Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Alan Stern | 1698 | 67.35% | 19 | 27.54% |
Greg Kroah-Hartman | 316 | 12.53% | 6 | 8.70% |
David Brownell | 154 | 6.11% | 12 | 17.39% |
Andy Shevchenko | 74 | 2.94% | 2 | 2.90% |
Sage Sharp | 73 | 2.90% | 3 | 4.35% |
Huang Rui | 25 | 0.99% | 1 | 1.45% |
Jiang Liu | 22 | 0.87% | 1 | 1.45% |
Robert Dobrowolski | 22 | 0.87% | 1 | 1.45% |
Carsten Schmid | 19 | 0.75% | 1 | 1.45% |
Rafael J. Wysocki | 18 | 0.71% | 3 | 4.35% |
Hannes Reinecke | 17 | 0.67% | 1 | 1.45% |
Andrew Morton | 15 | 0.60% | 2 | 2.90% |
Aleksey Gorelov | 13 | 0.52% | 1 | 1.45% |
Peter Chen | 9 | 0.36% | 1 | 1.45% |
Randy Dunlap | 9 | 0.36% | 1 | 1.45% |
Andiry Brienza | 8 | 0.32% | 1 | 1.45% |
David S. Miller | 6 | 0.24% | 2 | 2.90% |
Vinod Koul | 4 | 0.16% | 1 | 1.45% |
Benjamin Herrenschmidt | 4 | 0.16% | 1 | 1.45% |
Vasiliy Kulikov | 3 | 0.12% | 1 | 1.45% |
Eric Lescouet | 3 | 0.12% | 1 | 1.45% |
Ahmed S. Darwish | 2 | 0.08% | 1 | 1.45% |
Chuhong Yuan | 2 | 0.08% | 1 | 1.45% |
Mathias Nyman | 1 | 0.04% | 1 | 1.45% |
Denis Efremov | 1 | 0.04% | 1 | 1.45% |
Christoph Hellwig | 1 | 0.04% | 1 | 1.45% |
Alexey Dobriyan | 1 | 0.04% | 1 | 1.45% |
Thomas Gleixner | 1 | 0.04% | 1 | 1.45% |
Total | 2521 | 69 |
// SPDX-License-Identifier: GPL-2.0+ /* * (C) Copyright David Brownell 2000-2002 */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/usb.h> #include <linux/usb/hcd.h> #include <asm/io.h> #include <asm/irq.h> #ifdef CONFIG_PPC_PMAC #include <asm/machdep.h> #include <asm/pmac_feature.h> #include <asm/prom.h> #endif #include "usb.h" /* PCI-based HCs are common, but plenty of non-PCI HCs are used too */ /* * Coordinate handoffs between EHCI and companion controllers * during EHCI probing and system resume. */ static DECLARE_RWSEM(companions_rwsem); #define CL_UHCI PCI_CLASS_SERIAL_USB_UHCI #define CL_OHCI PCI_CLASS_SERIAL_USB_OHCI #define CL_EHCI PCI_CLASS_SERIAL_USB_EHCI static inline int is_ohci_or_uhci(struct pci_dev *pdev) { return pdev->class == CL_OHCI || pdev->class == CL_UHCI; } typedef void (*companion_fn)(struct pci_dev *pdev, struct usb_hcd *hcd, struct pci_dev *companion, struct usb_hcd *companion_hcd); /* Iterate over PCI devices in the same slot as pdev and call fn for each */ static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd, companion_fn fn) { struct pci_dev *companion; struct usb_hcd *companion_hcd; unsigned int slot = PCI_SLOT(pdev->devfn); /* * Iterate through other PCI functions in the same slot. * If the function's drvdata isn't set then it isn't bound to * a USB host controller driver, so skip it. */ companion = NULL; for_each_pci_dev(companion) { if (companion->bus != pdev->bus || PCI_SLOT(companion->devfn) != slot) continue; /* * Companion device should be either UHCI,OHCI or EHCI host * controller, otherwise skip. */ if (companion->class != CL_UHCI && companion->class != CL_OHCI && companion->class != CL_EHCI) continue; companion_hcd = pci_get_drvdata(companion); if (!companion_hcd || !companion_hcd->self.root_hub) continue; fn(pdev, hcd, companion, companion_hcd); } } /* * We're about to add an EHCI controller, which will unceremoniously grab * all the port connections away from its companions. To prevent annoying * error messages, lock the companion's root hub and gracefully unconfigure * it beforehand. Leave it locked until the EHCI controller is all set. */ static void ehci_pre_add(struct pci_dev *pdev, struct usb_hcd *hcd, struct pci_dev *companion, struct usb_hcd *companion_hcd) { struct usb_device *udev; if (is_ohci_or_uhci(companion)) { udev = companion_hcd->self.root_hub; usb_lock_device(udev); usb_set_configuration(udev, 0); } } /* * Adding the EHCI controller has either succeeded or failed. Set the * companion pointer accordingly, and in either case, reconfigure and * unlock the root hub. */ static void ehci_post_add(struct pci_dev *pdev, struct usb_hcd *hcd, struct pci_dev *companion, struct usb_hcd *companion_hcd) { struct usb_device *udev; if (is_ohci_or_uhci(companion)) { if (dev_get_drvdata(&pdev->dev)) { /* Succeeded */ dev_dbg(&pdev->dev, "HS companion for %s\n", dev_name(&companion->dev)); companion_hcd->self.hs_companion = &hcd->self; } udev = companion_hcd->self.root_hub; usb_set_configuration(udev, 1); usb_unlock_device(udev); } } /* * We just added a non-EHCI controller. Find the EHCI controller to * which it is a companion, and store a pointer to the bus structure. */ static void non_ehci_add(struct pci_dev *pdev, struct usb_hcd *hcd, struct pci_dev *companion, struct usb_hcd *companion_hcd) { if (is_ohci_or_uhci(pdev) && companion->class == CL_EHCI) { dev_dbg(&pdev->dev, "FS/LS companion for %s\n", dev_name(&companion->dev)); hcd->self.hs_companion = &companion_hcd->self; } } /* We are removing an EHCI controller. Clear the companions' pointers. */ static void ehci_remove(struct pci_dev *pdev, struct usb_hcd *hcd, struct pci_dev *companion, struct usb_hcd *companion_hcd) { if (is_ohci_or_uhci(companion)) companion_hcd->self.hs_companion = NULL; } #ifdef CONFIG_PM /* An EHCI controller must wait for its companions before resuming. */ static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd, struct pci_dev *companion, struct usb_hcd *companion_hcd) { if (is_ohci_or_uhci(companion)) device_pm_wait_for_dev(&pdev->dev, &companion->dev); } #endif /* CONFIG_PM */ /*-------------------------------------------------------------------------*/ /* configure so an HC device and id are always provided */ /* always called with process context; sleeping is OK */ /** * usb_hcd_pci_probe - initialize PCI-based HCDs * @dev: USB Host Controller being probed * @id: pci hotplug id connecting controller to HCD framework * @driver: USB HC driver handle * * Context: task context, might sleep * * Allocates basic PCI resources for this USB host controller, and * then invokes the start() method for the HCD associated with it * through the hotplug entry's driver_data. * * Store this function in the HCD's struct pci_driver as probe(). * * Return: 0 if successful. */ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id, const struct hc_driver *driver) { struct usb_hcd *hcd; int retval; int hcd_irq = 0; if (usb_disabled()) return -ENODEV; if (!id) return -EINVAL; if (!driver) return -EINVAL; if (pci_enable_device(dev) < 0) return -ENODEV; /* * The xHCI driver has its own irq management * make sure irq setup is not touched for xhci in generic hcd code */ if ((driver->flags & HCD_MASK) < HCD_USB3) { retval = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY | PCI_IRQ_MSI); if (retval < 0) { dev_err(&dev->dev, "Found HC with no IRQ. Check BIOS/PCI %s setup!