Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Phillip Potter | 801 | 94.91% | 1 | 16.67% |
Michael Straube | 41 | 4.86% | 4 | 66.67% |
Larry Finger | 2 | 0.24% | 1 | 16.67% |
Total | 844 | 6 |
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* Copyright(c) 2007 - 2011 Realtek Corporation. */ #ifndef __RTL8188E_HAL_H__ #define __RTL8188E_HAL_H__ /* include HAL Related header after HAL Related compiling flags */ #include "rtl8188e_spec.h" #include "Hal8188EPhyReg.h" #include "Hal8188EPhyCfg.h" #include "rtl8188e_rf.h" #include "rtl8188e_dm.h" #include "rtl8188e_recv.h" #include "rtl8188e_xmit.h" #include "rtl8188e_cmd.h" #include "rtw_efuse.h" #include "odm_types.h" #include "odm.h" #include "odm_HWConfig.h" #include "odm_RegDefine11N.h" #include "HalPhyRf_8188e.h" #include "Hal8188ERateAdaptive.h" #include "HalHWImg8188E_MAC.h" #include "HalHWImg8188E_RF.h" #include "HalHWImg8188E_BB.h" #include "odm_RegConfig8188E.h" #include "odm_RTL8188E.h" /* RTL8188E Power Configuration CMDs for USB/SDIO interfaces */ #define Rtl8188E_NIC_PWR_ON_FLOW rtl8188E_power_on_flow #define Rtl8188E_NIC_DISABLE_FLOW rtl8188E_card_disable_flow #define Rtl8188E_NIC_LPS_ENTER_FLOW rtl8188E_enter_lps_flow #define DRVINFO_SZ 4 /* unit is 8bytes */ #define PageNum_128(_Len) (u32)(((_Len)>>7) + ((_Len) & 0x7F ? 1 : 0)) /* download firmware related data structure */ #define FW_8188E_SIZE 0x4000 /* 16384,16k */ #define FW_8188E_START_ADDRESS 0x1000 #define MAX_PAGE_SIZE 4096 /* @ page : 4k bytes */ #define IS_FW_HEADER_EXIST(_pFwHdr) \ ((le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x92C0 || \ (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88C0 || \ (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x2300 || \ (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88E0) /* This structure must be careful with byte-ordering */ struct rt_firmware_hdr { /* 8-byte alinment required */ /* LONG WORD 0 ---- */ __le16 Signature; /* 92C0: test chip; 92C, * 88C0: test chip; 88C1: MP A-cut; * 92C1: MP A-cut */ u8 Category; /* AP/NIC and USB/PCI */ u8 Function; /* Reserved for different FW function * indcation, for further use when * driver needs to download different * FW for different conditions */ __le16 Version; /* FW Version */ u8 Subversion; /* FW Subversion, default 0x00 */ u16 Rsvd1; /* LONG WORD 1 ---- */ u8 Month; /* Release time Month field */ u8 Date; /* Release time Date field */ u8 Hour; /* Release time Hour field */ u8 Minute; /* Release time Minute field */ __le16 RamCodeSize; /* The size of RAM code */ u8 Foundry; u8 Rsvd2; /* LONG WORD 2 ---- */ __le32 SvnIdx; /* The SVN entry index */ u32 Rsvd3; /* LONG WORD 3 ---- */ u32 Rsvd4; u32 Rsvd5; }; #define DRIVER_EARLY_INT_TIME 0x05 #define BCN_DMA_ATIME_INT_TIME 0x02 enum usb_rx_agg_mode { USB_RX_AGG_DISABLE, USB_RX_AGG_DMA, USB_RX_AGG_USB, USB_RX_AGG_MIX }; #define MAX_RX_DMA_BUFFER_SIZE_88E \ 0x2400 /* 9k for 88E nornal chip , MaxRxBuff=10k-max(TxReportSize(64*8), * WOLPattern(16*24)) */ #define TX_SELE_HQ BIT(0) /* High Queue */ #define TX_SELE_LQ BIT(1) /* Low Queue */ #define TX_SELE_NQ BIT(2) /* Normal Queue */ /* Note: We will divide number of page equally for each queue other * than public queue! */ /* 22k = 22528 bytes = 176 pages (@page = 128 bytes) */ /* must reserved about 7 pages for LPS => 176-7 = 169 (0xA9) */ /* 2*BCN / 1*ps-poll / 1*null-data /1*prob_rsp /1*QOS null-data /1*BT QOS * null-data */ #define TX_TOTAL_PAGE_NUMBER_88E 0xA9/* 169 (21632=> 21k) */ #define TX_PAGE_BOUNDARY_88E (TX_TOTAL_PAGE_NUMBER_88E + 1) /* Note: For Normal Chip Setting ,modify later */ #define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER \ TX_TOTAL_PAGE_NUMBER_88E /* 0xA9 , 0xb0=>176=>22k */ #define WMM_NORMAL_TX_PAGE_BOUNDARY_88E \ (WMM_NORMAL_TX_TOTAL_PAGE_NUMBER + 1) /* 0xA9 */ #include "HalVerDef.h" #include "hal_com.h" /* Channel Plan */ enum ChannelPlan { CHPL_FCC = 0, CHPL_IC = 1, CHPL_ETSI = 2, CHPL_SPA = 3, CHPL_FRANCE = 4, CHPL_MKK = 5, CHPL_MKK1 = 6, CHPL_ISRAEL = 7, CHPL_TELEC = 8, CHPL_GLOBAL = 9, CHPL_WORLD = 10, }; struct txpowerinfo24g { u8 IndexCCK_Base[RF_PATH_MAX][MAX_CHNL_GROUP_24G]; u8 