| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Ralph Campbell | 1417 | 91.83% | 1 | 16.67% |
| CQ Tang | 84 | 5.44% | 1 | 16.67% |
| Dean Luick | 21 | 1.36% | 1 | 16.67% |
| Dave Olson | 18 | 1.17% | 1 | 16.67% |
| Mike Marciniszyn | 2 | 0.13% | 1 | 16.67% |
| Chengguang Xu | 1 | 0.06% | 1 | 16.67% |
| Total | 1543 | 6 |
/* * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation. * All rights reserved. * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the * OpenIB.org BSD license below: * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #ifndef _QIB_COMMON_H #define _QIB_COMMON_H /* * This file contains defines, structures, etc. that are used * to communicate between kernel and user code. */ /* This is the IEEE-assigned OUI for QLogic Inc. QLogic_IB */ #define QIB_SRC_OUI_1 0x00 #define QIB_SRC_OUI_2 0x11 #define QIB_SRC_OUI_3 0x75 /* version of protocol header (known to chip also). In the long run, * we should be able to generate and accept a range of version numbers; * for now we only accept one, and it's compiled in. */ #define IPS_PROTO_VERSION 2 /* * These are compile time constants that you may want to enable or disable * if you are trying to debug problems with code or performance. * QIB_VERBOSE_TRACING define as 1 if you want additional tracing in * fastpath code * QIB_TRACE_REGWRITES define as 1 if you want register writes to be * traced in fastpath code * _QIB_TRACING define as 0 if you want to remove all tracing in a * compilation unit */ /* * The value in the BTH QP field that QLogic_IB uses to differentiate * an qlogic_ib protocol IB packet vs standard IB transport * This it needs to be even (0x656b78), because the LSB is sometimes * used for the MSB of context. The change may cause a problem * interoperating with older software. */ #define QIB_KD_QP 0x656b78 /* * These are the status bits readable (in ascii form, 64bit value) * from the "status" sysfs file. For binary compatibility, values * must remain as is; removed states can be reused for different * purposes. */ #define QIB_STATUS_INITTED 0x1 /* basic initialization done */ /* Chip has been found and initted */ #define QIB_STATUS_CHIP_PRESENT 0x20 /* IB link is at ACTIVE, usable for data traffic */ #define QIB_STATUS_IB_READY 0x40 /* link is configured, LID, MTU, etc. have been set */ #define QIB_STATUS_IB_CONF 0x80 /* A Fatal hardware error has occurred. */ #define QIB_STATUS_HWERROR 0x200 /* * The list of usermode accessible registers. Also see Reg_* later in file. */ enum qib_ureg { /* (RO) DMA RcvHdr to be used next. */ ur_rcvhdrtail = 0, /* (RW) RcvHdr entry to be processed next by host. */ ur_rcvhdrhead = 1, /* (RO) Index of next Eager index to use. */ ur_rcvegrindextail = 2, /* (RW) Eager TID to be processed next */ ur_rcvegrindexhead = 3, /* For internal use only; max register number. */ _QIB_UregMax }; /* bit values for spi_runtime_flags */ #define QIB_RUNTIME_PCIE 0x0002 #define QIB_RUNTIME_FORCE_WC_ORDER 0x0004 #define QIB_RUNTIME_RCVHDR_COPY 0x0008 #define QIB_RUNTIME_MASTER 0x0010 #define QIB_RUNTIME_RCHK 0x0020 #define QIB_RUNTIME_NODMA_RTAIL 0x0080 #define QIB_RUNTIME_SPECIAL_TRIGGER 0x0100 #define QIB_RUNTIME_SDMA 0x0200 #define QIB_RUNTIME_FORCE_PIOAVAIL 0x0400 #define QIB_RUNTIME_PIO_REGSWAPPED 0x0800 #define QIB_RUNTIME_CTXT_MSB_IN_QP 0x1000 #define QIB_RUNTIME_CTXT_REDIRECT 0x2000 #define QIB_RUNTIME_HDRSUPP 0x4000 /* * This structure is