Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Russell King | 4838 | 65.89% | 49 | 51.04% |
Linus Walleij | 554 | 7.54% | 3 | 3.12% |
Tomasz Figa | 483 | 6.58% | 3 | 3.12% |
Gregory CLEMENT | 191 | 2.60% | 2 | 2.08% |
Rob Herring | 170 | 2.32% | 2 | 2.08% |
Arnd Bergmann | 162 | 2.21% | 2 | 2.08% |
Barry Song | 122 | 1.66% | 2 | 2.08% |
Brad Mouring | 107 | 1.46% | 1 | 1.04% |
Thomas Petazzoni | 101 | 1.38% | 1 | 1.04% |
Hauke Mehrtens | 98 | 1.33% | 1 | 1.04% |
Catalin Marinas | 95 | 1.29% | 4 | 4.17% |
Jason McMullan | 85 | 1.16% | 1 | 1.04% |
Sebastian Hesselbarth | 51 | 0.69% | 1 | 1.04% |
Christian Daudt | 43 | 0.59% | 2 | 2.08% |
Chris Brandt | 40 | 0.54% | 1 | 1.04% |
Fabio Estevam | 38 | 0.52% | 3 | 3.12% |
Florian Fainelli | 33 | 0.45% | 1 | 1.04% |
Geert Uytterhoeven | 23 | 0.31% | 2 | 2.08% |
Richard Cochran | 23 | 0.31% | 1 | 1.04% |
Santosh Shilimkar | 17 | 0.23% | 2 | 2.08% |
Will Deacon | 14 | 0.19% | 2 | 2.08% |
Mark Rutland | 13 | 0.18% | 1 | 1.04% |
Yilu Mao | 10 | 0.14% | 1 | 1.04% |
Marek Szyprowski | 8 | 0.11% | 1 | 1.04% |
Sascha Hauer | 8 | 0.11% | 1 | 1.04% |
Srinidhi Kasagar | 7 | 0.10% | 1 | 1.04% |
Thomas Gleixner | 4 | 0.05% | 3 | 3.12% |
Fabrice Gasnier | 3 | 0.04% | 1 | 1.04% |
Andrey Smirnov | 2 | 0.03% | 1 | 1.04% |
Total | 7343 | 96 |
// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mm/cache-l2x0.c - L210/L220/L310 cache controller support * * Copyright (C) 2007 ARM Limited */ #include <linux/cpu.h> #include <linux/err.h> #include <linux/init.h> #include <linux/smp.h> #include <linux/spinlock.h> #include <linux/log2.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> #include <asm/cacheflush.h> #include <asm/cp15.h> #include <asm/cputype.h> #include <asm/hardware/cache-l2x0.h> #include "cache-tauros3.h" #include "cache-aurora-l2.h" struct l2c_init_data { const char *type; unsigned way_size_0; unsigned num_lock; void (*of_parse)(const struct device_node *, u32 *, u32 *); void (*enable)(void __iomem *, unsigned); void (*fixup)(void __iomem *, u32, struct outer_cache_fns *); void (*save)(void __iomem *); void (*configure)(void __iomem *); void (*unlock)(void __iomem *, unsigned); struct outer_cache_fns outer_cache; }; #define CACHE_LINE_SIZE 32 static void __iomem *l2x0_base; static const struct l2c_init_data *l2x0_data; static DEFINE_RAW_SPINLOCK(l2x0_lock); static u32 l2x0_way_mask; /* Bitmask of active ways */ static u32 l2x0_size; static unsigned long sync_reg_offset = L2X0_CACHE_SYNC; struct l2x0_regs l2x0_saved_regs; static bool l2x0_bresp_disable; static bool l2x0_flz_disable; /* * Common code for all cache controllers. */ static inline void l2c_wait_mask(void __iomem *reg, unsigned long mask) { /* wait for cache operation by line or way to complete */ while (readl_relaxed(reg) & mask) cpu_relax(); } /* * By default, we write directly to secure registers. Platforms must * override this if they are running non-secure. */ static void l2c_write_sec(unsigned long val, void __iomem *base, unsigned reg) { if (val == readl_relaxed(base + reg)) return; if (outer_cache.write_sec) outer_cache.write_sec(val, reg); else writel_relaxed(val, base + reg); } /* * This should only be called when we have a requirement that the * register be written due to a work-around, as platforms running * in non-secure mode may not be able to access this register. */ static inline void l2c_set_debug(void __iomem *base, unsigned long val) { l2c_write_sec(val, base, L2X0_DEBUG_CTRL); } static void __l2c_op_way(void __iomem *reg) { writel_relaxed(l2x0_way_mask, reg); l2c_wait_mask(reg, l2x0_way_mask); } static inline void l2c_unlock(void __iomem *base, unsigned num) { unsigned i; for (i = 0; i < num; i++) { writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_D_BASE + i * L2X0_LOCKDOWN_STRIDE); writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_I_BASE + i * L2X0_LOCKDOWN_STRIDE); } } static void l2c_configure(void __iomem *base) { l2c_write_sec(l2x0_saved_regs.aux_ctrl, base, L2X0_AUX_CTRL); } /* * Enable the L2 cache controller. This function must only be * called when the cache controller is known to be disabled. */ static void l2c_enable(void __iomem *base, unsigned num_lock) { unsigned long flags; if (outer_cache.configure) outer_cache.configure(&l2x0_saved_regs); else l2x0_data->configure(base); l2x0_data->unlock(base, num_lock); local_irq_save(flags); __l2c_op_way(base + L2X0_INV_WAY); writel_relaxed(0, base + sync_reg_offset); l2c_wait_mask(base + sync_reg_offset, 1); local_irq_restore(flags); l2c_write_sec(L2X0_CTRL_EN, base, L2X0_CTRL); } static void l2c_disable(void) { void __iomem *base = l2x0_base; l2x0_pmu_suspend(); outer_cache.flush_all(); l2c_write_sec(0, base, L2X0_CTRL); dsb(st); } static void l2c_save(void __iomem *base) { l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); } static void l2c_resume(void) { void __iomem *base = l2x0_base; /* Do not touch the controller if already enabled. */ if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) l2c_enable(base, l2x0_data->num_lock); l2x0_pmu_resume(); } /* * L2C-210 specific code. * * The L2C-2x0 PA, set/way and sync operations are atomic, but we must * ensure that no background operation is running. The way operations * are all background tasks. * * While a background operation is in progress, any new operation is * ignored (unspecified whether this causes an error.) Thankfully, not * used on SMP. * * Never has a different sync register other than L2X0_CACHE_SYNC, but * we use sync_reg_offset here so we can share some of this with L2C-310. */ static void __l2c210_cache_sync(void __iomem *base) { writel_relaxed(0, base + sync_reg_offset); } static void __l2c210_op_pa_range(void __iomem *reg, unsigned long start, unsigned long end) { while (start < end) { writel_relaxed(start, reg); start += CACHE_LINE_SIZE; } } static void l2c210_inv_range(unsigned long start, unsigned long end) { void __iomem *base = l2x0_base; if (start & (CACHE_LINE_SIZE - 1)) { start &= ~(CACHE_LINE_SIZE - 1); writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA); start += CACHE_LINE_SIZE; } if (end & (CACHE_LINE_SIZE - 1)) { end &= ~(CACHE_LINE_SIZE - 1); writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA); } __l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end); __l2c210_cache_sync(base); } static void l2c210_clean_range(unsigned long start, unsigned long end) { void __iomem *base = l2x0_base; start &= ~(CACHE_LINE_SIZE - 1); __l2c210_op_pa_range(base + L2X0_CLEAN_LINE_PA, start, end); __l2c210_cache_sync(base); } static void l2c210_flush_range(unsigned long start, unsigned long end) { void __iomem *base = l2x0_base; start &= ~(CACHE_LINE_SIZE - 1); __l2c210_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA, start, end); __l2c210_cache_sync(base); } static void l2c210_flush_all(void) { void __iomem *base = l2x0_base; BUG_ON(!irqs_disabled()); __l2c_op_way(base + L2X0_CLEAN_INV_WAY); __l2c210_cache_sync(base); } static void l2c210_sync(void) { __l2c210_cache_sync(l2x0_base); } static const struct l2c_init_data l2c210_data __initconst = { .type = "L2C-210", .way_size_0 = SZ_8K, .num_lock = 1, .enable = l2c_enable, .save = l2c_save, .configure = l2c_configure, .unlock = l2c_unlock, .outer_cache = { .inv_range = l2c210_inv_range, .clean_range = l2c210_clean_range, .flush_range = l2c210_flush_range, .flush_all = l2c210_flush_all, .disable = l2c_disable, .sync = l2c210_sync, .resume = l2c_resume, }, }; /* * L2C-220 specific code. * * All operations are background operations: they have to be waited for. * Conflicting requests generate a slave error (which will cause an * imprecise abort.) Never uses sync_reg_offset, so we hard-code the * sync register here. * * However, we can re-use the l2c210_resume call. */ static inline void __l2c220_cache_sync(void __iomem *base) { writel_relaxed(0, base + L2X0_CACHE_SYNC); l2c_wait_mask(base + L2X0_CACHE_SYNC, 1); } static void l2c220_op_way(void __iomem *base, unsigned reg) { unsigned long flags; raw_spin_lock_irqsave(&l2x0_lock, flags); __l2c_op_way(base + reg); __l2c220_cache_sync(base); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static unsigned long l2c220_op_pa_range(void __iomem *reg, unsigned long start, unsigned long end, unsigned long flags) { raw_spinlock_t *lock = &l2x0_lock; while (start < end) { unsigned long blk_end = start + min(end - start, 4096UL); while (start < blk_end) { l2c_wait_mask(reg, 1); writel_relaxed(start, reg); start += CACHE_LINE_SIZE; } if (blk_end < end) { raw_spin_unlock_irqrestore(lock, flags); raw_spin_lock_irqsave(lock, flags); } } return flags; } static void l2c220_inv_range(unsigned long start, unsigned long end) { void __iomem *base = l2x0_base; unsigned long flags; raw_spin_lock_irqsave(&l2x0_lock, flags); if ((start | end) & (CACHE_LINE_SIZE - 1)) { if (start & (CACHE_LINE_SIZE - 1)) { start &= ~(CACHE_LINE_SIZE - 1); writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA); start += CACHE_LINE_SIZE; } if (end & (CACHE_LINE_SIZE - 1)) { end &= ~(CACHE_LINE_SIZE - 1); l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1); writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA); } } flags = l2c220_op_pa_range(base + L2X0_INV_LINE_PA, start, end, flags); l2c_wait_mask(base + L2X0_INV_LINE_PA, 1); __l2c220_cache_sync(base); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2c220_clean_range(unsigned long start, unsigned long end) { void __iomem *base = l2x0_base; unsigned long flags; start &= ~(CACHE_LINE_SIZE - 1); if ((end - start) >= l2x0_size) { l2c220_op_way(base, L2X0_CLEAN_WAY); return; } raw_spin_lock_irqsave(&l2x0_lock, flags); flags = l2c220_op_pa_range(base + L2X0_CLEAN_LINE_PA, start, end, flags); l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1); __l2c220_cache_sync(base); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2c220_flush_range(unsigned long start, unsigned long end) { void __iomem *base = l2x0_base; unsigned long flags; start &= ~(CACHE_LINE_SIZE - 1); if ((end - start) >= l2x0_size) { l2c220_op_way(base, L2X0_CLEAN_INV_WAY); return; } raw_spin_lock_irqsave(&l2x0_lock, flags); flags = l2c220_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA, start, end, flags); l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1); __l2c220_cache_sync(base); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2c220_flush_all(void) { l2c220_op_way(l2x0_base, L2X0_CLEAN_INV_WAY); } static void l2c220_sync(void) { unsigned long flags; raw_spin_lock_irqsave(&l2x0_lock, flags); __l2c220_cache_sync(l2x0_base); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void l2c220_enable(void __iomem *base, unsigned num_lock) { /* * Always enable non-secure access to the lockdown registers - * we write to them as part of the L2C enable sequence so they * need to be accessible. */ l2x0_saved_regs.aux_ctrl |= L220_AUX_CTRL_NS_LOCKDOWN; l2c_enable(base, num_lock); } static void l2c220_unlock(void __iomem *base, unsigned num_lock) { if (readl_relaxed(base + L2X0_AUX_CTRL) & L220_AUX_CTRL_NS_LOCKDOWN) l2c_unlock(base, num_lock); } static const struct l2c_init_data l2c220_data = { .type = "L2C-220", .way_size_0 = SZ_8K, .num_lock = 1, .enable = l2c220_enable, .save = l2c_save, .configure = l2c_configure, .unlock = l2c220_unlock, .outer_cache = { .inv_range = l2c220_inv_range, .clean_range = l2c220_clean_range, .flush_range = l2c220_flush_range, .flush_all = l2c220_flush_all, .disable = l2c_disable, .sync = l2c220_sync, .resume = l2c_resume, }, }; /* * L2C-310 specific code. * * Very similar to L2C-210, the PA, set/way and sync operations are atomic, * and the way operations are all background tasks. However, issuing an * operation while a background operation is in progress results in a * SLVERR response. We can reuse: * * __l2c210_cache_sync (using sync_reg_offset) * l2c210_sync * l2c210_inv_range (if 588369 is not applicable) * l2c210_clean_range * l2c210_flush_range (if 588369 is not applicable) * l2c210_flush_all (if 727915 is not applicable) * * Errata: * 588369: PL310 R0P0->R1P0, fixed R2P0. * Affects: all clean+invalidate operations * clean and invalidate skips the invalidate step, so we need to issue * separate operations. We also require the above debug workaround * enclosing this code fragment on affected