t->time.tm_mon = bcd2bin(buf[4] & 0x1F) - 1; t->time.tm_wday = buf[5] & 0x7; t->enabled = !!(irq_mask & ABX8XX_IRQ_AIE); t->pending = (buf[6] & ABX8XX_STATUS_AF) && t->enabled; return err; } static int abx80x_set_alarm(struct device *dev, struct rtc_wkalrm *t) { struct i2c_client *client = to_i2c_client(dev); u8 alarm[6]; int err; if (client->irq <= 0) return -EINVAL; alarm[0] = 0x0; alarm[1] = bin2bcd(t->time.tm_sec); alarm[2] = bin2bcd(t->time.tm_min); alarm[3] = bin2bcd(t->time.tm_hour); alarm[4] = bin2bcd(t->time.tm_mday); alarm[5] = bin2bcd(t->time.tm_mon + 1); err = i2c_smbus_write_i2c_block_data(client, ABX8XX_REG_AHTH, sizeof(alarm), alarm); if (err < 0) { dev_err(&client->dev, "Unable to write alarm registers\n"); return -EIO; } if (t->enabled) { err = i2c_smbus_write_byte_data(client, ABX8XX_REG_IRQ, (ABX8XX_IRQ_IM_1_4 | ABX8XX_IRQ_AIE)); if (err) return err; } return 0; } static int abx80x_rtc_set_autocalibration(struct device *dev, int autocalibration) { struct i2c_client *client = to_i2c_client(dev); int retval, flags = 0; if ((autocalibration != 0) && (autocalibration != 1024) && (autocalibration != 512)) { dev_err(dev, "autocalibration value outside permitted range\n"); return -EINVAL; } flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC); if (flags < 0) return flags; if (autocalibration == 0) { flags &= ~(ABX8XX_OSC_ACAL_512 | ABX8XX_OSC_ACAL_1024); } else if (autocalibration == 1024) { /* 1024 autocalibration is 0x10 */ flags |= ABX8XX_OSC_ACAL_1024; flags &= ~(ABX8XX_OSC_ACAL_512); } else { /* 512 autocalibration is 0x11 */ flags |= (ABX8XX_OSC_ACAL_1024 | ABX8XX_OSC_ACAL_512); } /* Unlock write access to Oscillator Control Register */ if (abx80x_write_config_key(client, ABX8XX_CFG_KEY_OSC) < 0) return -EIO; retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC, flags); return retval; } static int abx80x_rtc_get_autocalibration(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); int flags = 0, autocalibration; flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC); if (flags < 0) return flags; if (flags & ABX8XX_OSC_ACAL_512) autocalibration = 512; else if (flags & ABX8XX_OSC_ACAL_1024) autocalibration = 1024; else autocalibration = 0; return autocalibration; } static ssize_t autocalibration_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { int retval; unsigned long autocalibration = 0; retval = kstrtoul(buf, 10, &autocalibration); if (retval < 0) { dev_err(dev, "Failed to store RTC autocalibration attribute\n"); return -EINVAL; } retval = abx80x_rtc_set_autocalibration(dev->parent, autocalibration); return retval ? retval : count; } static ssize_t autocalibration_show(struct device *dev, struct device_attribute *attr, char *buf) { int autocalibration = 0; autocalibration = abx80x_rtc_get_autocalibration(dev->parent); if (autocalibration < 0) { dev_err(dev, "Failed to read RTC autocalibration\n"); sprintf(buf, "0\n"); return autocalibration; } return sprintf(buf, "%d\n", autocalibration); } static DEVICE_ATTR_RW(autocalibration); static ssize_t oscillator_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev->parent); int retval, flags, rc_mode = 0; if (strncmp(buf, "rc", 2) == 0) { rc_mode = 1; } else if (strncmp(buf, "xtal", 4) == 0) { rc_mode = 0; } else { dev_err(dev, "Oscillator selection value outside permitted ones\n"); return -EINVAL; } flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC); if (flags < 0) return flags; if (rc_mode == 0) flags &= ~(ABX8XX_OSC_OSEL); else flags |= (ABX8XX_OSC_OSEL); /* Unlock write access