Contributors: 27
Author Tokens Token Proportion Commits Commit Proportion
Linus Torvalds (pre-git) 2070 52.50% 23 31.94%
Linus Torvalds 716 18.16% 8 11.11%
Bamvor Jian Zhang 311 7.89% 2 2.78%
Sudip Mukherjee 274 6.95% 5 6.94%
Tim Waugh 173 4.39% 3 4.17%
Marcel Sebek 157 3.98% 1 1.39%
Al Viro 50 1.27% 4 5.56%
Alan Cox 42 1.07% 1 1.39%
Colin Ian King 25 0.63% 1 1.39%
Michael Buesch 25 0.63% 1 1.39%
Arnd Bergmann 17 0.43% 1 1.39%
Art Haas 16 0.41% 1 1.39%
Greg Kroah-Hartman 13 0.33% 6 8.33%
Dave Jones 10 0.25% 1 1.39%
Julia Lawall 10 0.25% 2 2.78%
Alexey Khoroshilov 8 0.20% 1 1.39%
Andrew Morton 5 0.13% 1 1.39%
Tejun Heo 3 0.08% 1 1.39%
Vasiliy Kulikov 3 0.08% 1 1.39%
René Herman 3 0.08% 1 1.39%
David Brownell 3 0.08% 1 1.39%
Thomas Gleixner 2 0.05% 1 1.39%
Jonathan Corbet 2 0.05% 1 1.39%
Jeff Garzik 2 0.05% 1 1.39%
Steven Cole 1 0.03% 1 1.39%
Arjan van de Ven 1 0.03% 1 1.39%
Ingo Molnar 1 0.03% 1 1.39%
Total 3943 72


// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * linux/drivers/char/ppdev.c
 *
 * This is the code behind /dev/parport* -- it allows a user-space
 * application to use the parport subsystem.
 *
 * Copyright (C) 1998-2000, 2002 Tim Waugh <tim@cyberelk.net>
 *
 * A /dev/parportx device node represents an arbitrary device
 * on port 'x'.  The following operations are possible:
 *
 * open		do nothing, set up default IEEE 1284 protocol to be COMPAT
 * close	release port and unregister device (if necessary)
 * ioctl
 *   EXCL	register device exclusively (may fail)
 *   CLAIM	(register device first time) parport_claim_or_block
 *   RELEASE	parport_release
 *   SETMODE	set the IEEE 1284 protocol to use for read/write
 *   SETPHASE	set the IEEE 1284 phase of a particular mode.  Not to be
 *              confused with ioctl(fd, SETPHASER, &stun). ;-)
 *   DATADIR	data_forward / data_reverse
 *   WDATA	write_data
 *   RDATA	read_data
 *   WCONTROL	write_control
 *   RCONTROL	read_control
 *   FCONTROL	frob_control
 *   RSTATUS	read_status
 *   NEGOT	parport_negotiate
 *   YIELD	parport_yield_blocking
 *   WCTLONIRQ	on interrupt, set control lines
 *   CLRIRQ	clear (and return) interrupt count
 *   SETTIME	sets device timeout (struct timeval)
 *   GETTIME	gets device timeout (struct timeval)
 *   GETMODES	gets hardware supported modes (unsigned int)
 *   GETMODE	gets the current IEEE1284 mode
 *   GETPHASE   gets the current IEEE1284 phase
 *   GETFLAGS   gets current (user-visible) flags
 *   SETFLAGS   sets current (user-visible) flags
 * read/write	read or write in current IEEE 1284 protocol
 * select	wait for interrupt (in readfds)
 *
 * Changes:
 * Added SETTIME/GETTIME ioctl, Fred Barnes, 1999.
 *
 * Arnaldo Carvalho de Melo <acme@conectiva.com.br> 2000/08/25
 * - On error, copy_from_user and copy_to_user do not return -EFAULT,
 *   They return the positive number of bytes *not* copied due to address
 *   space errors.
 *
 * Added GETMODES/GETMODE/GETPHASE ioctls, Fred Barnes <frmb2@ukc.ac.uk>, 03/01/2001.
 * Added GETFLAGS/SETFLAGS ioctls, Fred Barnes, 04/2001
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched/signal.h>
#include <linux/device.h>
#include <linux/ioctl.h>
#include <linux/parport.h>
#include <linux/ctype.h>
#include <linux/poll.h>
#include <linux/slab.h>
#include <linux/major.h>
#include <linux/ppdev.h>
#include <linux/mutex.h>
#include <linux/uaccess.h>
#include <linux/compat.h>

