| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Ralph Campbell | 14071 | 98.53% | 1 | 4.55% |
| Mike Marciniszyn | 106 | 0.74% | 8 | 36.36% |
| Kees Cook | 51 | 0.36% | 2 | 9.09% |
| Michael J. Ruhl | 19 | 0.13% | 2 | 9.09% |
| Ramkrishna Vepa | 8 | 0.06% | 1 | 4.55% |
| Kamenee Arumugame | 8 | 0.06% | 1 | 4.55% |
| Harish Chegondi | 7 | 0.05% | 1 | 4.55% |
| Geliang Tang | 6 | 0.04% | 1 | 4.55% |
| Lucas De Marchi | 2 | 0.01% | 2 | 9.09% |
| Julia Lawall | 1 | 0.01% | 1 | 4.55% |
| Masahiro Yamada | 1 | 0.01% | 1 | 4.55% |
| Vinit Agnihotri | 1 | 0.01% | 1 | 4.55% |
| Total | 14281 | 22 |
/* * Copyright (c) 2013 - 2017 Intel Corporation. All rights reserved. * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation. * All rights reserved. * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the * OpenIB.org BSD license below: * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ /* * This file contains all of the code that is specific to the * QLogic_IB 6120 PCIe chip. */ #include <linux/interrupt.h> #include <linux/pci.h> #include <linux/delay.h> #include <rdma/ib_verbs.h> #include "qib.h" #include "qib_6120_regs.h" static void qib_6120_setup_setextled(struct qib_pportdata *, u32); static void sendctrl_6120_mod(struct qib_pportdata *ppd, u32 op); static u8 qib_6120_phys_portstate(u64); static u32 qib_6120_iblink_state(u64); /* * This file contains all the chip-specific register information and * access functions for the Intel Intel_IB PCI-Express chip. * */ /* KREG_IDX uses machine-generated #defines */ #define KREG_IDX(regname) (QIB_6120_##regname##_OFFS / sizeof(u64)) /* Use defines to tie machine-generated names to lower-case names */ #define kr_extctrl KREG_IDX(EXTCtrl) #define kr_extstatus KREG_IDX(EXTStatus) #define kr_gpio_clear KREG_IDX(GPIOClear) #define kr_gpio_mask KREG_IDX(GPIOMask) #define kr_gpio_out KREG_IDX(GPIOOut) #define kr_gpio_status KREG_IDX(GPIOStatus) #define kr_rcvctrl KREG_IDX(RcvCtrl) #define kr_sendctrl KREG_IDX(SendCtrl) #define kr_partitionkey KREG_IDX(RcvPartitionKey) #define kr_hwdiagctrl KREG_IDX(HwDiagCtrl) #define kr_ibcstatus KREG_IDX(IBCStatus) #define kr_ibcctrl KREG_IDX(IBCCtrl) #define kr_sendbuffererror KREG_IDX(SendBufErr0) #define kr_rcvbthqp KREG_IDX(RcvBTHQP) #define kr_counterregbase KREG_IDX(CntrRegBase) #define kr_palign KREG_IDX(PageAlign) #define kr_rcvegrbase KREG_IDX(RcvEgrBase) #define kr_rcvegrcnt KREG_IDX(RcvEgrCnt) #define kr_rcvhdrcnt KREG_IDX(RcvHdrCnt) #define kr_rcvhdrentsize KREG_IDX(RcvHdrEntSize) #define kr_rcvhdrsize KREG_IDX(RcvHdrSize) #define kr_rcvtidbase KREG_IDX(RcvTIDBase) #define kr_rcvtidcnt KREG_IDX(RcvTIDCnt) #define kr_scratch KREG_IDX(Scratch) #define kr_sendctrl KREG_IDX(SendCtrl) #define kr_sendpioavailaddr KREG_IDX(SendPIOAvailAddr) #define kr_sendpiobufbase KREG_IDX(SendPIOBufBase) #define kr_sendpiobufcnt KREG_IDX(SendPIOBufCnt) #define kr_sendpiosize KREG_IDX(SendPIOSize) #define kr_sendregbase KREG_IDX(SendRegBase) #define kr_userregbase KREG_IDX(UserRegBase) #define kr_control KREG_IDX(Control) #define kr_intclear KREG_IDX(IntClear) #define kr_intmask KREG_IDX(IntMask) #define kr_intstatus KREG_IDX(IntStatus) #define kr_errclear KREG_IDX(ErrClear) #define