Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Paul Mundt | 1660 | 97.30% | 17 | 65.38% |
Thomas Schwinge | 24 | 1.41% | 1 | 3.85% |
Magnus Damm | 16 | 0.94% | 3 | 11.54% |
Kuninori Morimoto | 2 | 0.12% | 1 | 3.85% |
Masahiro Yamada | 1 | 0.06% | 1 | 3.85% |
Matt Fleming | 1 | 0.06% | 1 | 3.85% |
Masanari Iida | 1 | 0.06% | 1 | 3.85% |
Yong Zhang | 1 | 0.06% | 1 | 3.85% |
Total | 1706 | 26 |
// SPDX-License-Identifier: GPL-2.0 /* * Low-Level PCI Support for the SH7780 * * Copyright (C) 2005 - 2010 Paul Mundt */ #include <linux/types.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/pci.h> #include <linux/interrupt.h> #include <linux/timer.h> #include <linux/irq.h> #include <linux/errno.h> #include <linux/delay.h> #include <linux/log2.h> #include "pci-sh4.h" #include <asm/mmu.h> #include <linux/sizes.h> #if defined(CONFIG_CPU_BIG_ENDIAN) # define PCICR_ENDIANNESS SH4_PCICR_BSWP #else # define PCICR_ENDIANNESS 0 #endif static struct resource sh7785_pci_resources[] = { { .name = "PCI IO", .start = 0x1000, .end = SZ_4M - 1, .flags = IORESOURCE_IO, }, { .name = "PCI MEM 0", .start = 0xfd000000, .end = 0xfd000000 + SZ_16M - 1, .flags = IORESOURCE_MEM, }, { .name = "PCI MEM 1", .start = 0x10000000, .end = 0x10000000 + SZ_64M - 1, .flags = IORESOURCE_MEM, }, { /* * 32-bit only resources must be last. */ .name = "PCI MEM 2", .start = 0xc0000000, .end = 0xc0000000 + SZ_512M - 1, .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, }, }; static struct pci_channel sh7780_pci_controller = { .pci_ops = &sh4_pci_ops, .resources = sh7785_pci_resources, .nr_resources = ARRAY_SIZE(sh7785_pci_resources), .io_offset = 0, .mem_offset = 0, .io_map_base = 0xfe200000, .serr_irq = evt2irq(0xa00), .err_irq = evt2irq(0xaa0), }; struct pci_errors { unsigned int mask; const char *str; } pci_arbiter_errors[] = { { SH4_PCIAINT_MBKN, "master broken" }, { SH4_PCIAINT_TBTO, "target bus time out" }, { SH4_PCIAINT_MBTO, "master bus time out" }, { SH4_PCIAINT_TABT, "target abort" }, { SH4_PCIAINT_MABT, "master abort" }, { SH4_PCIAINT_RDPE, "read data parity error" }, { SH4_PCIAINT_WDPE, "write data parity error" }, }, pci_interrupt_errors[] = { { SH4_PCIINT_MLCK, "master lock error" }, { SH4_PCIINT_TABT, "target-target abort" }, { SH4_PCIINT_TRET, "target retry time out" }, { SH4_PCIINT_MFDE, "master function disable error" }, { SH4_PCIINT_PRTY, "address parity error" }, { SH4_PCIINT_SERR, "SERR" }, { SH4_PCIINT_TWDP, "data parity error for target write" }, { SH4_PCIINT_TRDP, "PERR detected for target read" }, { SH4_PCIINT_MTABT, "target abort for master" }, { SH4_PCIINT_MMABT, "master abort for master" }, { SH4_PCIINT_MWPD, "master write data parity error" }, { SH4_PCIINT_MRPD, "master read data parity error" }, }; static irqreturn_t sh7780_pci_err_irq(int irq, void *dev_id) { struct pci_channel *hose = dev_id; unsigned long addr; unsigned int status; unsigned int cmd; int i; addr = __raw_readl(hose->reg_base + SH4_PCIALR); /* * Handle status errors. */ status = __raw_readw(hose->reg_base + PCI_STATUS); if (status & (PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY | PCI_STATUS_SIG_TARGET_ABORT | PCI_STATUS_REC_TARGET_ABORT | PCI_STATUS_REC_MASTER_ABORT)) { cmd = pcibios_handle_status_errors(addr, status, hose); if (likely(cmd)) __raw_writew(cmd, hose->reg_base + PCI_STATUS); } /* * Handle arbiter errors. */ status = __raw_readl(hose->reg_base + SH4_PCIAINT); for (i = cmd = 0; i < ARRAY_SIZE(pci_arbiter_errors); i++) { if (status & pci_arbiter_errors[i].mask) { printk(KERN_DEBUG "PCI: %s, addr=%08lx\n", pci_arbiter_errors[i].str, addr); cmd |= pci_arbiter_errors[i].mask; } } __raw_writel(cmd, hose->reg_base + SH4_PCIAINT); /* * Handle the remaining PCI errors. */ status = __raw_readl(hose->reg_base + SH4_PCIINT); for (i = cmd = 0; i < ARRAY_SIZE(pci_interrupt_errors); i++) { if (status & pci_interrupt_errors[i].mask) { printk(KERN_DEBUG "PCI: %s, addr=%08lx\n", pci_interrupt_errors[i].str, addr); cmd |= pci_interrupt_errors[i].mask; } } __raw_writel(cmd, hose->reg_base + SH4_PCIINT); return IRQ_HANDLED; } static irqreturn_t sh7780_pci_serr_irq(int irq, void *dev_id) { struct pci_channel *hose = dev_id; printk(KERN_DEBUG "PCI: system error received: "); pcibios_report_status(PCI_STATUS_SIG_SYSTEM_ERROR, 1); printk("\n"); /* Deassert SERR */ __raw_writel(SH4_PCIINTM_SDIM, hose->reg_base + SH4_PCIINTM); /* Back off the IRQ for awhile */ disable_irq_nosync(irq); hose->serr_timer.expires = jiffies + HZ; add_timer(&hose->serr_timer); return IRQ_HANDLED; } static int __init sh7780_pci_setup_irqs(struct pci_channel *hose) { int ret; /* Clear out PCI arbiter IRQs */ __raw_writel(0, hose->reg_base + SH4_PCIAINT); /* Clear all error conditions */ __raw_writew(PCI_STATUS_DETECTED_PARITY | \ PCI_STATUS_SIG_SYSTEM_ERROR | \ PCI_STATUS_REC_MASTER_ABORT | \ PCI_STATUS_REC_TARGET_ABORT | \ PCI_STATUS_SIG_TARGET_ABORT | \ PCI_STATUS_PARITY, hose->reg_base + PCI_STATUS); ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, 0, "PCI SERR interrupt", hose); if (unlikely(ret)) { printk(KERN_ERR "PCI: Failed hooking SERR IRQ\n"); return ret; } /* * The PCI ERR IRQ needs to be IRQF_SHARED since all of the power * down IRQ vectors are routed through the ERR IRQ vector. We * only request_irq() once as there is only a single masking * source for multiple events. */ ret = request_irq(hose->err_irq, sh7780_pci_err_irq, IRQF_SHARED, "PCI ERR interrupt", hose); if (unlikely(ret)) { free_irq(hose->serr_irq, hose); return ret; } /* Unmask all of the arbiter IRQs. */ __raw_writel(SH4_PCIAINT_MBKN | SH4_PCIAINT_TBTO | SH4_PCIAINT_MBTO | \ SH4_PCIAINT_TABT | SH4_PCIAINT_MABT | SH4_PCIAINT_RDPE | \ SH4_PCIAINT_WDPE, hose->reg_base + SH4_PCIAINTM); /* Unmask all of the PCI IRQs */ __raw_writel(SH4_PCIINTM_TTADIM | SH4_PCIINTM_TMTOIM | \ SH4_PCIINTM_MDEIM | SH4_PCIINTM_APEDIM | \ SH4_PCIINTM_SDIM | SH4_PCIINTM_DPEITWM | \ SH4_PCIINTM_PEDITRM | SH4_PCIINTM_TADIMM | \ SH4_PCIINTM_MADIMM | SH4_PCIINTM_MWPDIM | \ SH4_PCIINTM_MRDPEIM, hose->reg_base + SH4_PCIINTM); return ret; } static inline void __init sh7780_pci_teardown_irqs(struct pci_channel *hose) { free_irq(hose->err_irq, hose); free_irq(hose->serr_irq, hose); } static void __init sh7780_pci66_init(struct pci_channel *hose) { unsigned int tmp; if (!pci_is_66mhz_capable(hose, 0, 0)) return; /* Enable register access */ tmp = __raw_readl(hose->reg_base + SH4_PCICR); tmp |= SH4_PCICR_PREFIX; __raw_writel(tmp, hose->reg_base + SH4_PCICR); /* Enable 66MHz operation */ tmp = __raw_readw(hose->reg_base + PCI_STATUS); tmp |= PCI_STATUS_66MHZ; __raw_writew(tmp, hose->reg_base + PCI_STATUS); /* Done */ tmp = __raw_readl(hose->reg_base + SH4_PCICR); tmp |= SH4_PCICR_PREFIX | SH4_PCICR_CFIN; __raw_writel(tmp, hose->reg_base + SH4_PCICR); } static int __init sh7780_pci_init(void) { struct pci_channel *chan = &sh7780_pci_controller; phys_addr_t memphys; size_t memsize; unsigned int id; const char *type; int ret, i; printk(KERN_NOTICE "PCI: Starting initialization.