#define PP_VERSION "ppdev: user-space parallel port driver"
#define CHRDEV "ppdev"

struct pp_struct {
	struct pardevice *pdev;
	wait_queue_head_t irq_wait;
	atomic_t irqc;
	unsigned int flags;
	int irqresponse;
	unsigned char irqctl;
	struct ieee1284_info state;
	struct ieee1284_info saved_state;
	long default_inactivity;
	int index;
};

/* should we use PARDEVICE_MAX here? */
static struct device *devices[PARPORT_MAX];

static DEFINE_IDA(ida_index);

/* pp_struct.flags bitfields */
#define PP_CLAIMED    (1<<0)
#define PP_EXCL       (1<<1)

/* Other constants */
#define PP_INTERRUPT_TIMEOUT (10 * HZ) /* 10s */
#define PP_BUFFER_SIZE 1024
#define PARDEVICE_MAX 8

static DEFINE_MUTEX(pp_do_mutex);

/* define fixed sized ioctl cmd for y2038 migration */
#define PPGETTIME32	_IOR(PP_IOCTL, 0x95, s32[2])
#define PPSETTIME32	_IOW(PP_IOCTL, 0x96, s32[2])
#define PPGETTIME64	_IOR(PP_IOCTL, 0x95, s64[2])
#define PPSETTIME64	_IOW(PP_IOCTL, 0x96, s64[2])

static inline void pp_enable_irq(struct pp_struct *pp)
{
	struct parport *port = pp->pdev->port;

	port->ops->enable_irq(port);
}

static ssize_t pp_read(struct file *file, char __user *buf, size_t count,
		       loff_t *ppos)
{
	unsigned int minor = iminor(file_inode(file));
	struct pp_struct *pp = file->private_data;
	char *kbuffer;
	ssize_t bytes_read = 0;
	struct parport *pport;
	int mode;

	if (!(pp->flags & PP_CLAIMED)) {
		/* Don't have the port claimed */
		pr_debug(CHRDEV "%x: claim the port first\n", minor);
		return -EINVAL;
	}

	/* Trivial case. */
	if (count == 0)
		return 0;

	kbuffer = kmalloc(min_t(size_t, count, PP_BUFFER_SIZE), GFP_KERNEL);
	if (!kbuffer)
		return -ENOMEM;
	pport = pp->pdev->port;
	mode = pport->ieee1284.mode & ~(IEEE1284_DEVICEID | IEEE1284_ADDR);

	parport_set_timeout(pp->pdev,
			    (file->f_flags & O_NONBLOCK) ?
			    PARPORT_INACTIVITY_O_NONBLOCK :
			    pp->default_inactivity);

	while (bytes_read == 0) {
		ssize_t need = min_t(unsigned long, count, PP_BUFFER_SIZE);

		if (mode == IEEE1284_MODE_EPP) {
			/* various specials for EPP mode */
			int flags = 0;
			size_t (*fn)(struct parport *, void *, size_t, int);

			if (pp->flags & PP_W91284PIC)
				flags |= PARPORT_W91284PIC;
			if (pp->flags & PP_FASTREAD)
				flags |= PARPORT_EPP_FAST;
			if (pport->ieee1284.mode & IEEE1284_ADDR)
				fn = pport->ops->epp_read_addr;
			else
				fn = pport->ops->epp_read_data;
			bytes_read = (*fn)(pport, kbuffer, need, flags);
		} else {
			bytes_read = parport_read(pport, kbuffer, need);
		}

		if (bytes_read != 0)
			break;

		if (file->f_flags & O_NONBLOCK) {
			bytes_read = -EAGAIN;
			break;
		}

		if (signal_pending(current)) {
			bytes_read = -ERESTARTSYS;
			break;
		}

		cond_resched();
	}

	parport_set_timeout(pp->pdev, pp->default_inactivity);

