Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Nobuhiro Iwamatsu | 328 | 97.62% | 1 | 33.33% |
Paul Mundt | 6 | 1.79% | 1 | 33.33% |
Kuninori Morimoto | 2 | 0.60% | 1 | 33.33% |
Total | 336 | 3 |
/* SPDX-License-Identifier: GPL-2.0 */ #ifndef __ASM_SH_SE7780_H #define __ASM_SH_SE7780_H /* * linux/include/asm-sh/se7780.h * * Copyright (C) 2006,2007 Nobuhiro Iwamatsu * * Hitachi UL SolutionEngine 7780 Support. */ #include <linux/sh_intc.h> #include <asm/addrspace.h> /* Box specific addresses. */ #define SE_AREA0_WIDTH 4 /* Area0: 32bit */ #define PA_ROM 0xa0000000 /* EPROM */ #define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ #define PA_FROM 0xa1000000 /* Flash-ROM */ #define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ #define PA_EXT1 0xa4000000 #define PA_EXT1_SIZE 0x04000000 #define PA_SM501 PA_EXT1 /* Graphic IC (SM501) */ #define PA_SM501_SIZE PA_EXT1_SIZE /* Graphic IC (SM501) */ #define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */ #define PA_SDRAM_SIZE 0x08000000 #define PA_EXT4 0xb0000000 #define PA_EXT4_SIZE 0x04000000 #define PA_EXT_FLASH PA_EXT4 /* Expansion Flash-ROM */ #define PA_PERIPHERAL PA_AREA6_IO /* SW6-6=ON */ #define PA_LAN (PA_PERIPHERAL + 0) /* SMC LAN91C111 */ #define PA_LED_DISP (PA_PERIPHERAL + 0x02000000) /* 8words LED Display */ #define DISP_CHAR_RAM (7 << 3) #define DISP_SEL0_ADDR (DISP_CHAR_RAM + 0) #define DISP_SEL1_ADDR (DISP_CHAR_RAM + 1) #define DISP_SEL2_ADDR (DISP_CHAR_RAM + 2) #define DISP_SEL3_ADDR (DISP_CHAR_RAM + 3) #define DISP_SEL4_ADDR (DISP_CHAR_RAM + 4) #define DISP_SEL5_ADDR (DISP_CHAR_RAM + 5) #define DISP_SEL6_ADDR (DISP_CHAR_RAM + 6) #define DISP_SEL7_ADDR (DISP_CHAR_RAM + 7) #define DISP_UDC_RAM (5 << 3) #define PA_FPGA (PA_PERIPHERAL + 0x03000000) /* FPGA base address */ /* FPGA register address and bit */ #define FPGA_SFTRST (PA_FPGA + 0) /* Soft reset register */ #define FPGA_INTMSK1 (PA_FPGA + 2) /* Interrupt Mask register 1 */ #define FPGA_INTMSK2 (PA_FPGA + 4) /* Interrupt Mask register 2 */ #define FPGA_INTSEL1 (PA_FPGA + 6) /* Interrupt select register 1 */ #define FPGA_INTSEL2 (PA_FPGA + 8) /* Interrupt select register 2 */ #define FPGA_INTSEL3 (PA_FPGA + 10) /* Interrupt select register 3 */ #define FPGA_PCI_INTSEL1 (PA_FPGA + 12) /* PCI Interrupt select register 1 */ #define FPGA_PCI_INTSEL2 (PA_FPGA + 14) /* PCI Interrupt select register 2 */ #define FPGA_INTSET (PA_FPGA + 16) /* IRQ/IRL select register */ #define FPGA_INTSTS1 (PA_FPGA + 18) /* Interrupt status register 1 */ #define FPGA_INTSTS2 (PA_FPGA + 20) /* Interrupt status register 2 */ #define FPGA_REQSEL (PA_FPGA + 22) /* REQ/GNT select register */ #define FPGA_DBG_LED (PA_FPGA + 32) /* Debug LED(D-LED[8:1] */ #define PA_LED FPGA_DBG_LED #define FPGA_IVDRID (PA_FPGA + 36) /* iVDR ID Register */ #define FPGA_IVDRPW (PA_FPGA + 38) /* iVDR Power ON Register */ #define FPGA_MMCID (PA_FPGA + 40) /* MMC ID Register */ /* FPGA INTSEL position */ /* INTSEL1 */ #define IRQPOS_SMC91CX (0 * 4) #define IRQPOS_SM501 (1 * 4) /* INTSEL2 */ #define IRQPOS_EXTINT1 (0 * 4) #define IRQPOS_EXTINT2 (1 * 4) #define IRQPOS_EXTINT3 (2 * 4) #define IRQPOS_EXTINT4 (3 * 4) /* INTSEL3 */ #define IRQPOS_PCCPW (0 * 4) /* IDE interrupt */ #define IRQ_IDE0 evt2irq(0xa60) /* iVDR */ /* SMC interrupt */ #define SMC_IRQ evt2irq(0x300) /* SM501 interrupt */ #define SM501_IRQ evt2irq(0x200) /* interrupt pin */ #define IRQPIN_EXTINT1 0 /* IRQ0 pin */ #define IRQPIN_EXTINT2 1 /* IRQ1 pin */ #define IRQPIN_EXTINT3 2 /* IRQ2 pin */ #define IRQPIN_SMC91CX 3 /* IRQ3 pin */ #define IRQPIN_EXTINT4 4 /* IRQ4 pin */ #define IRQPIN_PCC0 5 /* IRQ5 pin */ #define IRQPIN_PCC2 6 /* IRQ6 pin */ #define IRQPIN_SM501 7 /* IRQ7 pin */ #define IRQPIN_PCCPW 7 /* IRQ7 pin */ /* arch/sh/boards/se/7780/irq.c */ void init_se7780_IRQ(void); #define __IO_PREFIX se7780 #include <asm/io_generic.h> #endif /* __ASM_SH_SE7780_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1