\n", pci_name(dev)); retval = -ENODEV; goto disable_pci; } hcd_irq = pci_irq_vector(dev, 0); } hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev)); if (!hcd) { retval = -ENOMEM; goto free_irq_vectors; } hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) && driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0; if (driver->flags & HCD_MEMORY) { /* EHCI, OHCI */ hcd->rsrc_start = pci_resource_start(dev, 0); hcd->rsrc_len = pci_resource_len(dev, 0); if (!devm_request_mem_region(&dev->dev, hcd->rsrc_start, hcd->rsrc_len, driver->description)) { dev_dbg(&dev->dev, "controller already in use\n"); retval = -EBUSY; goto put_hcd; } hcd->regs = devm_ioremap(&dev->dev, hcd->rsrc_start, hcd->rsrc_len); if (hcd->regs == NULL) { dev_dbg(&dev->dev, "error mapping memory\n"); retval = -EFAULT; goto put_hcd; } } else { /* UHCI */ int region; for (region = 0; region < PCI_STD_NUM_BARS; region++) { if (!(pci_resource_flags(dev, region) & IORESOURCE_IO)) continue; hcd->rsrc_start = pci_resource_start(dev, region); hcd->rsrc_len = pci_resource_len(dev, region); if (devm_request_region(&dev->dev, hcd->rsrc_start, hcd->rsrc_len, driver->description)) break; } if (region == PCI_ROM_RESOURCE) { dev_dbg(&dev->dev, "no i/o regions available\n"); retval = -EBUSY; goto put_hcd; } } pci_set_master(dev); /* Note: dev_set_drvdata must be called while holding the rwsem */ if (dev->class == CL_EHCI) { down_write(&companions_rwsem); dev_set_drvdata(&dev->dev, hcd); for_each_companion(dev, hcd, ehci_pre_add); retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED); if (retval != 0) dev_set_drvdata(&dev->dev, NULL); for_each_companion(dev, hcd, ehci_post_add); up_write(&companions_rwsem); } else { down_read(&companions_rwsem); dev_set_drvdata(&dev->dev, hcd); retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED); if (retval != 0) dev_set_drvdata(&dev->dev, NULL); else for_each_companion(dev, hcd, non_ehci_add); up_read(&companions_rwsem); } if (retval != 0) goto put_hcd; device_wakeup_enable(hcd->self.controller); if (pci_dev_run_wake(dev)) pm_runtime_put_noidle(&dev->dev); return retval; put_hcd: usb_put_hcd(hcd); free_irq_vectors: if ((driver->flags & HCD_MASK) < HCD_USB3) pci_free_irq_vectors(dev); disable_pci: pci_disable_device(dev); dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval); return retval; } EXPORT_SYMBOL_GPL(usb_hcd_pci_probe); /* may be called without controller electrically present */ /* may be called with controller, bus, and devices active */ /** * usb_hcd_pci_remove - shutdown processing for PCI-based HCDs * @dev: USB Host Controller being removed * * Context: task context, might sleep * * Reverses the effect of usb_hcd_pci_probe(), first invoking * the HCD's stop() method. It is always called from a thread * context, normally "rmmod", "apmd", or something similar. * * Store this function in the HCD's struct pci_driver as remove(). */ void usb_hcd_pci_remove(struct pci_dev *dev) { struct usb_hcd *hcd; int hcd_driver_flags; hcd = pci_get_drvdata(dev); if (!hcd) return; hcd_driver_flags = hcd->driver->flags; if (pci_dev_run_wake(dev)) pm_runtime_get_noresume(&dev->dev); /* Fake an interrupt request in order to give the driver a chance * to test whether the controller hardware has been removed (e.g., * cardbus physical eject). */ local_irq_disable(); usb_hcd_irq(0, hcd); local_irq_enable(); /* Note: dev_set_drvdata must be called while holding the rwsem */ if (dev->class == CL_EHCI) { down_write(&companions_rwsem); for_each_companion(dev, hcd, ehci_remove); usb_remove_hcd(hcd); dev_set_drvdata(&dev->dev, NULL); up_write(&companions_rwsem); } else { /* Not EHCI; just clear the companion pointer */ down_read(&companions_rwsem); hcd->self.hs_companion = NULL; usb_remove_hcd(hcd); dev_set_drvdata(&dev->dev, NULL); up_read(&companions_rwsem); } usb_put_hcd(hcd); if ((hcd_driver_flags & HCD_MASK) < HCD_USB3) pci_free_irq_vectors(dev); pci_disable_device(dev); } EXPORT_SYMBOL_GPL(usb_hcd_pci_remove); /** * usb_hcd_pci_shutdown - shutdown host controller * @dev: USB Host Controller being shutdown */ void usb_hcd_pci_shutdown(struct pci_dev *dev) { struct usb_hcd *hcd; hcd = pci_get_drvdata(dev); if (!hcd) return; if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) && hcd->driver->shutdown) { hcd->driver->shutdown(hcd); if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0) free_irq(hcd->irq, hcd); pci_disable_device(dev); } } EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown); #ifdef CONFIG_PM #ifdef CONFIG_PPC_PMAC static void powermac_set_asic(struct pci_dev *pci_dev, int enable) { /* Enanble or disable ASIC clocks for USB */ if (machine_is(powermac)) { struct device_node *of_node; of_node = pci_device_to_OF_node(pci_dev); if (of_node) pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, enable); } } #else static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable) {} #endif /* CONFIG_PPC_PMAC */ static int check_root_hub_suspended(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); if (HCD_RH_RUNNING(hcd)) { dev_warn(dev, "Root hub is not suspended\n"); return -EBUSY; } if (hcd->shared_hcd) { hcd = hcd->shared_hcd; if (HCD_RH_RUNNING(hcd)) { dev_warn(dev, "Secondary root hub is not suspended\n"); return -EBUSY; } } return 0; } static int suspend_common(struct device *dev, bool do_wakeup) { struct pci_dev *pci_dev = to_pci_dev(dev); struct usb_hcd *hcd = pci_get_drvdata(pci_dev); int retval; /* Root hub suspend should have stopped all downstream traffic, * and all bus master traffic. And done so for both the interface * and the stub usb_device (which we check here). But maybe it * didn't; writing sysfs power/state files ignores such rules... */ retval = check_root_hub_suspended(dev); if (retval) return retval; if (hcd->driver->pci_suspend && !HCD_DEAD(hcd)) { /* Optimization: Don't suspend if a root-hub wakeup is * pending and it would cause the HCD to wake up anyway. */ if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) return -EBUSY; if (do_wakeup && hcd->shared_hcd && HCD_WAKEUP_PENDING(hcd->shared_hcd)) return -EBUSY; retval = hcd->driver->pci_suspend(hcd, do_wakeup); suspend_report_result(hcd->driver->pci_suspend, retval); /* Check again in case wakeup raced with pci_suspend */ if ((retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) || (retval == 0 && do_wakeup && hcd->shared_hcd && HCD_WAKEUP_PENDING(hcd->shared_hcd))) { if (hcd->driver->pci_resume) hcd->driver->pci_resume(hcd, false); retval = -EBUSY; } if (retval) return retval; } /* If MSI-X is enabled, the driver will have synchronized all vectors * in pci_suspend(). If MSI or legacy PCI is enabled, that will be * synchronized here. */ if (!hcd->msix_enabled) synchronize_irq(pci_irq_vector(pci_dev, 0)); /* Downstream ports from this root hub should already be quiesced, so * there will be no DMA activity. Now we can shut down the upstream * link (except maybe for PME# resume signaling). We'll enter a * low power state during suspend_noirq, if the hardware allows. */ pci_disable_device(pci_dev); return retval; } static int resume_common(struct device *dev, int event) { struct pci_dev *pci_dev = to_pci_dev(dev); struct usb_hcd *hcd = pci_get_drvdata(pci_dev); int retval; if (HCD_RH_RUNNING(hcd) || (hcd->shared_hcd && HCD_RH_RUNNING(hcd->shared_hcd))) { dev_dbg(dev, "can't resume, not suspended!