\n"); chan->reg_base = 0xfe040000; /* Enable CPU access to the PCIC registers. */ __raw_writel(PCIECR_ENBL, PCIECR); /* Reset */ __raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_PRST | PCICR_ENDIANNESS, chan->reg_base + SH4_PCICR); /* * Wait for it to come back up. The spec says to allow for up to * 1 second after toggling the reset pin, but in practice 100ms * is more than enough. */ mdelay(100); id = __raw_readw(chan->reg_base + PCI_VENDOR_ID); if (id != PCI_VENDOR_ID_RENESAS) { printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id); return -ENODEV; } id = __raw_readw(chan->reg_base + PCI_DEVICE_ID); type = (id == PCI_DEVICE_ID_RENESAS_SH7763) ? "SH7763" : (id == PCI_DEVICE_ID_RENESAS_SH7780) ? "SH7780" : (id == PCI_DEVICE_ID_RENESAS_SH7781) ? "SH7781" : (id == PCI_DEVICE_ID_RENESAS_SH7785) ? "SH7785" : NULL; if (unlikely(!type)) { printk(KERN_ERR "PCI: Found an unsupported Renesas host " "controller, device id 0x%04x.\n", id); return -EINVAL; } printk(KERN_NOTICE "PCI: Found a Renesas %s host " "controller, revision %d.\n", type, __raw_readb(chan->reg_base + PCI_REVISION_ID)); /* * Now throw it in to register initialization mode and * start the real work. */ __raw_writel(SH4_PCICR_PREFIX | PCICR_ENDIANNESS, chan->reg_base + SH4_PCICR); memphys = __pa(memory_start); memsize = roundup_pow_of_two(memory_end - memory_start); /* * If there's more than 512MB of memory, we need to roll over to * LAR1/LSR1. */ if (memsize > SZ_512M) { __raw_writel(memphys + SZ_512M, chan->reg_base + SH4_PCILAR1); __raw_writel((((memsize - SZ_512M) - SZ_1M) & 0x1ff00000) | 1, chan->reg_base + SH4_PCILSR1); memsize = SZ_512M; } else { /* * Otherwise just zero it out and disable it. */ __raw_writel(0, chan->reg_base + SH4_PCILAR1); __raw_writel(0, chan->reg_base + SH4_PCILSR1); } /* * LAR0/LSR0 covers up to the first 512MB, which is enough to * cover all of lowmem on most platforms. */ __raw_writel(memphys, chan->reg_base + SH4_PCILAR0); __raw_writel(((memsize - SZ_1M) & 0x1ff00000) | 1, chan->reg_base + SH4_PCILSR0); /* * Hook up the ERR and SERR IRQs. */ ret = sh7780_pci_setup_irqs(chan); if (unlikely(ret)) return ret; /* * Disable the cache snoop controller for non-coherent DMA. */ __raw_writel(0, chan->reg_base + SH7780_PCICSCR0); __raw_writel(0, chan->reg_base + SH7780_PCICSAR0); __raw_writel(0, chan->reg_base + SH7780_PCICSCR1); __raw_writel(0, chan->reg_base + SH7780_PCICSAR1); /* * Setup the memory BARs */ for (i = 1; i < chan->nr_resources; i++) { struct resource *res = chan->resources + i; resource_size_t size; if (unlikely(res->flags & IORESOURCE_IO)) continue; /* * Make sure we're in the right physical addressing mode * for dealing with the resource. */ if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode()) { chan->nr_resources--; continue; } size = resource_size(res); /* * The MBMR mask is calculated in units of 256kB, which * keeps things pretty simple. */ __raw_writel(((roundup_pow_of_two(size) / SZ_256K) - 1) << 18, chan->reg_base + SH7780_PCIMBMR(i - 1)); __raw_writel(res->start, chan->reg_base + SH7780_PCIMBR(i - 1)); } /* * And I/O. */ __raw_writel(0, chan->reg_base + PCI_BASE_ADDRESS_0); __raw_writel(0, chan->reg_base + SH7780_PCIIOBR); __raw_writel(0, chan->reg_base + SH7780_PCIIOBMR); __raw_writew(PCI_COMMAND_SERR | PCI_COMMAND_WAIT | \ PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | \ PCI_COMMAND_MEMORY, chan->reg_base + PCI_COMMAND); /* * Initialization mode complete, release the control register and * enable round robin mode to stop device overruns/starvation. */ __raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO | PCICR_ENDIANNESS, chan->reg_base + SH4_PCICR); ret = register_pci_controller(chan); if (unlikely(ret)) goto err; sh7780_pci66_init(chan); printk(KERN_NOTICE "PCI: Running at %dMHz.\n", (__raw_readw(chan->reg_base + PCI_STATUS) & PCI_STATUS_66MHZ) ? 66 : 33); return 0; err: sh7780_pci_teardown_irqs(chan); return ret; } arch_initcall(sh7780_pci_init);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1