Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Nandor Han | 1161 | 98.89% | 1 | 33.33% |
Laura Abbott | 11 | 0.94% | 1 | 33.33% |
Thomas Gleixner | 2 | 0.17% | 1 | 33.33% |
Total | 1174 | 3 |
// SPDX-License-Identifier: GPL-2.0-only /* * GPIO driver for EXAR XRA1403 16-bit GPIO expander * * Copyright (c) 2017, General Electric Company */ #include <linux/bitops.h> #include <linux/gpio/driver.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/mutex.h> #include <linux/of_device.h> #include <linux/of_gpio.h> #include <linux/seq_file.h> #include <linux/spi/spi.h> #include <linux/regmap.h> /* XRA1403 registers */ #define XRA_GSR 0x00 /* GPIO State */ #define XRA_OCR 0x02 /* Output Control */ #define XRA_PIR 0x04 /* Input Polarity Inversion */ #define XRA_GCR 0x06 /* GPIO Configuration */ #define XRA_PUR 0x08 /* Input Internal Pull-up Resistor Enable/Disable */ #define XRA_IER 0x0A /* Input Interrupt Enable */ #define XRA_TSCR 0x0C /* Output Three-State Control */ #define XRA_ISR 0x0E /* Input Interrupt Status */ #define XRA_REIR 0x10 /* Input Rising Edge Interrupt Enable */ #define XRA_FEIR 0x12 /* Input Falling Edge Interrupt Enable */ #define XRA_IFR 0x14 /* Input Filter Enable/Disable */ #define XRA_LAST 0x15 /* Bounds */ struct xra1403 { struct gpio_chip chip; struct regmap *regmap; }; static const struct regmap_config xra1403_regmap_cfg = { .reg_bits = 7, .pad_bits = 1, .val_bits = 8, .max_register = XRA_LAST, }; static unsigned int to_reg(unsigned int reg, unsigned int offset) { return reg + (offset > 7); } static int xra1403_direction_input(struct gpio_chip *chip, unsigned int offset) { struct xra1403 *xra = gpiochip_get_data(chip); return regmap_update_bits(xra->regmap, to_reg(XRA_GCR, offset), BIT(offset % 8), BIT(offset % 8)); } static int xra1403_direction_output(struct gpio_chip *chip, unsigned int offset, int value) { int ret; struct xra1403 *xra = gpiochip_get_data(chip); ret = regmap_update_bits(xra->regmap, to_reg(XRA_GCR, offset), BIT(offset % 8), 0); if (ret) return ret; ret = regmap_update_bits(xra->regmap, to_reg(XRA_OCR, offset), BIT(offset % 8), value ? BIT(offset % 8) : 0); return ret; } static int xra1403_get_direction(struct gpio_chip *chip, unsigned int offset) { int ret; unsigned int val; struct xra1403 *xra = gpiochip_get_data(chip); ret = regmap_read(xra->regmap, to_reg(XRA_GCR, offset), &val); if (ret) return ret; return !!(val & BIT(offset % 8)); } static int xra1403_get(struct gpio_chip *chip, unsigned int offset) { int ret; unsigned int val; struct xra1403 *xra = gpiochip_get_data(chip); ret = regmap_read(xra->regmap, to_reg(XRA_GSR, offset), &val); if (ret) return ret; return !!(val & BIT(offset % 8)); } static void xra1403_set(struct gpio_chip *chip, unsigned int offset, int value) { int ret; struct xra1403 *xra = gpiochip_get_data(chip); ret = regmap_update_bits(xra->regmap, to_reg(XRA_OCR, offset), BIT(offset % 8), value ? BIT(offset % 8) : 0); if (ret) dev_err(chip->parent, "Failed to set pin: %d, ret: %d\n", offset, ret); } #ifdef CONFIG_DEBUG_FS static void xra1403_dbg_show(struct seq_file *s, struct gpio_chip *chip) { int reg; struct xra1403 *xra = gpiochip_get_data(chip); int value[XRA_LAST]; int i; unsigned int gcr; unsigned int gsr; seq_puts(s, "xra reg:"); for (reg = 0; reg <= XRA_LAST; reg++) seq_printf(s, " %2.2x", reg); seq_puts(s, "\n value:"); for (reg = 0; reg < XRA_LAST; reg++) { regmap_read(xra->regmap, reg, &value[reg]); seq_printf(s, " %2.2x", value[reg]); } seq_puts(s, "\n"); gcr = value[XRA_GCR + 1] << 8 | value[XRA_GCR]; gsr = value[XRA_GSR + 1] << 8 | value[XRA_GSR]; for (i = 0; i < chip->ngpio; i++) { const char *label = gpiochip_is_requested(chip, i); if (!label) continue; seq_printf(s, " gpio-%-3d (%-12s) %s %s\n", chip->base + i, label, (gcr & BIT(i)) ? "in" : "out", (gsr & BIT(i)) ? "hi" : "lo"); } } #else #define xra1403_dbg_show NULL #endif static int xra1403_probe(struct spi_device *spi) { struct xra1403 *xra; struct gpio_desc *reset_gpio; int ret; xra = devm_kzalloc(&spi->dev, sizeof(*xra), GFP_KERNEL); if (!xra) return -ENOMEM; /* bring the chip out of reset if reset pin is provided*/ reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(reset_gpio)) dev_warn(&spi->dev, "Could not get reset-gpios\n"); xra->chip.direction_input = xra1403_direction_input; xra->chip.direction_output = xra1403_direction_output; xra->chip.get_direction = xra1403_get_direction; xra->chip.get = xra1403_get; xra->chip.set = xra1403_set; xra->chip.dbg_show = xra1403_dbg_show; xra->chip.ngpio = 16; xra->chip.label = "xra1403"; xra->chip.base = -1; xra->chip.can_sleep = true; xra->chip.parent = &spi->dev; xra->chip.owner = THIS_MODULE; xra->regmap = devm_regmap_init_spi(spi, &xra1403_regmap_cfg); if (IS_ERR(xra->regmap)) { ret = PTR_ERR(xra->regmap); dev_err(&spi->dev, "Failed to allocate regmap: %d\n", ret); return ret; } ret = devm_gpiochip_add_data(&spi->dev, &xra->chip, xra); if (ret < 0) { dev_err(&spi->dev, "Unable to register gpiochip\n"); return ret; } spi_set_drvdata(spi, xra); return 0; } static const struct spi_device_id xra1403_ids[] = { { "xra1403" }, {}, }; MODULE_DEVICE_TABLE(spi, xra1403_ids); static const struct of_device_id xra1403_spi_of_match[] = { { .compatible = "exar,xra1403" }, {}, }; MODULE_DEVICE_TABLE(of, xra1403_spi_of_match); static struct spi_driver xra1403_driver = { .probe = xra1403_probe, .id_table = xra1403_ids, .driver = { .name = "xra1403", .of_match_table = of_match_ptr(xra1403_spi_of_match), }, }; module_spi_driver(xra1403_driver); MODULE_AUTHOR("Nandor Han <nandor.han@ge.com>"); MODULE_AUTHOR("Semi Malinen <semi.malinen@ge.com>"); MODULE_DESCRIPTION("GPIO expander driver for EXAR XRA1403"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1