Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
James Bottomley | 8271 | 78.04% | 12 | 13.48% |
Dan J Williams | 933 | 8.80% | 20 | 22.47% |
John Garry | 385 | 3.63% | 12 | 13.48% |
Darrick J. Wong | 187 | 1.76% | 6 | 6.74% |
Christoph Hellwig | 149 | 1.41% | 3 | 3.37% |
Tom Peng | 107 | 1.01% | 1 | 1.12% |
FUJITA Tomonori | 86 | 0.81% | 1 | 1.12% |
Luben Tuikov | 65 | 0.61% | 2 | 2.25% |
Jack Wang | 64 | 0.60% | 3 | 3.37% |
Jason Yan | 63 | 0.59% | 8 | 8.99% |
Lukasz Dorau | 57 | 0.54% | 1 | 1.12% |
Jeff Skirvin | 54 | 0.51% | 2 | 2.25% |
Malahal Naineni | 49 | 0.46% | 1 | 1.12% |
Jesper Juhl | 29 | 0.27% | 1 | 1.12% |
Kees Cook | 27 | 0.25% | 2 | 2.25% |
Thomas Jackson | 19 | 0.18% | 1 | 1.12% |
Xiang Chen | 14 | 0.13% | 1 | 1.12% |
Bart Van Assche | 13 | 0.12% | 3 | 3.37% |
Mark Salyzyn | 9 | 0.08% | 2 | 2.25% |
Tejun Heo | 8 | 0.08% | 2 | 2.25% |
Harvey Harrison | 5 | 0.05% | 1 | 1.12% |
Gustavo A. R. Silva | 2 | 0.02% | 1 | 1.12% |
Masanari Iida | 1 | 0.01% | 1 | 1.12% |
Kent Overstreet | 1 | 0.01% | 1 | 1.12% |
John Gong | 1 | 0.01% | 1 | 1.12% |
Total | 10599 | 89 |
// SPDX-License-Identifier: GPL-2.0 /* * Serial Attached SCSI (SAS) Expander discovery and configuration * * Copyright (C) 2005 Adaptec, Inc. All rights reserved. * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> * * This file is licensed under GPLv2. */ #include <linux/scatterlist.h> #include <linux/blkdev.h> #include <linux/slab.h> #include <asm/unaligned.h> #include "sas_internal.h" #include <scsi/sas_ata.h> #include <scsi/scsi_transport.h> #include <scsi/scsi_transport_sas.h> #include "scsi_sas_internal.h" static int sas_discover_expander(struct domain_device *dev); static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr); static int sas_configure_phy(struct domain_device *dev, int phy_id, u8 *sas_addr, int include); static int sas_disable_routing(struct domain_device *dev, u8 *sas_addr); /* ---------- SMP task management ---------- */ static void smp_task_timedout(struct timer_list *t) { struct sas_task_slow *slow = from_timer(slow, t, timer); struct sas_task *task = slow->task; unsigned long flags; spin_lock_irqsave(&task->task_state_lock, flags); if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { task->task_state_flags |= SAS_TASK_STATE_ABORTED; complete(&task->slow_task->completion); } spin_unlock_irqrestore(&task->task_state_lock, flags); } static void smp_task_done(struct sas_task *task) { del_timer(&task->slow_task->timer); complete(&task->slow_task->completion); } /* Give it some long enough timeout. In seconds. */ #define SMP_TIMEOUT 10 static int smp_execute_task_sg(struct domain_device *dev, struct scatterlist *req, struct scatterlist *resp) { int res, retry; struct sas_task *task = NULL; struct sas_internal *i = to_sas_internal(dev->port->ha->core.shost->transportt); mutex_lock(&dev->ex_dev.cmd_mutex); for (retry = 0; retry < 3; retry++) { if (test_bit(SAS_DEV_GONE, &dev->state)) { res = -ECOMM; break; } task = sas_alloc_slow_task(GFP_KERNEL); if (!task) { res = -ENOMEM; break; } task->dev = dev; task->task_proto = dev->tproto; task->smp_task.smp_req = *req; task->smp_task.smp_resp = *resp; task->task_done = smp_task_done; task->slow_task->timer.function = smp_task_timedout; task->slow_task->timer.expires = jiffies + SMP_TIMEOUT*HZ; add_timer(&task->slow_task->timer); res = i->dft->lldd_execute_task(task, GFP_KERNEL); if (res) { del_timer(&task->slow_task->timer); pr_notice("executing SMP task failed:%d\n", res); break; } wait_for_completion(&task->slow_task->completion); res = -ECOMM; if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { pr_notice("smp task timed out or aborted\n"); i->dft->lldd_abort_task(task); if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { pr_notice("SMP task aborted and not done\n"); break; } } if (task->task_status.resp == SAS_TASK_COMPLETE && task->task_status.stat == SAS_SAM_STAT_GOOD) { res = 0; break; } if (task->task_status.resp == SAS_TASK_COMPLETE && task->task_status.stat == SAS_DATA_UNDERRUN) { /* no error, but return the number of bytes of * underrun */ res = task->task_status.residual; break; } if (task->task_status.resp == SAS_TASK_COMPLETE && task->task_status.stat == SAS_DATA_OVERRUN) { res = -EMSGSIZE; break; } if (task->task_status.resp == SAS_TASK_UNDELIVERED && task->task_status.stat == SAS_DEVICE_UNKNOWN) break; else { pr_notice("%s: task to dev %016llx response: 0x%x status 0x%x\n", __func__, SAS_ADDR(dev->sas_addr), task->task_status.resp, task->task_status.stat); sas_free_task(task); task = NULL; } } mutex_unlock(&dev->ex_dev.cmd_mutex); BUG_ON(retry == 3 && task != NULL); sas_free_task(task); return res; } static int smp_execute_task(struct domain_device *dev, void *req, int req_size, void *resp, int resp_size) { struct scatterlist req_sg; struct scatterlist resp_sg; sg_init_one(&req_sg, req, req_size); sg_init_one(&resp_sg, resp, resp_size); return smp_execute_task_sg(dev, &req_sg, &resp_sg); } /* ---------- Allocations ---------- */ static inline void *alloc_smp_req(int size) { u8 *p = kzalloc(size, GFP_KERNEL); if (p) p[0] = SMP_REQUEST; return p; } static inline void *alloc_smp_resp(int size) { return kzalloc(size, GFP_KERNEL); } static char sas_route_char(struct domain_device *dev, struct ex_phy *phy) { switch (phy->routing_attr) { case TABLE_ROUTING: if (dev->ex_dev.t2t_supp) return 'U'; else return 'T'; case DIRECT_ROUTING: return 'D'; case SUBTRACTIVE_ROUTING: return 'S'; default: return '?'; } } static enum sas_device_type to_dev_type(struct discover_resp *dr) { /* This is detecting a failure to transmit initial dev to host * FIS as described in section J.5 of sas-2 r16 */ if (dr->attached_dev_type == SAS_PHY_UNUSED && dr->attached_sata_dev && dr->linkrate >= SAS_LINK_RATE_1_5_GBPS) return SAS_SATA_PENDING; else return dr->attached_dev_type; } static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) { enum sas_device_type dev_type; enum sas_linkrate linkrate; u8 sas_addr[SAS_ADDR_SIZE]; struct smp_resp *resp = rsp; struct discover_resp *dr = &resp->disc; struct sas_ha_struct *ha = dev->port->ha; struct expander_device *ex = &dev->ex_dev; struct ex_phy *phy = &ex->ex_phy[phy_id]; struct sas_rphy *rphy = dev->rphy; bool new_phy = !phy->phy; char *type; if (new_phy) { if (WARN_ON_ONCE(test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state))) return; phy->phy = sas_phy_alloc(&rphy->dev, phy_id); /* FIXME: error_handling */ BUG_ON(!phy->phy); } switch (resp->result) { case SMP_RESP_PHY_VACANT: phy->phy_state = PHY_VACANT; break; default: phy->phy_state = PHY_NOT_PRESENT; break; case SMP_RESP_FUNC_ACC: phy->phy_state = PHY_EMPTY; /* do not know yet */ break; } /* check if anything important changed