Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Ondrej Zary | 6993 | 98.85% | 1 | 9.09% |
Vaibhav Gupta | 51 | 0.72% | 1 | 9.09% |
Joe Perches | 9 | 0.13% | 1 | 9.09% |
Luis R. Rodriguez | 6 | 0.08% | 1 | 9.09% |
Benoit Taine | 6 | 0.08% | 1 | 9.09% |
Masanari Iida | 3 | 0.04% | 1 | 9.09% |
Gustavo A. R. Silva | 2 | 0.03% | 1 | 9.09% |
Sachin Kamat | 1 | 0.01% | 1 | 9.09% |
Thomas Gleixner | 1 | 0.01% | 1 | 9.09% |
Julia Lawall | 1 | 0.01% | 1 | 9.09% |
Jani Nikula | 1 | 0.01% | 1 | 9.09% |
Total | 7074 | 11 |
// SPDX-License-Identifier: GPL-2.0-only /* * i740fb - framebuffer driver for Intel740 * Copyright (c) 2011 Ondrej Zary * * Based on old i740fb driver (c) 2001-2002 Andrey Ulanov <drey@rt.mipt.ru> * which was partially based on: * VGA 16-color framebuffer driver (c) 1999 Ben Pfaff <pfaffben@debian.org> * and Petr Vandrovec <VANDROVE@vc.cvut.cz> * i740 driver from XFree86 (c) 1998-1999 Precision Insight, Inc., Cedar Park, * Texas. * i740fb by Patrick LERDA, v0.9 */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/errno.h> #include <linux/string.h> #include <linux/mm.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/fb.h> #include <linux/init.h> #include <linux/pci.h> #include <linux/pci_ids.h> #include <linux/i2c.h> #include <linux/i2c-algo-bit.h> #include <linux/console.h> #include <video/vga.h> #include "i740_reg.h" static char *mode_option; static int mtrr = 1; struct i740fb_par { unsigned char __iomem *regs; bool has_sgram; int wc_cookie; bool ddc_registered; struct i2c_adapter ddc_adapter; struct i2c_algo_bit_data ddc_algo; u32 pseudo_palette[16]; struct mutex open_lock; unsigned int ref_count; u8 crtc[VGA_CRT_C]; u8 atc[VGA_ATT_C]; u8 gdc[VGA_GFX_C]; u8 seq[VGA_SEQ_C]; u8 misc; u8 vss; /* i740 specific registers */ u8 display_cntl; u8 pixelpipe_cfg0; u8 pixelpipe_cfg1; u8 pixelpipe_cfg2; u8 video_clk2_m; u8 video_clk2_n; u8 video_clk2_mn_msbs; u8 video_clk2_div_sel; u8 pll_cntl; u8 address_mapping; u8 io_cntl; u8 bitblt_cntl; u8 ext_vert_total; u8 ext_vert_disp_end; u8 ext_vert_sync_start; u8 ext_vert_blank_start; u8 ext_horiz_total; u8 ext_horiz_blank; u8 ext_offset; u8 interlace_cntl; u32 lmi_fifo_watermark; u8 ext_start_addr; u8 ext_start_addr_hi; }; #define DACSPEED8 203 #define DACSPEED16 163 #define DACSPEED24_SG 136 #define DACSPEED24_SD 128 #define DACSPEED32 86 static const struct fb_fix_screeninfo i740fb_fix = { .id = "i740fb", .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_TRUECOLOR, .xpanstep = 8, .ypanstep = 1, .accel = FB_ACCEL_NONE, }; static inline void i740outb(struct i740fb_par *par, u16 port, u8 val) { vga_mm_w(par->regs, port, val); } static inline u8 i740inb(struct i740fb_par *par, u16 port) { return vga_mm_r(par->regs, port); } static inline void i740outreg(struct i740fb_par *par, u16 port, u8 reg, u8 val) { vga_mm_w_fast(par->regs, port, reg, val); } static inline u8 i740inreg(struct i740fb_par *par, u16 port, u8 reg) { vga_mm_w(par->regs, port, reg); return vga_mm_r(par->regs, port+1); } static inline void i740outreg_mask(struct i740fb_par *par, u16 port, u8 reg, u8 val, u8 mask) { vga_mm_w_fast(par->regs, port, reg, (val & mask) | (i740inreg(par, port, reg) & ~mask)); } #define REG_DDC_DRIVE 0x62 #define REG_DDC_STATE 0x63 #define DDC_SCL (1 << 3) #define DDC_SDA (1 << 2) static void i740fb_ddc_setscl(void *data, int val) { struct i740fb_par *par = data; i740outreg_mask(par, XRX, REG_DDC_DRIVE, DDC_SCL, DDC_SCL); i740outreg_mask(par, XRX, REG_DDC_STATE, val ? DDC_SCL : 0, DDC_SCL); } static void i740fb_ddc_setsda(void *data, int val) { struct i740fb_par *par = data; i740outreg_mask(par, XRX, REG_DDC_DRIVE, DDC_SDA, DDC_SDA); i740outreg_mask(par, XRX, REG_DDC_STATE, val ? DDC_SDA : 0, DDC_SDA); } static int i740fb_ddc_getscl(void *data) { struct i740fb_par *par = data; i740outreg_mask(par, XRX, REG_DDC_DRIVE, 0, DDC_SCL); return !!(i740inreg(par, XRX, REG_DDC_STATE) & DDC_SCL); } static int i740fb_ddc_getsda(void *data) { struct i740fb_par *par = data; i740outreg_mask(par, XRX, REG_DDC_DRIVE, 0, DDC_SDA); return !!