	if (bytes_read > 0 && copy_to_user(buf, kbuffer, bytes_read))
		bytes_read = -EFAULT;

	kfree(kbuffer);
	pp_enable_irq(pp);
	return bytes_read;
}

static ssize_t pp_write(struct file *file, const char __user *buf,
			size_t count, loff_t *ppos)
{
	unsigned int minor = iminor(file_inode(file));
	struct pp_struct *pp = file->private_data;
	char *kbuffer;
	ssize_t bytes_written = 0;
	ssize_t wrote;
	int mode;
	struct parport *pport;

	if (!(pp->flags & PP_CLAIMED)) {
		/* Don't have the port claimed */
		pr_debug(CHRDEV "%x: claim the port first\n", minor);
		return -EINVAL;
	}

	kbuffer = kmalloc(min_t(size_t, count, PP_BUFFER_SIZE), GFP_KERNEL);
	if (!kbuffer)
		return -ENOMEM;

	pport = pp->pdev->port;
	mode = pport->ieee1284.mode & ~(IEEE1284_DEVICEID | IEEE1284_ADDR);

	parport_set_timeout(pp->pdev,
			    (file->f_flags & O_NONBLOCK) ?
			    PARPORT_INACTIVITY_O_NONBLOCK :
			    pp->default_inactivity);

	while (bytes_written < count) {
		ssize_t n = min_t(unsigned long, count - bytes_written, PP_BUFFER_SIZE);

		if (copy_from_user(kbuffer, buf + bytes_written, n)) {
			bytes_written = -EFAULT;
			break;
		}

		if ((pp->flags & PP_FASTWRITE) && (mode == IEEE1284_MODE_EPP)) {
			/* do a fast EPP write */
			if (pport->ieee1284.mode & IEEE1284_ADDR) {
				wrote = pport->ops->epp_write_addr(pport,
					kbuffer, n, PARPORT_EPP_FAST);
			} else {
				wrote = pport->ops->epp_write_data(pport,
					kbuffer, n, PARPORT_EPP_FAST);
			}
		} else {
			wrote = parport_write(pp->pdev->port, kbuffer, n);
		}

		if (wrote <= 0) {
			if (!bytes_written)
				bytes_written = wrote;
			break;
		}

		bytes_written += wrote;

		if (file->f_flags & O_NONBLOCK) {
			if (!bytes_written)
				bytes_written = -EAGAIN;
			break;
		}

		if (signal_pending(current))
			break;

		cond_resched();
	}

	parport_set_timeout(pp->pdev, pp->default_inactivity);

	kfree(kbuffer);
	pp_enable_irq(pp);
	return bytes_written;
}

static void pp_irq(void *private)
{
	struct pp_struct *pp = private;

	if (pp->irqresponse) {
		parport_write_control(pp->pdev->port, pp->irqctl);
		pp->irqresponse = 0;
	}

	atomic_inc(&pp->irqc);
	wake_up_interruptible(&pp->irq_wait);
}

static int register_device(int minor, struct pp_struct *pp)
{
	struct parport *port;
	struct pardevice *pdev = NULL;
	char *name;
	struct pardev_cb ppdev_cb;
	int rc = 0, index;

	name = kasprintf(GFP_KERNEL, CHRDEV "%x", minor);
	if (name == NULL)
		return -ENOMEM;

	port = parport_find_number(minor);
	if (!port) {
		pr_warn("%s: no associated port!\n", name);
		rc = -ENXIO;
		goto err;
	}

	index = ida_simple_get(&ida_index, 0, 0, GFP_KERNEL);
	memset(&ppdev_cb, 0, sizeof(ppdev_cb));
	ppdev_cb.irq_func = pp_irq;
	ppdev_cb.flags = (pp->flags & PP_EXCL) ? PARPORT_FLAG_EXCL : 0;
	ppdev_cb.private = pp;
	pdev = parport_register_dev_model(port, name, &ppdev_cb, index);
	parport_put_port(port);