to squelch debug */ dev_type = phy->attached_dev_type; linkrate = phy->linkrate; memcpy(sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); /* Handle vacant phy - rest of dr data is not valid so skip it */ if (phy->phy_state == PHY_VACANT) { memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE); phy->attached_dev_type = SAS_PHY_UNUSED; if (!test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) { phy->phy_id = phy_id; goto skip; } else goto out; } phy->attached_dev_type = to_dev_type(dr); if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) goto out; phy->phy_id = phy_id; phy->linkrate = dr->linkrate; phy->attached_sata_host = dr->attached_sata_host; phy->attached_sata_dev = dr->attached_sata_dev; phy->attached_sata_ps = dr->attached_sata_ps; phy->attached_iproto = dr->iproto << 1; phy->attached_tproto = dr->tproto << 1; /* help some expanders that fail to zero sas_address in the 'no * device' case */ if (phy->attached_dev_type == SAS_PHY_UNUSED || phy->linkrate < SAS_LINK_RATE_1_5_GBPS) memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE); else memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE); phy->attached_phy_id = dr->attached_phy_id; phy->phy_change_count = dr->change_count; phy->routing_attr = dr->routing_attr; phy->virtual = dr->virtual; phy->last_da_index = -1; phy->phy->identify.sas_address = SAS_ADDR(phy->attached_sas_addr); phy->phy->identify.device_type = dr->attached_dev_type; phy->phy->identify.initiator_port_protocols = phy->attached_iproto; phy->phy->identify.target_port_protocols = phy->attached_tproto; if (!phy->attached_tproto && dr->attached_sata_dev) phy->phy->identify.target_port_protocols = SAS_PROTOCOL_SATA; phy->phy->identify.phy_identifier = phy_id; phy->phy->minimum_linkrate_hw = dr->hmin_linkrate; phy->phy->maximum_linkrate_hw = dr->hmax_linkrate; phy->phy->minimum_linkrate = dr->pmin_linkrate; phy->phy->maximum_linkrate = dr->pmax_linkrate; phy->phy->negotiated_linkrate = phy->linkrate; phy->phy->enabled = (phy->linkrate != SAS_PHY_DISABLED); skip: if (new_phy) if (sas_phy_add(phy->phy)) { sas_phy_free(phy->phy); return; } out: switch (phy->attached_dev_type) { case SAS_SATA_PENDING: type = "stp pending"; break; case SAS_PHY_UNUSED: type = "no device"; break; case SAS_END_DEVICE: if (phy->attached_iproto) { if (phy->attached_tproto) type = "host+target"; else type = "host"; } else { if (dr->attached_sata_dev) type = "stp"; else type = "ssp"; } break; case SAS_EDGE_EXPANDER_DEVICE: case SAS_FANOUT_EXPANDER_DEVICE: type = "smp"; break; default: type = "unknown"; } /* this routine is polled by libata error recovery so filter * unimportant messages */ if (new_phy || phy->attached_dev_type != dev_type || phy->linkrate != linkrate || SAS_ADDR(phy->attached_sas_addr) != SAS_ADDR(sas_addr)) /* pass */; else return; /* if the attached device type changed and ata_eh is active, * make sure we run revalidation when eh completes (see: * sas_enable_revalidation) */ if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) set_bit(DISCE_REVALIDATE_DOMAIN, &dev->port->disc.pending); pr_debug("%sex %016llx phy%02d:%c:%X attached: %016llx (%s)\n", test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state) ? "ata: " : "", SAS_ADDR(dev->sas_addr), phy->phy_id, sas_route_char(dev, phy), phy->linkrate, SAS_ADDR(phy->attached_sas_addr), type); } /* check if we have an existing attached ata device on this expander phy */ struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id) { struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy_id]; struct domain_device *dev; struct sas_rphy *rphy; if (!ex_phy->port) return NULL; rphy = ex_phy->port->rphy; if (!rphy) return NULL; dev = sas_find_dev_by_rphy(rphy); if (dev && dev_is_sata(dev)) return dev; return NULL; } #define DISCOVER_REQ_SIZE 16 #define DISCOVER_RESP_SIZE 56 static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req, u8 *disc_resp, int single) { struct discover_resp *dr; int res; disc_req[9] = single; res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE, disc_resp, DISCOVER_RESP_SIZE); if (res) return res; dr = &((struct smp_resp *)disc_resp)->disc; if (memcmp(dev->sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE) == 0) { pr_notice("Found loopback topology, just ignore it!\n"); return 0; } sas_set_ex_phy(dev, single, disc_resp); return 0; } int sas_ex_phy_discover(struct domain_device *dev, int single) { struct expander_device *ex = &dev->ex_dev; int res = 0; u8 *disc_req; u8 *disc_resp; disc_req = alloc_smp_req(DISCOVER_REQ_SIZE); if (!disc_req) return -ENOMEM; disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE); if (!disc_resp) { kfree(disc_req); return -ENOMEM; } disc_req[1] = SMP_DISCOVER; if (0 <= single && single < ex->num_phys) { res = sas_ex_phy_discover_helper(dev, disc_req, disc_resp, single); } else { int i; for (i = 0; i < ex->num_phys; i++) { res = sas_ex_phy_discover_helper(dev, disc_req, disc_resp, i); if (res) goto out_err; } } out_err: kfree(disc_resp); kfree(disc_req); return res; } static int sas_expander_discover(struct domain_device *dev) { struct expander_device *ex = &dev->ex_dev; int res; ex->ex_phy = kcalloc(ex->num_phys, sizeof(*ex->ex_phy), GFP_KERNEL); if (!ex->ex_phy) return -ENOMEM; res = sas_ex_phy_discover(dev, -1); if (res) goto out_err; return 0; out_err: kfree(ex->ex_phy); ex->ex_phy = NULL; return res; } #define MAX_EXPANDER_PHYS 128 static void ex_assign_report_general(struct domain_device *dev, struct smp_resp *resp) { struct report_general_resp *rg = &resp->rg; dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count); dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes); dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS); dev->ex_dev.t2t_supp = rg->t2t_supp; dev->ex_dev.conf_route_table = rg->conf_route_table; dev->ex_dev.configuring = rg->configuring; memcpy(dev->ex_dev.enclosure_logical_id, rg->enclosure_logical_id, 8); } #define RG_REQ_SIZE 8 #define RG_RESP_SIZE 32 static int sas_ex_general(struct domain_device *dev) { u8 *rg_req; struct smp_resp *rg_resp; int res; int i; rg_req = alloc_smp_req(RG_REQ_SIZE); if (!rg_req) return -ENOMEM; rg_resp = alloc_smp_resp(RG_RESP_SIZE); if (!rg_resp) { kfree(rg_req); return -ENOMEM; } rg_req[1] = SMP_REPORT_GENERAL; for (i = 0; i < 5; i++) { res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp, RG_RESP_SIZE); if (res) { pr_notice("RG to ex %016llx failed:0x%x\n", SAS_ADDR(dev->sas_addr), res); goto out; } else if (rg_resp->result != SMP_RESP_FUNC_ACC) { pr_debug("RG:ex %016llx returned SMP result:0x%x\n", SAS_ADDR(dev->sas_addr), rg_resp->result); res = rg_resp->result; goto out; } ex_assign_report_general(dev, rg_resp); if (dev->ex_dev.configuring) { pr_debug("RG: ex %016llx self-configuring...