(i740inreg(par, XRX, REG_DDC_STATE) & DDC_SDA); } static int i740fb_setup_ddc_bus(struct fb_info *info) { struct i740fb_par *par = info->par; strlcpy(par->ddc_adapter.name, info->fix.id, sizeof(par->ddc_adapter.name)); par->ddc_adapter.owner = THIS_MODULE; par->ddc_adapter.class = I2C_CLASS_DDC; par->ddc_adapter.algo_data = &par->ddc_algo; par->ddc_adapter.dev.parent = info->device; par->ddc_algo.setsda = i740fb_ddc_setsda; par->ddc_algo.setscl = i740fb_ddc_setscl; par->ddc_algo.getsda = i740fb_ddc_getsda; par->ddc_algo.getscl = i740fb_ddc_getscl; par->ddc_algo.udelay = 10; par->ddc_algo.timeout = 20; par->ddc_algo.data = par; i2c_set_adapdata(&par->ddc_adapter, par); return i2c_bit_add_bus(&par->ddc_adapter); } static int i740fb_open(struct fb_info *info, int user) { struct i740fb_par *par = info->par; mutex_lock(&(par->open_lock)); par->ref_count++; mutex_unlock(&(par->open_lock)); return 0; } static int i740fb_release(struct fb_info *info, int user) { struct i740fb_par *par = info->par; mutex_lock(&(par->open_lock)); if (par->ref_count == 0) { fb_err(info, "release called with zero refcount\n"); mutex_unlock(&(par->open_lock)); return -EINVAL; } par->ref_count--; mutex_unlock(&(par->open_lock)); return 0; } static u32 i740_calc_fifo(struct i740fb_par *par, u32 freq, int bpp) { /* * Would like to calculate these values automatically, but a generic * algorithm does not seem possible. Note: These FIFO water mark * values were tested on several cards and seem to eliminate the * all of the snow and vertical banding, but fine adjustments will * probably be required for other cards. */ u32 wm; switch (bpp) { case 8: if (freq > 200) wm = 0x18120000; else if (freq > 175) wm = 0x16110000; else if (freq > 135) wm = 0x120E0000; else wm = 0x100D0000; break; case 15: case 16: if (par->has_sgram) { if (freq > 140) wm = 0x2C1D0000; else if (freq > 120) wm = 0x2C180000; else if (freq > 100) wm = 0x24160000; else if (freq > 90) wm = 0x18120000; else if (freq > 50) wm = 0x16110000; else if (freq > 32) wm = 0x13100000; else wm = 0x120E0000; } else { if (freq > 160) wm = 0x28200000; else if (freq > 140) wm = 0x2A1E0000; else if (freq > 130) wm = 0x2B1A0000; else if (freq > 120) wm = 0x2C180000; else if (freq > 100) wm = 0x24180000; else if (freq > 90) wm = 0x18120000; else if (freq > 50) wm = 0x16110000; else if (freq > 32) wm = 0x13100000; else wm = 0x120E0000; } break; case 24: if (par->has_sgram) { if (freq > 130) wm = 0x31200000; else if (freq > 120) wm = 0x2E200000; else if (freq > 100) wm = 0x2C1D0000; else if (freq > 80) wm = 0x25180000; else if (freq > 64) wm = 0x24160000; else if (freq > 49) wm = 0x18120000; else if (freq > 32) wm = 0x16110000; else wm = 0x13100000; } else { if (freq > 120) wm = 0x311F0000; else if (freq > 100) wm = 0x2C1D0000; else if (freq > 80) wm = 0x25180000; else if (freq > 64) wm = 0x24160000; else if (freq > 49) wm = 0x18120000; else if (freq > 32) wm = 0x16110000; else wm = 0x13100000; } break; case 32: if (par->has_sgram) { if (freq > 80) wm = 0x2A200000; else if (freq > 60) wm = 0x281A0000; else if (freq > 49) wm = 0x25180000; else if (freq > 32) wm = 0x18120000; else wm = 0x16110000; } else { if (freq > 80) wm = 0x29200000; else if (freq > 60) wm = 0x281A0000; else if (freq > 49) wm = 0x25180000; else if (freq > 32) wm = 0x18120000; else wm = 0x16110000; } break; } return wm; } /* clock calculation from i740fb by Patrick LERDA */ #define I740_RFREQ 1000000 #define TARGET_MAX_N 30 #define I740_FFIX (1 << 8) #define I740_RFREQ_FIX (I740_RFREQ / I740_FFIX) #define I740_REF_FREQ (6667 * I740_FFIX / 100) /* 66.67 MHz */ #define I740_MAX_VCO_FREQ (450 * I740_FFIX) /* 450 MHz */ static void i740_calc_vclk(u32 freq, struct i740fb_par *par) { const u32 err_max = freq / (200 * I740_RFREQ / I740_FFIX); const u32 err_target = freq / (1000 * I740_RFREQ / I740_FFIX); u32 err_best = 512 * I740_FFIX; u32 f_err, f_vco; int m_best = 0, n_best = 0, p_best = 0; int m, n; p_best = min(15, ilog2(I740_MAX_VCO_FREQ / (freq / I740_RFREQ_FIX))); f_vco = (freq * (1 << p_best)) / I740_RFREQ_FIX; freq = freq / I740_RFREQ_FIX; n = 2; do { n++; m = ((f_vco * n) / I740_REF_FREQ + 2) / 4; if (m < 3) m = 3; { u32 f_out = (((m * I740_REF_FREQ * 4) / n) + ((1 << p_best) / 2)) / (1 << p_best); f_err = (freq - f_out); if (abs(f_err) < err_max) { m_best = m; n_best = n; err_best = f_err; } } } while ((abs(f_err) >= err_target) && ((n <= TARGET_MAX_N) || (abs(err_best) > err_max))); if (abs(f_err) < err_target) { m_best = m; n_best = n; } par->video_clk2_m = (m_best - 2) & 0xFF; par->video_clk2_n = (n_best - 2) & 0xFF; par->video_clk2_mn_msbs = ((((n_best - 2) >> 4) & VCO_N_MSBS) | (((m_best - 2) >> 8) & VCO_M_MSBS)); par->video_clk2_div_sel = ((p_best << 4) | REF_DIV_1); } static int i740fb_decode_var(const struct fb_var_screeninfo *var, struct i740fb_par *par, struct fb_info *info) { /* * Get the video params out of 'var'. * If a value doesn't fit, round it up, if it's too big, return -EINVAL. */ u32 xres, right, hslen, left, xtotal; u32 yres, lower, vslen, upper, ytotal; u32 vxres, xoffset, vyres, yoffset; u32 bpp, base, dacspeed24, mem; u8 r7; int i; dev_dbg(info->device, "decode_var: xres: %i, yres: %i, xres_v: %i, xres_v: %i\n", var->xres, var->yres, var->xres_virtual, var->xres_virtual); dev_dbg(info->device, " xoff: %i, yoff: %i, bpp: %i, graysc: %i\n", var->xoffset, var->yoffset, var->bits_per_pixel, var->grayscale); dev_dbg(info->device, " activate: %i, nonstd: %i, vmode: %i\n", var->activate, var->nonstd, var->vmode); dev_dbg(info->device, " pixclock: %i, hsynclen:%i, vsynclen:%i\n", var->pixclock, var->hsync_len, var->vsync_len); dev_dbg(info->device, " left: %i, right: %i, up:%i, lower:%i\n", var->left_margin, var->right_margin, var->upper_margin, var->lower_margin); bpp = var->bits_per_pixel; switch (bpp) { case 1 ... 8: bpp = 8; if ((1000000 / var->pixclock) > DACSPEED8) { dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 8bpp)\n", 1000000 / var->pixclock, DACSPEED8); return -EINVAL; } break; case 9 ... 15: bpp = 15; fallthrough; case 16: if ((1000000 / var->pixclock) > DACSPEED16) { dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 15/16bpp)\n", 1000000 / var->pixclock, DACSPEED16); return -EINVAL; } break; case 17 ... 24: bpp = 24; dacspeed24 = par->has_sgram ? DACSPEED24_SG : DACSPEED24_SD; if ((1000000 / var->pixclock) > dacspeed24) { dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 24bpp)\n", 1000000 / var->pixclock, dacspeed24); return -EINVAL; } break; case 25 ... 32: bpp = 32; if ((1000000 / var->pixclock) > DACSPEED32) { dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 32bpp)\n", 1000000 / var->pixclock, DACSPEED32); return -EINVAL; } break; default: return -EINVAL; } xres = ALIGN(var->xres, 8); vxres = ALIGN(var->xres_virtual, 16); if (vxres < xres) vxres = xres; xoffset = ALIGN(var->xoffset, 8); if (xres + xoffset > vxres) xoffset = vxres - xres; left = ALIGN(var->left_margin, 8); right = ALIGN(var->right_margin, 8); hslen = ALIGN(var->hsync_len, 8); yres = var->yres; vyres = var->yres_virtual; if (yres > vyres) vyres = yres; yoffset = var->yoffset; if (yres + yoffset > vyres) yoffset = vyres - yres; lower = var->lower_margin; vslen = var->vsync_len; upper = var->upper_margin; mem = vxres * vyres * ((bpp + 1) / 8); if (mem > info->screen_size) { dev_err(info->device, "not enough video memory (%d KB requested, %ld KB available)\n", mem >> 10, info->screen_size >> 10); return -ENOMEM; } if (yoffset + yres > vyres) yoffset = vyres - yres; xtotal = xres + right + hslen + left; ytotal = yres + lower + vslen + upper; par->crtc[VGA_CRTC_H_TOTAL] = (xtotal >> 3) - 5; par->crtc[VGA_CRTC_H_DISP] = (xres >> 3) - 1; par->crtc[VGA_CRTC_H_BLANK_START] = ((xres + right) >> 3) - 1; par->crtc[VGA_CRTC_H_SYNC_START] = (xres + right) >> 3; par->crtc[VGA_CRTC_H_SYNC_END] = (((xres + right + hslen) >> 3) & 0x1F) | ((((xres + right + hslen) >> 3) & 0x20) << 2); par->crtc[VGA_CRTC_H_BLANK_END] = ((xres + right + hslen) >> 3 & 0x1F) | 0x80; par->crtc[VGA_CRTC_V_TOTAL] = ytotal - 2; r7 = 0x10; /* disable linecompare */ if (ytotal & 0x100) r7 |= 0x01; if (ytotal & 0x200) r7 |= 0x20; par->crtc[VGA_CRTC_PRESET_ROW] = 0; par->crtc[VGA_CRTC_MAX_SCAN] = 0x40; /* 1 scanline, no linecmp */ if (var->vmode & FB_VMODE_DOUBLE) par->crtc[VGA_CRTC_MAX_SCAN] |= 0x80; par->crtc[VGA_CRTC_CURSOR_START] = 0x00; par->crtc[VGA_CRTC_CURSOR_END] = 0x00; par->crtc[VGA_CRTC_CURSOR_HI] = 0x00; par->crtc[VGA_CRTC_CURSOR_LO] = 0x00; par->crtc[VGA_CRTC_V_DISP_END] = yres-1; if ((yres-1) & 0x100) r7 |= 0x02; if ((yres-1) & 0x200) r7 |= 0x40; par->crtc[VGA_CRTC_V_BLANK_START] = yres + lower - 1; par->crtc[VGA_CRTC_V_SYNC_START] = yres + lower - 1; if ((yres + lower - 1) & 0x100) r7 |= 0x0C; if ((yres + lower - 1) & 0x200) { par->crtc[VGA_CRTC_MAX_SCAN] |= 0x20; r7 |= 0x80; } /* disabled IRQ */ par->crtc[VGA_CRTC_V_SYNC_END] = ((yres + lower - 1 + vslen) & 0x0F) & ~0x10; /* 0x7F for VGA, but some SVGA chips require all 8 bits to be set */ par->crtc[VGA_CRTC_V_BLANK_END] = (yres + lower - 1 + vslen) & 0xFF; par->crtc[VGA_CRTC_UNDERLINE] = 0x00; par->crtc[VGA_CRTC_MODE] = 0xC3 ; par->crtc[VGA_CRTC_LINE_COMPARE] = 0xFF; par->crtc[VGA_CRTC_OVERFLOW] = r7; par->vss = 0x00; /* 3DA */ for (i = 0x00; i < 0x10; i++) par->atc[i] = i; par->atc[VGA_ATC_MODE] = 0x81; par->atc[VGA_ATC_OVERSCAN] = 0x00; /* 0 for EGA, 0xFF for VGA */ par->atc[VGA_ATC_PLANE_ENABLE] = 0x0F; par->atc[VGA_ATC_COLOR_PAGE] = 0x00; par->misc = 0xC3; if (var->sync & FB_SYNC_HOR_HIGH_ACT) par->misc &= ~0x40; if (var->sync & FB_SYNC_VERT_HIGH_ACT) par->misc &= ~0x80; par->seq[VGA_SEQ_CLOCK_MODE] = 0x01; par->seq[VGA_SEQ_PLANE_WRITE] = 0x0F; par->seq[VGA_SEQ_CHARACTER_MAP] = 0x00; par->seq[VGA_SEQ_MEMORY_MODE] = 0x06; par->gdc[VGA_GFX_SR_VALUE] = 0x00; par->gdc[VGA_GFX_SR_ENABLE] = 0x00; par->gdc[VGA_GFX_COMPARE_VALUE] = 0x00; par->gdc[VGA_GFX_DATA_ROTATE] = 0x00; par->gdc[VGA_GFX_PLANE_READ] = 0; par->gdc[VGA_GFX_MODE] = 0x02; par->gdc[VGA_GFX_MISC] = 0x05; par->gdc[VGA_GFX_COMPARE_MASK] = 0x0F; par->gdc[VGA_GFX_BIT_MASK] = 0xFF; base = (yoffset * vxres + (xoffset & ~7)) >> 2; switch (bpp) { case 8: par->crtc[VGA_CRTC_OFFSET] = vxres >> 3; par->ext_offset = vxres >> 11; par->pixelpipe_cfg1 = DISPLAY_8BPP_MODE; par->bitblt_cntl = COLEXP_8BPP; break; case 15: /* 0rrrrrgg gggbbbbb */ case 16: /* rrrrrggg gggbbbbb */ par->pixelpipe_cfg1 = (var->green.length == 6) ? DISPLAY_16BPP_MODE : DISPLAY_15BPP_MODE; par->crtc[VGA_CRTC_OFFSET] = vxres >> 2; par->ext_offset = vxres >> 10; par->bitblt_cntl = COLEXP_16BPP; base *= 2; break; case 24: par->crtc[VGA_CRTC_OFFSET] = (vxres * 3) >> 3; par->ext_offset = (vxres * 3) >> 11; par->pixelpipe_cfg1 = DISPLAY_24BPP_MODE; par->bitblt_cntl = COLEXP_24BPP; base &= 0xFFFFFFFE; /* ...ignore the last bit. */ base *= 3; break; case 32: par->crtc[VGA_CRTC_OFFSET] = vxres >> 1; par->ext_offset = vxres >> 9; par->pixelpipe_cfg1 = DISPLAY_32BPP_MODE; par->bitblt_cntl = COLEXP_RESERVED; /* Unimplemented on i740 */ base *= 4; break; } par->crtc[VGA_CRTC_START_LO] = base & 0x000000FF; par->crtc[VGA_CRTC_START_HI] = (base & 0x0000FF00) >> 8; par->ext_start_addr = ((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE; par->ext_start_addr_hi = (base & 0x3FC00000) >> 22; par->pixelpipe_cfg0 = DAC_8_BIT; par->pixelpipe_cfg2 = DISPLAY_GAMMA_ENABLE | OVERLAY_GAMMA_ENABLE; par->io_cntl = EXTENDED_CRTC_CNTL; par->address_mapping = LINEAR_MODE_ENABLE | PAGE_MAPPING_ENABLE; par->display_cntl = HIRES_MODE; /* Set the MCLK freq */ par->pll_cntl = PLL_MEMCLK_100000KHZ; /* 100 MHz -- use as default */ /* Calculate the extended CRTC regs */ par->ext_vert_total = (ytotal - 2) >> 8; par->ext_vert_disp_end = (yres - 1) >> 8; par->ext_vert_sync_start = (yres + lower) >> 8; par->ext_vert_blank_start = (yres + lower) >> 8; par->ext_horiz_total = ((xtotal >> 3) - 5) >> 8; par->ext_horiz_blank = (((xres + right) >> 3) & 0x40) >> 6; par->interlace_cntl = INTERLACE_DISABLE; /* Set the overscan color