Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Magnus Damm | 891 | 99.44% | 2 | 33.33% |
Paul Mundt | 3 | 0.33% | 3 | 50.00% |
Kuninori Morimoto | 2 | 0.22% | 1 | 16.67% |
Total | 896 | 6 |
// SPDX-License-Identifier: GPL-2.0 /* * Support for SuperH MigoR Quarter VGA LCD Panel * * Copyright (C) 2008 Magnus Damm * * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd. * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>, */ #include <linux/delay.h> #include <linux/err.h> #include <linux/fb.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/gpio.h> #include <video/sh_mobile_lcdc.h> #include <cpu/sh7722.h> #include <mach/migor.h> /* LCD Module is a PH240320T according to board schematics. This module * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?) * Driver IC. This IC is connected to the SH7722 built-in LCDC using a * SYS-80 interface configured in 16 bit mode. * * Index 0: "Device Code Read" returns 0x1505. */ static void reset_lcd_module(void) { gpio_set_value(GPIO_PTH2, 0); mdelay(2); gpio_set_value(GPIO_PTH2, 1); mdelay(1); } /* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */ static unsigned long adjust_reg18(unsigned short data) { unsigned long tmp1, tmp2; tmp1 = (data<<1 | 0x00000001) & 0x000001FF; tmp2 = (data<<2 | 0x00000200) & 0x0003FE00; return tmp1 | tmp2; } static void write_reg(void *sys_ops_handle, struct sh_mobile_lcdc_sys_bus_ops *sys_ops, unsigned short reg, unsigned short data) { sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data)); } static void write_reg16(void *sys_ops_handle, struct sh_mobile_lcdc_sys_bus_ops *sys_ops, unsigned short reg, unsigned short data) { sys_ops->write_index(sys_ops_handle, adjust_reg18(reg)); sys_ops->write_data(sys_ops_handle, adjust_reg18(data)); } static unsigned long read_reg16(void *sys_ops_handle, struct sh_mobile_lcdc_sys_bus_ops *sys_ops, unsigned short reg) { unsigned long data; sys_ops->write_index(sys_ops_handle, adjust_reg18(reg)); data = sys_ops->read_data(sys_ops_handle); return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00); } static void migor_lcd_qvga_seq(void *sys_ops_handle, struct sh_mobile_lcdc_sys_bus_ops *sys_ops, unsigned short const *data, int no_data) { int i; for (i = 0; i < no_data; i += 2) write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]); } static const unsigned short sync_data[] = { 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, }; static const unsigned short magic0_data[] = { 0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001, 0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116, 0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8, }; static const unsigned short magic1_data[] = { 0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202, 0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303, 0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102, 0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300, 0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000, 0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000, 0x0015, 0x8000, }; static const unsigned short magic2_data[] = { 0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021, }; static const unsigned short magic3_data[] = { 0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061, }; int migor_lcd_qvga_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so) { unsigned long xres = 320; unsigned long yres = 240; int k; reset_lcd_module(); migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data)); if (read_reg16(sohandle, so, 0) != 0x1505) return -ENODEV; pr_info("Migo-R QVGA LCD Module detected.\n"); migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data)); write_reg16(sohandle, so, 0x00A4, 0x0001); mdelay(10); migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data)); mdelay(100); migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data)); write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1)); write_reg16(sohandle, so, 0x0051, 0x00ef); write_reg16(sohandle, so, 0x0052, 0x0000); write_reg16(sohandle, so, 0x0053, xres - 1); migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data)); mdelay(10); migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data)); mdelay(40); /* clear GRAM to avoid displaying garbage */ write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */ write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */ for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */ write_reg16(sohandle, so, 0x0022, 0x0000); write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */ write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */ write_reg16(sohandle, so, 0x0007, 0x0173); mdelay(40); /* enable display */ write_reg(sohandle, so, 0x00, 0x22); mdelay(100); return 0; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1