IndexBW40_Base[RF_PATH_MAX][MAX_CHNL_GROUP_24G]; /* If only one tx, only BW20 and OFDM are used. */ s8 CCK_Diff[RF_PATH_MAX][MAX_TX_COUNT]; s8 OFDM_Diff[RF_PATH_MAX][MAX_TX_COUNT]; s8 BW20_Diff[RF_PATH_MAX][MAX_TX_COUNT]; s8 BW40_Diff[RF_PATH_MAX][MAX_TX_COUNT]; }; #define EFUSE_REAL_CONTENT_LEN 512 #define AVAILABLE_EFUSE_ADDR(addr) (addr < EFUSE_REAL_CONTENT_LEN) #define EFUSE_REAL_CONTENT_LEN_88E 256 #define EFUSE_MAP_LEN_88E 512 #define EFUSE_MAX_SECTION_88E 64 /* To prevent out of boundary programming case, leave 1byte and program * full section */ /* 9bytes + 1byt + 5bytes and pre 1byte. */ /* For worst case: */ /* | 2byte|----8bytes----|1byte|--7bytes--| 92D */ /* PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte. */ #define EFUSE_OOB_PROTECT_BYTES_88E 18 #define EFUSE_PROTECT_BYTES_BANK 16 struct hal_data_8188e { struct HAL_VERSION VersionID; u16 FirmwareVersion; u16 FirmwareVersionRev; u16 FirmwareSubVersion; u16 FirmwareSignature; u8 PGMaxGroup; /* current WIFI_PHY values */ u32 ReceiveConfig; enum ht_channel_width CurrentChannelBW; u8 CurrentChannel; u8 nCur40MhzPrimeSC;/* Control channel sub-carrier */ u16 BasicRateSet; u8 EEPROMRegulatory; u8 EEPROMThermalMeter; u8 Index24G_CCK_Base[CHANNEL_MAX_NUMBER]; u8 Index24G_BW40_Base[CHANNEL_MAX_NUMBER]; /* If only one tx, only BW20 and OFDM are used. */ s8 OFDM_24G_Diff[MAX_TX_COUNT]; s8 BW20_24G_Diff[MAX_TX_COUNT]; /* HT 20<->40 Pwr diff */ u8 TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; /* For HT<->legacy pwr diff */ u8 TxPwrLegacyHtDiff[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; /* For power group */ u8 PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; u8 PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; /* The current Tx Power Level */ u8 CurrentCckTxPwrIdx; u8 CurrentOfdm24GTxPwrIdx; u8 CurrentBW2024GTxPwrIdx; u8 CurrentBW4024GTxPwrIdx; /* Read/write are allow for following hardware information variables */ u8 pwrGroupCnt; u32 MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16]; u8 CrystalCap; u8 ExternalPA; u32 AcParam_BE; /* Original parameter for BE, use for EDCA turbo. */ struct bb_reg_def PHYRegDef[2]; /* Radio A/B */ u32 RfRegChnlVal[2]; /* for host message to fw */ u8 LastHMEBoxNum; u8 fw_ractrl; u8 RegFwHwTxQCtrl; u8 RegReg542; u8 RegCR_1; struct dm_priv dmpriv; struct odm_dm_struct odmpriv; u8 CurAntenna; u8 AntDivCfg; u8 TRxAntDivType; u8 bDumpRxPkt;/* for debug */ u8 bDumpTxPkt;/* for debug */ u8 OutEpQueueSel; u8 OutEpNumber; u16 EfuseUsedBytes; struct P2P_PS_Offload_t p2p_ps_offload; /* Auto FSM to Turn On, include clock, isolation, power control * for MAC only */ u8 bMacPwrCtrlOn; u32 UsbBulkOutSize; u8 UsbTxAggMode; u8 UsbTxAggDescNum; enum usb_rx_agg_mode UsbRxAggMode; u8 UsbRxAggBlockCount; /* USB Block count. Block size is * 512-byte in high speed and 64-byte * in full speed */ u8 UsbRxAggBlockTimeout; u8 UsbRxAggPageCount; /* 8192C DMA page count */ u8 UsbRxAggPageTimeout; }; /* rtl8188e_hal_init.c */ s32 rtl8188e_FirmwareDownload(struct adapter *padapter); void _8051Reset88E(struct adapter *padapter); void rtl8188e_InitializeFirmwareVars(struct adapter *padapter); s32 InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy); /* EFuse */ u8 GetEEPROMSize8188E(struct adapter *padapter); void Hal_EfuseParseIDCode88E(struct adapter *padapter, u8 *hwinfo); void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail); void rtl8188e_EfuseParseChnlPlan(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail); void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter,u8 *PROMContent, bool AutoLoadFail); void Hal_ReadThermalMeter_88E(struct adapter * dapter, u8 *PROMContent, bool AutoloadFail); void Hal_EfuseParseXtal_8188E(struct adapter *pAdapter, u8 *hwinfo, bool AutoLoadFail); void Hal_ReadPowerSavingMode88E(struct adapter *pAdapter, u8 *hwinfo, bool AutoLoadFail); void rtl8188e_read_chip_version(struct adapter *padapter); s32 rtl8188e_iol_efuse_patch(struct adapter *padapter); void rtw_cancel_all_timer(struct adapter *padapter); #endif /* __RTL8188E_HAL_H__ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1