Contributors: 15
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| Jonas Aaberg |
248 |
23.64% |
2 |
5.71% |
| Alessandro Rubini |
244 |
23.26% |
2 |
5.71% |
| Rabin Vincent |
142 |
13.54% |
1 |
2.86% |
| Linus Walleij |
116 |
11.06% |
12 |
34.29% |
| Stephen Warren |
83 |
7.91% |
1 |
2.86% |
| Daniel Lezcano |
62 |
5.91% |
4 |
11.43% |
| Viresh Kumar |
56 |
5.34% |
1 |
2.86% |
| Fabio Baltieri |
48 |
4.58% |
1 |
2.86% |
| Russell King |
30 |
2.86% |
4 |
11.43% |
| Stephen Boyd |
4 |
0.38% |
2 |
5.71% |
| Rafał Miłecki |
4 |
0.38% |
1 |
2.86% |
| Marc Zyngier |
4 |
0.38% |
1 |
2.86% |
| Srinidhi Kasagar |
4 |
0.38% |
1 |
2.86% |
| Thomas Gleixner |
2 |
0.19% |
1 |
2.86% |
| Arnd Bergmann |
2 |
0.19% |
1 |
2.86% |
| Total |
1049 |
|
35 |
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2008 STMicroelectronics
* Copyright (C) 2010 Alessandro Rubini
* Copyright (C) 2010 Linus Walleij for ST-Ericsson
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
#include <linux/jiffies.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/sched_clock.h>
#include <asm/mach/time.h>
/*
* The MTU device hosts four different counters, with 4 set of
* registers. These are register names.
*/
#define MTU_IMSC 0x00 /* Interrupt mask set/clear */
#define MTU_RIS 0x04 /* Raw interrupt status */
#define MTU_MIS 0x08 /* Masked interrupt status */
#define MTU_ICR 0x0C /* Interrupt clear register */
/* per-timer registers take 0..3 as argument */
#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */
#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */
#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */
#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */
/* bits for the control register */
#define MTU_CRn_ENA 0x80
#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */
#define MTU_CRn_PRESCALE_MASK 0x0c
#define MTU_CRn_PRESCALE_1 0x00
#define MTU_CRn_PRESCALE_16 0x04
#define MTU_CRn_PRESCALE_256 0x08
#define MTU_CRn_32BITS 0x02
#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/
/* Other registers are usual amba/primecell registers, currently not used */
#define MTU_ITCR 0xff0
#define MTU_ITOP 0xff4
#define MTU_PERIPH_ID0 0xfe0
#define MTU_PERIPH_ID1 0xfe4
#define MTU_PERIPH_ID2 0xfe8
#define MTU_PERIPH_ID3 0xfeC
#define MTU_PCELL0 0xff0
#define MTU_PCELL1 0xff4
#define MTU_PCELL2 0xff8
#define MTU_PCELL3 0xffC
static void __iomem *mtu_base;
static bool clkevt_periodic;
static u32 clk_prescale;
static u32 nmdk_cycle; /* write-once */
static struct delay_timer mtu_delay_timer;
/*
* Override the global weak sched_clock symbol with this
* local implementation which uses the clocksource to get some
* better resolution when scheduling the kernel.
*/
static u64 notrace nomadik_read_sched_clock(void)
{
if (unlikely(!mtu_base))
return 0;
return -readl(mtu_base + MTU_VAL(0));
}
static unsigned long nmdk_timer_read_current_timer(void)
{
return ~readl_relaxed(mtu_base + MTU_VAL(0));
}
/* Clockevent device: use one-shot mode */
static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
{
writel(1 << 1, mtu_base + MTU_IMSC);
writel(evt, mtu_base + MTU_LR(1));
/* Load highest value, enable device, enable interrupts */
writel(MTU_CRn_ONESHOT | clk_prescale |
MTU_CRn_32BITS | MTU_CRn_ENA,
mtu_base + MTU_CR(1));
return 0;
}
static void nmdk_clkevt_reset(void)
{
if (clkevt_periodic) {
/* Timer: configure load and background-load, and fire it up */
writel(nmdk_cycle, mtu_base + MTU_LR(1));
writel(nmdk_cycle, mtu_base + MTU_BGLR(1));
writel(MTU_CRn_PERIODIC | clk_prescale |
MTU_CRn_32BITS | MTU_CRn_ENA,
mtu_base + MTU_CR(1));
writel(1 << 1, mtu_base + MTU_IMSC);
} else {
/* Generate an interrupt to start the clockevent again */
(void) nmdk_clkevt_next(nmdk_cycle, NULL);
}
}
