Contributors: 11
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| Jens Axboe |
392 |
42.06% |
4 |
10.26% |
| Bartlomiej Zolnierkiewicz |
381 |
40.88% |
26 |
66.67% |
| Tejun Heo |
77 |
8.26% |
1 |
2.56% |
| Ivan Kokshaysky |
60 |
6.44% |
1 |
2.56% |
| Julia Lawall |
10 |
1.07% |
1 |
2.56% |
| Luca Tettamanti |
6 |
0.64% |
1 |
2.56% |
| Alan Cox |
2 |
0.21% |
1 |
2.56% |
| Deepak Saxena |
1 |
0.11% |
1 |
2.56% |
| Thomas Gleixner |
1 |
0.11% |
1 |
2.56% |
| Lucas De Marchi |
1 |
0.11% |
1 |
2.56% |
| Adrian Bunk |
1 |
0.11% |
1 |
2.56% |
| Total |
932 |
|
39 |
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
* Copyright (C) 2007-2011 Bartlomiej Zolnierkiewicz
*
* CYPRESS CY82C693 chipset IDE controller
*
* The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards.
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/ide.h>
#include <linux/init.h>
#include <asm/io.h>
#define DRV_NAME "cy82c693"
/*
* NOTE: the value for busmaster timeout is tricky and I got it by
* trial and error! By using a to low value will cause DMA timeouts
* and drop IDE performance, and by using a to high value will cause
* audio playback to scatter.
* If you know a better value or how to calc it, please let me know.
*/
/* twice the value written in cy82c693ub datasheet */
#define BUSMASTER_TIMEOUT 0x50
/*
* the value above was tested on my machine and it seems to work okay
*/
/* here are the offset definitions for the registers */
#define CY82_IDE_CMDREG 0x04
#define CY82_IDE_ADDRSETUP 0x48
#define CY82_IDE_MASTER_IOR 0x4C
#define CY82_IDE_MASTER_IOW 0x4D
#define CY82_IDE_SLAVE_IOR 0x4E
#define CY82_IDE_SLAVE_IOW 0x4F
#define CY82_IDE_MASTER_8BIT 0x50
#define CY82_IDE_SLAVE_8BIT 0x51
#define CY82_INDEX_PORT 0x22
#define CY82_DATA_PORT 0x23
#define CY82_INDEX_CHANNEL0 0x30
#define CY82_INDEX_CHANNEL1 0x31
#define CY82_INDEX_TIMEOUT 0x32
/*
* set DMA mode a specific channel for CY82C693
*/
static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
const u8 mode = drive->dma_mode;
u8 single = (mode & 0x10) >> 4, index = 0, data = 0;
index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;
data = (mode & 3) | (single << 2);
outb(index, CY82_INDEX_PORT);
outb(data, CY82_DATA_PORT);
/*
* note: below we set the value for Bus Master IDE TimeOut Register
* I'm not absolutely sure what this does, but it solved my problem
* with IDE DMA and sound, so I now can play sound and work with
* my IDE driver at the same time :-)
*
* If you know the correct (best) value for this register please
* let me know - ASK
*/
data = BUSMASTER_TIMEOUT;
outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
outb(data, CY82_DATA_PORT);
}
static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
const unsigned long T = 1000000 / bus_speed;
unsigned int addrCtrl;
struct ide_timing t;
u8 time_16, time_8;
/* select primary or secondary channel */
if (drive->dn > 1) { /* drive is on the secondary channel */
dev = pci_get_slot(dev->bus, dev->devfn+1);
if (!dev) {
printk(KERN_ERR "%s: tune_drive: "
"Cannot find secondary interface!\n",
drive->name);
return;
}
}
ide_timing_compute(drive, drive->pio_mode, &t, T, 1);
time_16 = clamp_val(t.recover - 1, 0, 15) |
(clamp_val(t.active - 1, 0, 15) << 4);
time_8 = clamp_val(t.act8b - 1, 0, 15) |
(clamp_val(t.rec8b - 1, 0, 15) << 4);
/* now let's write the clocks registers */
if ((drive->dn & 1) == 0) {
/*
* set master drive
* address setup control register
* is 32 bit !!!
*/
pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
addrCtrl &= (~0xF);
addrCtrl |= clamp_val(t.setup - 1, 0, 15);
pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
/* now let's set the remaining registers */
pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, time_16);
pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, time_16);
pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, time_8);
} else {
/*
* set slave drive
* address setup control register
* is 32 bit !!!
*/
pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
addrCtrl &= (~0xF0);
addrCtrl |= (clamp_val(t.setup - 1, 0, 15) << 4);
pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
/* now let's set the remaining registers */
pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, time_16);
pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16);
pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8);
}
if (drive->dn > 1)
pci_dev_put(dev);
}
static void init_iops_cy82c693(ide_hwif_t *hwif)
{
static ide_hwif_t *primary;
struct pci_dev *dev = to_pci_dev(hwif->dev);
if (PCI_FUNC(dev->devfn) == 1)
primary = hwif;
else {
hwif->mate = primary;
hwif->channel = 1;
}
}
static const struct ide_port_ops cy82c693_port_ops = {
.set_pio_mode = cy82c693_set_pio_mode,
.set_dma_mode = cy82c693_set_dma_mode,
};
static const struct ide_port_info cy82c693_chipset = {
.name = DRV_NAME,
.init_iops = init_iops_cy82c693,
.port_ops = &cy82c693_port_ops,
.host_flags = IDE_HFLAG_SINGLE,
.pio_mask = ATA_PIO4,
.swdma_mask = ATA_SWDMA2,
.mwdma_mask = ATA_MWDMA2,
};
static int cy82c693_init_one(struct pci_dev *dev,
const struct pci_device_id *id)
{
struct pci_dev *dev2;
int ret = -ENODEV;
/* CY82C693 is more than only a IDE controller.
Function 1 is primary IDE channel, function 2 - secondary. */
if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
PCI_FUNC(dev->devfn) == 1) {
dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
ret = ide_pci_init_two(dev, dev2, &cy82c693_chipset, NULL);
if (ret)
pci_dev_put(dev2);
}
return ret;
}
static void cy82c693_remove(struct pci_dev *dev)
{
struct ide_host *host = pci_get_drvdata(dev);
struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
ide_pci_remove(dev);
pci_dev_put(dev2);
}
static const struct pci_device_id cy82c693_pci_tbl[] = {
{ PCI_VDEVICE(CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693), 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, cy82c693_pci_tbl);
static struct pci_driver cy82c693_pci_driver = {
.name = "Cypress_IDE",
.id_table = cy82c693_pci_tbl,
.probe = cy82c693_init_one,
.remove = cy82c693_remove,
.suspend = ide_pci_suspend,
.resume = ide_pci_resume,
};
static int __init cy82c693_ide_init(void)
{
return ide_pci_register_driver(&cy82c693_pci_driver);
}
static void __exit cy82c693_ide_exit(void)
{
pci_unregister_driver(&cy82c693_pci_driver);
}
module_init(cy82c693_ide_init);
module_exit(cy82c693_ide_exit);
MODULE_AUTHOR("Andreas Krebs, Andre Hedrick, Bartlomiej Zolnierkiewicz");
MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE");
MODULE_LICENSE("GPL");