	if (!pdev) {
		pr_warn("%s: failed to register device!\n", name);
		rc = -ENXIO;
		ida_simple_remove(&ida_index, index);
		goto err;
	}

	pp->pdev = pdev;
	pp->index = index;
	dev_dbg(&pdev->dev, "registered pardevice\n");
err:
	kfree(name);
	return rc;
}

static enum ieee1284_phase init_phase(int mode)
{
	switch (mode & ~(IEEE1284_DEVICEID
			 | IEEE1284_ADDR)) {
	case IEEE1284_MODE_NIBBLE:
	case IEEE1284_MODE_BYTE:
		return IEEE1284_PH_REV_IDLE;
	}
	return IEEE1284_PH_FWD_IDLE;
}

static int pp_set_timeout(struct pardevice *pdev, long tv_sec, int tv_usec)
{
	long to_jiffies;

	if ((tv_sec < 0) || (tv_usec < 0))
		return -EINVAL;

	to_jiffies = usecs_to_jiffies(tv_usec);
	to_jiffies += tv_sec * HZ;
	if (to_jiffies <= 0)
		return -EINVAL;

	pdev->timeout = to_jiffies;
	return 0;
}

static int pp_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
	unsigned int minor = iminor(file_inode(file));
	struct pp_struct *pp = file->private_data;
	struct parport *port;
	void __user *argp = (void __user *)arg;

	/* First handle the cases that don't take arguments. */
	switch (cmd) {
	case PPCLAIM:
	    {
		struct ieee1284_info *info;
		int ret;

		if (pp->flags & PP_CLAIMED) {
			dev_dbg(&pp->pdev->dev, "you've already got it!\n");
			return -EINVAL;
		}

		/* Deferred device registration. */
		if (!pp->pdev) {
			int err = register_device(minor, pp);

			if (err)
				return err;
		}

		ret = parport_claim_or_block(pp->pdev);
		if (ret < 0)
			return ret;

		pp->flags |= PP_CLAIMED;

		/* For interrupt-reporting to work, we need to be
		 * informed of each interrupt. */
		pp_enable_irq(pp);

		/* We may need to fix up the state machine. */
		info = &pp->pdev->port->ieee1284;
		pp->saved_state.mode = info->mode;
		pp->saved_state.phase = info->phase;
		info->mode = pp->state.mode;
		info->phase = pp->state.phase;
		pp->default_inactivity = parport_set_timeout(pp->pdev, 0);
		parport_set_timeout(pp->pdev, pp->default_inactivity);

		return 0;
	    }
	case PPEXCL:
		if (pp->pdev) {
			dev_dbg(&pp->pdev->dev,
				"too late for PPEXCL; already registered\n");
			if (pp->flags & PP_EXCL)
				/* But it's not really an error. */
				return 0;
			/* There's no chance of making the driver happy. */
			return -EINVAL;
		}

		/* Just remember to register the device exclusively
		 * when we finally do the registration. */
		pp->flags |= PP_EXCL;
		return 0;
	case PPSETMODE:
	    {
		int mode;

		if (copy_from_user(&mode, argp, sizeof(mode)))
			return -EFAULT;
		/* FIXME: validate mode */
		pp->state.mode = mode;
		pp->state.phase = init_phase(mode);

		if (pp->flags & PP_CLAIMED) {
			pp->pdev->port->ieee1284.mode = mode;
			pp->pdev->port->ieee1284.phase = pp->state.phase;
		}

		return 0;
	    }
	case PPGETMODE:
	    {
		int mode;

		if (pp->flags & PP_CLAIMED)
			mode = pp->pdev->port->ieee1284.mode;
		else
			mode = pp->state.mode;

		if (copy_to_user(argp, &mode, sizeof(mode)))
			return -EFAULT;
		return 0;
	    }
	case PPSETPHASE:
	    {
		int phase;

		if (copy_from_user(&phase, argp, sizeof(phase)))
			return -EFAULT;