returned by qib_userinit() immediately after * open to get implementation-specific info, and info specific to this * instance. * * This struct must have explict pad fields where type sizes * may result in different alignments between 32 and 64 bit * programs, since the 64 bit * bit kernel requires the user code * to have matching offsets */ struct qib_base_info { /* version of hardware, for feature checking. */ __u32 spi_hw_version; /* version of software, for feature checking. */ __u32 spi_sw_version; /* QLogic_IB context assigned, goes into sent packets */ __u16 spi_ctxt; __u16 spi_subctxt; /* * IB MTU, packets IB data must be less than this. * The MTU is in bytes, and will be a multiple of 4 bytes. */ __u32 spi_mtu; /* * Size of a PIO buffer. Any given packet's total size must be less * than this (in words). Included is the starting control word, so * if 513 is returned, then total pkt size is 512 words or less. */ __u32 spi_piosize; /* size of the TID cache in qlogic_ib, in entries */ __u32 spi_tidcnt; /* size of the TID Eager list in qlogic_ib, in entries */ __u32 spi_tidegrcnt; /* size of a single receive header queue entry in words. */ __u32 spi_rcvhdrent_size; /* * Count of receive header queue entries allocated. * This may be less than the spu_rcvhdrcnt passed in!. */ __u32 spi_rcvhdr_cnt; /* per-chip and other runtime features bitmap (QIB_RUNTIME_*) */ __u32 spi_runtime_flags; /* address where hardware receive header queue is mapped */ __u64 spi_rcvhdr_base; /* user program. */ /* base address of eager TID receive buffers used by hardware. */ __u64 spi_rcv_egrbufs; /* Allocated by initialization code, not by protocol. */ /* * Size of each TID buffer in host memory, starting at * spi_rcv_egrbufs. The buffers are virtually contiguous. */ __u32 spi_rcv_egrbufsize; /* * The special QP (queue pair) value that identifies an qlogic_ib * protocol packet from standard IB packets. More, probably much * more, to be added. */ __u32 spi_qpair; /* * User register base for init code, not to be used directly by * protocol or applications. Always points to chip registers, * for normal or shared context. */ __u64 spi_uregbase; /* * Maximum buffer size in bytes that can be used in a single TID * entry (assuming the buffer is aligned to this boundary). This is * the minimum of what the hardware and software support Guaranteed * to be a power of 2. */ __u32 spi_tid_maxsize; /* * alignment of each pio send buffer (byte count * to add to spi_piobufbase to get to second buffer) */ __u32 spi_pioalign; /* * The index of the first pio buffer available to this process; * needed to do lookup in spi_pioavailaddr; not added to * spi_piobufbase. */ __u32 spi_pioindex; /* number of buffers mapped for this process */ __u32 spi_piocnt; /* * Base address of writeonly pio buffers for this process. * Each buffer has spi_piosize words, and is aligned on spi_pioalign * boundaries. spi_piocnt buffers are mapped from this address */ __u64 spi_piobufbase; /* * Base address of readonly memory copy of the pioavail registers. * There are 2 bits for each buffer. */ __u64 spi_pioavailaddr; /* * Address where driver updates a copy of the interface and driver * status (QIB_STATUS_*) as a 64 bit value. It's followed by a * link status qword (formerly combined with driver status), then a * string indicating hardware error, if there was one. */ __u64 spi_status; /* number of chip ctxts