Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Rabin Vincent | 1295 | 48.25% | 1 | 2.27% |
Linus Walleij | 733 | 27.31% | 16 | 36.36% |
Patrice Chotard | 363 | 13.52% | 5 | 11.36% |
Viresh Kumar | 71 | 2.65% | 1 | 2.27% |
Lennert Buytenhek | 41 | 1.53% | 1 | 2.27% |
Laura Abbott | 34 | 1.27% | 1 | 2.27% |
Vipul Kumar Samar | 28 | 1.04% | 1 | 2.27% |
Chris Blair | 22 | 0.82% | 1 | 2.27% |
Wolfram Sang | 14 | 0.52% | 1 | 2.27% |
SF Markus Elfring | 13 | 0.48% | 4 | 9.09% |
Lee Jones | 12 | 0.45% | 1 | 2.27% |
Vasiliy Kulikov | 12 | 0.45% | 1 | 2.27% |
Gabriel Fernandez | 9 | 0.34% | 1 | 2.27% |
Colin Ian King | 9 | 0.34% | 1 | 2.27% |
Thierry Reding | 9 | 0.34% | 2 | 4.55% |
Paul Gortmaker | 8 | 0.30% | 1 | 2.27% |
Bhupesh Sharma | 4 | 0.15% | 1 | 2.27% |
Thomas Gleixner | 2 | 0.07% | 1 | 2.27% |
Gustavo A. R. Silva | 2 | 0.07% | 1 | 2.27% |
Dan Carpenter | 2 | 0.07% | 1 | 2.27% |
Julia Lawall | 1 | 0.04% | 1 | 2.27% |
Total | 2684 | 44 |
// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) ST-Ericsson SA 2010 * * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson */ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/gpio/driver.h> #include <linux/interrupt.h> #include <linux/of.h> #include <linux/mfd/stmpe.h> #include <linux/seq_file.h> #include <linux/bitops.h> /* * These registers are modified under the irq bus lock and cached to avoid * unnecessary writes in bus_sync_unlock. */ enum { REG_RE, REG_FE, REG_IE }; enum { LSB, CSB, MSB }; #define CACHE_NR_REGS 3 /* No variant has more than 24 GPIOs */ #define CACHE_NR_BANKS (24 / 8) struct stmpe_gpio { struct gpio_chip chip; struct stmpe *stmpe; struct device *dev; struct mutex irq_lock; u32 norequest_mask; /* Caches of interrupt control registers for bus_lock */ u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS]; u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS]; }; static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset) { struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); struct stmpe *stmpe = stmpe_gpio->stmpe; u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB + (offset / 8)]; u8 mask = BIT(offset % 8); int ret; ret = stmpe_reg_read(stmpe, reg); if (ret < 0) return ret; return !!(ret & mask); } static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val) { struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); struct stmpe *stmpe = stmpe_gpio->stmpe; int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB; u8 reg = stmpe->regs[which + (offset / 8)]; u8 mask = BIT(offset % 8); /* * Some variants have single register for gpio set/clear functionality. * For them we need to write 0 to clear and 1 to set. */ if (stmpe->regs[STMPE_IDX_GPSR_LSB] == stmpe->regs[STMPE_IDX_GPCR_LSB]) stmpe_set_bits(stmpe, reg, mask, val ? mask : 0); else stmpe_reg_write(stmpe, reg, mask); } static int stmpe_gpio_get_direction(struct gpio_chip *chip, unsigned offset) { struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); struct stmpe *stmpe = stmpe_gpio->stmpe; u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8); u8 mask = BIT(offset % 8); int ret; ret = stmpe_reg_read(stmpe, reg); if (ret < 0) return ret; return !