parts. On unaffected parts, * we must not use this workaround without the debug register writes * to avoid exposing a problem similar to 727915. * * 727915: PL310 R2P0->R3P0, fixed R3P1. * Affects: clean+invalidate by way * clean and invalidate by way runs in the background, and a store can * hit the line between the clean operation and invalidate operation, * resulting in the store being lost. * * 752271: PL310 R3P0->R3P1-50REL0, fixed R3P2. * Affects: 8x64-bit (double fill) line fetches * double fill line fetches can fail to cause dirty data to be evicted * from the cache before the new data overwrites the second line. * * 753970: PL310 R3P0, fixed R3P1. * Affects: sync * prevents merging writes after the sync operation, until another L2C * operation is performed (or a number of other conditions.) * * 769419: PL310 R0P0->R3P1, fixed R3P2. * Affects: store buffer * store buffer is not automatically drained. */ static void l2c310_inv_range_erratum(unsigned long start, unsigned long end) { void __iomem *base = l2x0_base; if ((start | end) & (CACHE_LINE_SIZE - 1)) { unsigned long flags; /* Erratum 588369 for both clean+invalidate operations */ raw_spin_lock_irqsave(&l2x0_lock, flags); l2c_set_debug(base, 0x03); if (start & (CACHE_LINE_SIZE - 1)) { start &= ~(CACHE_LINE_SIZE - 1); writel_relaxed(start, base + L2X0_CLEAN_LINE_PA); writel_relaxed(start, base + L2X0_INV_LINE_PA); start += CACHE_LINE_SIZE; } if (end & (CACHE_LINE_SIZE - 1)) { end &= ~(CACHE_LINE_SIZE - 1); writel_relaxed(end, base + L2X0_CLEAN_LINE_PA); writel_relaxed(end, base + L2X0_INV_LINE_PA); } l2c_set_debug(base, 0x00); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } __l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end); __l2c210_cache_sync(base); } static void l2c310_flush_range_erratum(unsigned long start, unsigned long end) { raw_spinlock_t *lock = &l2x0_lock; unsigned long flags; void __iomem *base = l2x0_base; raw_spin_lock_irqsave(lock, flags); while (start < end) { unsigned long blk_end = start + min(end - start, 4096UL); l2c_set_debug(base, 0x03); while (start < blk_end) { writel_relaxed(start, base + L2X0_CLEAN_LINE_PA); writel_relaxed(start, base + L2X0_INV_LINE_PA); start += CACHE_LINE_SIZE; } l2c_set_debug(base, 0x00); if (blk_end < end) { raw_spin_unlock_irqrestore(lock, flags); raw_spin_lock_irqsave(lock, flags); } } raw_spin_unlock_irqrestore(lock, flags); __l2c210_cache_sync(base); } static void l2c310_flush_all_erratum(void) { void __iomem *base = l2x0_base; unsigned long flags; raw_spin_lock_irqsave(&l2x0_lock, flags); l2c_set_debug(base, 0x03); __l2c_op_way(base + L2X0_CLEAN_INV_WAY); l2c_set_debug(base, 0x00); __l2c210_cache_sync(base); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void __init l2c310_save(void __iomem *base) { unsigned revision; l2c_save(base); l2x0_saved_regs.tag_latency = readl_relaxed(base + L310_TAG_LATENCY_CTRL); l2x0_saved_regs.data_latency = readl_relaxed(base + L310_DATA_LATENCY_CTRL); l2x0_saved_regs.filter_end = readl_relaxed(base + L310_ADDR_FILTER_END); l2x0_saved_regs.filter_start = readl_relaxed(base + L310_ADDR_FILTER_START); revision = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK; /* From r2p0, there is Prefetch offset/control register */ if (revision >= L310_CACHE_ID_RTL_R2P0) l2x0_saved_regs.prefetch_ctrl = readl_relaxed(base + L310_PREFETCH_CTRL); /* From r3p0, there is Power control register */ if (revision >= L310_CACHE_ID_RTL_R3P0) l2x0_saved_regs.pwr_ctrl = readl_relaxed(base + L310_POWER_CTRL); } static void l2c310_configure(void __iomem *base) { unsigned revision; l2c_configure(base); /* restore pl310 setup */ l2c_write_sec(l2x0_saved_regs.tag_latency, base, L310_TAG_LATENCY_CTRL); l2c_write_sec(l2x0_saved_regs.data_latency, base, L310_DATA_LATENCY_CTRL); l2c_write_sec(l2x0_saved_regs.filter_end, base, L310_ADDR_FILTER_END); l2c_write_sec(l2x0_saved_regs.filter_start, base, L310_ADDR_FILTER_START); revision = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK; if (revision >= L310_CACHE_ID_RTL_R2P0) l2c_write_sec(l2x0_saved_regs.prefetch_ctrl, base, L310_PREFETCH_CTRL); if (revision >= L310_CACHE_ID_RTL_R3P0) l2c_write_sec(l2x0_saved_regs.pwr_ctrl, base, L310_POWER_CTRL); } static int l2c310_starting_cpu(unsigned int cpu) { set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); return 0; } static int l2c310_dying_cpu(unsigned int cpu) { set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1))); return 0; } static void __init l2c310_enable(void __iomem *base, unsigned num_lock) { unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK; bool cortex_a9 = read_cpuid_part() == ARM_CPU_PART_CORTEX_A9; u32 aux = l2x0_saved_regs.aux_ctrl; if (rev >= L310_CACHE_ID_RTL_R2P0) { if (cortex_a9 && !l2x0_bresp_disable) { aux |= L310_AUX_CTRL_EARLY_BRESP; pr_info("L2C-310 enabling early BRESP for Cortex-A9\n"); } else if (aux & L310_AUX_CTRL_EARLY_BRESP) { pr_warn("L2C-310 early BRESP only supported with Cortex-A9\n"); aux &= ~L310_AUX_CTRL_EARLY_BRESP; } } if (cortex_a9 && !l2x0_flz_disable) { u32 aux_cur = readl_relaxed(base + L2X0_AUX_CTRL); u32 acr = get_auxcr(); pr_debug("Cortex-A9 ACR=0x%08x\n", acr); if (acr & BIT(3) && !(aux_cur & L310_AUX_CTRL_FULL_LINE_ZERO)) pr_err("L2C-310: full line of zeros enabled in Cortex-A9 but not L2C-310 - invalid\n"); if (aux & L310_AUX_CTRL_FULL_LINE_ZERO && !(acr & BIT(3))) pr_err("L2C-310: enabling full line of zeros but not enabled in Cortex-A9\n"); if (!