Contributors: 14
Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
Ilya Yanok |
849 |
86.72% |
1 |
4.00% |
Shawn Guo |
70 |
7.15% |
6 |
24.00% |
Uwe Kleine-König |
20 |
2.04% |
5 |
20.00% |
Boris Brezillon |
13 |
1.33% |
3 |
12.00% |
Russell King |
5 |
0.51% |
1 |
4.00% |
Marek Vašut |
5 |
0.51% |
1 |
4.00% |
Vladimir Zapolskiy |
5 |
0.51% |
1 |
4.00% |
Johannes Berg |
3 |
0.31% |
1 |
4.00% |
Thomas Gleixner |
2 |
0.20% |
1 |
4.00% |
Stephen Warren |
2 |
0.20% |
1 |
4.00% |
Fabio Estevam |
2 |
0.20% |
1 |
4.00% |
Benoît Thébaudeau |
1 |
0.10% |
1 |
4.00% |
Sascha Hauer |
1 |
0.10% |
1 |
4.00% |
Nico Pitre |
1 |
0.10% |
1 |
4.00% |
Total |
979 |
|
25 |
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/memory.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/platnand.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/page.h>
#include <asm/setup.h>
#include "common.h"
#include "devices-imx31.h"
#include "hardware.h"
#include "iomux-mx3.h"
/* FPGA defines */
#define QONG_FPGA_VERSION(major, minor, rev) \
(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR
#define QONG_FPGA_PERIPH_SIZE (1 << 24)
#define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR
#define QONG_FPGA_CTRL_SIZE 0x10
/* FPGA control registers */
#define QONG_FPGA_CTRL_VERSION 0x00
#define QONG_DNET_ID 1
#define QONG_DNET_BASEADDR \
(QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
#define QONG_DNET_SIZE 0x00001000
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static int uart_pins[] = {
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1
};
static inline void __init mxc_init_imx_uart(void)
{
mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
"uart-0");
imx31_add_imx_uart0(&uart_pdata);
}
static struct resource dnet_resources[] = {
{
.name = "dnet-memory",
.start = QONG_DNET_BASEADDR,
.end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
.flags = IORESOURCE_MEM,
}, {
/* irq number is run-time assigned */
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dnet_device = {
.name = "dnet",
.id = -1,
.num_resources = ARRAY_SIZE(dnet_resources),
.resource = dnet_resources,
};
static int __init qong_init_dnet(void)
{
int ret;
dnet_resources[1].start =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1));
dnet_resources[1].end =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1));
ret = platform_device_register(&dnet_device);
return ret;
}
/* MTD NOR flash */
static struct physmap_flash_data qong_flash_data = {
.width = 2,
};
static struct resource qong_flash_resource = {
.start = MX31_CS0_BASE_ADDR,
.end = MX31_CS0_BASE_ADDR + SZ_128M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device qong_nor_mtd_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &qong_flash_data,
},
.resource = &qong_flash_resource,
.num_resources = 1,
};
static void qong_init_nor_mtd(void)
{
(void)platform_device_register(&qong_nor_mtd_device);
}
/*
* Hardware specific access to control-lines
*/
static void qong_nand_cmd_ctrl(struct nand_chip *nand_chip, int cmd,
unsigned int ctrl)
{
if (cmd == NAND_CMD_NONE)
return;
if (ctrl & NAND_CLE)
writeb(cmd, nand_chip->legacy.IO_ADDR_W + (1 << 24));
else
writeb(cmd, nand_chip->legacy.IO_ADDR_W + (1 << 23));
}
/*
* Read the Device Ready pin.
*/
static int qong_nand_device_ready(struct nand_chip *chip)
{
return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB));
}
static void qong_nand_select_chip(struct nand_chip *chip, int cs)
{
if (cs >= 0)
gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
else
gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1);
}
static struct platform_nand_data qong_nand_data = {
.chip = {
.nr_chips = 1,
.chip_delay = 20,
.options = 0,
},
.ctrl = {
.cmd_ctrl = qong_nand_cmd_ctrl,
.dev_ready = qong_nand_device_ready,
.select_chip = qong_nand_select_chip,
}
};
static struct resource qong_nand_resource = {
.start = MX31_CS3_BASE_ADDR,
.end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device qong_nand_device = {
.name = "gen_nand",
.id = -1,
.dev = {
.platform_data = &qong_nand_data,
},
.num_resources = 1,
.resource = &qong_nand_resource,
};
static void __init qong_init_nand_mtd(void)
{
/* init CS */
imx_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
imx_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
imx_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
/* enable pin */
mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO));
if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable"))
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
/* ready/busy pin */
mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO));
if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy"))
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB));
/* write protect pin */
mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO));
if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp"))
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B));
platform_device_register(&qong_nand_device);
}
static void __init qong_init_fpga(void)
{
void __iomem *regs;
u32 fpga_ver;
regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE);
if (!regs) {
printk(KERN_ERR "%s: failed to map registers, aborting.\n",
__func__);
return;
}
fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION);
iounmap(regs);
printk(KERN_INFO "Qong FPGA version %d.%d.%d\n",
(fpga_ver & 0xF000) >> 12,
(fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF);
if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) {
printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based "
"devices won't be registered!\n");
return;
}
/* register FPGA-based devices */
qong_init_nand_mtd();
qong_init_dnet();
}
/*
* Board specific initialization.
*/
static void __init qong_init(void)
{
imx31_soc_init();
mxc_init_imx_uart();
qong_init_nor_mtd();
imx31_add_imx2_wdt();
}
static void __init qong_timer_init(void)
{
mx31_clocks_init(26000000);
}
MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
/* Maintainer: DENX Software Engineering GmbH */
.atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.init_time = qong_timer_init,
.init_machine = qong_init,
.init_late = qong_init_fpga,
.restart = mxc_restart,
MACHINE_END