(ret & mask); } static int stmpe_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int val) { struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); struct stmpe *stmpe = stmpe_gpio->stmpe; u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)]; u8 mask = BIT(offset % 8); stmpe_gpio_set(chip, offset, val); return stmpe_set_bits(stmpe, reg, mask, mask); } static int stmpe_gpio_direction_input(struct gpio_chip *chip, unsigned offset) { struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); struct stmpe *stmpe = stmpe_gpio->stmpe; u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)]; u8 mask = BIT(offset % 8); return stmpe_set_bits(stmpe, reg, mask, 0); } static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset) { struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); struct stmpe *stmpe = stmpe_gpio->stmpe; if (stmpe_gpio->norequest_mask & BIT(offset)) return -EINVAL; return stmpe_set_altfunc(stmpe, BIT(offset), STMPE_BLOCK_GPIO); } static const struct gpio_chip template_chip = { .label = "stmpe", .owner = THIS_MODULE, .get_direction = stmpe_gpio_get_direction, .direction_input = stmpe_gpio_direction_input, .get = stmpe_gpio_get, .direction_output = stmpe_gpio_direction_output, .set = stmpe_gpio_set, .request = stmpe_gpio_request, .can_sleep = true, }; static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); int offset = d->hwirq; int regoffset = offset / 8; int mask = BIT(offset % 8); if (type & IRQ_TYPE_LEVEL_LOW || type & IRQ_TYPE_LEVEL_HIGH) return -EINVAL; /* STMPE801 and STMPE 1600 don't have RE and FE registers */ if (stmpe_gpio->stmpe->partnum == STMPE801 || stmpe_gpio->stmpe->partnum == STMPE1600) return 0; if (type & IRQ_TYPE_EDGE_RISING) stmpe_gpio->regs[REG_RE][regoffset] |= mask; else stmpe_gpio->regs[REG_RE][regoffset] &= ~mask; if (type & IRQ_TYPE_EDGE_FALLING) stmpe_gpio->regs[REG_FE][regoffset] |= mask; else stmpe_gpio->regs[REG_FE][regoffset] &= ~mask; return 0; } static void stmpe_gpio_irq_lock(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); mutex_lock(&stmpe_gpio->irq_lock); } static void stmpe_gpio_irq_sync_unlock(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); struct stmpe *stmpe = stmpe_gpio->stmpe; int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); static const u8 regmap[CACHE_NR_REGS][CACHE_NR_BANKS] = { [REG_RE][LSB] = STMPE_IDX_GPRER_LSB, [REG_RE][CSB] = STMPE_IDX_GPRER_CSB, [REG_RE][MSB] = STMPE_IDX_GPRER_MSB, [REG_FE][LSB] = STMPE_IDX_GPFER_LSB, [REG_FE][CSB] = STMPE_IDX_GPFER_CSB, [REG_FE][MSB] = STMPE_IDX_GPFER_MSB, [REG_IE][LSB] = STMPE_IDX_IEGPIOR_LSB, [REG_IE][CSB] = STMPE_IDX_IEGPIOR_CSB, [REG_IE][MSB] = STMPE_IDX_IEGPIOR_MSB, }; int i, j; /* * STMPE1600: to be able to get IRQ from pins, * a read must be done on GPMR register, or a write in * GPSR or GPCR registers */ if (stmpe->partnum == STMPE1600) { stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_LSB]); stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_CSB]); } for (i = 0; i < CACHE_NR_REGS; i++) { /* STMPE801 and STMPE1600 don't have RE and FE registers */ if ((stmpe->partnum == STMPE801 || stmpe->partnum == STMPE1600) && (i != REG_IE)) continue; for (j = 0; j < num_banks; j++) { u8 old = stmpe_gpio->oldregs[i][j]; u8 new = stmpe_gpio->regs[i][j]; if (new == old) continue; stmpe_gpio->oldregs[i][j] = new; stmpe_reg_write(stmpe, stmpe->regs[regmap[i][j]], new); } } mutex_unlock(&stmpe_gpio->irq_lock); } static void stmpe_gpio_irq_mask(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); int offset = d->hwirq; int regoffset = offset / 8; int mask = BIT(offset % 8); stmpe_gpio->regs[REG_IE][regoffset] &= ~mask; } static void stmpe_gpio_irq_unmask(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); int offset = d->hwirq; int