static int nmdk_clkevt_shutdown(struct clock_event_device *evt)
{
writel(0, mtu_base + MTU_IMSC);
/* disable timer */
writel(0, mtu_base + MTU_CR(1));
/* load some high default value */
writel(0xffffffff, mtu_base + MTU_LR(1));
return 0;
}
static int nmdk_clkevt_set_oneshot(struct clock_event_device *evt)
{
clkevt_periodic = false;
return 0;
}
static int nmdk_clkevt_set_periodic(struct clock_event_device *evt)
{
clkevt_periodic = true;
nmdk_clkevt_reset();
return 0;
}
static void nmdk_clksrc_reset(void)
{
/* Disable */
writel(0, mtu_base + MTU_CR(0));
/* ClockSource: configure load and background-load, and fire it up */
writel(nmdk_cycle, mtu_base + MTU_LR(0));
writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA,
mtu_base + MTU_CR(0));
}
static void nmdk_clkevt_resume(struct clock_event_device *cedev)
{
nmdk_clkevt_reset();
nmdk_clksrc_reset();
}
static struct clock_event_device nmdk_clkevt = {
.name = "mtu_1",
.features = CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_DYNIRQ,
.rating = 200,
.set_state_shutdown = nmdk_clkevt_shutdown,
.set_state_periodic = nmdk_clkevt_set_periodic,
.set_state_oneshot = nmdk_clkevt_set_oneshot,
.set_next_event = nmdk_clkevt_next,
.resume = nmdk_clkevt_resume,
};
/*
* IRQ Handler for timer 1 of the MTU block.
*/
static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evdev = dev_id;
writel(1 << 1, mtu_base + MTU_ICR); /* Interrupt clear reg */
evdev->event_handler(evdev);
return IRQ_HANDLED;
}
static struct irqaction nmdk_timer_irq = {
.name = "Nomadik Timer Tick",
.flags = IRQF_TIMER,
.handler = nmdk_timer_interrupt,
.dev_id = &nmdk_clkevt,
};
static int __init nmdk_timer_init(void __iomem *base, int irq,
struct clk *pclk, struct clk *clk)
{
unsigned long rate;
int ret;
mtu_base = base;
BUG_ON(clk_prepare_enable(pclk));
BUG_ON(clk_prepare_enable(clk));
/*
* Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
* for ux500.
* Use a divide-by-16 counter if the tick rate is more than 32MHz.
* At 32 MHz, the timer (with 32 bit counter) can be programmed
* to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
* with 16 gives too low timer resolution.
*/
rate = clk_get_rate(clk);
if (rate > 32000000) {
rate /= 16;
clk_prescale = MTU_CRn_PRESCALE_16;
} else {
clk_prescale = MTU_CRn_PRESCALE_1;
}
/* Cycles for periodic mode */
nmdk_cycle = DIV_ROUND_CLOSEST(rate, HZ);
/* Timer 0 is the free running clocksource */
nmdk_clksrc_reset();
ret = clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0",
rate, 200, 32, clocksource_mmio_readl_down);
if (ret) {
pr_err("timer: failed to initialize clock source %s\n", "mtu_0");
return ret;
}
sched_clock_register(nomadik_read_sched_clock, 32, rate);
/* Timer 1 is used for events, register irq and clockevents */
setup_irq(irq, &nmdk_timer_irq);
nmdk_clkevt.cpumask = cpumask_of(0);
nmdk_clkevt.irq = irq;
clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU);
mtu_delay_timer.read_current_timer = &nmdk_timer_read_current_timer;
mtu_delay_timer.freq = rate;
register_current_timer_delay(&mtu_delay_timer);
return 0;
}
static int __init nmdk_timer_of_init(struct device_node *node)
{
struct clk *pclk;
struct clk *clk;
void __iomem *base;
int irq;
base = of_iomap(node, 0);
if (!base) {
pr_err("Can't remap registers\n");
return -ENXIO;
}
pclk = of_clk_get_by_name(node, "apb_pclk");
if (IS_ERR(pclk)) {
pr_err("could not get apb_pclk\n");
return PTR_ERR(pclk);
}
clk = of_clk_get_by_name(node, "timclk");
if (IS_ERR(clk)) {
pr_err("could not get timclk\n");
return PTR_ERR(clk);
}
irq = irq_of_parse_and_map(node, 0);
if (irq <= 0) {
pr_err("Can't parse IRQ\n");
return -EINVAL;
}
return nmdk_timer_init(base, irq, pclk, clk);
}
TIMER_OF_DECLARE(nomadik_mtu, "st,nomadik-mtu",
nmdk_timer_of_init);