\n", SAS_ADDR(dev->sas_addr)); schedule_timeout_interruptible(5*HZ); } else break; } out: kfree(rg_req); kfree(rg_resp); return res; } static void ex_assign_manuf_info(struct domain_device *dev, void *_mi_resp) { u8 *mi_resp = _mi_resp; struct sas_rphy *rphy = dev->rphy; struct sas_expander_device *edev = rphy_to_expander_device(rphy); memcpy(edev->vendor_id, mi_resp + 12, SAS_EXPANDER_VENDOR_ID_LEN); memcpy(edev->product_id, mi_resp + 20, SAS_EXPANDER_PRODUCT_ID_LEN); memcpy(edev->product_rev, mi_resp + 36, SAS_EXPANDER_PRODUCT_REV_LEN); if (mi_resp[8] & 1) { memcpy(edev->component_vendor_id, mi_resp + 40, SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN); edev->component_id = mi_resp[48] << 8 | mi_resp[49]; edev->component_revision_id = mi_resp[50]; } } #define MI_REQ_SIZE 8 #define MI_RESP_SIZE 64 static int sas_ex_manuf_info(struct domain_device *dev) { u8 *mi_req; u8 *mi_resp; int res; mi_req = alloc_smp_req(MI_REQ_SIZE); if (!mi_req) return -ENOMEM; mi_resp = alloc_smp_resp(MI_RESP_SIZE); if (!mi_resp) { kfree(mi_req); return -ENOMEM; } mi_req[1] = SMP_REPORT_MANUF_INFO; res = smp_execute_task(dev, mi_req, MI_REQ_SIZE, mi_resp, MI_RESP_SIZE); if (res) { pr_notice("MI: ex %016llx failed:0x%x\n", SAS_ADDR(dev->sas_addr), res); goto out; } else if (mi_resp[2] != SMP_RESP_FUNC_ACC) { pr_debug("MI ex %016llx returned SMP result:0x%x\n", SAS_ADDR(dev->sas_addr), mi_resp[2]); goto out; } ex_assign_manuf_info(dev, mi_resp); out: kfree(mi_req); kfree(mi_resp); return res; } #define PC_REQ_SIZE 44 #define PC_RESP_SIZE 8 int sas_smp_phy_control(struct domain_device *dev, int phy_id, enum phy_func phy_func, struct sas_phy_linkrates *rates) { u8 *pc_req; u8 *pc_resp; int res; pc_req = alloc_smp_req(PC_REQ_SIZE); if (!pc_req) return -ENOMEM; pc_resp = alloc_smp_resp(PC_RESP_SIZE); if (!pc_resp) { kfree(pc_req); return -ENOMEM; } pc_req[1] = SMP_PHY_CONTROL; pc_req[9] = phy_id; pc_req[10] = phy_func; if (rates) { pc_req[32] = rates->minimum_linkrate << 4; pc_req[33] = rates->maximum_linkrate << 4; } res = smp_execute_task(dev, pc_req, PC_REQ_SIZE, pc_resp, PC_RESP_SIZE); if (res) { pr_err("ex %016llx phy%02d PHY control failed: %d\n", SAS_ADDR(dev->sas_addr), phy_id, res); } else if (pc_resp[2] != SMP_RESP_FUNC_ACC) { pr_err("ex %016llx phy%02d PHY control failed: function result 0x%x\n", SAS_ADDR(dev->sas_addr), phy_id, pc_resp[2]); res = pc_resp[2]; } kfree(pc_resp); kfree(pc_req); return res; } static void sas_ex_disable_phy(struct domain_device *dev, int phy_id) { struct expander_device *ex = &dev->ex_dev; struct ex_phy *phy = &ex->ex_phy[phy_id]; sas_smp_phy_control(dev, phy_id, PHY_FUNC_DISABLE, NULL); phy->linkrate = SAS_PHY_DISABLED; } static void sas_ex_disable_port(struct domain_device *dev, u8 *sas_addr) { struct expander_device *ex = &dev->ex_dev; int i; for (i = 0; i < ex->num_phys; i++) { struct ex_phy *phy = &ex->ex_phy[i]; if (phy->phy_state == PHY_VACANT || phy->phy_state == PHY_NOT_PRESENT) continue; if (SAS_ADDR(phy->attached_sas_addr) == SAS_ADDR(sas_addr)) sas_ex_disable_phy(dev, i); } } static int sas_dev_present_in_domain(struct asd_sas_port *port, u8 *sas_addr) { struct domain_device *dev; if (SAS_ADDR(port->sas_addr) == SAS_ADDR(sas_addr)) return 1; list_for_each_entry(dev, &port->dev_list, dev_list_node) { if (SAS_ADDR(dev->sas_addr) == SAS_ADDR(sas_addr)) return 1; } return 0; } #define RPEL_REQ_SIZE 16 #define RPEL_RESP_SIZE 32 int sas_smp_get_phy_events(struct sas_phy *phy) { int res; u8 *req; u8 *resp; struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent); struct domain_device *dev = sas_find_dev_by_rphy(rphy); req = alloc_smp_req(RPEL_REQ_SIZE); if (!req) return -ENOMEM; resp = alloc_smp_resp(RPEL_RESP_SIZE); if (!resp) { kfree(req); return -ENOMEM; } req[1] = SMP_REPORT_PHY_ERR_LOG; req[9] = phy->number; res = smp_execute_task(dev, req, RPEL_REQ_SIZE, resp, RPEL_RESP_SIZE); if (res) goto out; phy->invalid_dword_count = get_unaligned_be32(&resp[12]); phy->running_disparity_error_count = get_unaligned_be32(&resp[16]); phy->loss_of_dword_sync_count = get_unaligned_be32(&resp[20]); phy->phy_reset_problem_count = get_unaligned_be32(&resp[24]); out: kfree(req); kfree(resp); return res; } #ifdef CONFIG_SCSI_SAS_ATA #define RPS_REQ_SIZE 16 #define RPS_RESP_SIZE 60 int sas_get_report_phy_sata(struct domain_device *dev, int phy_id, struct smp_resp *rps_resp) { int res; u8 *rps_req = alloc_smp_req(RPS_REQ_SIZE); u8 *resp = (u8 *)rps_resp; if (!rps_req) return -ENOMEM; rps_req[1] = SMP_REPORT_PHY_SATA; rps_req[9] = phy_id; res = smp_execute_task(dev, rps_req, RPS_REQ_SIZE, rps_resp, RPS_RESP_SIZE); /* 0x34 is the FIS type for the D2H fis. There's a potential * standards cockup here. sas-2 explicitly specifies the FIS * should be encoded so that FIS type is in resp[24]. * However, some expanders endian reverse this. Undo the * reversal here */ if (!res && resp[27] == 0x34 && resp[24] != 0x34) { int i; for (i = 0; i < 5; i++) { int j = 24 + (i*4); u8 a, b; a = resp[j + 0]; b = resp[j + 1]; resp[j + 0] = resp[j + 3]; resp[j + 1] = resp[j + 2]; resp[j + 2] = b; resp[j + 3] = a; } } kfree(rps_req); return res; } #endif static void sas_ex_get_linkrate(struct domain_device *parent, struct domain_device *child, struct ex_phy *parent_phy) { struct expander_device *parent_ex = &parent->ex_dev; struct sas_port *port; int i; child->pathways = 0; port = parent_phy->port; for (i = 0; i < parent_ex->num_phys; i++) { struct ex_phy *phy = &parent_ex->ex_phy[i]; if (phy->phy_state == PHY_VACANT || phy->phy_state == PHY_NOT_PRESENT) continue; if (SAS_ADDR(phy->attached_sas_addr) == SAS_ADDR(child->sas_addr)) { child->min_linkrate = min(parent->min_linkrate, phy->linkrate); child->max_linkrate = max(parent->max_linkrate, phy->linkrate); child->pathways++; sas_port_add_phy(port, phy->phy); } } child->linkrate = min(parent_phy->linkrate, child->max_linkrate); child->pathways = min(child->pathways, parent->pathways); } static struct domain_device *sas_ex_discover_end_dev( struct domain_device *parent, int phy_id) { struct expander_device *parent_ex = &parent->ex_dev; struct ex_phy *phy = &parent_ex->ex_phy[phy_id]; struct domain_device *child = NULL; struct sas_rphy *rphy; int res; if (phy->attached_sata_host || phy->attached_sata_ps) return NULL; child = sas_alloc_device(); if (!child) return NULL; kref_get(&parent->kref); child->parent = parent; child->port = parent->port; child->iproto = phy->attached_iproto; memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); sas_hash_addr(child->hashed_sas_addr, child->sas_addr); if (!phy->port) { phy->port = sas_port_alloc(&parent->rphy->dev, phy_id); if (unlikely(!phy->port)) goto