(aux & L310_AUX_CTRL_FULL_LINE_ZERO) && !outer_cache.write_sec) { aux |= L310_AUX_CTRL_FULL_LINE_ZERO; pr_info("L2C-310 full line of zeros enabled for Cortex-A9\n"); } } else if (aux & (L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP)) { pr_err("L2C-310: disabling Cortex-A9 specific feature bits\n"); aux &= ~(L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP); } /* * Always enable non-secure access to the lockdown registers - * we write to them as part of the L2C enable sequence so they * need to be accessible. */ l2x0_saved_regs.aux_ctrl = aux | L310_AUX_CTRL_NS_LOCKDOWN; l2c_enable(base, num_lock); /* Read back resulting AUX_CTRL value as it could have been altered. */ aux = readl_relaxed(base + L2X0_AUX_CTRL); if (aux & (L310_AUX_CTRL_DATA_PREFETCH | L310_AUX_CTRL_INSTR_PREFETCH)) { u32 prefetch = readl_relaxed(base + L310_PREFETCH_CTRL); pr_info("L2C-310 %s%s prefetch enabled, offset %u lines\n", aux & L310_AUX_CTRL_INSTR_PREFETCH ? "I" : "", aux & L310_AUX_CTRL_DATA_PREFETCH ? "D" : "", 1 + (prefetch & L310_PREFETCH_CTRL_OFFSET_MASK)); } /* r3p0 or later has power control register */ if (rev >= L310_CACHE_ID_RTL_R3P0) { u32 power_ctrl; power_ctrl = readl_relaxed(base + L310_POWER_CTRL); pr_info("L2C-310 dynamic clock gating %sabled, standby mode %sabled\n", power_ctrl & L310_DYNAMIC_CLK_GATING_EN ? "en" : "dis", power_ctrl & L310_STNDBY_MODE_EN ? "en" : "dis"); } if (aux & L310_AUX_CTRL_FULL_LINE_ZERO) cpuhp_setup_state(CPUHP_AP_ARM_L2X0_STARTING, "arm/l2x0:starting", l2c310_starting_cpu, l2c310_dying_cpu); } static void __init l2c310_fixup(void __iomem *base, u32 cache_id, struct outer_cache_fns *fns) { unsigned revision = cache_id & L2X0_CACHE_ID_RTL_MASK; const char *errata[8]; unsigned n = 0; if (IS_ENABLED(CONFIG_PL310_ERRATA_588369) && revision < L310_CACHE_ID_RTL_R2P0 && /* For bcm compatibility */ fns->inv_range == l2c210_inv_range) { fns->inv_range = l2c310_inv_range_erratum; fns->flush_range = l2c310_flush_range_erratum; errata[n++] = "588369"; } if (IS_ENABLED(CONFIG_PL310_ERRATA_727915) && revision >= L310_CACHE_ID_RTL_R2P0 && revision < L310_CACHE_ID_RTL_R3P1) { fns->flush_all = l2c310_flush_all_erratum; errata[n++] = "727915"; } if (revision >= L310_CACHE_ID_RTL_R3P0 && revision < L310_CACHE_ID_RTL_R3P2) { u32 val = l2x0_saved_regs.prefetch_ctrl; if (val & L310_PREFETCH_CTRL_DBL_LINEFILL) { val &= ~L310_PREFETCH_CTRL_DBL_LINEFILL; l2x0_saved_regs.prefetch_ctrl = val; errata[n++] = "752271"; } } if (IS_ENABLED(CONFIG_PL310_ERRATA_753970) && revision == L310_CACHE_ID_RTL_R3P0) { sync_reg_offset = L2X0_DUMMY_REG; errata[n++] = "753970"; } if (IS_ENABLED(CONFIG_PL310_ERRATA_769419)) errata[n++] = "769419"; if (n) { unsigned i; pr_info("L2C-310 errat%s", n > 1 ? "a" : "um"); for (i = 0; i < n; i++) pr_cont(" %s", errata[i]); pr_cont(" enabled\n"); } } static void l2c310_disable(void) { /* * If full-line-of-zeros is enabled, we must first disable it in the * Cortex-A9 auxiliary control register before disabling the L2 cache. */ if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO) set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1))); l2c_disable(); } static void l2c310_resume(void) { l2c_resume(); /* Re-enable full-line-of-zeros for Cortex-A9 */ if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO) set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); } static void l2c310_unlock(void __iomem *base, unsigned num_lock) { if (readl_relaxed(base + L2X0_AUX_CTRL) & L310_AUX_CTRL_NS_LOCKDOWN) l2c_unlock(base, num_lock); } static const struct l2c_init_data l2c310_init_fns __initconst = { .type = "L2C-310", .way_size_0 = SZ_8K, .num_lock = 8, .enable = l2c310_enable, .fixup = l2c310_fixup, .save = l2c310_save, .configure = l2c310_configure, .unlock = l2c310_unlock, .outer_cache = { .inv_range = l2c210_inv_range, .clean_range = l2c210_clean_range, .flush_range = l2c210_flush_range, .flush_all = l2c210_flush_all, .disable = l2c310_disable, .sync = l2c210_sync, .resume = l2c310_resume, }, }; static int __init __l2c_init(const struct l2c_init_data *data, u32 aux_val, u32 aux_mask, u32 cache_id, bool nosync) { struct outer_cache_fns fns; unsigned way_size_bits, ways; u32 aux, old_aux; /* * Save the pointer globally so that callbacks which do not receive * context from callers can access the structure. */ l2x0_data = kmemdup(data, sizeof(*data), GFP_KERNEL); if (!l2x0_data) return -ENOMEM; /* * Sanity check the aux values. aux_mask is the bits we preserve * from reading the hardware register, and aux_val is the bits we * set. */ if (aux_val & aux_mask) pr_alert("L2C: platform provided aux values permit register corruption.\n"); old_aux = aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); aux &= aux_mask; aux |= aux_val; if (old_aux != aux) pr_warn("L2C: DT/platform modifies aux control register: 0x%08x -> 0x%08x\n", old_aux, aux); /* Determine the number of ways */ switch (cache_id & L2X0_CACHE_ID_PART_MASK) { case L2X0_CACHE_ID_PART_L310: if ((aux_val | ~aux_mask) & (L2C_AUX_CTRL_WAY_SIZE_MASK | L310_AUX_CTRL_ASSOCIATIVITY_16)) pr_warn("L2C: DT/platform tries to modify or specify cache size\n"); if (aux & (1 << 16)) ways = 16; else ways = 8; break; case L2X0_CACHE_ID_PART_L210: case L2X0_CACHE_ID_PART_L220: ways = (aux >> 13) & 0xf; break; case AURORA_CACHE_ID: ways = (aux >> 13) & 0xf; ways = 2 << ((ways + 1) >> 2); break; default: /* Assume unknown chips have 8 ways */ ways = 8; break; } l2x0_way_mask = (1 << ways) - 1; /* * way_size_0 is the size that a way_size value of zero would be * given the calculation: way_size = way_size_0 << way_size_bits. * So, if way_size_bits=0 is reserved, but way_size_bits=1 is 16k, * then way_size_0 would be 8k. * * L2 cache size = number of ways * way size. */ way_size_bits = (aux & L2C_AUX_CTRL_WAY_SIZE_MASK) >> L2C_AUX_CTRL_WAY_SIZE_SHIFT; l2x0_size = ways * (data->way_size_0 << way_size_bits); fns = data->outer_cache; fns.write_sec = outer_cache.write_sec; fns.configure = outer_cache.configure; if (data->fixup) data->fixup(l2x0_base, cache_id, &fns); if (nosync) { pr_info("L2C: disabling outer sync\n"); fns.sync = NULL; } /* * Check if l2x0 controller is already enabled. If we are booting * in non-secure mode accessing the below registers will fault. */ if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { l2x0_saved_regs.aux_ctrl = aux; data->enable(l2x0_base, data->num_lock); } outer_cache = fns; /* * It is strange to save the register state before initialisation, * but hey, this is what the DT implementations decided to do. */ if (data->save) data->save(l2x0_base); /* Re-read it in case some bits are reserved. */ aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); pr_info("%s cache controller enabled, %d ways, %d kB\n", data->type, ways, l2x0_size >> 10); pr_info("%s: CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n", data->type, cache_id, aux); l2x0_pmu_register(l2x0_base, cache_id); return 0; } void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) { const struct l2c_init_data *data; u32 cache_id; l2x0_base = base; cache_id = readl_relaxed(base + L2X0_CACHE_ID); switch (cache_id & L2X0_CACHE_ID_PART_MASK) { default: case L2X0_CACHE_ID_PART_L210: data = &l2c210_data; break; case L2X0_CACHE_ID_PART_L220: data = &l2c220_data; break; case L2X0_CACHE_ID_PART_L310: data = &l2c310_init_fns; break; } /* Read back current (default) hardware configuration */ if (data->save) data->save(l2x0_base); __l2c_init(data, aux_val, aux_mask, cache_id, false); } #ifdef CONFIG_OF static int l2_wt_override; /* Aurora don't have the cache ID register available, so we have to * pass it though the device tree */ static u32 cache_id_part_number_from_dt; /** * l2x0_cache_size_of_parse() - read cache size parameters from DT * @np: the device tree node for the l2 cache * @aux_val: pointer to machine-supplied auxilary register value, to * be augmented by the call (bits to be set to 1) * @aux_mask: pointer to machine-supplied auxilary register mask, to * be augmented by the call (bits to be set to 0) * @associativity: variable to return the calculated associativity in * @max_way_size: the maximum size in bytes for the cache ways */ static int __init l2x0_cache_size_of_parse(const struct device_node *np, u32 *aux_val, u32 *aux_mask, u32 *associativity, u32 max_way_size) { u32 mask = 0, val = 0; u32 cache_size = 0, sets = 0; u32 way_size_bits = 1; u32 way_size = 0; u32 block_size = 0; u32 line_size = 0; of_property_read_u32(np, "cache-size", &cache_size); of_property_read_u32(np, "cache-sets", &sets); of_property_read_u32(np, "cache-block-size", &block_size); of_property_read_u32(np, "cache-line-size", &line_size); if (!cache_size || !sets) return -ENODEV; /* All these l2 caches have the same line = block size actually */ if (!line_size) { if (block_size) { /* If linesize is not given, it is equal to blocksize */ line_size = block_size; } else { /* Fall back to known size */ pr_warn("L2C OF: no cache block/line size given: " "falling back to default size %d bytes\n", CACHE_LINE_SIZE); line_size = CACHE_LINE_SIZE; } } if (line_size != CACHE_LINE_SIZE) pr_warn("L2C OF: DT supplied line size %d bytes does " "not match hardware line size of %d bytes\n", line_size, CACHE_LINE_SIZE); /* * Since: * set size = cache size / sets * ways = cache size / (sets * line size) * way size = cache size / (cache size / (sets * line size)) * way size = sets * line size * associativity = ways = cache size / way size */ way_size = sets * line_size; *associativity = cache_size / way_size; if (way_size > max_way_size) { pr_err("L2C OF: set size %dKB is too large\n", way_size); return -EINVAL; } pr_info("L2C OF: override cache size: %d bytes (%dKB)\n", cache_size, cache_size >> 10); pr_info("L2C OF: override line size: %d bytes\n", line_size); pr_info("L2C OF: override way size: %d bytes (%dKB)\n", way_size, way_size >> 10); pr_info("L2C OF: override associativity: %d\n", *associativity); /* * Calculates the bits 17:19 to set for way size: * 512KB -> 6, 256KB -> 5, ... 16KB -> 1 */ way_size_bits = ilog2(way_size >> 10) - 3; if (way_size_bits < 1 || way_size_bits > 6) { pr_err("L2C OF: cache way size illegal: %dKB is not mapped\n", way_size); return -EINVAL; } mask |= L2C_AUX_CTRL_WAY_SIZE_MASK; val |= (way_size_bits << L2C_AUX_CTRL_WAY_SIZE_SHIFT); *aux_val &= ~mask; *aux_val |= val; *aux_mask &= ~mask; return 0; } static void __init l2x0_of_parse(const struct device_node *np, u32 *aux_val, u32 *aux_mask) { u32 data[2] = { 0, 0 }; u32 tag = 0; u32 dirty = 0; u32 val = 0, mask = 0; u32 assoc; int ret; of_property_read_u32(np, "arm,tag-latency", &tag); if (tag) { mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK; val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT; } of_property_read_u32_array(np, "arm,data-latency", data, ARRAY_SIZE(data)); if (data[0] && data[1]) { mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK | L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK; val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) | ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT); } of_property_read_u32(np, "arm,dirty-latency", &dirty); if (dirty) { mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK; val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT; } if (of_property_read_bool(np, "arm,parity-enable")) { mask &= ~L2C_AUX_CTRL_PARITY_ENABLE; val |= L2C_AUX_CTRL_PARITY_ENABLE; } else if (of_property_read_bool(np, "arm,parity-disable")) { mask &= ~L2C_AUX_CTRL_PARITY_ENABLE; } if (of_property_read_bool(np, "arm,shared-override")) { mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE; val |= L2C_AUX_CTRL_SHARED_OVERRIDE; } ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_256K); if (ret) return; if (assoc > 8) { pr_err("l2x0 of: cache setting yield too high associativity\n"); pr_err("l2x0 of: %d calculated, max 8\n", assoc); } else { mask |= L2X0_AUX_CTRL_ASSOC_MASK; val |= (assoc << L2X0_AUX_CTRL_ASSOC_SHIFT); } *aux_val &= ~mask; *aux_val |= val; *aux_mask &= ~mask; } static const struct l2c_init_data of_l2c210_data __initconst = { .type = "L2C-210", .way_size_0 = SZ_8K, .num_lock = 1, .of_parse = l2x0_of_parse, .enable = l2c_enable, .save = l2c_save, .configure = l2c_configure, .unlock = l2c_unlock, .outer_cache = { .inv_range = l2c210_inv_range, .clean_range = l2c210_clean_range, .flush_range = l2c210_flush_range, .flush_all = l2c210_flush_all, .disable = l2c_disable, .sync = l2c210_sync, .resume = l2c_resume, }, }; static const struct l2c_init_data of_l2c220_data __initconst = { .type = "L2C-220", .way_size_0 = SZ_8K, .num_lock = 1, .of_parse = l2x0_of_parse, .enable = l2c220_enable, .save = l2c_save, .configure = l2c_configure, .unlock = l2c220_unlock, .outer_cache = { .inv_range = l2c220_inv_range, .clean_range = l2c220_clean_range, .flush_range = l2c220_flush_range, .flush_all = l2c220_flush_all, .disable = l2c_disable, .sync = l2c220_sync, .resume = l2c_resume, }, }; static void __init