\n"); return 0; } retval = pci_enable_device(pci_dev); if (retval < 0) { dev_err(dev, "can't re-enable after resume, %d!\n", retval); return retval; } pci_set_master(pci_dev); if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) { /* * Only EHCI controllers have to wait for their companions. * No locking is needed because PCI controller drivers do not * get unbound during system resume. */ if (pci_dev->class == CL_EHCI && event != PM_EVENT_AUTO_RESUME) for_each_companion(pci_dev, hcd, ehci_wait_for_companions); retval = hcd->driver->pci_resume(hcd, event == PM_EVENT_RESTORE); if (retval) { dev_err(dev, "PCI post-resume error %d!\n", retval); usb_hc_died(hcd); } } return retval; } #ifdef CONFIG_PM_SLEEP static int hcd_pci_suspend(struct device *dev) { return suspend_common(dev, device_may_wakeup(dev)); } static int hcd_pci_suspend_noirq(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); struct usb_hcd *hcd = pci_get_drvdata(pci_dev); int retval; retval = check_root_hub_suspended(dev); if (retval) return retval; pci_save_state(pci_dev); /* If the root hub is dead rather than suspended, disallow remote * wakeup. usb_hc_died() should ensure that both hosts are marked as * dying, so we only need to check the primary roothub. */ if (HCD_DEAD(hcd)) device_set_wakeup_enable(dev, 0); dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev)); /* Possibly enable remote wakeup, * choose the appropriate low-power state, and go to that state. */ retval = pci_prepare_to_sleep(pci_dev); if (retval == -EIO) { /* Low-power not supported */ dev_dbg(dev, "--> PCI D0 legacy\n"); retval = 0; } else if (retval == 0) { dev_dbg(dev, "--> PCI %s\n", pci_power_name(pci_dev->current_state)); } else { suspend_report_result(pci_prepare_to_sleep, retval); return retval; } powermac_set_asic(pci_dev, 0); return retval; } static int hcd_pci_resume_noirq(struct device *dev) { powermac_set_asic(to_pci_dev(dev), 1); return 0; } static int hcd_pci_resume(struct device *dev) { return resume_common(dev, PM_EVENT_RESUME); } static int hcd_pci_restore(struct device *dev) { return resume_common(dev, PM_EVENT_RESTORE); } #else #define hcd_pci_suspend NULL #define hcd_pci_suspend_noirq NULL #define hcd_pci_resume_noirq NULL #define hcd_pci_resume NULL #define hcd_pci_restore NULL #endif /* CONFIG_PM_SLEEP */ static int hcd_pci_runtime_suspend(struct device *dev) { int retval; retval = suspend_common(dev, true); if (retval == 0) powermac_set_asic(to_pci_dev(dev), 0); dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval); return retval; } static int hcd_pci_runtime_resume(struct device *dev) { int retval; powermac_set_asic(to_pci_dev(dev), 1); retval = resume_common(dev, PM_EVENT_AUTO_RESUME); dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval); return retval; } const struct dev_pm_ops usb_hcd_pci_pm_ops = { .suspend = hcd_pci_suspend, .suspend_noirq = hcd_pci_suspend_noirq, .resume_noirq = hcd_pci_resume_noirq, .resume = hcd_pci_resume, .freeze = check_root_hub_suspended, .freeze_noirq = check_root_hub_suspended, .thaw_noirq = NULL, .thaw = NULL, .poweroff = hcd_pci_suspend, .poweroff_noirq = hcd_pci_suspend_noirq, .restore_noirq = hcd_pci_resume_noirq, .restore = hcd_pci_restore, .runtime_suspend = hcd_pci_runtime_suspend, .runtime_resume = hcd_pci_runtime_resume, }; EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops); #endif /* CONFIG_PM */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1