out_err; if (unlikely(sas_port_add(phy->port) != 0)) { sas_port_free(phy->port); goto out_err; } } sas_ex_get_linkrate(parent, child, phy); sas_device_set_phy(child, phy->port); #ifdef CONFIG_SCSI_SAS_ATA if ((phy->attached_tproto & SAS_PROTOCOL_STP) || phy->attached_sata_dev) { if (child->linkrate > parent->min_linkrate) { struct sas_phy *cphy = child->phy; enum sas_linkrate min_prate = cphy->minimum_linkrate, parent_min_lrate = parent->min_linkrate, min_linkrate = (min_prate > parent_min_lrate) ? parent_min_lrate : 0; struct sas_phy_linkrates rates = { .maximum_linkrate = parent->min_linkrate, .minimum_linkrate = min_linkrate, }; int ret; pr_notice("ex %016llx phy%02d SATA device linkrate > min pathway connection rate, attempting to lower device linkrate\n", SAS_ADDR(child->sas_addr), phy_id); ret = sas_smp_phy_control(parent, phy_id, PHY_FUNC_LINK_RESET, &rates); if (ret) { pr_err("ex %016llx phy%02d SATA device could not set linkrate (%d)\n", SAS_ADDR(child->sas_addr), phy_id, ret); goto out_free; } pr_notice("ex %016llx phy%02d SATA device set linkrate successfully\n", SAS_ADDR(child->sas_addr), phy_id); child->linkrate = child->min_linkrate; } res = sas_get_ata_info(child, phy); if (res) goto out_free; sas_init_dev(child); res = sas_ata_init(child); if (res) goto out_free; rphy = sas_end_device_alloc(phy->port); if (!rphy) goto out_free; rphy->identify.phy_identifier = phy_id; child->rphy = rphy; get_device(&rphy->dev); list_add_tail(&child->disco_list_node, &parent->port->disco_list); res = sas_discover_sata(child); if (res) { pr_notice("sas_discover_sata() for device %16llx at %016llx:%02d returned 0x%x\n", SAS_ADDR(child->sas_addr), SAS_ADDR(parent->sas_addr), phy_id, res); goto out_list_del; } } else #endif if (phy->attached_tproto & SAS_PROTOCOL_SSP) { child->dev_type = SAS_END_DEVICE; rphy = sas_end_device_alloc(phy->port); /* FIXME: error handling */ if (unlikely(!rphy)) goto out_free; child->tproto = phy->attached_tproto; sas_init_dev(child); child->rphy = rphy; get_device(&rphy->dev); rphy->identify.phy_identifier = phy_id; sas_fill_in_rphy(child, rphy); list_add_tail(&child->disco_list_node, &parent->port->disco_list); res = sas_discover_end_dev(child); if (res) { pr_notice("sas_discover_end_dev() for device %016llx at %016llx:%02d returned 0x%x\n", SAS_ADDR(child->sas_addr), SAS_ADDR(parent->sas_addr), phy_id, res); goto out_list_del; } } else { pr_notice("target proto 0x%x at %016llx:0x%x not handled\n", phy->attached_tproto, SAS_ADDR(parent->sas_addr), phy_id); goto out_free; } list_add_tail(&child->siblings, &parent_ex->children); return child; out_list_del: sas_rphy_free(child->rphy); list_del(&child->disco_list_node); spin_lock_irq(&parent->port->dev_list_lock); list_del(&child->dev_list_node); spin_unlock_irq(&parent->port->dev_list_lock); out_free: sas_port_delete(phy->port); out_err: phy->port = NULL; sas_put_device(child); return NULL; } /* See if this phy is part of a wide port */ static bool sas_ex_join_wide_port(struct domain_device *parent, int phy_id) { struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id]; int i; for (i = 0; i < parent->ex_dev.num_phys; i++) { struct ex_phy *ephy = &parent->ex_dev.ex_phy[i]; if (ephy == phy) continue; if (!memcmp(phy->attached_sas_addr, ephy->attached_sas_addr, SAS_ADDR_SIZE) && ephy->port) { sas_port_add_phy(ephy->port, phy->phy); phy->port = ephy->port; phy->phy_state = PHY_DEVICE_DISCOVERED; return true; } } return false; } static struct domain_device *sas_ex_discover_expander( struct domain_device *parent, int phy_id) { struct sas_expander_device *parent_ex = rphy_to_expander_device(parent->rphy); struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id]; struct domain_device *child = NULL; struct sas_rphy *rphy; struct sas_expander_device *edev; struct asd_sas_port *port; int res; if (phy->routing_attr == DIRECT_ROUTING) { pr_warn("ex %016llx:%02d:D <--> ex %016llx:0x%x is not allowed\n", SAS_ADDR(parent->sas_addr), phy_id, SAS_ADDR(phy->attached_sas_addr), phy->attached_phy_id); return NULL; } child = sas_alloc_device(); if (!child) return NULL; phy->port = sas_port_alloc(&parent->rphy->dev, phy_id); /* FIXME: better error handling */ BUG_ON(sas_port_add(phy->port) != 0); switch (phy->attached_dev_type) { case SAS_EDGE_EXPANDER_DEVICE: rphy = sas_expander_alloc(phy->port, SAS_EDGE_EXPANDER_DEVICE); break; case SAS_FANOUT_EXPANDER_DEVICE: rphy = sas_expander_alloc(phy->port, SAS_FANOUT_EXPANDER_DEVICE); break; default: rphy = NULL; /* shut gcc up */ BUG(); } port = parent->port; child->rphy = rphy; get_device(&rphy->dev); edev = rphy_to_expander_device(rphy); child->dev_type = phy->attached_dev_type; kref_get(&parent->kref); child->parent = parent; child->port = port; child->iproto = phy->attached_iproto; child->tproto = phy->attached_tproto; memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); sas_hash_addr(child->hashed_sas_addr, child->sas_addr); sas_ex_get_linkrate(parent, child, phy); edev->level = parent_ex->level + 1; parent->port->disc.max_level = max(parent->port->disc.max_level, edev->level); sas_init_dev(child); sas_fill_in_rphy(child, rphy); sas_rphy_add(rphy); spin_lock_irq(&parent->port->dev_list_lock); list_add_tail(&child->dev_list_node, &parent->port->dev_list); spin_unlock_irq(&parent->port->dev_list_lock); res = sas_discover_expander(child); if (res) { sas_rphy_delete(rphy); spin_lock_irq(&parent->port->dev_list_lock); list_del(&child->dev_list_node); spin_unlock_irq(&parent->port->dev_list_lock); sas_put_device(child); sas_port_delete(phy->port); phy->port = NULL; return NULL; } list_add_tail(&child->siblings, &parent->ex_dev.children); return child; } static int sas_ex_discover_dev(struct domain_device *dev, int phy_id) { struct expander_device *ex = &dev->ex_dev; struct ex_phy *ex_phy = &ex->ex_phy[phy_id]; struct domain_device *child = NULL; int res = 0; /* Phy state */ if (ex_phy->linkrate == SAS_SATA_SPINUP_HOLD) { if (!sas_smp_phy_control(dev, phy_id, PHY_FUNC_LINK_RESET, NULL)) res = sas_ex_phy_discover(dev, phy_id); if (res) return res; } /* Parent and domain coherency */ if (!dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) == SAS_ADDR(dev->port->sas_addr))) { sas_add_parent_port(dev, phy_id); return 0; } if (dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) == SAS_ADDR(dev->parent->sas_addr))) { sas_add_parent_port(dev, phy_id); if (ex_phy->routing_attr == TABLE_ROUTING) sas_configure_phy(dev, phy_id, dev->port->sas_addr, 1); return 0; } if (sas_dev_present_in_domain(dev->port, ex_phy->attached_sas_addr)) sas_ex_disable_port(dev, ex_phy->attached_sas_addr); if (ex_phy->attached_dev_type == SAS_PHY_UNUSED) { if (ex_phy->routing_attr == DIRECT_ROUTING) { memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE); sas_configure_routing(dev, ex_phy->attached_sas_addr); } return 0; } else if (ex_phy->linkrate == SAS_LINK_RATE_UNKNOWN) return 0; if (ex_phy->attached_dev_type != SAS_END_DEVICE && ex_phy->attached_dev_type != SAS_FANOUT_EXPANDER_DEVICE && ex_phy->attached_dev_type != SAS_EDGE_EXPANDER_DEVICE && ex_phy->attached_dev_type != SAS_SATA_PENDING) { pr_warn("unknown device type(0x%x) attached to ex %016llx phy%02d\n", ex_phy->attached_dev_type, SAS_ADDR(dev->sas_addr), phy_id); return 0; } res = sas_configure_routing(dev, ex_phy->attached_sas_addr); if (res) { pr_notice("configure routing for dev %016llx reported 0x%x. Forgotten\n", SAS_ADDR(ex_phy->attached_sas_addr), res); sas_disable_routing(dev, ex_phy->attached_sas_addr); return res; } if (sas_ex_join_wide_port(dev, phy_id)) { pr_debug("Attaching ex phy%02d to wide port %016llx\n", phy_id, SAS_ADDR(ex_phy->attached_sas_addr)); return res; } switch (ex_phy->attached_dev_type) { case SAS_END_DEVICE: case SAS_SATA_PENDING: child = sas_ex_discover_end_dev(dev, phy_id); break; case SAS_FANOUT_EXPANDER_DEVICE: if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) { pr_debug("second fanout expander %016llx phy%02d attached to ex %016llx phy%02d\n", SAS_ADDR(ex_phy->attached_sas_addr), ex_phy->attached_phy_id, SAS_ADDR(dev->sas_addr), phy_id); sas_ex_disable_phy(dev, phy_id); return res; } else memcpy(dev->port->disc.fanout_sas_addr, ex_phy->attached_sas_addr, SAS_ADDR_SIZE); fallthrough; case SAS_EDGE_EXPANDER_DEVICE: child = sas_ex_discover_expander(dev, phy_id); break; default: break; } if (!child) pr_notice("ex %016llx phy%02d failed to discover\n", SAS_ADDR(dev->sas_addr), phy_id); return res; } static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr) { struct expander_device *ex = &dev->ex_dev; int i; for (i = 0; i < ex->num_phys; i++) { struct ex_phy *phy = &ex->ex_phy[i]; if (phy->phy_state == PHY_VACANT || phy->phy_state == PHY_NOT_PRESENT) continue; if (dev_is_expander(phy->attached_dev_type) && phy->routing_attr == SUBTRACTIVE_ROUTING) { memcpy(sub_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); return 1; } } return 0; } static int sas_check_level_subtractive_boundary(struct domain_device *dev) { struct expander_device *ex = &dev->ex_dev; struct domain_device *child; u8 sub_addr[SAS_ADDR_SIZE] = {0, }; list_for_each_entry(child, &ex->children, siblings) { if (!dev_is_expander(child->dev_type)) continue; if (sub_addr[0] == 0) { sas_find_sub_addr(child, sub_addr); continue; } else { u8 s2[SAS_ADDR_SIZE]; if (sas_find_sub_addr(child, s2) && (SAS_ADDR(sub_addr) != SAS_ADDR(s2))) { pr_notice("ex %016llx->%016llx-?->%016llx diverges from subtractive boundary %016llx\n", SAS_ADDR(dev->sas_addr), SAS_ADDR(child->sas_addr), SAS_ADDR(s2), SAS_ADDR(sub_addr)); sas_ex_disable_port(child, s2); } } } return 0; } /** * sas_ex_discover_devices - discover devices attached to this expander * @dev: pointer to the expander domain device * @single: if you want to do a single phy, else set to -1; * * Configure this expander for use with its devices and register the * devices of this expander. */ static int sas_ex_discover_devices(struct domain_device *dev, int single) { struct expander_device *ex = &dev->ex_dev; int i = 0, end = ex->num_phys; int res = 0; if (0 <= single && single < end) { i = single; end = i+1; } for ( ; i < end; i++) { struct ex_phy *ex_phy = &ex->ex_phy[i]; if (ex_phy->phy_state == PHY_VACANT || ex_phy->phy_state == PHY_NOT_PRESENT || ex_phy->phy_state == PHY_DEVICE_DISCOVERED) continue; switch (ex_phy->linkrate) { case SAS_PHY_DISABLED: case SAS_PHY_RESET_PROBLEM: case SAS_SATA_PORT_SELECTOR: continue; default: res = sas_ex_discover_dev(dev, i); if (res) break; continue; } } if (!res) sas_check_level_subtractive_boundary(dev); return res; } static int sas_check_ex_subtractive_boundary(struct domain_device *dev) { struct expander_device *ex = &dev->ex_dev; int i; u8 *sub_sas_addr = NULL; if (dev->dev_type != SAS_EDGE_EXPANDER_DEVICE) return 0; for (i = 0; i < ex->num_phys; i++) { struct ex_phy *phy = &ex->ex_phy[i]; if (phy->phy_state == PHY_VACANT || phy->phy_state == PHY_NOT_PRESENT) continue; if (dev_is_expander(phy->attached_dev_type) && phy->routing_attr == SUBTRACTIVE_ROUTING) { if (!sub_sas_addr) sub_sas_addr = &phy->attached_sas_addr[0]; else if (SAS_ADDR(sub_sas_addr) != SAS_ADDR(phy->attached_sas_addr)) { pr_notice("ex %016llx phy%02d diverges(%016llx) on subtractive boundary(%016llx). Disabled\n", SAS_ADDR(dev->sas_addr), i, SAS_ADDR(phy->attached_sas_addr), SAS_ADDR(sub_sas_addr)); sas_ex_disable_phy(dev, i); } } } return 0; } static void sas_print_parent_topology_bug(struct domain_device *child, struct ex_phy *parent_phy, struct ex_phy *child_phy) { static const char *ex_type[] = { [SAS_EDGE_EXPANDER_DEVICE] = "edge", [SAS_FANOUT_EXPANDER_DEVICE] = "fanout", }; struct domain_device *parent = child->parent; pr_notice("%s ex %016llx phy%02d <--> %s ex %016llx phy%02d has %c:%c routing link!\n", ex_type[parent->dev_type], SAS_ADDR(parent->sas_addr), parent_phy->phy_id, ex_type[child->dev_type], SAS_ADDR(child->sas_addr), child_phy->phy_id, sas_route_char(parent, parent_phy), sas_route_char(child, child_phy)); } static int sas_check_eeds(struct domain_device *child, struct ex_phy *parent_phy, struct ex_phy *child_phy) { int res = 0; struct domain_device *parent = child->parent; if (SAS_ADDR(parent->port->disc.fanout_sas_addr) != 0) { res = -ENODEV; pr_warn("edge ex %016llx phy S:%02d <--> edge ex %016llx phy S:%02d, while there is a fanout ex %016llx\n", SAS_ADDR(parent->sas_addr), parent_phy->phy_id, SAS_ADDR(child->sas_addr), child_phy->phy_id, SAS_ADDR(parent->port->disc.fanout_sas_addr)); } else if (SAS_ADDR(parent->port->disc.eeds_a) == 0) { memcpy(parent->port->disc.eeds_a, parent->sas_addr, SAS_ADDR_SIZE); memcpy(parent->port->disc.eeds_b, child->sas_addr, SAS_ADDR_SIZE); } else if (((SAS_ADDR(parent->port->disc.eeds_a) == SAS_ADDR(parent->sas_addr)) || (SAS_ADDR(parent->port->disc.eeds_a) == SAS_ADDR(child->sas_addr))) && ((SAS_ADDR(parent->port->disc.eeds_b) == SAS_ADDR(parent->sas_addr)) || (SAS_ADDR(parent->port->disc.eeds_b) == SAS_ADDR(child->sas_addr)))) ; else { res = -ENODEV; pr_warn("edge ex %016llx phy%02d <--> edge ex %016llx phy%02d link forms a third EEDS!