Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Kevin Tsai | 1672 | 99.41% | 2 | 40.00% |
Javier Martinez Canillas | 7 | 0.42% | 1 | 20.00% |
Thomas Gleixner | 2 | 0.12% | 1 | 20.00% |
Pan Bian | 1 | 0.06% | 1 | 20.00% |
Total | 1682 | 5 |
// SPDX-License-Identifier: GPL-2.0-only /* * CM3232 Ambient Light Sensor * * Copyright (C) 2014-2015 Capella Microsystems Inc. * Author: Kevin Tsai <ktsai@capellamicro.com> * * IIO driver for CM3232 (7-bit I2C slave address 0x10). */ #include <linux/i2c.h> #include <linux/module.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #include <linux/init.h> /* Registers Address */ #define CM3232_REG_ADDR_CMD 0x00 #define CM3232_REG_ADDR_ALS 0x50 #define CM3232_REG_ADDR_ID 0x53 #define CM3232_CMD_ALS_DISABLE BIT(0) #define CM3232_CMD_ALS_IT_SHIFT 2 #define CM3232_CMD_ALS_IT_MASK (BIT(2) | BIT(3) | BIT(4)) #define CM3232_CMD_ALS_IT_DEFAULT (0x01 << CM3232_CMD_ALS_IT_SHIFT) #define CM3232_CMD_ALS_RESET BIT(6) #define CM3232_CMD_DEFAULT CM3232_CMD_ALS_IT_DEFAULT #define CM3232_HW_ID 0x32 #define CM3232_CALIBSCALE_DEFAULT 100000 #define CM3232_CALIBSCALE_RESOLUTION 100000 #define CM3232_MLUX_PER_LUX 1000 #define CM3232_MLUX_PER_BIT_DEFAULT 64 #define CM3232_MLUX_PER_BIT_BASE_IT 100000 static const struct { int val; int val2; u8 it; } cm3232_als_it_scales[] = { {0, 100000, 0}, /* 0.100000 */ {0, 200000, 1}, /* 0.200000 */ {0, 400000, 2}, /* 0.400000 */ {0, 800000, 3}, /* 0.800000 */ {1, 600000, 4}, /* 1.600000 */ {3, 200000, 5}, /* 3.200000 */ }; struct cm3232_als_info { u8 regs_cmd_default; u8 hw_id; int calibscale; int mlux_per_bit; int mlux_per_bit_base_it; }; static struct cm3232_als_info cm3232_als_info_default = { .regs_cmd_default = CM3232_CMD_DEFAULT, .hw_id = CM3232_HW_ID, .calibscale = CM3232_CALIBSCALE_DEFAULT, .mlux_per_bit = CM3232_MLUX_PER_BIT_DEFAULT, .mlux_per_bit_base_it = CM3232_MLUX_PER_BIT_BASE_IT, }; struct cm3232_chip { struct i2c_client *client; struct cm3232_als_info *als_info; u8 regs_cmd; u16 regs_als; }; /** * cm3232_reg_init() - Initialize CM3232 * @chip: pointer of struct cm3232_chip. * * Check and initialize CM3232 ambient light sensor. * * Return: 0 for success; otherwise for error code. */ static int cm3232_reg_init(struct cm3232_chip *chip) { struct i2c_client *client = chip->client; s32 ret; chip->als_info = &cm3232_als_info_default; /* Identify device */ ret = i2c_smbus_read_word_data(client, CM3232_REG_ADDR_ID); if (ret < 0) { dev_err(&chip->client->dev, "Error reading addr_id\n"); return ret; } if ((ret & 0xFF) != chip->als_info->hw_id) return -ENODEV; /* Disable and reset device */ chip->regs_cmd = CM3232_CMD_ALS_DISABLE | CM3232_CMD_ALS_RESET; ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD, chip->regs_cmd); if (ret < 0) { dev_err(&chip->client->dev, "Error writing reg_cmd\n"); return ret; } /* Register default value */ chip->regs_cmd = chip->als_info->regs_cmd_default; /* Configure register */ ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD, chip->regs_cmd); if (ret < 0) dev_err(&chip->client->dev, "Error writing reg_cmd\n"); return ret; } /** * cm3232_read_als_it() - Get sensor integration time * @chip: pointer of struct cm3232_chip * @val: pointer of int to load the integration (sec). * @val2: pointer of int to load the integration time (microsecond). * * Report the current integration time. * * Return: IIO_VAL_INT_PLUS_MICRO for success, otherwise -EINVAL. */ static int cm3232_read_als_it(struct cm3232_chip *chip, int *val, int *val2) { u16 als_it; int i; als_it = chip->regs_cmd; als_it &= CM3232_CMD_ALS_IT_MASK; als_it >>= CM3232_CMD_ALS_IT_SHIFT; for (i = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++) { if (als_it == cm3232_als_it_scales[i].it) { *val = cm3232_als_it_scales[i].val; *val2 = cm3232_als_it_scales[i].val2; return IIO_VAL_INT_PLUS_MICRO; } } return -EINVAL; } /** * cm3232_write_als_it() - Write sensor integration time * @chip: pointer of struct cm3232_chip. * @val: integration time in second. * @val2: integration time in microsecond. * * Convert integration time to sensor value. * * Return: i2c_smbus_write_byte_data command return value. */ static int cm3232_write_als_it(struct cm3232_chip *chip, int val, int val2) { struct i2c_client *client = chip->client; u16 als_it, cmd; int i; s32 ret; for (i = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++) { if (val == cm3232_als_it_scales[i].val && val2 == cm3232_als_it_scales[i].val2) { als_it = cm3232_als_it_scales[i].it; als_it <<= CM3232_CMD_ALS_IT_SHIFT; cmd = chip->regs_cmd & ~CM3232_CMD_ALS_IT_MASK; cmd |= als_it; ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD, cmd); if (ret < 0) return ret; chip->regs_cmd = cmd; return 0; } } return -EINVAL; } /** * cm3232_get_lux() - report current lux value * @chip: pointer of struct cm3232_chip. * * Convert sensor data to lux. It depends on integration * time and calibscale variable. * * Return: Zero or positive value is lux, otherwise error code. */ static int cm3232_get_lux(struct cm3232_chip *chip) { struct i2c_client *client = chip->client; struct cm3232_als_info *als_info = chip->als_info; int ret; int val, val2; int als_it; u64 lux; /* Calculate mlux per bit based on als_it */ ret = cm3232_read_als_it(chip, &val, &val2); if (ret < 0) return -EINVAL; als_it = val * 1000000 + val2; lux = (__force u64)als_info->mlux_per_bit; lux *= als_info->mlux_per_bit_base_it; lux = div_u64(lux, als_it); ret = i2c_smbus_read_word_data(client, CM3232_REG_ADDR_ALS); if (ret < 0) { dev_err(&client->dev, "Error reading reg_addr_als\n"); return ret; } chip->regs_als = (u16)ret; lux *= chip->regs_als; lux *= als_info->calibscale; lux = div_u64(lux, CM3232_CALIBSCALE_RESOLUTION); lux = div_u64(lux, CM3232_MLUX_PER_LUX); if (lux > 0xFFFF) lux = 0xFFFF; return (int)lux; } static int cm3232_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { struct cm3232_chip *chip = iio_priv(indio_dev); struct cm3232_als_info *als_info = chip->als_info; int ret; switch (mask) { case IIO_CHAN_INFO_PROCESSED: ret = cm3232_get_lux(chip); if (ret < 0) return ret; *val = ret; return IIO_VAL_INT; case IIO_CHAN_INFO_CALIBSCALE: *val = als_info->calibscale; return IIO_VAL_INT; case IIO_CHAN_INFO_INT_TIME: return cm3232_read_als_it(chip, val, val2); } return -EINVAL; } static int cm3232_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int val, int val2, long mask) { struct cm3232_chip *chip = iio_priv(indio_dev); struct cm3232_als_info *als_info = chip->als_info; switch (mask) { case IIO_CHAN_INFO_CALIBSCALE: als_info->calibscale = val; return 0; case IIO_CHAN_INFO_INT_TIME: return cm3232_write_als_it(chip, val, val2); } return -EINVAL; } /** * cm3232_get_it_available() - Get available ALS IT value * @dev: pointer of struct device. * @attr: pointer of struct device_attribute. * @buf: pointer of return string buffer. * * Display the available integration time in second. * * Return: string length. */ static ssize_t cm3232_get_it_available(struct device *dev, struct device_attribute *attr, char *buf) { int i, len; for (i = 0, len = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++) len += scnprintf(buf + len, PAGE_SIZE - len, "%u.