to 0. (NOTE: This only affects >8bpp mode) */ par->atc[VGA_ATC_OVERSCAN] = 0; /* Calculate VCLK that most closely matches the requested dot clock */ i740_calc_vclk((((u32)1e9) / var->pixclock) * (u32)(1e3), par); /* Since we program the clocks ourselves, always use VCLK2. */ par->misc |= 0x0C; /* Calculate the FIFO Watermark and Burst Length. */ par->lmi_fifo_watermark = i740_calc_fifo(par, 1000000 / var->pixclock, bpp); return 0; } static int i740fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { switch (var->bits_per_pixel) { case 8: var->red.offset = var->green.offset = var->blue.offset = 0; var->red.length = var->green.length = var->blue.length = 8; break; case 16: switch (var->green.length) { default: case 5: var->red.offset = 10; var->green.offset = 5; var->blue.offset = 0; var->red.length = 5; var->green.length = 5; var->blue.length = 5; break; case 6: var->red.offset = 11; var->green.offset = 5; var->blue.offset = 0; var->red.length = var->blue.length = 5; break; } break; case 24: var->red.offset = 16; var->green.offset = 8; var->blue.offset = 0; var->red.length = var->green.length = var->blue.length = 8; break; case 32: var->transp.offset = 24; var->red.offset = 16; var->green.offset = 8; var->blue.offset = 0; var->transp.length = 8; var->red.length = var->green.length = var->blue.length = 8; break; default: return -EINVAL; } if (var->xres > var->xres_virtual) var->xres_virtual = var->xres; if (var->yres > var->yres_virtual) var->yres_virtual = var->yres; if (info->monspecs.hfmax && info->monspecs.vfmax && info->monspecs.dclkmax && fb_validate_mode(var, info) < 0) return -EINVAL; return 0; } static void vga_protect(struct i740fb_par *par) { /* disable the display */ i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0x20, 0x20); i740inb(par, 0x3DA); i740outb(par, VGA_ATT_W, 0x00); /* enable palette access */ } static void vga_unprotect(struct i740fb_par *par) { /* reenable display */ i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0, 0x20); i740inb(par, 0x3DA); i740outb(par, VGA_ATT_W, 0x20); /* disable palette access */ } static int i740fb_set_par(struct fb_info *info) { struct i740fb_par *par = info->par; u32 itemp; int i; i = i740fb_decode_var(&info->var, par, info); if (i) return i; memset(info->screen_base, 0, info->screen_size); vga_protect(par); i740outreg(par, XRX, DRAM_EXT_CNTL, DRAM_REFRESH_DISABLE); mdelay(1); i740outreg(par, XRX, VCLK2_VCO_M, par->video_clk2_m); i740outreg(par, XRX, VCLK2_VCO_N, par->video_clk2_n); i740outreg(par, XRX, VCLK2_VCO_MN_MSBS, par->video_clk2_mn_msbs); i740outreg(par, XRX, VCLK2_VCO_DIV_SEL, par->video_clk2_div_sel); i740outreg_mask(par, XRX, PIXPIPE_CONFIG_0, par->pixelpipe_cfg0 & DAC_8_BIT, 0x80); i740inb(par, 0x3DA); i740outb(par, 0x3C0, 0x00); /* update misc output register */ i740outb(par, VGA_MIS_W, par->misc | 0x01); /* synchronous reset on */ i740outreg(par, VGA_SEQ_I, VGA_SEQ_RESET, 0x01); /* write sequencer registers */ i740outreg(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, par->seq[VGA_SEQ_CLOCK_MODE] | 0x20); for (i = 2; i < VGA_SEQ_C; i++) i740outreg(par, VGA_SEQ_I, i, par->seq[i]); /* synchronous reset off */ i740outreg(par, VGA_SEQ_I, VGA_SEQ_RESET, 0x03); /* deprotect CRT registers 0-7 */ i740outreg(par, VGA_CRT_IC, VGA_CRTC_V_SYNC_END, par->crtc[VGA_CRTC_V_SYNC_END]); /* write CRT registers */ for (i = 0; i < VGA_CRT_C; i++) i740outreg(par, VGA_CRT_IC, i, par->crtc[i]); /* write graphics controller registers */ for (i = 0; i < VGA_GFX_C; i++) i740outreg(par, VGA_GFX_I, i, par->gdc[i]); /* write attribute controller registers */ for (i = 0; i < VGA_ATT_C; i++) { i740inb(par, VGA_IS1_RC); /* reset flip-flop */ i740outb(par, VGA_ATT_IW, i); i740outb(par, VGA_ATT_IW, par->atc[i]); } i740inb(par, VGA_IS1_RC); i740outb(par, VGA_ATT_IW, 