\n", SAS_ADDR(parent->sas_addr), parent_phy->phy_id, SAS_ADDR(child->sas_addr), child_phy->phy_id); } return res; } /* Here we spill over 80 columns. It is intentional. */ static int sas_check_parent_topology(struct domain_device *child) { struct expander_device *child_ex = &child->ex_dev; struct expander_device *parent_ex; int i; int res = 0; if (!child->parent) return 0; if (!dev_is_expander(child->parent->dev_type)) return 0; parent_ex = &child->parent->ex_dev; for (i = 0; i < parent_ex->num_phys; i++) { struct ex_phy *parent_phy = &parent_ex->ex_phy[i]; struct ex_phy *child_phy; if (parent_phy->phy_state == PHY_VACANT || parent_phy->phy_state == PHY_NOT_PRESENT) continue; if (SAS_ADDR(parent_phy->attached_sas_addr) != SAS_ADDR(child->sas_addr)) continue; child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id]; switch (child->parent->dev_type) { case SAS_EDGE_EXPANDER_DEVICE: if (child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) { if (parent_phy->routing_attr != SUBTRACTIVE_ROUTING || child_phy->routing_attr != TABLE_ROUTING) { sas_print_parent_topology_bug(child, parent_phy, child_phy); res = -ENODEV; } } else if (parent_phy->routing_attr == SUBTRACTIVE_ROUTING) { if (child_phy->routing_attr == SUBTRACTIVE_ROUTING) { res = sas_check_eeds(child, parent_phy, child_phy); } else if (child_phy->routing_attr != TABLE_ROUTING) { sas_print_parent_topology_bug(child, parent_phy, child_phy); res = -ENODEV; } } else if (parent_phy->routing_attr == TABLE_ROUTING) { if (child_phy->routing_attr == SUBTRACTIVE_ROUTING || (child_phy->routing_attr == TABLE_ROUTING && child_ex->t2t_supp && parent_ex->t2t_supp)) { /* All good */; } else { sas_print_parent_topology_bug(child, parent_phy, child_phy); res = -ENODEV; } } break; case SAS_FANOUT_EXPANDER_DEVICE: if (parent_phy->routing_attr != TABLE_ROUTING || child_phy->routing_attr != SUBTRACTIVE_ROUTING) { sas_print_parent_topology_bug(child, parent_phy, child_phy); res = -ENODEV; } break; default: break; } } return res; } #define RRI_REQ_SIZE 16 #define RRI_RESP_SIZE 44 static int sas_configure_present(struct domain_device *dev, int phy_id, u8 *sas_addr, int *index, int *present) { int i, res = 0; struct expander_device *ex = &dev->ex_dev; struct ex_phy *phy = &ex->ex_phy[phy_id]; u8 *rri_req; u8 *rri_resp; *present = 0; *index = 0; rri_req = alloc_smp_req(RRI_REQ_SIZE); if (!rri_req) return -ENOMEM; rri_resp = alloc_smp_resp(RRI_RESP_SIZE); if (!rri_resp) { kfree(rri_req); return -ENOMEM; } rri_req[1] = SMP_REPORT_ROUTE_INFO; rri_req[9] = phy_id; for (i = 0; i < ex->max_route_indexes ; i++) { *(__be16 *)(rri_req+6) = cpu_to_be16(i); res = smp_execute_task(dev, rri_req, RRI_REQ_SIZE, rri_resp, RRI_RESP_SIZE); if (res) goto out; res = rri_resp[2]; if (res == SMP_RESP_NO_INDEX) { pr_warn("overflow of indexes: dev %016llx phy%02d index 0x%x\n", SAS_ADDR(dev->sas_addr), phy_id, i); goto out; } else if (res != SMP_RESP_FUNC_ACC) { pr_notice("%s: dev %016llx phy%02d index 0x%x result 0x%x\n", __func__, SAS_ADDR(dev->sas_addr), phy_id, i, res); goto out; } if (SAS_ADDR(sas_addr) != 0) { if (SAS_ADDR(rri_resp+16) == SAS_ADDR(sas_addr)) { *index = i; if ((rri_resp[12] & 0x80) == 0x80) *present = 0; else *present = 1; goto out; } else if (SAS_ADDR(rri_resp+16) == 0) { *index = i; *present = 0; goto out; } } else if (SAS_ADDR(rri_resp+16) == 0 && phy->last_da_index < i) { phy->last_da_index = i; *index = i; *present = 0; goto out; } } res = -1; out: kfree(rri_req); kfree(rri_resp); return res; } #define CRI_REQ_SIZE 44 #define CRI_RESP_SIZE 8 static int sas_configure_set(struct domain_device *dev, int phy_id, u8 *sas_addr, int index, int include) { int res; u8 *cri_req; u8 *cri_resp; cri_req = alloc_smp_req(CRI_REQ_SIZE); if (!cri_req) return -ENOMEM; cri_resp = alloc_smp_resp(CRI_RESP_SIZE); if (!cri_resp) { kfree(cri_req); return -ENOMEM; } cri_req[1] = SMP_CONF_ROUTE_INFO; *(__be16 *)(cri_req+6) = cpu_to_be16(index); cri_req[9] = phy_id; if (SAS_ADDR(sas_addr) == 0 || !include) cri_req[12] |= 0x80; memcpy(cri_req+16, sas_addr, SAS_ADDR_SIZE); res = smp_execute_task(dev, cri_req, CRI_REQ_SIZE, cri_resp, CRI_RESP_SIZE); if (res) goto out; res = cri_resp[2]; if (res == SMP_RESP_NO_INDEX) { pr_warn("overflow of indexes: dev %016llx phy%02d index 0x%x\n", SAS_ADDR(dev->sas_addr), phy_id, index); } out: kfree(cri_req); kfree(cri_resp); return res; } static int sas_configure_phy(struct domain_device *dev, int phy_id, u8 *sas_addr, int include) { int index; int present; int res; res = sas_configure_present(dev, phy_id, sas_addr, &index, &present); if (res) return res; if (include ^ present) return sas_configure_set(dev, phy_id, sas_addr, index, include); return res; } /** * sas_configure_parent - configure routing table of parent * @parent: parent expander * @child: child expander * @sas_addr: SAS port identifier of device directly attached to child * @include: whether or not to include @child in the expander routing table */ static int sas_configure_parent(struct domain_device *parent, struct domain_device *child, u8 *sas_addr, int include) { struct expander_device *ex_parent = &parent->ex_dev; int res = 0; int i; if (parent->parent) { res = sas_configure_parent(parent->parent, parent, sas_addr, include); if (res) return res; } if (ex_parent->conf_route_table == 0) { pr_debug("ex %016llx has self-configuring routing table\n", SAS_ADDR(parent->sas_addr)); return 0; } for (i = 0; i < ex_parent->num_phys; i++) { struct ex_phy *phy = &ex_parent->ex_phy[i]; if ((phy->routing_attr == TABLE_ROUTING) && (SAS_ADDR(phy->attached_sas_addr) == SAS_ADDR(child->sas_addr))) { res = sas_configure_phy(parent, i, sas_addr, include); if (res) return res; } } return res; } /** * sas_configure_routing - configure routing * @dev: expander device * @sas_addr: port identifier of device directly attached to the expander device */ static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr) { if (dev->parent) return sas_configure_parent(dev->parent, dev, sas_addr, 1); return 0; } static int sas_disable_routing(struct domain_device *dev, u8 *sas_addr) { if (dev->parent) return sas_configure_parent(dev->parent, dev, sas_addr, 0); return 0; } /** * sas_discover_expander - expander discovery * @dev: pointer to expander domain device * * See comment in sas_discover_sata(). */ static int sas_discover_expander(struct domain_device *dev) { int res; res = sas_notify_lldd_dev_found(dev); if (res) return res; res = sas_ex_general(dev); if (res) goto out_err; res = sas_ex_manuf_info(dev); if (res) goto out_err; res = sas_expander_discover(dev); if (res) { pr_warn("expander %016llx discovery failed(0x%x)\n", SAS_ADDR(dev->sas_addr), res); goto out_err; } sas_check_ex_subtractive_boundary(dev); res = sas_check_parent_topology(dev); if (res) goto out_err; return 0; out_err: sas_notify_lldd_dev_gone(dev); return res; } static int sas_ex_level_discovery(struct asd_sas_port *port, const int level) { int res = 0; struct domain_device *dev; list_for_each_entry(dev, &port->dev_list, dev_list_node) { if (dev_is_expander(dev->dev_type)) { struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy); if (level == ex->level) res = sas_ex_discover_devices(dev, -1); else if (level > 0) res = sas_ex_discover_devices(port->port_dev, -1); } } return res; } static int sas_ex_bfs_disc(struct asd_sas_port *port) { int res; int level; do { level = port->disc.max_level; res = sas_ex_level_discovery(port, level); mb(); } while (level < port->disc.max_level); return res; } int sas_discover_root_expander(struct domain_device *dev) { int res; struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy); res = sas_rphy_add(dev->rphy); if (res) goto out_err; ex->level = dev->port->disc.max_level; /* 0 */ res = sas_discover_expander(dev); if (res) goto out_err2; sas_ex_bfs_disc(dev->port); return res; out_err2: sas_rphy_remove(dev->rphy); out_err: return res; } /* ---------- Domain revalidation ---------- */ static int sas_get_phy_discover(struct domain_device *dev, int phy_id, struct smp_resp *disc_resp) { int res; u8 *disc_req; disc_req = alloc_smp_req(DISCOVER_REQ_SIZE); if (!disc_req) return -ENOMEM; disc_req[1] = SMP_DISCOVER; disc_req[9] = phy_id; res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE, disc_resp, DISCOVER_RESP_SIZE); if (res) goto out; else if (disc_resp->result != SMP_RESP_FUNC_ACC) { res = disc_resp->result; goto out; } out: kfree(disc_req); return res; } static int sas_get_phy_change_count(struct domain_device *dev, int phy_id, int *pcc) { int res; struct smp_resp *disc_resp; disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE); if (!disc_resp) return -ENOMEM; res = sas_get_phy_discover(dev, phy_id, disc_resp); if (!res) *pcc = disc_resp->disc.change_count; kfree(disc_resp); return res; } static int sas_get_phy_attached_dev(struct domain_device *dev, int phy_id, u8 *sas_addr, enum sas_device_type *type) { int res; struct smp_resp *disc_resp; struct discover_resp *dr; disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE); if (!disc_resp) return -ENOMEM; dr = &disc_resp->disc; res = sas_get_phy_discover(dev, phy_id, disc_resp); if (res == 0) { memcpy(sas_addr, disc_resp->disc.attached_sas_addr, SAS_ADDR_SIZE); *type = to_dev_type(dr); if (*type == 0) memset(sas_addr, 0, SAS_ADDR_SIZE); } kfree(disc_resp); return res; } static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id, int from_phy, bool update) { struct expander_device *ex = &dev->ex_dev; int res = 0; int i; for (i = from_phy; i < ex->num_phys; i++) { int phy_change_count = 0; res = sas_get_phy_change_count(dev, i, &phy_change_count); switch (res) { case SMP_RESP_PHY_VACANT: case SMP_RESP_NO_PHY: continue; case SMP_RESP_FUNC_ACC: break; default: return res; } if (phy_change_count != ex->ex_phy[i].phy_change_count) { if (update) ex->ex_phy[i].phy_change_count = phy_change_count; *phy_id = i; return 0; } } return 0; } static int sas_get_ex_change_count(struct domain_device *dev, int *ecc) { int res; u8 *rg_req; struct smp_resp *rg_resp; rg_req = alloc_smp_req(RG_REQ_SIZE); if (!rg_req) return -ENOMEM; rg_resp = alloc_smp_resp(RG_RESP_SIZE); if (!rg_resp) { kfree(rg_req); return -ENOMEM; } rg_req[1] = SMP_REPORT_GENERAL; res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp, RG_RESP_SIZE); if (res) goto out; if (rg_resp->result != SMP_RESP_FUNC_ACC) { res = rg_resp->result; goto out; } *ecc = be16_to_cpu(rg_resp->rg.change_count); out: kfree(rg_resp); kfree(rg_req); return res; } /** * sas_find_bcast_dev - find the device issue BROADCAST(CHANGE). * @dev:domain device to be detect. * @src_dev: the device which originated BROADCAST(CHANGE). * * Add self-configuration expander support. Suppose two expander cascading, * when the first level expander is self-configuring, hotplug the disks in * second level expander, BROADCAST(CHANGE) will not only be originated * in the second level expander, but also be originated in the first level * expander (see SAS protocol SAS 2r-14, 7.11 for detail), it is to say, * expander changed count in two level expanders will all increment at least * once, but the phy which chang count has changed is the source device which * we concerned. */ static int sas_find_bcast_dev(struct domain_device *dev, struct domain_device **src_dev) { struct expander_device *ex = &dev->ex_dev; int ex_change_count = -1; int phy_id = -1; int res; struct domain_device *ch; res = sas_get_ex_change_count(dev, &ex_change_count); if (res) goto out; if (ex_change_count != -1 && ex_change_count != ex->ex_change_count) { /* Just detect if this expander phys phy change count changed, * in order to determine if this expander originate BROADCAST, * and do not update phy change count field in our structure. */ res = sas_find_bcast_phy(dev, &phy_id, 0, false); if (phy_id != -1) { *src_dev = dev; ex->ex_change_count = ex_change_count; pr_info("ex %016llx phy%02d change count has changed\n", SAS_ADDR(dev->sas_addr), phy_id); return res; } else pr_info("ex %016llx phys DID NOT change\n", SAS_ADDR(dev->sas_addr)); } list_for_each_entry(ch, &ex->children, siblings) { if (dev_is_expander(ch->dev_type)) { res = sas_find_bcast_dev(ch, src_dev); if (*src_dev) return res; } } out: return res; } static void sas_unregister_ex_tree(struct asd_sas_port *port, struct domain_device *dev) { struct expander_device *ex = &dev->ex_dev; struct domain_device *child, *n; list_for_each_entry_safe(child, n, &ex->children, siblings) { set_bit(SAS_DEV_GONE, &child->state); if (dev_is_expander(child->dev_type)) sas_unregister_ex_tree(port, child); else sas_unregister_dev(port, child); } sas_unregister_dev(port, dev); } static void sas_unregister_devs_sas_addr(struct domain_device *parent, int phy_id, bool last) { struct expander_device *ex_dev = &parent->ex_dev; struct ex_phy *phy = &ex_dev->ex_phy[phy_id]; struct domain_device *child, *n, *found = NULL; if (last) { list_for_each_entry_safe(child, n, &ex_dev->children, siblings) { if (SAS_ADDR(child->sas_addr) == SAS_ADDR(phy->attached_sas_addr)) { set_bit(SAS_DEV_GONE, &child->state); if (dev_is_expander(child->dev_type)) sas_unregister_ex_tree(parent->port, child); else sas_unregister_dev(parent->port, child); found = child; break; } } sas_disable_routing(parent, phy->attached_sas_addr); } memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE); if (phy->port) { sas_port_delete_phy(phy->port, phy->phy); sas_device_set_phy(found, phy->port); if (phy->port->num_phys == 0) list_add_tail(&phy->port->del_list, &parent->port->sas_port_del_list); phy->port = NULL; } } static int sas_discover_bfs_by_root_level(struct domain_device *root, const int level) { struct expander_device *ex_root = &root->ex_dev; struct domain_device *child; int res = 0; list_for_each_entry(child, &ex_root->children, siblings) { if (dev_is_expander(child->dev_type)) { struct sas_expander_device *ex = rphy_to_expander_device(child->rphy); if (level > ex->level) res = sas_discover_bfs_by_root_level(child, level); else if (level == ex->level) res = sas_ex_discover_devices(child, -1); } } return res; } static int sas_discover_bfs_by_root(struct domain_device *dev) { int res; struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy); int level = ex->level+1; res = sas_ex_discover_devices(dev, -1); if (res) goto out; do { res = sas_discover_bfs_by_root_level(dev, level); mb(); level += 1; } while (level <= dev->port->disc.max_level); out: return res; } static int sas_discover_new(struct domain_device *dev, int phy_id) { struct ex_phy *ex_phy = &dev->ex_dev.ex_phy[phy_id]; struct domain_device *child; int res; pr_debug("ex %016llx phy%02d new device attached\n", SAS_ADDR(dev->sas_addr), phy_id); res = sas_ex_phy_discover(dev, phy_id); if (res) return res; if (sas_ex_join_wide_port(dev, phy_id)) return 0; res = sas_ex_discover_devices(dev, phy_id); if (res) return res; list_for_each_entry(child, &dev->ex_dev.children, siblings) { if (SAS_ADDR(child->sas_addr) == SAS_ADDR(ex_phy->attached_sas_addr)) { if (dev_is_expander(child->dev_type)) res = sas_discover_bfs_by_root(child); break; } } return res; } static bool dev_type_flutter(enum sas_device_type new, enum sas_device_type old) { if (old == new) return true; /* treat device directed resets as flutter, if we went * SAS_END_DEVICE to SAS_SATA_PENDING the link needs recovery */ if ((old == SAS_SATA_PENDING && new == SAS_END_DEVICE) || (old == SAS_END_DEVICE && new == SAS_SATA_PENDING)) return true; return false; } static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last, int sibling) { struct expander_device *ex = &dev->ex_dev; struct ex_phy *phy = &ex->ex_phy[phy_id]; enum sas_device_type type = SAS_PHY_UNUSED; u8 sas_addr[SAS_ADDR_SIZE]; char msg[80] = ""; int res; if (!last) sprintf(msg, ", part of a wide port with phy%02d", sibling); pr_debug("ex %016llx rediscovering phy%02d%s\n", SAS_ADDR(dev->sas_addr), phy_id, msg); memset(sas_addr, 0, SAS_ADDR_SIZE); res = sas_get_phy_attached_dev(dev, phy_id, sas_addr, &type); switch (res) { case SMP_RESP_NO_PHY: phy->phy_state = PHY_NOT_PRESENT; sas_unregister_devs_sas_addr(dev, phy_id, last); return res; case SMP_RESP_PHY_VACANT: phy->phy_state = PHY_VACANT; sas_unregister_devs_sas_addr(dev, phy_id, last); return res; case SMP_RESP_FUNC_ACC: break; case -ECOMM: break; default: return res; } if ((SAS_ADDR(sas_addr) == 0) || (res == -ECOMM)) { phy->phy_state = PHY_EMPTY; sas_unregister_devs_sas_addr(dev, phy_id, last); /* * Even though the PHY is empty, for convenience we discover * the PHY to update the PHY info, like negotiated linkrate. */ sas_ex_phy_discover(dev, phy_id); return res; } else if (SAS_ADDR(sas_addr) == SAS_ADDR(phy->attached_sas_addr) && dev_type_flutter(type, phy->attached_dev_type)) { struct domain_device *ata_dev = sas_ex_to_ata(dev, phy_id); char *action = ""; sas_ex_phy_discover(dev, phy_id); if (ata_dev && phy->attached_dev_type == SAS_SATA_PENDING) action = ", needs recovery"; pr_debug("ex %016llx phy%02d broadcast flutter%s\n", SAS_ADDR(dev->sas_addr), phy_id, action); return res; } /* we always have to delete the old device when we went here */ pr_info("ex %016llx phy%02d replace %016llx\n", SAS_ADDR(dev->sas_addr), phy_id, SAS_ADDR(phy->attached_sas_addr)); sas_unregister_devs_sas_addr(dev, phy_id, last); return sas_discover_new(dev, phy_id); } /** * sas_rediscover - revalidate the domain. * @dev:domain device to be detect. * @phy_id: the phy id will be detected. * * NOTE: this process _must_ quit (return) as soon as any connection * errors are encountered. Connection recovery is done elsewhere. * Discover process only interrogates devices in order to discover the * domain.For plugging out, we un-register the device only when it is * the last phy in the port, for other phys in this port, we just delete it * from the port.For inserting, we do discovery when it is the * first phy,for other phys in this port, we add it to the port to * forming the wide-port. */ static int sas_rediscover(struct domain_device *dev, const int phy_id) { struct expander_device *ex = &dev->ex_dev; struct ex_phy *changed_phy = &ex->ex_phy[phy_id]; int res = 0; int i; bool last = true; /* is this the last phy of the port */ pr_debug("ex %016llx phy%02d originated BROADCAST(CHANGE)\n", SAS_ADDR(dev->sas_addr), phy_id); if (SAS_ADDR(changed_phy->attached_sas_addr) != 0) { for (i = 0; i < ex->num_phys; i++) { struct ex_phy *phy = &ex->ex_phy[i]; if (i == phy_id) continue; if (SAS_ADDR(phy->attached_sas_addr) == SAS_ADDR(changed_phy->attached_sas_addr)) { last = false; break; } } res = sas_rediscover_dev(dev, phy_id, last, i); } else res = sas_discover_new(dev, phy_id); return res; } /** * sas_ex_revalidate_domain - revalidate the domain * @port_dev: port domain device. * * NOTE: this process _must_ quit (return) as soon as any connection * errors are encountered. Connection recovery is done elsewhere. * Discover process only interrogates devices in order to discover the * domain. */ int sas_ex_revalidate_domain(struct domain_device *port_dev) { int res; struct domain_device *dev = NULL; res = sas_find_bcast_dev(port_dev, &dev); if (res == 0 && dev) { struct expander_device *ex = &dev->ex_dev; int i = 0, phy_id; do { phy_id = -1; res = sas_find_bcast_phy(dev, &phy_id, i, true); if (phy_id == -1) break; res = sas_rediscover(dev, phy_id); i = phy_id + 1; } while (i < ex->num_phys); } return res; } void sas_smp_handler(struct bsg_job *job, struct Scsi_Host *shost, struct sas_rphy *rphy) { struct domain_device *dev; unsigned int rcvlen = 0; int ret = -EINVAL; /* no rphy means no smp target support (ie aic94xx host) */ if (!rphy) return sas_smp_host_handler(job, shost); switch (rphy->identify.device_type) { case SAS_EDGE_EXPANDER_DEVICE: case SAS_FANOUT_EXPANDER_DEVICE: break; default: pr_err("%s: can we send a smp request to a device?\n", __func__); goto out; } dev = sas_find_dev_by_rphy(rphy); if (!dev) { pr_err("%s: fail to find a domain_device?\n", __func__); goto out; } /* do we need to support multiple segments? */ if (job->request_payload.sg_cnt > 1 || job->reply_payload.sg_cnt > 1) { pr_info("%s: multiple segments req %u, rsp %u\n", __func__, job->request_payload.payload_len, job->reply_payload.payload_len); goto out; } ret = smp_execute_task_sg(dev, job->request_payload.sg_list, job->reply_payload.sg_list); if (ret >= 0) { /* bsg_job_done() requires the length received */ rcvlen = job->reply_payload.payload_len - ret; ret = 0; } out: bsg_job_done(job, ret, rcvlen); }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1