%06u ", cm3232_als_it_scales[i].val, cm3232_als_it_scales[i].val2); return len + scnprintf(buf + len, PAGE_SIZE - len, "\n"); } static const struct iio_chan_spec cm3232_channels[] = { { .type = IIO_LIGHT, .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_INT_TIME), } }; static IIO_DEVICE_ATTR(in_illuminance_integration_time_available, S_IRUGO, cm3232_get_it_available, NULL, 0); static struct attribute *cm3232_attributes[] = { &iio_dev_attr_in_illuminance_integration_time_available.dev_attr.attr, NULL, }; static const struct attribute_group cm3232_attribute_group = { .attrs = cm3232_attributes }; static const struct iio_info cm3232_info = { .read_raw = &cm3232_read_raw, .write_raw = &cm3232_write_raw, .attrs = &cm3232_attribute_group, }; static int cm3232_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct cm3232_chip *chip; struct iio_dev *indio_dev; int ret; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip)); if (!indio_dev) return -ENOMEM; chip = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); chip->client = client; indio_dev->dev.parent = &client->dev; indio_dev->channels = cm3232_channels; indio_dev->num_channels = ARRAY_SIZE(cm3232_channels); indio_dev->info = &cm3232_info; indio_dev->name = id->name; indio_dev->modes = INDIO_DIRECT_MODE; ret = cm3232_reg_init(chip); if (ret) { dev_err(&client->dev, "%s: register init failed\n", __func__); return ret; } return iio_device_register(indio_dev); } static int cm3232_remove(struct i2c_client *client) { struct iio_dev *indio_dev = i2c_get_clientdata(client); i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD, CM3232_CMD_ALS_DISABLE); iio_device_unregister(indio_dev); return 0; } static const struct i2c_device_id cm3232_id[] = { {"cm3232", 0}, {} }; #ifdef CONFIG_PM_SLEEP static int cm3232_suspend(struct device *dev) { struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); struct cm3232_chip *chip = iio_priv(indio_dev); struct i2c_client *client = chip->client; int ret; chip->regs_cmd |= CM3232_CMD_ALS_DISABLE; ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD, chip->regs_cmd); return ret; } static int cm3232_resume(struct device *dev) { struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); struct cm3232_chip *chip = iio_priv(indio_dev); struct i2c_client *client = chip->client; int ret; chip->regs_cmd &= ~CM3232_CMD_ALS_DISABLE; ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD, chip->regs_cmd | CM3232_CMD_ALS_RESET); return ret; } static const struct dev_pm_ops cm3232_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(cm3232_suspend, cm3232_resume)}; #endif MODULE_DEVICE_TABLE(i2c, cm3232_id); static const struct of_device_id cm3232_of_match[] = { {.compatible = "capella,cm3232"}, {} }; MODULE_DEVICE_TABLE(of, cm3232_of_match); static struct i2c_driver cm3232_driver = { .driver = { .name = "cm3232", .of_match_table = of_match_ptr(cm3232_of_match), #ifdef CONFIG_PM_SLEEP .pm = &cm3232_pm_ops, #endif }, .id_table = cm3232_id, .probe = cm3232_probe, .remove = cm3232_remove, }; module_i2c_driver(cm3232_driver); MODULE_AUTHOR("Kevin Tsai <ktsai@capellamicro.com>"); MODULE_DESCRIPTION("CM3232 ambient light sensor driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1