		/* FIXME: validate phase */
		pp->state.phase = phase;

		if (pp->flags & PP_CLAIMED)
			pp->pdev->port->ieee1284.phase = phase;

		return 0;
	    }
	case PPGETPHASE:
	    {
		int phase;

		if (pp->flags & PP_CLAIMED)
			phase = pp->pdev->port->ieee1284.phase;
		else
			phase = pp->state.phase;
		if (copy_to_user(argp, &phase, sizeof(phase)))
			return -EFAULT;
		return 0;
	    }
	case PPGETMODES:
	    {
		unsigned int modes;

		port = parport_find_number(minor);
		if (!port)
			return -ENODEV;

		modes = port->modes;
		parport_put_port(port);
		if (copy_to_user(argp, &modes, sizeof(modes)))
			return -EFAULT;
		return 0;
	    }
	case PPSETFLAGS:
	    {
		int uflags;

		if (copy_from_user(&uflags, argp, sizeof(uflags)))
			return -EFAULT;
		pp->flags &= ~PP_FLAGMASK;
		pp->flags |= (uflags & PP_FLAGMASK);
		return 0;
	    }
	case PPGETFLAGS:
	    {
		int uflags;

		uflags = pp->flags & PP_FLAGMASK;
		if (copy_to_user(argp, &uflags, sizeof(uflags)))
			return -EFAULT;
		return 0;
	    }
	}	/* end switch() */

	/* Everything else requires the port to be claimed, so check
	 * that now. */
	if ((pp->flags & PP_CLAIMED) == 0) {
		pr_debug(CHRDEV "%x: claim the port first\n", minor);
		return -EINVAL;
	}

	port = pp->pdev->port;
	switch (cmd) {
		struct ieee1284_info *info;
		unsigned char reg;
		unsigned char mask;
		int mode;
		s32 time32[2];
		s64 time64[2];
		struct timespec64 ts;
		int ret;

	case PPRSTATUS:
		reg = parport_read_status(port);
		if (copy_to_user(argp, &reg, sizeof(reg)))
			return -EFAULT;
		return 0;
	case PPRDATA:
		reg = parport_read_data(port);
		if (copy_to_user(argp, &reg, sizeof(reg)))
			return -EFAULT;
		return 0;
	case PPRCONTROL:
		reg = parport_read_control(port);
		if (copy_to_user(argp, &reg, sizeof(reg)))
			return -EFAULT;
		return 0;
	case PPYIELD:
		parport_yield_blocking(pp->pdev);
		return 0;

	case PPRELEASE:
		/* Save the state machine's state. */
		info = &pp->pdev->port->ieee1284;
		pp->state.mode = info->mode;
		pp->state.phase = info->phase;
		info->mode = pp->saved_state.mode;
		info->phase = pp->saved_state.phase;
		parport_release(pp->pdev);
		pp->flags &= ~PP_CLAIMED;
		return 0;

	case PPWCONTROL:
		if (copy_from_user(&reg, argp, sizeof(reg)))
			return -EFAULT;
		parport_write_control(port, reg);
		return 0;

	case PPWDATA:
		if (copy_from_user(&reg, argp, sizeof(reg)))
			return -EFAULT;
		parport_write_data(port, reg);
		return 0;

	case PPFCONTROL:
		if (copy_from_user(&mask, argp,
				   sizeof(mask)))
			return -EFAULT;
		if (copy_from_user(&reg, 1 + (unsigned char __user *) arg,
				   sizeof(reg)))
			return -EFAULT;
		parport_frob_control(port, mask, reg);
		return 0;

	case PPDATADIR:
		if (copy_from_user(&mode, argp, sizeof(mode)))
			return -EFAULT;
		if (mode)
			port->ops->data_reverse(port);
		else
			port->ops->data_forward(port);
		return 0;

	case PPNEGOT:
		if (copy_from_user(&mode, argp, sizeof(mode)))
			return -EFAULT;
		switch ((ret = parport_negotiate(port, mode))) {
		case 0: break;
		case -1: /* handshake failed, peripheral not IEEE 1284 */
			ret = -EIO;
			break;
		case 1:  /* handshake succeeded, peripheral rejected mode */
			ret = -ENXIO;
			break;
		}
		pp_enable_irq(pp);
		return ret;

	case PPWCTLONIRQ:
		if (copy_from_user(&reg, argp, sizeof(reg)))
			return -EFAULT;

