Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Hans de Goede | 1628 | 99.75% | 6 | 66.67% |
Thomas Gleixner | 2 | 0.12% | 1 | 11.11% |
Arvind Yadav | 1 | 0.06% | 1 | 11.11% |
Colin Ian King | 1 | 0.06% | 1 | 11.11% |
Total | 1632 | 9 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Intel CHT Whiskey Cove PMIC I2C Master driver * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com> * * Based on various non upstream patches to support the CHT Whiskey Cove PMIC: * Copyright (C) 2011 - 2014 Intel Corporation. All rights reserved. */ #include <linux/acpi.h> #include <linux/completion.h> #include <linux/delay.h> #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/irqdomain.h> #include <linux/mfd/intel_soc_pmic.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/power/bq24190_charger.h> #include <linux/slab.h> #define CHT_WC_I2C_CTRL 0x5e24 #define CHT_WC_I2C_CTRL_WR BIT(0) #define CHT_WC_I2C_CTRL_RD BIT(1) #define CHT_WC_I2C_CLIENT_ADDR 0x5e25 #define CHT_WC_I2C_REG_OFFSET 0x5e26 #define CHT_WC_I2C_WRDATA 0x5e27 #define CHT_WC_I2C_RDDATA 0x5e28 #define CHT_WC_EXTCHGRIRQ 0x6e0a #define CHT_WC_EXTCHGRIRQ_CLIENT_IRQ BIT(0) #define CHT_WC_EXTCHGRIRQ_WRITE_IRQ BIT(1) #define CHT_WC_EXTCHGRIRQ_READ_IRQ BIT(2) #define CHT_WC_EXTCHGRIRQ_NACK_IRQ BIT(3) #define CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK ((u8)GENMASK(3, 1)) #define CHT_WC_EXTCHGRIRQ_MSK 0x6e17 struct cht_wc_i2c_adap { struct i2c_adapter adapter; wait_queue_head_t wait; struct irq_chip irqchip; struct mutex adap_lock; struct mutex irqchip_lock; struct regmap *regmap; struct irq_domain *irq_domain; struct i2c_client *client; int client_irq; u8 irq_mask; u8 old_irq_mask; int read_data; bool io_error; bool done; }; static irqreturn_t cht_wc_i2c_adap_thread_handler(int id, void *data) { struct cht_wc_i2c_adap *adap = data; int ret, reg; mutex_lock(&adap->adap_lock); /* Read IRQs */ ret = regmap_read(adap->regmap, CHT_WC_EXTCHGRIRQ, ®); if (ret) { dev_err(&adap->adapter.dev, "Error reading extchgrirq reg\n"); mutex_unlock(&adap->adap_lock); return IRQ_NONE; } reg &= ~adap->irq_mask; /* Reads must be acked after reading the received data. */ ret = regmap_read(adap->regmap, CHT_WC_I2C_RDDATA, &adap->read_data); if (ret) adap->io_error = true; /* * Immediately ack IRQs, so that if new IRQs arrives while we're * handling the previous ones our irq will re-trigger when we're done. */ ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ, reg); if (ret) dev_err(&adap->adapter.dev, "Error writing extchgrirq reg\n"); if (reg & CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK) { adap->io_error |= !!(reg & CHT_WC_EXTCHGRIRQ_NACK_IRQ); adap->done = true; } mutex_unlock(&adap->adap_lock); if (reg & CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK) wake_up(&adap->wait); /* * Do NOT use handle_nested_irq here, the client irq handler will * likely want to do i2c transfers and the i2c controller uses this * interrupt handler as well, so running the client irq handler from * this thread will cause things to lock up. */ if (reg & CHT_WC_EXTCHGRIRQ_CLIENT_IRQ) { /* * generic_handle_irq expects local IRQs to be disabled * as normally it is called from interrupt context. */ local_irq_disable(); generic_handle_irq(adap->client_irq); local_irq_enable(); } return IRQ_HANDLED; } static u32 cht_wc_i2c_adap_master_func(struct i2c_adapter *adap) { /* This i2c adapter only supports SMBUS byte transfers */ return I2C_FUNC_SMBUS_BYTE_DATA; } static int cht_wc_i2c_adap_smbus_xfer(struct i2c_adapter *_adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data *data) { struct cht_wc_i2c_adap *adap = i2c_get_adapdata(_adap); int ret; mutex_lock(&adap->adap_lock); adap->io_error = false; adap->done = false; mutex_unlock(&adap->adap_lock); ret = regmap_write(adap->regmap, CHT_WC_I2C_CLIENT_ADDR, addr); if (ret) return ret; if (read_write == I2C_SMBUS_WRITE) { ret = regmap_write(adap->regmap, CHT_WC_I2C_WRDATA, data->byte); if (ret) return ret; } ret = regmap_write(adap->regmap, CHT_WC_I2C_REG_OFFSET, command); if (ret) return ret; ret = regmap_write(adap->regmap, CHT_WC_I2C_CTRL, (read_write == I2C_SMBUS_WRITE) ? CHT_WC_I2C_CTRL_WR : CHT_WC_I2C_CTRL_RD); if (ret) return ret; ret = wait_event_timeout(adap->wait, adap->done, msecs_to_jiffies(30)); if (ret == 0) { /* * The CHT GPIO controller serializes all IRQs, sometimes * causing significant delays, check status manually. */ cht_wc_i2c_adap_thread_handler(0, adap); if (!adap->done) return -ETIMEDOUT; } ret = 0; mutex_lock(&adap->adap_lock); if (adap->io_error) ret = -EIO; else if (read_write == I2C_SMBUS_READ) data->byte = adap->read_data; mutex_unlock(&adap->adap_lock); return ret; } static const struct i2c_algorithm cht_wc_i2c_adap_algo = { .functionality = cht_wc_i2c_adap_master_func, .smbus_xfer = cht_wc_i2c_adap_smbus_xfer, }; /**** irqchip for the client connected to the extchgr i2c adapter ****/ static void cht_wc_i2c_irq_lock(struct irq_data *data) { struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data); mutex_lock(&adap->irqchip_lock); } static void cht_wc_i2c_irq_sync_unlock(struct irq_data *data) { struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data); int ret; if (adap->irq_mask != adap->old_irq_mask) { ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ_MSK, adap->irq_mask); if (ret == 0) adap->old_irq_mask = adap->irq_mask; else dev_err(&adap->adapter.dev, "Error writing EXTCHGRIRQ_MSK\n"); } mutex_unlock(&adap->irqchip_lock); } static void cht_wc_i2c_irq_enable(struct irq_data *data) { struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data); adap->irq_mask &= ~CHT_WC_EXTCHGRIRQ_CLIENT_IRQ; } static void cht_wc_i2c_irq_disable(struct irq_data *data) { struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data); adap->irq_mask |= CHT_WC_EXTCHGRIRQ_CLIENT_IRQ; } static const struct irq_chip cht_wc_i2c_irq_chip = { .irq_bus_lock = cht_wc_i2c_irq_lock, .irq_bus_sync_unlock = cht_wc_i2c_irq_sync_unlock, .irq_disable = cht_wc_i2c_irq_disable, .irq_enable = cht_wc_i2c_irq_enable, .name = "cht_wc_ext_chrg_irq_chip", }; static const char * const bq24190_suppliers[] = { "tcpm-source-psy-i2c-fusb302" }; static const struct property_entry bq24190_props[] = { PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_suppliers), PROPERTY_ENTRY_BOOL("omit-battery-class"), PROPERTY_ENTRY_BOOL("disable-reset"), { } }; static struct regulator_consumer_supply fusb302_consumer = { .supply = "vbus", /* Must match fusb302 dev_name in intel_cht_int33fe.c */ .dev_name = "i2c-fusb302", }; static const struct regulator_init_data bq24190_vbus_init_data = { .constraints = { /* The name is used in intel_cht_int33fe.c do not change. */ .name = "cht_wc_usb_typec_vbus", .