// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Microsemi MIPS SoC support * * Copyright (c) 2017 Microsemi Corporation */ #include <asm/machine.h> #include <asm/prom.h> #define DEVCPU_GCB_CHIP_REGS_CHIP_ID 0x71070000 #define CHIP_ID_PART_ID GENMASK(27, 12) #define OCELOT_PART_ID (0x7514 << 12) #define UART_UART 0x70100000 static __init bool ocelot_detect(void) { u32 rev; int idx; /* Look for the TLB entry set up by redboot before trying to use it */ write_c0_entryhi(DEVCPU_GCB_CHIP_REGS_CHIP_ID); mtc0_tlbw_hazard(); tlb_probe(); tlb_probe_hazard(); idx = read_c0_index(); if (idx < 0) return 0; /* A TLB entry exists, lets assume its usable and check the CHIP ID */ rev = __raw_readl((void __iomem *)DEVCPU_GCB_CHIP_REGS_CHIP_ID); if ((rev & CHIP_ID_PART_ID) != OCELOT_PART_ID) return 0; /* Copy command line from bootloader early for Initrd detection */ if (fw_arg0 < 10 && (fw_arg1 & 0xFFF00000) == 0x80000000) { unsigned int prom_argc = fw_arg0; const char **prom_argv = (const char **)fw_arg1; if (prom_argc > 1 && strlen(prom_argv[1]) > 0) /* ignore all built-in args if any f/w args given */ strcpy(arcs_cmdline, prom_argv[1]); } return 1; } static void __init ocelot_earlyprintk_init(void) { void __iomem *uart_base; uart_base = ioremap_nocache(UART_UART, 0x20); setup_8250_early_printk_port((unsigned long)uart_base, 2, 50000); } static void __init ocelot_late_init(void) { ocelot_earlyprintk_init(); } static __init const void *ocelot_fixup_fdt(const void *fdt, const void *match_data) { /* This has to be done so late because ioremap needs to work */ late_time_init = ocelot_late_init; return fdt; } extern char __dtb_ocelot_pcb123_begin[]; MIPS_MACHINE(ocelot) = { .fdt = __dtb_ocelot_pcb123_begin, .fixup_fdt = ocelot_fixup_fdt, .detect = ocelot_detect, };