available to user processes */ __u32 spi_nctxts; __u16 spi_unit; /* unit number of chip we are using */ __u16 spi_port; /* IB port number we are using */ /* num bufs in each contiguous set */ __u32 spi_rcv_egrperchunk; /* size in bytes of each contiguous set */ __u32 spi_rcv_egrchunksize; /* total size of mmap to cover full rcvegrbuffers */ __u32 spi_rcv_egrbuftotlen; __u32 spi_rhf_offset; /* dword offset in hdrqent for rcvhdr flags */ /* address of readonly memory copy of the rcvhdrq tail register. */ __u64 spi_rcvhdr_tailaddr; /* * shared memory pages for subctxts if ctxt is shared; these cover * all the processes in the group sharing a single context. * all have enough space for the num_subcontexts value on this job. */ __u64 spi_subctxt_uregbase; __u64 spi_subctxt_rcvegrbuf; __u64 spi_subctxt_rcvhdr_base; /* shared memory page for send buffer disarm status */ __u64 spi_sendbuf_status; } __aligned(8); /* * This version number is given to the driver by the user code during * initialization in the spu_userversion field of qib_user_info, so * the driver can check for compatibility with user code. * * The major version changes when data structures * change in an incompatible way. The driver must be the same or higher * for initialization to succeed. In some cases, a higher version * driver will not interoperate with older software, and initialization * will return an error. */ #define QIB_USER_SWMAJOR 1 /* * Minor version differences are always compatible * a within a major version, however if user software is larger * than driver software, some new features and/or structure fields * may not be implemented; the user code must deal with this if it * cares, or it must abort after initialization reports the difference. */ #define QIB_USER_SWMINOR 13 #define QIB_USER_SWVERSION ((QIB_USER_SWMAJOR << 16) | QIB_USER_SWMINOR) #ifndef QIB_KERN_TYPE #define QIB_KERN_TYPE 0 #endif /* * Similarly, this is the kernel version going back to the user. It's * slightly different, in that we want to tell if the driver was built as * part of a QLogic release, or from the driver from openfabrics.org, * kernel.org, or a standard distribution, for support reasons. * The high bit is 0 for non-QLogic and 1 for QLogic-built/supplied. * * It's returned by the driver to the user code during initialization in the * spi_sw_version field of qib_base_info, so the user code can in turn * check for compatibility with the kernel. */ #define QIB_KERN_SWVERSION ((QIB_KERN_TYPE << 31) | QIB_USER_SWVERSION) /* * Define the driver version number. This is something that refers only * to the driver itself, not the software interfaces it supports. */ #define QIB_DRIVER_VERSION_BASE "1.11" /* create the final driver version string */ #ifdef QIB_IDSTR #define QIB_DRIVER_VERSION QIB_DRIVER_VERSION_BASE " " QIB_IDSTR #else #define QIB_DRIVER_VERSION QIB_DRIVER_VERSION_BASE #endif /* * If the unit is specified via open, HCA choice is fixed. If port is * specified, it's also fixed. Otherwise we try to spread contexts * across ports and HCAs, using different algorithims. WITHIN is * the old default, prior to this mechanism. */ #define QIB_PORT_ALG_ACROSS 0 /* round robin contexts across HCAs, then * ports; this is the default */ #define QIB_PORT_ALG_WITHIN 1 /* use all contexts on an HCA (round robin * active ports within), then next HCA */ #define QIB_PORT_ALG_COUNT 2 /* number of algorithm choices */ /* * This structure is passed to qib_userinit() to tell the driver where * user code buffers are, sizes, etc. The offsets and sizes of the * fields must remain unchanged, for binary compatibility. It can * be extended, if userversion is changed so user code can tell, if needed */ struct qib_user_info { /* * version of user software, to detect compatibility issues. * Should be set to QIB_USER_SWVERSION. */ __u32 spu_userversion; __u32 _spu_unused2; /* size of struct base_info to write to */ __u32 spu_base_info_size; __u32 spu_port_alg; /* which QIB_PORT_ALG_*; unused user minor < 11 */ /* * If two or more processes wish to share a context, each process * must set the spu_subctxt_cnt and spu_subctxt_id to the same * values. The only restriction on the spu_subctxt_id is that * it be unique for a given node. */ __u16 spu_subctxt_cnt; __u16 spu_subctxt_id; __u32 spu_port; /* IB port requested by user if > 0 */ /* * address of struct base_info to write to */ __u64 spu_base_info; } __aligned(8); /* User commands. */ /* 16 available, was: old set up userspace (for old user code) */ #define QIB_CMD_CTXT_INFO 17 /* find out what resources we got */ #define QIB_CMD_RECV_CTRL 18 /* control receipt of packets */ #define QIB_CMD_TID_UPDATE 19 /* update expected TID entries */ #define QIB_CMD_TID_FREE 20 /* free expected TID entries */ #define QIB_CMD_SET_PART_KEY 21 /* add partition key */ /* 22 available, was: return info on slave processes (for old user code) */ #define QIB_CMD_ASSIGN_CTXT 23 /* allocate HCA and ctxt */ #define QIB_CMD_USER_INIT 24 /* set up userspace */ #define QIB_CMD_UNUSED_1 25 #define QIB_CMD_UNUSED_2 26 #define QIB_CMD_PIOAVAILUPD 27 /* force an update of PIOAvail reg */ #define QIB_CMD_POLL_TYPE 28 /* set the kind of polling we want */ #define QIB_CMD_ARMLAUNCH_CTRL 29 /* armlaunch detection control */ /* 30 is unused */ #define QIB_CMD_SDMA_INFLIGHT 31 /* sdma inflight counter request */ #define QIB_CMD_SDMA_COMPLETE 32 /* sdma completion counter request */ /* 33 available, was a testing feature */ #define QIB_CMD_DISARM_BUFS 34 /* disarm send buffers w/ errors */ #define QIB_CMD_ACK_EVENT 35 /* ack & clear bits */ #define QIB_CMD_CPUS_LIST 36 /* list of cpus allocated, for pinned * processes: qib_cpus_list */ /* * QIB_CMD_ACK_EVENT obsoletes QIB_CMD_DISARM_BUFS, but we keep it for * compatibility with libraries from previous release. The ACK_EVENT * will take appropriate driver action (if any, just DISARM for now), * then clear the bits passed in as part of the mask. These bits are * in the first 64bit word at spi_sendbuf_status, and are passed to * the driver in the event_mask union as well. */ #define _QIB_EVENT_DISARM_BUFS_BIT 0 #define _QIB_EVENT_LINKDOWN_BIT 1 #define _QIB_EVENT_LID_CHANGE_BIT 2 #define _QIB_EVENT_LMC_CHANGE_BIT 3 #define _QIB_EVENT_SL2VL_CHANGE_BIT 4 #define _QIB_MAX_EVENT_BIT _QIB_EVENT_SL2VL_CHANGE_BIT #define QIB_EVENT_DISARM_BUFS_BIT (1UL << _QIB_EVENT_DISARM_BUFS_BIT) #define QIB_EVENT_LINKDOWN_BIT (1UL << _QIB_EVENT_LINKDOWN_BIT) #define QIB_EVENT_LID_CHANGE_BIT (1UL << _QIB_EVENT_LID_CHANGE_BIT) #define QIB_EVENT_LMC_CHANGE_BIT (1UL << _QIB_EVENT_LMC_CHANGE_BIT) #define QIB_EVENT_SL2VL_CHANGE_BIT (1UL << _QIB_EVENT_SL2VL_CHANGE_BIT) /* * Poll types */ #define QIB_POLL_TYPE_ANYRCV 0x0 #define QIB_POLL_TYPE_URGENT 0x1 struct qib_ctxt_info { __u16 num_active; /* number of active units */ __u16 