on Oscillator Control register */ if (abx80x_write_config_key(client, ABX8XX_CFG_KEY_OSC) < 0) return -EIO; retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC, flags); if (retval < 0) { dev_err(dev, "Failed to write Oscillator Control register\n"); return retval; } return retval ? retval : count; } static ssize_t oscillator_show(struct device *dev, struct device_attribute *attr, char *buf) { int rc_mode = 0; struct i2c_client *client = to_i2c_client(dev->parent); rc_mode = abx80x_is_rc_mode(client); if (rc_mode < 0) { dev_err(dev, "Failed to read RTC oscillator selection\n"); sprintf(buf, "\n"); return rc_mode; } if (rc_mode) return sprintf(buf, "rc\n"); else return sprintf(buf, "xtal\n"); } static DEVICE_ATTR_RW(oscillator); static struct attribute *rtc_calib_attrs[] = { &dev_attr_autocalibration.attr, &dev_attr_oscillator.attr, NULL, }; static const struct attribute_group rtc_calib_attr_group = { .attrs = rtc_calib_attrs, }; static int abx80x_alarm_irq_enable(struct device *dev, unsigned int enabled) { struct i2c_client *client = to_i2c_client(dev); int err; if (enabled) err = i2c_smbus_write_byte_data(client, ABX8XX_REG_IRQ, (ABX8XX_IRQ_IM_1_4 | ABX8XX_IRQ_AIE)); else err = i2c_smbus_write_byte_data(client, ABX8XX_REG_IRQ, ABX8XX_IRQ_IM_1_4); return err; } static int abx80x_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) { struct i2c_client *client = to_i2c_client(dev); int status, tmp; switch (cmd) { case RTC_VL_READ: status = i2c_smbus_read_byte_data(client, ABX8XX_REG_STATUS); if (status < 0) return status; tmp = status & ABX8XX_STATUS_BLF ? RTC_VL_BACKUP_LOW : 0; return put_user(tmp, (unsigned int __user *)arg); case RTC_VL_CLR: status = i2c_smbus_read_byte_data(client, ABX8XX_REG_STATUS); if (status < 0) return status; status &= ~ABX8XX_STATUS_BLF; tmp = i2c_smbus_write_byte_data(client, ABX8XX_REG_STATUS, 0); if (tmp < 0) return tmp; return 0; default: return -ENOIOCTLCMD; } } static const struct rtc_class_ops abx80x_rtc_ops = { .read_time = abx80x_rtc_read_time, .set_time = abx80x_rtc_set_time, .read_alarm = abx80x_read_alarm, .set_alarm = abx80x_set_alarm, .alarm_irq_enable = abx80x_alarm_irq_enable, .ioctl = abx80x_ioctl, }; static int abx80x_dt_trickle_cfg(struct i2c_client *client) { struct device_node *np = client->dev.of_node; const char *diode; int trickle_cfg = 0; int i, ret; u32 tmp; ret = of_property_read_string(np, "abracon,tc-diode", &diode); if (ret) return ret; if (!strcmp(diode, "standard")) { trickle_cfg |= ABX8XX_TRICKLE_STANDARD_DIODE; } else if (!strcmp(diode, "schottky")) { trickle_cfg |= ABX8XX_TRICKLE_SCHOTTKY_DIODE; } else { dev_dbg(&client->dev, "Invalid tc-diode value: %s\n", diode); return -EINVAL; } ret = of_property_read_u32(np, "abracon,tc-resistor", &tmp); if (ret) return ret; for (i = 0; i < sizeof(trickle_resistors); i++) if (trickle_resistors[i] == tmp) break; if (i == sizeof(trickle_resistors)) { dev_dbg(&client->dev, "Invalid tc-resistor value: %u\n", tmp); return -EINVAL; } return (trickle_cfg | i); } #ifdef CONFIG_WATCHDOG static inline u8 timeout_bits(unsigned int timeout) { return ((timeout << ABX8XX_WDT_BMB_SHIFT) & ABX8XX_WDT_BMB_MASK) | ABX8XX_WDT_WRB_1HZ; } static int __abx80x_wdog_set_timeout(struct watchdog_device *wdog, unsigned int timeout) { struct abx80x_priv *priv = watchdog_get_drvdata(wdog); u8 val = ABX8XX_WDT_WDS | timeout_bits(timeout); /* * Writing any timeout to the WDT register resets the watchdog timer. * Writing 0 disables it. */ return i2c_smbus_write_byte_data(priv->client, ABX8XX_REG_WDT, val); } static