0x20); i740outreg(par, VGA_CRT_IC, EXT_VERT_TOTAL, par->ext_vert_total); i740outreg(par, VGA_CRT_IC, EXT_VERT_DISPLAY, par->ext_vert_disp_end); i740outreg(par, VGA_CRT_IC, EXT_VERT_SYNC_START, par->ext_vert_sync_start); i740outreg(par, VGA_CRT_IC, EXT_VERT_BLANK_START, par->ext_vert_blank_start); i740outreg(par, VGA_CRT_IC, EXT_HORIZ_TOTAL, par->ext_horiz_total); i740outreg(par, VGA_CRT_IC, EXT_HORIZ_BLANK, par->ext_horiz_blank); i740outreg(par, VGA_CRT_IC, EXT_OFFSET, par->ext_offset); i740outreg(par, VGA_CRT_IC, EXT_START_ADDR_HI, par->ext_start_addr_hi); i740outreg(par, VGA_CRT_IC, EXT_START_ADDR, par->ext_start_addr); i740outreg_mask(par, VGA_CRT_IC, INTERLACE_CNTL, par->interlace_cntl, INTERLACE_ENABLE); i740outreg_mask(par, XRX, ADDRESS_MAPPING, par->address_mapping, 0x1F); i740outreg_mask(par, XRX, BITBLT_CNTL, par->bitblt_cntl, COLEXP_MODE); i740outreg_mask(par, XRX, DISPLAY_CNTL, par->display_cntl, VGA_WRAP_MODE | GUI_MODE); i740outreg_mask(par, XRX, PIXPIPE_CONFIG_0, par->pixelpipe_cfg0, 0x9B); i740outreg_mask(par, XRX, PIXPIPE_CONFIG_2, par->pixelpipe_cfg2, 0x0C); i740outreg(par, XRX, PLL_CNTL, par->pll_cntl); i740outreg_mask(par, XRX, PIXPIPE_CONFIG_1, par->pixelpipe_cfg1, DISPLAY_COLOR_MODE); itemp = readl(par->regs + FWATER_BLC); itemp &= ~(LMI_BURST_LENGTH | LMI_FIFO_WATERMARK); itemp |= par->lmi_fifo_watermark; writel(itemp, par->regs + FWATER_BLC); i740outreg(par, XRX, DRAM_EXT_CNTL, DRAM_REFRESH_60HZ); i740outreg_mask(par, MRX, COL_KEY_CNTL_1, 0, BLANK_DISP_OVERLAY); i740outreg_mask(par, XRX, IO_CTNL, par->io_cntl, EXTENDED_ATTR_CNTL | EXTENDED_CRTC_CNTL); if (par->pixelpipe_cfg1 != DISPLAY_8BPP_MODE) { i740outb(par, VGA_PEL_MSK, 0xFF); i740outb(par, VGA_PEL_IW, 0x00); for (i = 0; i < 256; i++) { itemp = (par->pixelpipe_cfg0 & DAC_8_BIT) ? i : i >> 2; i740outb(par, VGA_PEL_D, itemp); i740outb(par, VGA_PEL_D, itemp); i740outb(par, VGA_PEL_D, itemp); } } /* Wait for screen to stabilize. */ mdelay(50); vga_unprotect(par); info->fix.line_length = info->var.xres_virtual * info->var.bits_per_pixel / 8; if (info->var.bits_per_pixel == 8) info->fix.visual = FB_VISUAL_PSEUDOCOLOR; else info->fix.visual = FB_VISUAL_TRUECOLOR; return 0; } static int i740fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *info) { u32 r, g, b; dev_dbg(info->device, "setcolreg: regno: %i, red=%d, green=%d, blue=%d, transp=%d, bpp=%d\n", regno, red, green, blue, transp, info->var.bits_per_pixel); switch (info->fix.visual) { case FB_VISUAL_PSEUDOCOLOR: if (regno >= 256) return -EINVAL; i740outb(info->par, VGA_PEL_IW, regno); i740outb(info->par, VGA_PEL_D, red >> 8); i740outb(info->par, VGA_PEL_D, green >> 8); i740outb(info->par, VGA_PEL_D, blue >> 8); break; case FB_VISUAL_TRUECOLOR: if (regno >= 16) return -EINVAL; r = (red >> (16 - info->var.red.length)) << info->var.red.offset; b = (blue >> (16 - info->var.blue.length)) << info->var.blue.offset; g = (green >> (16 - info->var.green.length)) << info->var.green.offset; ((u32 *) info->pseudo_palette)[regno] = r | g | b; break; default: return -EINVAL; } return 0; } static int i740fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) { struct i740fb_par *par = info->par; u32 base = (var->yoffset * info->var.xres_virtual + (var->xoffset & ~7)) >> 2; dev_dbg(info->device, "pan_display: xoffset: %i yoffset: %i base: %i\n", var->xoffset, var->yoffset, base); switch (info->var.bits_per_pixel) { case 8: break; case 15: case 16: base *= 2; break; case 24: /* * The last bit does not seem to have any effect on the start * address register in 24bpp mode, so... */ base &= 0xFFFFFFFE; /* ...ignore the last bit. */ base *= 3; break; case 32: base *= 4; break; } par->crtc[VGA_CRTC_START_LO] = base & 0x000000FF; par->crtc[VGA_CRTC_START_HI] = (base & 0x0000FF00) >> 8; par->ext_start_addr_hi = (base & 0x3FC00000) >> 22; par->ext_start_addr = ((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE; i740outreg(par, VGA_CRT_IC, VGA_CRTC_START_LO, base & 0x000000FF); i740outreg(par, VGA_CRT_IC, VGA_CRTC_START_HI, (base & 0x0000FF00) >> 8); i740outreg(par, VGA_CRT_IC, EXT_START_ADDR_HI, (base & 0x3FC00000) >> 22); i740outreg(par, VGA_CRT_IC, EXT_START_ADDR, ((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE); return 