unit; /* unit (chip) assigned to caller */ __u16 port; /* IB port assigned to caller (1-based) */ __u16 ctxt; /* ctxt on unit assigned to caller */ __u16 subctxt; /* subctxt on unit assigned to caller */ __u16 num_ctxts; /* number of ctxts available on unit */ __u16 num_subctxts; /* number of subctxts opened on ctxt */ __u16 rec_cpu; /* cpu # for affinity (ffff if none) */ }; struct qib_tid_info { __u32 tidcnt; /* make structure same size in 32 and 64 bit */ __u32 tid__unused; /* virtual address of first page in transfer */ __u64 tidvaddr; /* pointer (same size 32/64 bit) to __u16 tid array */ __u64 tidlist; /* * pointer (same size 32/64 bit) to bitmap of TIDs used * for this call; checked for being large enough at open */ __u64 tidmap; }; struct qib_cmd { __u32 type; /* command type */ union { struct qib_tid_info tid_info; struct qib_user_info user_info; /* * address in userspace where we should put the sdma * inflight counter */ __u64 sdma_inflight; /* * address in userspace where we should put the sdma * completion counter */ __u64 sdma_complete; /* address in userspace of struct qib_ctxt_info to write result to */ __u64 ctxt_info; /* enable/disable receipt of packets */ __u32 recv_ctrl; /* enable/disable armlaunch errors (non-zero to enable) */ __u32 armlaunch_ctrl; /* partition key to set */ __u16 part_key; /* user address of __u32 bitmask of active slaves */ __u64 slave_mask_addr; /* type of polling we want */ __u16 poll_type; /* back pressure enable bit for one particular context */ __u8 ctxt_bp; /* qib_user_event_ack(), IPATH_EVENT_* bits */ __u64 event_mask; } cmd; }; struct qib_iovec { /* Pointer to data, but same size 32 and 64 bit */ __u64 iov_base; /* * Length of data; don't need 64 bits, but want * qib_sendpkt to remain same size as before 32 bit changes, so... */ __u64 iov_len; }; /* * Describes a single packet for send. Each packet can have one or more * buffers, but the total length (exclusive of IB headers) must be less * than the MTU, and if using the PIO method, entire packet length, * including IB headers, must be less than the qib_piosize value (words). * Use of this necessitates including sys/uio.h */ struct __qib_sendpkt { __u32 sps_flags; /* flags for packet (TBD) */ __u32 sps_cnt; /* number of entries to use in sps_iov */ /* array of iov's describing packet. TEMPORARY */ struct qib_iovec sps_iov[4]; }; /* * Diagnostics can send a packet by "writing" the following * structs to the diag data special file. * This allows a custom * pbc (+ static rate) qword, so that special modes and deliberate * changes to CRCs can be used. The elements were also re-ordered * for better alignment and to avoid padding issues. */ #define _DIAG_XPKT_VERS 3 struct qib_diag_xpkt { __u16 version; __u16 unit; __u16 port; __u16 len; __u64 data; __u64 pbc_wd; }; /* * Data layout in I2C flash (for GUID, etc.) * All fields are little-endian binary unless otherwise stated */ #define QIB_FLASH_VERSION 2 struct qib_flash { /* flash layout version (QIB_FLASH_VERSION) */ __u8 if_fversion; /* checksum protecting if_length bytes */ __u8 if_csum; /* * valid length (in use, protected by if_csum), including * if_fversion and if_csum themselves) */ __u8 if_length; /* the GUID, in network order */ __u8 if_guid[8]; /* number of GUIDs to use, starting from if_guid */ __u8 if_numguid; /* the (last 10 characters of) board serial number, in ASCII */ char if_serial[12]; /* board