		/* Remember what to set the control lines to, for next
		 * time we get an interrupt. */
		pp->irqctl = reg;
		pp->irqresponse = 1;
		return 0;

	case PPCLRIRQ:
		ret = atomic_read(&pp->irqc);
		if (copy_to_user(argp, &ret, sizeof(ret)))
			return -EFAULT;
		atomic_sub(ret, &pp->irqc);
		return 0;

	case PPSETTIME32:
		if (copy_from_user(time32, argp, sizeof(time32)))
			return -EFAULT;

		return pp_set_timeout(pp->pdev, time32[0], time32[1]);

	case PPSETTIME64:
		if (copy_from_user(time64, argp, sizeof(time64)))
			return -EFAULT;

		return pp_set_timeout(pp->pdev, time64[0], time64[1]);

	case PPGETTIME32:
		jiffies_to_timespec64(pp->pdev->timeout, &ts);
		time32[0] = ts.tv_sec;
		time32[1] = ts.tv_nsec / NSEC_PER_USEC;
		if ((time32[0] < 0) || (time32[1] < 0))
			return -EINVAL;

		if (copy_to_user(argp, time32, sizeof(time32)))
			return -EFAULT;

		return 0;

	case PPGETTIME64:
		jiffies_to_timespec64(pp->pdev->timeout, &ts);
		time64[0] = ts.tv_sec;
		time64[1] = ts.tv_nsec / NSEC_PER_USEC;
		if ((time64[0] < 0) || (time64[1] < 0))
			return -EINVAL;

		if (copy_to_user(argp, time64, sizeof(time64)))
			return -EFAULT;

		return 0;

	default:
		dev_dbg(&pp->pdev->dev, "What? (cmd=0x%x)\n", cmd);
		return -EINVAL;
	}

	/* Keep the compiler happy */
	return 0;
}

static long pp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
	long ret;

	mutex_lock(&pp_do_mutex);
	ret = pp_do_ioctl(file, cmd, arg);
	mutex_unlock(&pp_do_mutex);
	return ret;
}

#ifdef CONFIG_COMPAT
static long pp_compat_ioctl(struct file *file, unsigned int cmd,
			    unsigned long arg)
{
	return pp_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
}
#endif

static int pp_open(struct inode *inode, struct file *file)
{
	unsigned int minor = iminor(inode);
	struct pp_struct *pp;

	if (minor >= PARPORT_MAX)
		return -ENXIO;

	pp = kmalloc(sizeof(struct pp_struct), GFP_KERNEL);
	if (!pp)
		return -ENOMEM;

	pp->state.mode = IEEE1284_MODE_COMPAT;
	pp->state.phase = init_phase(pp->state.mode);
	pp->flags = 0;
	pp->irqresponse = 0;
	atomic_set(&pp->irqc, 0);
	init_waitqueue_head(&pp->irq_wait);

	/* Defer the actual device registration until the first claim.
	 * That way, we know whether or not the driver wants to have
	 * exclusive access to the port (PPEXCL).
	 */
	pp->pdev = NULL;
	file->private_data = pp;

	return 0;
}

static int pp_release(struct inode *inode, struct file *file)
{
	unsigned int minor = iminor(inode);
	struct pp_struct *pp = file->private_data;
	int compat_negot;

	compat_negot = 0;
	if (!(pp->flags & PP_CLAIMED) && pp->pdev &&
	    (pp->state.mode != IEEE1284_MODE_COMPAT)) {
		struct ieee1284_info *info;

		/* parport released, but not in compatibility mode */
		parport_claim_or_block(pp->pdev);
		pp->flags |= PP_CLAIMED;
		info = &pp->pdev->port->ieee1284;
		pp->saved_state.mode = info->mode;
		pp->saved_state.phase = info->phase;
		info->mode = pp->state.mode;
		info->phase = pp->state.phase;
		compat_negot = 1;
	} else if ((pp->flags & PP_CLAIMED) && pp->pdev &&
	    (pp->pdev->port->ieee1284.mode != IEEE1284_MODE_COMPAT)) {
		compat_negot = 2;
	}
	if (compat_negot) {
		parport_negotiate(pp->pdev->port, IEEE1284_MODE_COMPAT);
		dev_dbg(&pp->pdev->dev,
			"negotiated back to compatibility mode because user-space forgot\n");
	}