l2c310_of_parse(const struct device_node *np, u32 *aux_val, u32 *aux_mask) { u32 data[3] = { 0, 0, 0 }; u32 tag[3] = { 0, 0, 0 }; u32 filter[2] = { 0, 0 }; u32 assoc; u32 prefetch; u32 power; u32 val; int ret; of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag)); if (tag[0] && tag[1] && tag[2]) l2x0_saved_regs.tag_latency = L310_LATENCY_CTRL_RD(tag[0] - 1) | L310_LATENCY_CTRL_WR(tag[1] - 1) | L310_LATENCY_CTRL_SETUP(tag[2] - 1); of_property_read_u32_array(np, "arm,data-latency", data, ARRAY_SIZE(data)); if (data[0] && data[1] && data[2]) l2x0_saved_regs.data_latency = L310_LATENCY_CTRL_RD(data[0] - 1) | L310_LATENCY_CTRL_WR(data[1] - 1) | L310_LATENCY_CTRL_SETUP(data[2] - 1); of_property_read_u32_array(np, "arm,filter-ranges", filter, ARRAY_SIZE(filter)); if (filter[1]) { l2x0_saved_regs.filter_end = ALIGN(filter[0] + filter[1], SZ_1M); l2x0_saved_regs.filter_start = (filter[0] & ~(SZ_1M - 1)) | L310_ADDR_FILTER_EN; } ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_512K); if (!ret) { switch (assoc) { case 16: *aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK; *aux_val |= L310_AUX_CTRL_ASSOCIATIVITY_16; *aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK; break; case 8: *aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK; *aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK; break; default: pr_err("L2C-310 OF cache associativity %d invalid, only 8 or 16 permitted\n", assoc); break; } } if (of_property_read_bool(np, "arm,shared-override")) { *aux_val |= L2C_AUX_CTRL_SHARED_OVERRIDE; *aux_mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE; } if (of_property_read_bool(np, "arm,parity-enable")) { *aux_val |= L2C_AUX_CTRL_PARITY_ENABLE; *aux_mask &= ~L2C_AUX_CTRL_PARITY_ENABLE; } else if (of_property_read_bool(np, "arm,parity-disable")) { *aux_val &= ~L2C_AUX_CTRL_PARITY_ENABLE; *aux_mask &= ~L2C_AUX_CTRL_PARITY_ENABLE; } if (of_property_read_bool(np, "arm,early-bresp-disable")) l2x0_bresp_disable = true; if (of_property_read_bool(np, "arm,full-line-zero-disable")) l2x0_flz_disable = true; prefetch = l2x0_saved_regs.prefetch_ctrl; ret = of_property_read_u32(np, "arm,double-linefill", &val); if (ret == 0) { if (val) prefetch |= L310_PREFETCH_CTRL_DBL_LINEFILL; else prefetch &= ~L310_PREFETCH_CTRL_DBL_LINEFILL; } else if (ret != -EINVAL) { pr_err("L2C-310 OF arm,double-linefill property value is missing\n"); } ret = of_property_read_u32(np, "arm,double-linefill-incr", &val); if (ret == 0) { if (val) prefetch |= L310_PREFETCH_CTRL_DBL_LINEFILL_INCR; else prefetch &= ~L310_PREFETCH_CTRL_DBL_LINEFILL_INCR; } else if (ret != -EINVAL) { pr_err("L2C-310 OF arm,double-linefill-incr property value is missing\n"); } ret = of_property_read_u32(np, "arm,double-linefill-wrap", &val); if (ret == 0) { if (!val) prefetch |= L310_PREFETCH_CTRL_DBL_LINEFILL_WRAP; else prefetch &= ~L310_PREFETCH_CTRL_DBL_LINEFILL_WRAP; } else if (ret != -EINVAL) { pr_err("L2C-310 OF arm,double-linefill-wrap property value is missing\n"); } ret = of_property_read_u32(np, "arm,prefetch-drop", &val); if (ret == 0) { if (val) prefetch |= L310_PREFETCH_CTRL_PREFETCH_DROP; else prefetch &= ~L310_PREFETCH_CTRL_PREFETCH_DROP; } else if (ret != -EINVAL) { pr_err("L2C-310 OF arm,prefetch-drop property value is missing\n"); } ret = of_property_read_u32(np, "arm,prefetch-offset", &val); if (ret == 0) { prefetch &= ~L310_PREFETCH_CTRL_OFFSET_MASK; prefetch |= val & L310_PREFETCH_CTRL_OFFSET_MASK; } else if (ret != -EINVAL) { pr_err("L2C-310 OF arm,prefetch-offset property value is missing\n"); } ret = of_property_read_u32(np, "prefetch-data", &val); if (ret == 0) { if (val) prefetch |= L310_PREFETCH_CTRL_DATA_PREFETCH; else prefetch &= ~L310_PREFETCH_CTRL_DATA_PREFETCH; } else if (ret != -EINVAL) { pr_err("L2C-310 OF prefetch-data property value is missing\n"); } ret = of_property_read_u32(np, "prefetch-instr", &val); if (ret == 0) { if (val) prefetch |= L310_PREFETCH_CTRL_INSTR_PREFETCH; else prefetch &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH; } else if (ret != -EINVAL) { pr_err("L2C-310 OF prefetch-instr property value is missing\n"); } l2x0_saved_regs.prefetch_ctrl = prefetch; power = l2x0_saved_regs.pwr_ctrl | L310_DYNAMIC_CLK_GATING_EN | L310_STNDBY_MODE_EN; ret = of_property_read_u32(np, "arm,dynamic-clock-gating", &val); if (!ret) { if (!val) power &= ~L310_DYNAMIC_CLK_GATING_EN; } else if (ret != -EINVAL) { pr_err("L2C-310 OF dynamic-clock-gating property value is missing or invalid\n"); } ret = of_property_read_u32(np, "arm,standby-mode", &val); if (!ret) { if (!val) power &= ~L310_STNDBY_MODE_EN; } else if (ret != -EINVAL) { pr_err("L2C-310 OF standby-mode property value is missing or invalid\n"); } l2x0_saved_regs.pwr_ctrl = power; } static const struct l2c_init_data of_l2c310_data __initconst = { .type = "L2C-310", .way_size_0 = SZ_8K, .num_lock = 8, .of_parse = l2c310_of_parse, .enable = l2c310_enable, .fixup = l2c310_fixup, .save = l2c310_save, .configure = l2c310_configure, .unlock = l2c310_unlock, .outer_cache = { .inv_range = l2c210_inv_range, .clean_range = l2c210_clean_range, .flush_range = l2c210_flush_range, .flush_all = l2c210_flush_all, .disable = l2c310_disable, .sync = l2c210_sync, .resume = l2c310_resume, }, }; /* * This is a variant of the of_l2c310_data with .sync set to * NULL. Outer sync operations are not needed when the system is I/O * coherent, and potentially harmful in certain situations (PCIe/PL310 * deadlock on Armada 375/38x due to hardware I/O coherency). The * other operations are kept because they are infrequent (therefore do * not cause the deadlock in practice) and needed for secondary CPU * boot and other power management activities. */ static const struct l2c_init_data of_l2c310_coherent_data __initconst = { .type = "L2C-310 Coherent", .way_size_0 = SZ_8K, .num_lock = 8, .of_parse = l2c310_of_parse, .enable = l2c310_enable, .fixup = l2c310_fixup, .save = l2c310_save, .configure = l2c310_configure, .unlock = l2c310_unlock, .outer_cache = { .inv_range = l2c210_inv_range, .clean_range = l2c210_clean_range, .flush_range = l2c210_flush_range, .flush_all = l2c210_flush_all, .disable = l2c310_disable, .resume = l2c310_resume, }, }; /* * Note that the end addresses passed to Linux primitives are * noninclusive, while the hardware cache range operations use * inclusive start and end addresses. */ static unsigned long aurora_range_end(unsigned long start, unsigned long end) { /* * Limit the number of cache lines processed at once, * since cache range operations stall the CPU pipeline * until completion. */ if (end > start + MAX_RANGE_SIZE) end = start + MAX_RANGE_SIZE; /* * Cache range operations can't straddle a page boundary. */ if (end > PAGE_ALIGN(start+1)) end = PAGE_ALIGN(start+1); return end; } static void aurora_pa_range(unsigned long start, unsigned long end, unsigned long offset) { void __iomem *base = l2x0_base; unsigned long range_end; unsigned long flags; /* * round start and end adresses up to cache line size */ start &= ~(CACHE_LINE_SIZE - 1); end = ALIGN(end, CACHE_LINE_SIZE); /* * perform operation on all full cache lines between 'start' and 'end' */ while (start < end) { range_end = aurora_range_end(start, end); raw_spin_lock_irqsave(&l2x0_lock, flags); writel_relaxed(start, base + AURORA_RANGE_BASE_ADDR_REG); writel_relaxed(range_end - CACHE_LINE_SIZE, base + offset); raw_spin_unlock_irqrestore(&l2x0_lock, flags); writel_relaxed(0, base + AURORA_SYNC_REG); start = range_end; } } static void aurora_inv_range(unsigned long start, unsigned long end) { aurora_pa_range(start, end, AURORA_INVAL_RANGE_REG); } static void aurora_clean_range(unsigned long start, unsigned long end) { /* * If L2 is forced to WT, the L2 will always be clean and we * don't need to do anything here. */ if (!l2_wt_override) aurora_pa_range(start, end, AURORA_CLEAN_RANGE_REG); } static void aurora_flush_range(unsigned long start, unsigned long end) { if (l2_wt_override) aurora_pa_range(start, end, AURORA_INVAL_RANGE_REG); else aurora_pa_range(start, end, AURORA_FLUSH_RANGE_REG); } static void aurora_flush_all(void) { void __iomem *base = l2x0_base; unsigned long flags; /* clean all ways */ raw_spin_lock_irqsave(&l2x0_lock, flags); __l2c_op_way(base + L2X0_CLEAN_INV_WAY); raw_spin_unlock_irqrestore(&l2x0_lock, flags); writel_relaxed(0, base + AURORA_SYNC_REG); } static void aurora_cache_sync(void) { writel_relaxed(0, l2x0_base + AURORA_SYNC_REG); } static void aurora_disable(void) { void __iomem *base = l2x0_base; unsigned long flags; raw_spin_lock_irqsave(&l2x0_lock, flags); __l2c_op_way(base + L2X0_CLEAN_INV_WAY); writel_relaxed(0, base + AURORA_SYNC_REG); l2c_write_sec(0, base, L2X0_CTRL); dsb(st); raw_spin_unlock_irqrestore(&l2x0_lock, flags); } static void aurora_save(void __iomem *base) { l2x0_saved_regs.ctrl = readl_relaxed(base + L2X0_CTRL); l2x0_saved_regs.aux_ctrl = readl_relaxed(base + L2X0_AUX_CTRL); } /* * For Aurora cache in no outer mode, enable via the CP15 coprocessor * broadcasting of cache commands to L2. */ static void __init aurora_enable_no_outer(void __iomem *base, unsigned num_lock) { u32 u; asm volatile("mrc p15, 1, %0, c15, c2, 0" : "=r" (u)); u |= AURORA_CTRL_FW; /* Set the FW bit */ asm volatile("mcr p15, 1, %0, c15, c2, 0" : : "r" (u)); isb(); l2c_enable(base, num_lock); } static void __init aurora_fixup(void __iomem *base, u32 cache_id, struct outer_cache_fns *fns) { sync_reg_offset = AURORA_SYNC_REG; } static void __init aurora_of_parse(const struct device_node *np, u32 *aux_val, u32 *aux_mask) { u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU; u32 mask = AURORA_ACR_REPLACEMENT_MASK; of_property_read_u32(np, "cache-id-part", &cache_id_part_number_from_dt); /* Determine and save the write policy */ l2_wt_override = of_property_read_bool(np, "wt-override"); if (l2_wt_override) { val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY; mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK; } *aux_val &= ~mask; *aux_val |= val; *aux_mask &= ~mask; } static const struct l2c_init_data of_aurora_with_outer_data __initconst = { .type = "Aurora", .way_size_0 = SZ_4K, .num_lock = 4, .of_parse = aurora_of_parse, .enable = l2c_enable, .fixup = aurora_fixup, .save = aurora_save, .configure = l2c_configure, .unlock = l2c_unlock, .outer_cache = { .inv_range = aurora_inv_range, .clean_range = aurora_clean_range, .flush_range = aurora_flush_range, .flush_all = aurora_flush_all, .disable = aurora_disable, .sync = aurora_cache_sync, .resume = l2c_resume, }, }; static const struct l2c_init_data of_aurora_no_outer_data __initconst = { .type = "Aurora", .way_size_0 = SZ_4K, .num_lock = 4, .of_parse = aurora_of_parse, .enable = aurora_enable_no_outer, .fixup = aurora_fixup, .save = aurora_save, .configure = l2c_configure, .unlock = l2c_unlock, .outer_cache = { .resume = l2c_resume, }, }; /* * For certain Broadcom SoCs, depending on the address range, different offsets * need to be added to the address before passing it to L2 for * invalidation/clean/flush * * Section Address Range Offset EMI * 1 0x00000000 - 0x3FFFFFFF 0x80000000 VC * 2 0x40000000 - 0xBFFFFFFF 0x40000000 SYS * 3 0xC0000000 - 0xFFFFFFFF 0x80000000 VC * * When the start and end addresses have crossed two different sections, we * need to break the L2 operation into two, each within its own section. * For example, if we need to invalidate addresses starts at 0xBFFF0000 and * ends at 0xC0001000, we need do invalidate 1) 0xBFFF0000 - 0xBFFFFFFF and 2) * 0xC0000000 - 0xC0001000 * * Note 1: * By breaking a single L2 operation into two, we may potentially suffer some * performance hit, but keep in mind the cross section case is very rare * * Note 2: * We do not need to handle the case when the start address is in * Section 1 and the end address is in Section 3, since it is not a valid use * case * * Note 3: * Section 1 in practical terms can no longer be used on rev A2. Because of * that the code does not need to handle section 1 at all. * */ #define BCM_SYS_EMI_START_ADDR 0x40000000UL #define BCM_VC_EMI_SEC3_START_ADDR 0xC0000000UL #define BCM_SYS_EMI_OFFSET 0x40000000UL #define BCM_VC_EMI_OFFSET 0x80000000UL static inline int bcm_addr_is_sys_emi(unsigned long addr) { return (addr >= BCM_SYS_EMI_START_ADDR) && (addr < BCM_VC_EMI_SEC3_START_ADDR); } static inline unsigned long bcm_l2_phys_addr(unsigned long addr) { if (bcm_addr_is_sys_emi(addr)) return addr + BCM_SYS_EMI_OFFSET; else return addr + BCM_VC_EMI_OFFSET; } static void bcm_inv_range(unsigned long start, unsigned long end) { unsigned long new_start, new_end; BUG_ON(start < BCM_SYS_EMI_START_ADDR); if (unlikely(end <= start)) return; new_start = bcm_l2_phys_addr(start); new_end = bcm_l2_phys_addr(end); /* normal case, no cross section between start and end */ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { l2c210_inv_range(new_start, new_end); return; } /* They cross sections, so it can only be a cross from section * 2 to section 3 */ l2c210_inv_range(new_start, bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); l2c210_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), new_end); } static void bcm_clean_range(unsigned long start, unsigned long end) { unsigned long new_start, new_end; BUG_ON(start < BCM_SYS_EMI_START_ADDR); if (unlikely(end <= start)) return; new_start = bcm_l2_phys_addr(start); new_end = bcm_l2_phys_addr(end); /* normal case, no cross section between start and end */ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { l2c210_clean_range(new_start, new_end); return; } /* They cross sections, so it can only be a cross from section * 2 to section 3 */ l2c210_clean_range(new_start, bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); l2c210_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), new_end); } static void bcm_flush_range(unsigned long start, unsigned long end) { unsigned long new_start, new_end; BUG_ON(start < BCM_SYS_EMI_START_ADDR); if (unlikely(end <= start)) return; if ((end - start) >= l2x0_size) { outer_cache.flush_all(); return; } new_start = bcm_l2_phys_addr(start); new_end = bcm_l2_phys_addr(end); /* normal case, no cross section between start and end */ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { l2c210_flush_range(new_start, new_end); return; } /* They cross sections, so it can only be a cross from section * 2 to section 3 */ l2c210_flush_range(new_start, bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); l2c210_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), new_end); } /* Broadcom L2C-310 start from ARMs R3P2 or later, and require no fixups */ static const struct l2c_init_data of_bcm_l2x0_data __initconst = { .type = "BCM-L2C-310", .way_size_0 = SZ_8K, .num_lock = 8, .of_parse = l2c310_of_parse, .enable = l2c310_enable, .save = l2c310_save, .configure = l2c310_configure, .unlock = l2c310_unlock, .outer_cache = { .inv_range = bcm_inv_range, .clean_range = bcm_clean_range, .flush_range = bcm_flush_range, .flush_all = l2c210_flush_all, .disable = l2c310_disable, .sync = l2c210_sync, .resume = l2c310_resume, }, }; static void __init tauros3_save(void __iomem *base) { l2c_save(base); l2x0_saved_regs.aux2_ctrl = readl_relaxed(base + TAUROS3_AUX2_CTRL); l2x0_saved_regs.prefetch_ctrl = readl_relaxed(base + L310_PREFETCH_CTRL); } static void tauros3_configure(void __iomem *base) { l2c_configure(base); writel_relaxed(l2x0_saved_regs.aux2_ctrl, base + TAUROS3_AUX2_CTRL); writel_relaxed(l2x0_saved_regs.prefetch_ctrl, base + L310_PREFETCH_CTRL); } static const struct l2c_init_data of_tauros3_data __initconst = { .type = "Tauros3", .way_size_0 = SZ_8K, .num_lock = 8, .enable = l2c_enable, .save = tauros3_save, .configure = tauros3_configure, .unlock = l2c_unlock, /* Tauros3 broadcasts L1 cache operations to L2 */ .outer_cache = { .resume = l2c_resume, }, }; #define L2C_ID(name, fns) { .compatible = name, .data = (void *)&fns } static const struct of_device_id l2x0_ids[] __initconst = { L2C_ID("arm,l210-cache", of_l2c210_data), L2C_ID("arm,l220-cache", of_l2c220_data), L2C_ID("arm,pl310-cache", of_l2c310_data), L2C_ID("brcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data), L2C_ID("marvell,aurora-outer-cache", of_aurora_with_outer_data), L2C_ID("marvell,aurora-system-cache", of_aurora_no_outer_data), L2C_ID("marvell,tauros3-cache", of_tauros3_data), /* Deprecated IDs */ L2C_ID("bcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data), {} }; int __init l2x0_of_init(u32 aux_val, u32 aux_mask) { const struct l2c_init_data *data; struct device_node *np; struct resource res; u32 cache_id, old_aux; u32 cache_level = 2; bool nosync = false; np = of_find_matching_node(NULL, l2x0_ids); if (!np) return -ENODEV; if (of_address_to_resource(np, 0, &res)) return -ENODEV; l2x0_base = ioremap(res.start, resource_size(&res)); if (!l2x0_base) return -ENOMEM; l2x0_saved_regs.phy_base = res.start; data = of_match_node(l2x0_ids, np)->data; if (of_device_is_compatible(np, "arm,pl310-cache") && of_property_read_bool(np, "arm,io-coherent")) data = &of_l2c310_coherent_data; old_aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); if (old_aux != ((old_aux & aux_mask) | aux_val)) { pr_warn("L2C: platform modifies aux control register: 0x%08x -> 0x%08x\n", old_aux, (old_aux & aux_mask) | aux_val); } else if (aux_mask != ~0U && aux_val != 0) { pr_alert("L2C: platform provided aux values match the hardware, so have no effect. Please remove them.\n"); } /* All L2 caches are unified, so this property should be specified */ if (!of_property_read_bool(np, "cache-unified")) pr_err("L2C: device tree omits to specify unified cache\n"); if (of_property_read_u32(np, "cache-level", &cache_level)) pr_err("L2C: device tree omits to specify cache-level\n"); if (cache_level != 2) pr_err("L2C: device tree specifies invalid cache level\n"); nosync = of_property_read_bool(np, "arm,outer-sync-disable"); /* Read back current (default) hardware configuration */ if (data->save) data->save(l2x0_base); /* L2 configuration can only be changed if the cache is disabled */ if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) if (data->of_parse) data->of_parse(np, &aux_val, &aux_mask); if (cache_id_part_number_from_dt) cache_id = cache_id_part_number_from_dt; else cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID); return __l2c_init(data, aux_val, aux_mask, cache_id, nosync); } #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1