0; } static int i740fb_blank(int blank_mode, struct fb_info *info) { struct i740fb_par *par = info->par; unsigned char SEQ01; int DPMSSyncSelect; switch (blank_mode) { case FB_BLANK_UNBLANK: case FB_BLANK_NORMAL: SEQ01 = 0x00; DPMSSyncSelect = HSYNC_ON | VSYNC_ON; break; case FB_BLANK_VSYNC_SUSPEND: SEQ01 = 0x20; DPMSSyncSelect = HSYNC_ON | VSYNC_OFF; break; case FB_BLANK_HSYNC_SUSPEND: SEQ01 = 0x20; DPMSSyncSelect = HSYNC_OFF | VSYNC_ON; break; case FB_BLANK_POWERDOWN: SEQ01 = 0x20; DPMSSyncSelect = HSYNC_OFF | VSYNC_OFF; break; default: return -EINVAL; } /* Turn the screen on/off */ i740outb(par, SRX, 0x01); SEQ01 |= i740inb(par, SRX + 1) & ~0x20; i740outb(par, SRX, 0x01); i740outb(par, SRX + 1, SEQ01); /* Set the DPMS mode */ i740outreg(par, XRX, DPMS_SYNC_SELECT, DPMSSyncSelect); /* Let fbcon do a soft blank for us */ return (blank_mode == FB_BLANK_NORMAL) ? 1 : 0; } static const struct fb_ops i740fb_ops = { .owner = THIS_MODULE, .fb_open = i740fb_open, .fb_release = i740fb_release, .fb_check_var = i740fb_check_var, .fb_set_par = i740fb_set_par, .fb_setcolreg = i740fb_setcolreg, .fb_blank = i740fb_blank, .fb_pan_display = i740fb_pan_display, .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit, }; /* ------------------------------------------------------------------------- */ static int i740fb_probe(struct pci_dev *dev, const struct pci_device_id *ent) { struct fb_info *info; struct i740fb_par *par; int ret, tmp; bool found = false; u8 *edid; info = framebuffer_alloc(sizeof(struct i740fb_par), &(dev->dev)); if (!info) return -ENOMEM; par = info->par; mutex_init(&par->open_lock); info->var.activate = FB_ACTIVATE_NOW; info->var.bits_per_pixel = 8; info->fbops = &i740fb_ops; info->pseudo_palette = par->pseudo_palette; ret = pci_enable_device(dev); if (ret) { dev_err(info->device, "cannot enable PCI device\n"); goto err_enable_device; } ret = pci_request_regions(dev, info->fix.id); if (ret) { dev_err(info->device, "error requesting regions\n"); goto err_request_regions; } info->screen_base = pci_ioremap_wc_bar(dev, 0); if (!info->screen_base) { dev_err(info->device, "error remapping base\n"); ret = -ENOMEM; goto err_ioremap_1; } par->regs = pci_ioremap_bar(dev, 1); if (!par->regs) { dev_err(info->device, "error remapping MMIO\n"); ret = -ENOMEM; goto err_ioremap_2; } /* detect memory size */ if ((i740inreg(par, XRX, DRAM_ROW_TYPE) & DRAM_ROW_1) == DRAM_ROW_1_SDRAM) i740outb(par, XRX, DRAM_ROW_BNDRY_1); else i740outb(par, XRX, DRAM_ROW_BNDRY_0); info->screen_size = i740inb(par, XRX + 1) * 1024 * 1024; /* detect memory type */ tmp = i740inreg(par, XRX, DRAM_ROW_CNTL_LO); par->has_sgram = !((tmp & DRAM_RAS_TIMING) || (tmp & DRAM_RAS_PRECHARGE)); fb_info(info, "Intel740 on %s, %ld KB %s\n", pci_name(dev), info->screen_size >> 10, par->has_sgram ? "SGRAM" : "SDRAM"); info->fix = i740fb_fix; info->fix.mmio_start = pci_resource_start(dev, 1); info->fix.mmio_len = pci_resource_len(dev, 1); info->fix.smem_start = pci_resource_start(dev, 0); info->fix.smem_len = info->screen_size; info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; if (i740fb_setup_ddc_bus(info) == 0) { par->ddc_registered = true; edid = fb_ddc_read(&par->ddc_adapter); if (edid) { fb_edid_to_monspecs(edid, &info->monspecs); kfree(edid); if (!info->monspecs.modedb) dev_err(info->device, "error getting mode database\n"); else { const struct fb_videomode *m; fb_videomode_to_modelist( info->monspecs.modedb, info->monspecs.modedb_len, &info->modelist); m = fb_find_best_display(&info->monspecs, &info->modelist); if (m) { fb_videomode_to_var(&info->var, m); /* fill all other info->var's fields */ if (!i740fb_check_var(&info->var, info)) found = true; } } } } if (!mode_option && !found) mode_option = "640x480-8@60"; if (mode_option) { ret = fb_find_mode(&info->var, info, mode_option, info->monspecs.modedb, info->monspecs.modedb_len, NULL, info->var.bits_per_pixel); if (!ret || ret == 4) { dev_err(info->device, "mode %s not found\n", mode_option); ret = -EINVAL; } } fb_destroy_modedb(info->monspecs.modedb); info->monspecs.modedb = NULL; /* maximize virtual vertical size for fast scrolling */ info->var.yres_virtual = info->fix.smem_len * 8 / (info->var.bits_per_pixel * info->var.xres_virtual); if (ret == -EINVAL) goto err_find_mode; ret = fb_alloc_cmap(&info->cmap, 256, 0); if (ret) { dev_err(info->device, "cannot allocate colormap\n"); goto err_alloc_cmap; } ret = register_framebuffer(info); if (ret) { dev_err(info->device, "error registering framebuffer\n"); goto err_reg_framebuffer; } fb_info(info, "%s frame buffer device\n", info->fix.id); pci_set_drvdata(dev, info); if (mtrr) par->wc_cookie = arch_phys_wc_add(info->fix.smem_start, info->fix.smem_len); return 0; err_reg_framebuffer: fb_dealloc_cmap(&info->cmap); err_alloc_cmap: err_find_mode: if (par->ddc_registered) i2c_del_adapter(&par->ddc_adapter); pci_iounmap(dev, par->regs); err_ioremap_2: pci_iounmap(dev, info->screen_base); err_ioremap_1: pci_release_regions(dev); err_request_regions: /* pci_disable_device(dev); */ err_enable_device: framebuffer_release(info); return ret; } static void i740fb_remove(struct pci_dev *dev) { struct fb_info *info = pci_get_drvdata(dev); if (info) { struct i740fb_par *par = info->par; arch_phys_wc_del(par->wc_cookie); unregister_framebuffer(info); fb_dealloc_cmap(&info->cmap); if (par->ddc_registered) i2c_del_adapter(&par->ddc_adapter); pci_iounmap(dev, par->regs); pci_iounmap(dev, info->screen_base); pci_release_regions(dev); /* pci_disable_device(dev); */ framebuffer_release(info); } } static int __maybe_unused i740fb_suspend(struct device *dev) { struct fb_info *info = dev_get_drvdata(dev); struct i740fb_par *par = info->par; console_lock(); mutex_lock(&(par->open_lock)); /* do nothing if framebuffer is not active */ if (par->ref_count == 0) { mutex_unlock(&(par->open_lock)); console_unlock(); return 0; } fb_set_suspend(info, 1); mutex_unlock(&(par->open_lock)); console_unlock(); return 0; } static int __maybe_unused i740fb_resume(struct device *dev) { struct fb_info *info = dev_get_drvdata(dev); struct i740fb_par *par = info->par; console_lock(); mutex_lock(&(par->open_lock)); if (par->ref_count == 0) goto fail; i740fb_set_par(info); fb_set_suspend(info, 0); fail: mutex_unlock(&(par->open_lock)); console_unlock(); return 0; } static const struct dev_pm_ops i740fb_pm_ops = { #ifdef CONFIG_PM_SLEEP .suspend = i740fb_suspend, .resume = i740fb_resume, .freeze = NULL, .thaw = i740fb_resume, .poweroff = i740fb_suspend, .restore = i740fb_resume, #endif /* CONFIG_PM_SLEEP */ }; #define I740_ID_PCI 0x00d1 #define I740_ID_AGP 0x7800 static const struct pci_device_id i740fb_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, I740_ID_PCI) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, I740_ID_AGP) }, { 0 } }; MODULE_DEVICE_TABLE(pci, i740fb_id_table); static struct pci_driver i740fb_driver = { .name = "i740fb", .id_table = i740fb_id_table, .probe = i740fb_probe, .remove = i740fb_remove, .driver.pm = &i740fb_pm_ops, }; #ifndef MODULE static int __init i740fb_setup(char *options) { char *opt; if (!options || !*options) return 0; while ((opt = strsep(&options, ",")) != NULL) { if (!*opt) continue; else if (!strncmp(opt, "mtrr:", 5)) mtrr = simple_strtoul(opt + 5, NULL, 0); else mode_option = opt; } return 0; } #endif static int __init i740fb_init(void) { #ifndef MODULE char *option = NULL; if (fb_get_options("i740fb", &option)) return -ENODEV; i740fb_setup(option); #endif return pci_register_driver(&i740fb_driver); } static void __exit i740fb_exit(void) { pci_unregister_driver(&i740fb_driver); } module_init(i740fb_init); module_exit(i740fb_exit); MODULE_AUTHOR("(c) 2011 Ondrej Zary <linux@rainbow-software.org>"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("fbdev driver for Intel740"); module_param(mode_option, charp, 0444); MODULE_PARM_DESC(mode_option, "Default video mode ('640x480-8@60', etc)"); module_param(mtrr, int, 0444); MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1