regoffset = offset / 8; int mask = BIT(offset % 8); stmpe_gpio->regs[REG_IE][regoffset] |= mask; } static void stmpe_dbg_show_one(struct seq_file *s, struct gpio_chip *gc, unsigned offset, unsigned gpio) { struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); struct stmpe *stmpe = stmpe_gpio->stmpe; const char *label = gpiochip_is_requested(gc, offset); bool val = !!stmpe_gpio_get(gc, offset); u8 bank = offset / 8; u8 dir_reg = stmpe->regs[STMPE_IDX_GPDR_LSB + bank]; u8 mask = BIT(offset % 8); int ret; u8 dir; ret = stmpe_reg_read(stmpe, dir_reg); if (ret < 0) return; dir = !!(ret & mask); if (dir) { seq_printf(s, " gpio-%-3d (%-20.20s) out %s", gpio, label ?: "(none)", val ? "hi" : "lo"); } else { u8 edge_det_reg; u8 rise_reg; u8 fall_reg; u8 irqen_reg; static const char * const edge_det_values[] = { "edge-inactive", "edge-asserted", "not-supported" }; static const char * const rise_values[] = { "no-rising-edge-detection", "rising-edge-detection", "not-supported" }; static const char * const fall_values[] = { "no-falling-edge-detection", "falling-edge-detection", "not-supported" }; #define NOT_SUPPORTED_IDX 2 u8 edge_det = NOT_SUPPORTED_IDX; u8 rise = NOT_SUPPORTED_IDX; u8 fall = NOT_SUPPORTED_IDX; bool irqen; switch (stmpe->partnum) { case STMPE610: case STMPE811: case STMPE1601: case STMPE2401: case STMPE2403: edge_det_reg = stmpe->regs[STMPE_IDX_GPEDR_LSB + bank]; ret = stmpe_reg_read(stmpe, edge_det_reg); if (ret < 0) return; edge_det = !!(ret & mask); /* fall through */ case STMPE1801: rise_reg = stmpe->regs[STMPE_IDX_GPRER_LSB + bank]; fall_reg = stmpe->regs[STMPE_IDX_GPFER_LSB + bank]; ret = stmpe_reg_read(stmpe, rise_reg); if (ret < 0) return; rise = !!(ret & mask); ret = stmpe_reg_read(stmpe, fall_reg); if (ret < 0) return; fall = !!(ret & mask); /* fall through */ case STMPE801: case STMPE1600: irqen_reg = stmpe->regs[STMPE_IDX_IEGPIOR_LSB + bank]; break; default: return; } ret = stmpe_reg_read(stmpe, irqen_reg); if (ret < 0) return; irqen = !!(ret & mask); seq_printf(s, " gpio-%-3d (%-20.20s) in %s %13s %13s %25s %25s", gpio, label ?: "(none)", val ? "hi" : "lo", edge_det_values[edge_det], irqen ? "IRQ-enabled" : "IRQ-disabled", rise_values[rise], fall_values[fall]); } } static void stmpe_dbg_show(struct seq_file *s, struct gpio_chip *gc) { unsigned i; unsigned gpio = gc->base; for (i = 0; i < gc->ngpio; i++, gpio++) { stmpe_dbg_show_one(s, gc, i, gpio); seq_putc(s, '\n'); } } static struct irq_chip stmpe_gpio_irq_chip = { .name = "stmpe-gpio", .irq_bus_lock = stmpe_gpio_irq_lock, .irq_bus_sync_unlock = stmpe_gpio_irq_sync_unlock, .irq_mask = stmpe_gpio_irq_mask, .irq_unmask = stmpe_gpio_irq_unmask, .irq_set_type = stmpe_gpio_irq_set_type, }; #define MAX_GPIOS 24 static irqreturn_t stmpe_gpio_irq(int irq, void *dev) { struct stmpe_gpio *stmpe_gpio = dev; struct stmpe *stmpe = stmpe_gpio->stmpe; u8 statmsbreg; int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); u8 status[DIV_ROUND_UP(MAX_GPIOS, 8)]; int ret; int i; /* * the stmpe_block_read() call below, imposes to set statmsbreg * with the register located at the lowest address. As STMPE1600 * variant is the only one which respect registers address's order * (LSB regs located at lowest address than MSB ones) whereas all * the others have a registers layout with MSB located before the * LSB regs. */ if (stmpe->partnum == STMPE1600) statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_LSB]; else statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_MSB]; ret = stmpe_block_read(stmpe, statmsbreg, num_banks, status); if (ret < 0) return IRQ_NONE; for (i = 0; i < num_banks; i++) { int bank = (stmpe_gpio->stmpe->partnum == STMPE1600) ? i : num_banks - i - 1; unsigned int enabled = stmpe_gpio->regs[REG_IE][bank]; unsigned int stat = status[i]; stat &= enabled; if (!stat) continue; while (stat) { int bit = __ffs(stat); int line = bank * 8 + bit; int child_irq = irq_find_mapping(stmpe_gpio->chip.irq.domain, line); handle_nested_irq(child_irq); stat &= ~BIT(bit); } /* * interrupt status register write has no effect on * 801/1801/1600, bits are cleared when read. * Edge detect register is not present on 801/1600/1801 */ if (stmpe->partnum != STMPE801 && stmpe->partnum != STMPE1600 && stmpe->partnum != STMPE1801) { stmpe_reg_write(stmpe, statmsbreg + i, status[i]); stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_GPEDR_MSB] + i, status[i]); } } return IRQ_HANDLED; } static int stmpe_gpio_probe(struct platform_device *pdev) { struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent); struct device_node *np = pdev->dev.of_node; struct stmpe_gpio *stmpe_gpio; int ret, irq; if (stmpe->num_gpios > MAX_GPIOS) { dev_err(&pdev->dev, "Need to increase maximum GPIO number\n"); return -EINVAL; } stmpe_gpio = kzalloc(sizeof(*stmpe_gpio), GFP_KERNEL); if (!stmpe_gpio) return -ENOMEM; mutex_init(&stmpe_gpio->irq_lock); stmpe_gpio->dev = &pdev->dev; stmpe_gpio->stmpe = stmpe; stmpe_gpio->chip = template_chip; stmpe_gpio->chip.ngpio = stmpe->num_gpios; stmpe_gpio->chip.parent = &pdev->dev; stmpe_gpio->chip.of_node = np; stmpe_gpio->chip.base = -1; if (IS_ENABLED(CONFIG_DEBUG_FS)) stmpe_gpio->chip.dbg_show = stmpe_dbg_show; of_property_read_u32(np, "st,norequest-mask", &stmpe_gpio->norequest_mask); if (stmpe_gpio->norequest_mask) stmpe_gpio->chip.irq.need_valid_mask = true; irq = platform_get_irq(pdev, 0); if (irq < 0) dev_info(&pdev->dev, "device configured in no-irq mode: " "irqs are not available\n"); ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO); if (ret) goto out_free; ret = gpiochip_add_data(&stmpe_gpio->chip, stmpe_gpio); if (ret) { dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret); goto out_disable; } if (irq > 0) { ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, stmpe_gpio_irq, IRQF_ONESHOT, "stmpe-gpio", stmpe_gpio); if (ret) { dev_err(&pdev->dev, "unable to get irq: %d\n", ret); goto out_disable; } if (stmpe_gpio->norequest_mask) { int i; /* Forbid unused lines to be mapped as IRQs */ for (i = 0; i < sizeof(u32); i++) if (stmpe_gpio->norequest_mask & BIT(i)) clear_bit(i, stmpe_gpio->chip.irq.valid_mask); } ret = gpiochip_irqchip_add_nested(&stmpe_gpio->chip, &stmpe_gpio_irq_chip, 0, handle_simple_irq, IRQ_TYPE_NONE); if (ret) { dev_err(&pdev->dev, "could not connect irqchip to gpiochip\n"); goto out_disable; } gpiochip_set_nested_irqchip(&stmpe_gpio->chip, &stmpe_gpio_irq_chip, irq); } platform_set_drvdata(pdev, stmpe_gpio); return 0; out_disable: stmpe_disable(stmpe, STMPE_BLOCK_GPIO); gpiochip_remove(&stmpe_gpio->chip); out_free: kfree(stmpe_gpio); return ret; } static struct platform_driver stmpe_gpio_driver = { .driver = { .suppress_bind_attrs = true, .name = "stmpe-gpio", }, .probe = stmpe_gpio_probe, }; static int __init stmpe_gpio_init(void) { return platform_driver_register(&stmpe_gpio_driver); } subsys_initcall(stmpe_gpio_init);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1