mfg date (YYYYMMDD ASCII) */ char if_mfgdate[8]; /* last board rework/test date (YYYYMMDD ASCII) */ char if_testdate[8]; /* logging of error counts, TBD */ __u8 if_errcntp[4]; /* powered on hours, updated at driver unload */ __u8 if_powerhour[2]; /* ASCII free-form comment field */ char if_comment[32]; /* Backwards compatible prefix for longer QLogic Serial Numbers */ char if_sprefix[4]; /* 82 bytes used, min flash size is 128 bytes */ __u8 if_future[46]; }; /* * These are the counters implemented in the chip, and are listed in order. * The InterCaps naming is taken straight from the chip spec. */ struct qlogic_ib_counters { __u64 LBIntCnt; __u64 LBFlowStallCnt; __u64 TxSDmaDescCnt; /* was Reserved1 */ __u64 TxUnsupVLErrCnt; __u64 TxDataPktCnt; __u64 TxFlowPktCnt; __u64 TxDwordCnt; __u64 TxLenErrCnt; __u64 TxMaxMinLenErrCnt; __u64 TxUnderrunCnt; __u64 TxFlowStallCnt; __u64 TxDroppedPktCnt; __u64 RxDroppedPktCnt; __u64 RxDataPktCnt; __u64 RxFlowPktCnt; __u64 RxDwordCnt; __u64 RxLenErrCnt; __u64 RxMaxMinLenErrCnt; __u64 RxICRCErrCnt; __u64 RxVCRCErrCnt; __u64 RxFlowCtrlErrCnt; __u64 RxBadFormatCnt; __u64 RxLinkProblemCnt; __u64 RxEBPCnt; __u64 RxLPCRCErrCnt; __u64 RxBufOvflCnt; __u64 RxTIDFullErrCnt; __u64 RxTIDValidErrCnt; __u64 RxPKeyMismatchCnt; __u64 RxP0HdrEgrOvflCnt; __u64 RxP1HdrEgrOvflCnt; __u64 RxP2HdrEgrOvflCnt; __u64 RxP3HdrEgrOvflCnt; __u64 RxP4HdrEgrOvflCnt; __u64 RxP5HdrEgrOvflCnt; __u64 RxP6HdrEgrOvflCnt; __u64 RxP7HdrEgrOvflCnt; __u64 RxP8HdrEgrOvflCnt; __u64 RxP9HdrEgrOvflCnt; __u64 RxP10HdrEgrOvflCnt; __u64 RxP11HdrEgrOvflCnt; __u64 RxP12HdrEgrOvflCnt; __u64 RxP13HdrEgrOvflCnt; __u64 RxP14HdrEgrOvflCnt; __u64 RxP15HdrEgrOvflCnt; __u64 RxP16HdrEgrOvflCnt; __u64 IBStatusChangeCnt; __u64 IBLinkErrRecoveryCnt; __u64 IBLinkDownedCnt; __u64 IBSymbolErrCnt; __u64 RxVL15DroppedPktCnt; __u64 RxOtherLocalPhyErrCnt; __u64 PcieRetryBufDiagQwordCnt; __u64 ExcessBufferOvflCnt; __u64 LocalLinkIntegrityErrCnt; __u64 RxVlErrCnt; __u64 RxDlidFltrCnt; }; /* * The next set of defines are for packet headers, and chip register * and memory bits that are visible to and/or used by user-mode software. */ /* RcvHdrFlags bits */ #define QLOGIC_IB_RHF_LENGTH_MASK 0x7FF #define QLOGIC_IB_RHF_LENGTH_SHIFT 0 #define QLOGIC_IB_RHF_RCVTYPE_MASK 0x7 #define QLOGIC_IB_RHF_RCVTYPE_SHIFT 11 #define QLOGIC_IB_RHF_EGRINDEX_MASK 0xFFF #define QLOGIC_IB_RHF_EGRINDEX_SHIFT 16 #define QLOGIC_IB_RHF_SEQ_MASK 0xF #define QLOGIC_IB_RHF_SEQ_SHIFT 0 #define QLOGIC_IB_RHF_HDRQ_OFFSET_MASK 0x7FF #define QLOGIC_IB_RHF_HDRQ_OFFSET_SHIFT 4 #define QLOGIC_IB_RHF_H_ICRCERR 0x80000000 #define QLOGIC_IB_RHF_H_VCRCERR 0x40000000 #define QLOGIC_IB_RHF_H_PARITYERR 0x20000000 #define QLOGIC_IB_RHF_H_LENERR 0x10000000 #define QLOGIC_IB_RHF_H_MTUERR 0x08000000 #define QLOGIC_IB_RHF_H_IHDRERR 0x04000000 #define QLOGIC_IB_RHF_H_TIDERR 0x02000000 #define QLOGIC_IB_RHF_H_MKERR 0x01000000 #define QLOGIC_IB_RHF_H_IBERR 0x00800000 #define QLOGIC_IB_RHF_H_ERR_MASK 0xFF800000 #define QLOGIC_IB_RHF_L_USE_EGR 0x80000000 #define QLOGIC_IB_RHF_L_SWA 0x00008000 #define QLOGIC_IB_RHF_L_SWB 0x00004000 /* qlogic_ib header fields */ #define QLOGIC_IB_I_VERS_MASK 0xF #define QLOGIC_IB_I_VERS_SHIFT 28 #define QLOGIC_IB_I_CTXT_MASK 0xF #define QLOGIC_IB_I_CTXT_SHIFT 24 #define QLOGIC_IB_I_TID_MASK 0x7FF #define QLOGIC_IB_I_TID_SHIFT 13 #define QLOGIC_IB_I_OFFSET_MASK 0x1FFF #define QLOGIC_IB_I_OFFSET_SHIFT 