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, .consumer_supplies = &fusb302_consumer, .num_consumer_supplies = 1, }; static struct bq24190_platform_data bq24190_pdata = { .regulator_init_data = &bq24190_vbus_init_data, }; static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev) { struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); struct cht_wc_i2c_adap *adap; struct i2c_board_info board_info = { .type = "bq24190", .addr = 0x6b, .dev_name = "bq24190", .properties = bq24190_props, .platform_data = &bq24190_pdata, }; int ret, reg, irq; irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(&pdev->dev, "Error missing irq resource\n"); return -EINVAL; } adap = devm_kzalloc(&pdev->dev, sizeof(*adap), GFP_KERNEL); if (!adap) return -ENOMEM; init_waitqueue_head(&adap->wait); mutex_init(&adap->adap_lock); mutex_init(&adap->irqchip_lock); adap->irqchip = cht_wc_i2c_irq_chip; adap->regmap = pmic->regmap; adap->adapter.owner = THIS_MODULE; adap->adapter.class = I2C_CLASS_HWMON; adap->adapter.algo = &cht_wc_i2c_adap_algo; strlcpy(adap->adapter.name, "PMIC I2C Adapter", sizeof(adap->adapter.name)); adap->adapter.dev.parent = &pdev->dev; /* Clear and activate i2c-adapter interrupts, disable client IRQ */ adap->old_irq_mask = adap->irq_mask = ~CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK; ret = regmap_read(adap->regmap, CHT_WC_I2C_RDDATA, ®); if (ret) return ret; ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ, ~adap->irq_mask); if (ret) return ret; ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ_MSK, adap->irq_mask); if (ret) return ret; /* Alloc and register client IRQ */ adap->irq_domain = irq_domain_add_linear(pdev->dev.of_node, 1, &irq_domain_simple_ops, NULL); if (!adap->irq_domain) return -ENOMEM; adap->client_irq = irq_create_mapping(adap->irq_domain, 0); if (!adap->client_irq) { ret = -ENOMEM; goto remove_irq_domain; } irq_set_chip_data(adap->client_irq, adap); irq_set_chip_and_handler(adap->client_irq, &adap->irqchip, handle_simple_irq); ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, cht_wc_i2c_adap_thread_handler, IRQF_ONESHOT, "PMIC I2C Adapter", adap); if (ret) goto remove_irq_domain; i2c_set_adapdata(&adap->adapter, adap); ret = i2c_add_adapter(&adap->adapter); if (ret) goto remove_irq_domain; /* * Normally the Whiskey Cove PMIC is paired with a TI bq24292i charger, * connected to this i2c bus, and a max17047 fuel-gauge and a fusb302 * USB Type-C controller connected to another i2c bus. In this setup * the max17047 and fusb302 devices are enumerated through an INT33FE * ACPI device. If this device is present register an i2c-client for * the TI bq24292i charger. */ if (acpi_dev_present("INT33FE", NULL, -1)) { board_info.irq = adap->client_irq; adap->client = i2c_new_device(&adap->adapter, &board_info); if (!adap->client) { ret = -ENOMEM; goto del_adapter; } } platform_set_drvdata(pdev, adap); return 0; del_adapter: i2c_del_adapter(&adap->adapter); remove_irq_domain: irq_domain_remove(adap->irq_domain); return ret; } static int cht_wc_i2c_adap_i2c_remove(struct platform_device *pdev) { struct cht_wc_i2c_adap *adap = platform_get_drvdata(pdev); if (adap->client) i2c_unregister_device(adap->client); i2c_del_adapter(&adap->adapter); irq_domain_remove(adap->irq_domain); return 0; } static const struct platform_device_id cht_wc_i2c_adap_id_table[] = { { .name = "cht_wcove_ext_chgr" }, {}, }; MODULE_DEVICE_TABLE(platform, cht_wc_i2c_adap_id_table); static struct platform_driver cht_wc_i2c_adap_driver = { .probe = cht_wc_i2c_adap_i2c_probe, .remove = cht_wc_i2c_adap_i2c_remove, .driver = { .name = "cht_wcove_ext_chgr", }, .id_table = cht_wc_i2c_adap_id_table, }; module_platform_driver(cht_wc_i2c_adap_driver); MODULE_DESCRIPTION("Intel CHT Whiskey Cove PMIC I2C Master driver"); MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1