	if (pp->flags & PP_CLAIMED) {
		struct ieee1284_info *info;

		info = &pp->pdev->port->ieee1284;
		pp->state.mode = info->mode;
		pp->state.phase = info->phase;
		info->mode = pp->saved_state.mode;
		info->phase = pp->saved_state.phase;
		parport_release(pp->pdev);
		if (compat_negot != 1) {
			pr_debug(CHRDEV "%x: released pardevice "
				"because user-space forgot\n", minor);
		}
	}

	if (pp->pdev) {
		parport_unregister_device(pp->pdev);
		ida_simple_remove(&ida_index, pp->index);
		pp->pdev = NULL;
		pr_debug(CHRDEV "%x: unregistered pardevice\n", minor);
	}

	kfree(pp);

	return 0;
}

/* No kernel lock held - fine */
static __poll_t pp_poll(struct file *file, poll_table *wait)
{
	struct pp_struct *pp = file->private_data;
	__poll_t mask = 0;

	poll_wait(file, &pp->irq_wait, wait);
	if (atomic_read(&pp->irqc))
		mask |= EPOLLIN | EPOLLRDNORM;

	return mask;
}

static struct class *ppdev_class;

static const struct file_operations pp_fops = {
	.owner		= THIS_MODULE,
	.llseek		= no_llseek,
	.read		= pp_read,
	.write		= pp_write,
	.poll		= pp_poll,
	.unlocked_ioctl	= pp_ioctl,
#ifdef CONFIG_COMPAT
	.compat_ioctl   = pp_compat_ioctl,
#endif
	.open		= pp_open,
	.release	= pp_release,
};

static void pp_attach(struct parport *port)
{
	struct device *ret;

	if (devices[port->number])
		return;

	ret = device_create(ppdev_class, port->dev,
			    MKDEV(PP_MAJOR, port->number), NULL,
			    "parport%d", port->number);
	if (IS_ERR(ret)) {
		pr_err("Failed to create device parport%d\n",
		       port->number);
		return;
	}
	devices[port->number] = ret;
}

static void pp_detach(struct parport *port)
{
	if (!devices[port->number])
		return;

	device_destroy(ppdev_class, MKDEV(PP_MAJOR, port->number));
	devices[port->number] = NULL;
}

static int pp_probe(struct pardevice *par_dev)
{
	struct device_driver *drv = par_dev->dev.driver;
	int len = strlen(drv->name);

	if (strncmp(par_dev->name, drv->name, len))
		return -ENODEV;

	return 0;
}

static struct parport_driver pp_driver = {
	.name		= CHRDEV,
	.probe		= pp_probe,
	.match_port	= pp_attach,
	.detach		= pp_detach,
	.devmodel	= true,
};

static int __init ppdev_init(void)
{
	int err = 0;

	if (register_chrdev(PP_MAJOR, CHRDEV, &pp_fops)) {
		pr_warn(CHRDEV ": unable to get major %d\n", PP_MAJOR);
		return -EIO;
	}
	ppdev_class = class_create(THIS_MODULE, CHRDEV);
	if (IS_ERR(ppdev_class)) {
		err = PTR_ERR(ppdev_class);
		goto out_chrdev;
	}
	err = parport_register_driver(&pp_driver);
	if (err < 0) {
		pr_warn(CHRDEV ": unable to register with parport\n");
		goto out_class;
	}

	pr_info(PP_VERSION "\n");
	goto out;

out_class:
	class_destroy(ppdev_class);
out_chrdev:
	unregister_chrdev(PP_MAJOR, CHRDEV);
out:
	return err;
}

static void __exit ppdev_cleanup(void)
{
	/* Clean up all parport stuff */
	parport_unregister_driver(&pp_driver);
	class_destroy(ppdev_class);
	unregister_chrdev(PP_MAJOR, CHRDEV);
}

module_init(ppdev_init);
module_exit(ppdev_cleanup);

MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV_MAJOR(PP_MAJOR);