0 /* K_PktFlags bits */ #define QLOGIC_IB_KPF_INTR 0x1 #define QLOGIC_IB_KPF_SUBCTXT_MASK 0x3 #define QLOGIC_IB_KPF_SUBCTXT_SHIFT 1 #define QLOGIC_IB_MAX_SUBCTXT 4 /* SendPIO per-buffer control */ #define QLOGIC_IB_SP_TEST 0x40 #define QLOGIC_IB_SP_TESTEBP 0x20 #define QLOGIC_IB_SP_TRIGGER_SHIFT 15 /* SendPIOAvail bits */ #define QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT 1 #define QLOGIC_IB_SENDPIOAVAIL_CHECK_SHIFT 0 /* qlogic_ib header format */ struct qib_header { /* * Version - 4 bits, Context - 4 bits, TID - 10 bits and Offset - * 14 bits before ECO change ~28 Dec 03. After that, Vers 4, * Context 4, TID 11, offset 13. */ __le32 ver_ctxt_tid_offset; __le16 chksum; __le16 pkt_flags; }; /* * qlogic_ib user message header format. * This structure contains the first 4 fields common to all protocols * that employ qlogic_ib. */ struct qib_message_header { __be16 lrh[4]; __be32 bth[3]; /* fields below this point are in host byte order */ struct qib_header iph; /* fields below are simplified, but should match PSM */ /* some are accessed by driver when packet spliting is needed */ __u8 sub_opcode; __u8 flags; __u16 commidx; __u32 ack_seq_num; __u8 flowid; __u8 hdr_dlen; __u16 mqhdr; __u32 uwords[4]; }; /* sequence number bits for message */ union qib_seqnum { struct { __u32 seq:11; __u32 gen:8; __u32 flow:5; }; struct { __u32 pkt:16; __u32 msg:8; }; __u32 val; }; /* qib receiving-dma tid-session-member */ struct qib_tid_session_member { __u16 tid; __u16 offset; __u16 length; }; /* IB - LRH header consts */ #define QIB_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */ #define QIB_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */ /* misc. */ #define SIZE_OF_CRC 1 #define QIB_DEFAULT_P_KEY 0xFFFF #define QIB_PSN_MASK 0xFFFFFF #define QIB_EAGER_TID_ID QLOGIC_IB_I_TID_MASK #define QIB_MULTICAST_QPN 0xFFFFFF /* Receive Header Queue: receive type (from qlogic_ib) */ #define RCVHQ_RCV_TYPE_EXPECTED 0 #define RCVHQ_RCV_TYPE_EAGER 1 #define RCVHQ_RCV_TYPE_NON_KD 2 #define RCVHQ_RCV_TYPE_ERROR 3 #define QIB_HEADER_QUEUE_WORDS 9 /* functions for extracting fields from rcvhdrq entries for the driver. */ static inline __u32 qib_hdrget_err_flags(const __le32 *rbuf) { return __le32_to_cpu(rbuf[1]) & QLOGIC_IB_RHF_H_ERR_MASK; } static inline __u32 qib_hdrget_rcv_type(const __le32 *rbuf) { return (__le32_to_cpu(rbuf[0]) >> QLOGIC_IB_RHF_RCVTYPE_SHIFT) & QLOGIC_IB_RHF_RCVTYPE_MASK; } static inline __u32 qib_hdrget_length_in_bytes(const __le32 *rbuf) { return ((__le32_to_cpu(rbuf[0]) >> QLOGIC_IB_RHF_LENGTH_SHIFT) & QLOGIC_IB_RHF_LENGTH_MASK) << 2; } static inline __u32 qib_hdrget_index(const __le32 *rbuf) { return (__le32_to_cpu(rbuf[0]) >> QLOGIC_IB_RHF_EGRINDEX_SHIFT) & QLOGIC_IB_RHF_EGRINDEX_MASK; } static inline __u32 qib_hdrget_seq(const __le32 *rbuf) { return (__le32_to_cpu(rbuf[1]) >> QLOGIC_IB_RHF_SEQ_SHIFT) & QLOGIC_IB_RHF_SEQ_MASK; } static inline __u32 qib_hdrget_offset(const __le32 *rbuf) { return (__le32_to_cpu(rbuf[1]) >> QLOGIC_IB_RHF_HDRQ_OFFSET_SHIFT) & QLOGIC_IB_RHF_HDRQ_OFFSET_MASK; } static inline __u32 qib_hdrget_use_egr_buf(const __le32 *rbuf) { return __le32_to_cpu(rbuf[0]) & QLOGIC_IB_RHF_L_USE_EGR; } static inline __u32 qib_hdrget_qib_ver(__le32 hdrword) { return (__le32_to_cpu(hdrword) >> QLOGIC_IB_I_VERS_SHIFT) & QLOGIC_IB_I_VERS_MASK; } #endif /* _QIB_COMMON_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1