int abx80x_wdog_set_timeout(struct watchdog_device *wdog, unsigned int new_timeout) { int err = 0; if (watchdog_hw_running(wdog)) err = __abx80x_wdog_set_timeout(wdog, new_timeout); if (err == 0) wdog->timeout = new_timeout; return err; } static int abx80x_wdog_ping(struct watchdog_device *wdog) { return __abx80x_wdog_set_timeout(wdog, wdog->timeout); } static int abx80x_wdog_start(struct watchdog_device *wdog) { return __abx80x_wdog_set_timeout(wdog, wdog->timeout); } static int abx80x_wdog_stop(struct watchdog_device *wdog) { return __abx80x_wdog_set_timeout(wdog, 0); } static const struct watchdog_info abx80x_wdog_info = { .identity = "abx80x watchdog", .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, }; static const struct watchdog_ops abx80x_wdog_ops = { .owner = THIS_MODULE, .start = abx80x_wdog_start, .stop = abx80x_wdog_stop, .ping = abx80x_wdog_ping, .set_timeout = abx80x_wdog_set_timeout, }; static int abx80x_setup_watchdog(struct abx80x_priv *priv) { priv->wdog.parent = &priv->client->dev; priv->wdog.ops = &abx80x_wdog_ops; priv->wdog.info = &abx80x_wdog_info; priv->wdog.min_timeout = 1; priv->wdog.max_timeout = ABX8XX_WDT_MAX_TIME; priv->wdog.timeout = ABX8XX_WDT_MAX_TIME; watchdog_set_drvdata(&priv->wdog, priv); return devm_watchdog_register_device(&priv->client->dev, &priv->wdog); } #else static int abx80x_setup_watchdog(struct abx80x_priv *priv) { return 0; } #endif static int abx80x_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct device_node *np = client->dev.of_node; struct abx80x_priv *priv; int i, data, err, trickle_cfg = -EINVAL; char buf[7]; unsigned int part = id->driver_data; unsigned int partnumber; unsigned int majrev, minrev; unsigned int lot; unsigned int wafer; unsigned int uid; if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) return -ENODEV; err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_ID0, sizeof(buf), buf); if (err < 0) { dev_err(&client->dev, "Unable to read partnumber\n"); return -EIO; } partnumber = (buf[0] << 8) | buf[1]; majrev = buf[2] >> 3; minrev = buf[2] & 0x7; lot = ((buf[4] & 0x80) << 2) | ((buf[6] & 0x80) << 1) | buf[3]; uid = ((buf[4] & 0x7f) << 8) | buf[5]; wafer = (buf[6] & 0x7c) >> 2; dev_info(&client->dev, "model %04x, revision %u.%u, lot %x, wafer %x, uid %x\n", partnumber, majrev, minrev, lot, wafer, uid); data = i2c_smbus_read_byte_data(client, ABX8XX_REG_CTRL1); if (data < 0) { dev_err(&client->dev, "Unable to read control register\n"); return -EIO; } err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CTRL1, ((data & ~(ABX8XX_CTRL_12_24 | ABX8XX_CTRL_ARST)) | ABX8XX_CTRL_WRITE)); if (err < 0) { dev_err(&client->dev, "Unable to write control register\n"); return -EIO; } /* Configure RV1805 specifics */ if (part == RV1805) { /* * Avoid accidentally entering test mode. This can happen * on the RV1805 in case the reserved bit 5 in control2 * register is set. RV-1805-C3 datasheet indicates that * the bit should be cleared in section 11h - Control2. */ data = i2c_smbus_read_byte_data(client, ABX8XX_REG_CTRL2); if (data < 0) { dev_err(&client->dev, "Unable to read control2 register\n"); return -EIO; } err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CTRL2, data & ~ABX8XX_CTRL2_RSVD); if (err < 0) { dev_err(&client->dev, "Unable to write control2 register\n"); return -EIO; } /* * Avoid extra power leakage. The RV1805 uses smaller * 10pin package and the EXTI input is not present. * Disable it to avoid leakage. */ data = i2c_smbus_read_byte_data(client, ABX8XX_REG_OUT_CTRL); if (data < 0) { dev_err(&client->dev, "Unable to read output control register\n"); return -EIO; } /* * Write the configuration key register to enable access to * the config2 register */ if (abx80x_write_config_key(client, ABX8XX_CFG_KEY_MISC) < 0) return -EIO; err = i2c_smbus_write_byte_data(client, ABX8XX_REG_OUT_CTRL, data | ABX8XX_OUT_CTRL_EXDS); if (err < 0) { dev_err(&client->dev, "Unable to write output control register\n"); return -EIO; } } /* part autodetection */ if (part == ABX80X) { for (i = 0; abx80x_caps[i].pn; i++) if (partnumber == abx80x_caps[i].pn) break; if (abx80x_caps[i].pn == 0) { dev_err(&client->dev, "Unknown part: %04x\n", partnumber); return -EINVAL; } part = i; } if (partnumber != abx80x_caps[part].pn) { dev_err(&client->dev, "partnumber mismatch %04x != %04x\n", partnumber, abx80x_caps[part].pn); return -EINVAL; } if (np && abx80x_caps[part].has_tc) trickle_cfg = abx80x_dt_trickle_cfg(client); if (trickle_cfg > 0) { dev_info(&client->dev, "Enabling trickle charger: %02x\n", trickle_cfg); abx80x_enable_trickle_charger(client, trickle_cfg); } err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CD_TIMER_CTL, BIT(2)); if (err) return err; priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); if (priv == NULL) return -ENOMEM; priv->rtc = devm_rtc_allocate_device(&client->dev); if (IS_ERR(priv->rtc)) return PTR_ERR(priv->rtc); priv->rtc->ops = &abx80x_rtc_ops; priv->client = client; i2c_set_clientdata(client, priv); if (abx80x_caps[part].has_wdog) { err = abx80x_setup_watchdog(priv); if (err) return err; } if (client->irq > 0) { dev_info(&client->dev, "IRQ %d supplied\n", client->irq); err = devm_request_threaded_irq(&client->dev, client->irq, NULL, abx80x_handle_irq, IRQF_SHARED | IRQF_ONESHOT, "abx8xx", client); if (err) { dev_err(&client->dev, "unable to request IRQ, alarms disabled\n"); client->irq = 0; } } err = rtc_add_group(priv->rtc, &rtc_calib_attr_group); if (err) { dev_err(&client->dev, "Failed to create sysfs group: %d\n", err); return err; } return devm_rtc_register_device(priv->rtc); } static const struct i2c_device_id abx80x_id[] = { { "abx80x", ABX80X }, { "ab0801", AB0801 }, { "ab0803", AB0803 }, { "ab0804", AB0804 }, { "ab0805", AB0805 }, { "ab1801", AB1801 }, { "ab1803", AB1803 }, { "ab1804", AB1804 }, { "ab1805", AB1805 }, { "rv1805", RV1805 }, { } }; MODULE_DEVICE_TABLE(i2c, abx80x_id); #ifdef CONFIG_OF static const struct of_device_id abx80x_of_match[] = { { .compatible = "abracon,abx80x", .data = (void *)ABX80X }, { .compatible = "abracon,ab0801", .data = (void *)AB0801 }, { .compatible = "abracon,ab0803", .data = (void *)AB0803 }, { .compatible = "abracon,ab0804", .data = (void *)AB0804 }, { .compatible = "abracon,ab0805", .data = (void *)AB0805 }, { .compatible = "abracon,ab1801", .data = (void *)AB1801 }, { .compatible = "abracon,ab1803", .data = (void *)AB1803 }, { .compatible = "abracon,ab1804", .data = (void *)AB1804 }, { .compatible = "abracon,ab1805", .data = (void *)AB1805 }, { .compatible = "microcrystal,rv1805", .data = (void *)RV1805 }, { } }; MODULE_DEVICE_TABLE(of, abx80x_of_match); #endif static struct i2c_driver abx80x_driver = { .driver = { .name = "rtc-abx80x", .of_match_table = of_match_ptr(abx80x_of_match), }, .probe = abx80x_probe, .id_table = abx80x_id, }; module_i2c_driver(abx80x_driver); MODULE_AUTHOR("Philippe De Muyter <phdm@macqel.be>"); MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>"); MODULE_DESCRIPTION("Abracon ABX80X RTC driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1