kr_errmask KREG_IDX(ErrMask) #define kr_errstatus KREG_IDX(ErrStatus) #define kr_hwerrclear KREG_IDX(HwErrClear) #define kr_hwerrmask KREG_IDX(HwErrMask) #define kr_hwerrstatus KREG_IDX(HwErrStatus) #define kr_revision KREG_IDX(Revision) #define kr_portcnt KREG_IDX(PortCnt) #define kr_serdes_cfg0 KREG_IDX(SerdesCfg0) #define kr_serdes_cfg1 (kr_serdes_cfg0 + 1) #define kr_serdes_stat KREG_IDX(SerdesStat) #define kr_xgxs_cfg KREG_IDX(XGXSCfg) /* These must only be written via qib_write_kreg_ctxt() */ #define kr_rcvhdraddr KREG_IDX(RcvHdrAddr0) #define kr_rcvhdrtailaddr KREG_IDX(RcvHdrTailAddr0) #define CREG_IDX(regname) ((QIB_6120_##regname##_OFFS - \ QIB_6120_LBIntCnt_OFFS) / sizeof(u64)) #define cr_badformat CREG_IDX(RxBadFormatCnt) #define cr_erricrc CREG_IDX(RxICRCErrCnt) #define cr_errlink CREG_IDX(RxLinkProblemCnt) #define cr_errlpcrc CREG_IDX(RxLPCRCErrCnt) #define cr_errpkey CREG_IDX(RxPKeyMismatchCnt) #define cr_rcvflowctrl_err CREG_IDX(RxFlowCtrlErrCnt) #define cr_err_rlen CREG_IDX(RxLenErrCnt) #define cr_errslen CREG_IDX(TxLenErrCnt) #define cr_errtidfull CREG_IDX(RxTIDFullErrCnt) #define cr_errtidvalid CREG_IDX(RxTIDValidErrCnt) #define cr_errvcrc CREG_IDX(RxVCRCErrCnt) #define cr_ibstatuschange CREG_IDX(IBStatusChangeCnt) #define cr_lbint CREG_IDX(LBIntCnt) #define cr_invalidrlen CREG_IDX(RxMaxMinLenErrCnt) #define cr_invalidslen CREG_IDX(TxMaxMinLenErrCnt) #define cr_lbflowstall CREG_IDX(LBFlowStallCnt) #define cr_pktrcv CREG_IDX(RxDataPktCnt) #define cr_pktrcvflowctrl CREG_IDX(RxFlowPktCnt) #define cr_pktsend CREG_IDX(TxDataPktCnt) #define cr_pktsendflow CREG_IDX(TxFlowPktCnt) #define cr_portovfl CREG_IDX(RxP0HdrEgrOvflCnt) #define cr_rcvebp CREG_IDX(RxEBPCnt) #define cr_rcvovfl CREG_IDX(RxBufOvflCnt) #define cr_senddropped CREG_IDX(TxDroppedPktCnt) #define cr_sendstall CREG_IDX(TxFlowStallCnt) #define cr_sendunderrun CREG_IDX(TxUnderrunCnt) #define cr_wordrcv CREG_IDX(RxDwordCnt) #define cr_wordsend CREG_IDX(TxDwordCnt) #define cr_txunsupvl CREG_IDX(TxUnsupVLErrCnt) #define cr_rxdroppkt CREG_IDX(RxDroppedPktCnt) #define cr_iblinkerrrecov CREG_IDX(IBLinkErrRecoveryCnt) #define cr_iblinkdown CREG_IDX(IBLinkDownedCnt) #define cr_ibsymbolerr CREG_IDX(IBSymbolErrCnt) #define SYM_RMASK(regname, fldname) ((u64) \ QIB_6120_##regname##_##fldname##_RMASK) #define SYM_MASK(regname, fldname) ((u64) \ QIB_6120_##regname##_##fldname##_RMASK << \ QIB_6120_##regname##_##fldname##_LSB) #define SYM_LSB(regname, fldname) (QIB_6120_##regname##_##fldname##_LSB) #define SYM_FIELD(value, regname, fldname) ((u64) \ (((value) >> SYM_LSB(regname, fldname)) & \ SYM_RMASK(regname, fldname))) #define ERR_MASK(fldname) SYM_MASK(ErrMask, fldname##Mask) #define HWE_MASK(fldname) SYM_MASK(HwErrMask, fldname##Mask) /* link training states, from IBC */ #define IB_6120_LT_STATE_DISABLED 0x00 #define IB_6120_LT_STATE_LINKUP 0x01 #define IB_6120_LT_STATE_POLLACTIVE 0x02 #define IB_6120_LT_STATE_POLLQUIET 0x03 #define IB_6120_LT_STATE_SLEEPDELAY 0x04 #define IB_6120_LT_STATE_SLEEPQUIET 0x05 #define IB_6120_LT_STATE_CFGDEBOUNCE 0x08 #define IB_6120_LT_STATE_CFGRCVFCFG 0x09 #define IB_6120_LT_STATE_CFGWAITRMT 0x0a #define IB_6120_LT_STATE_CFGIDLE 0x0b #define IB_6120_LT_STATE_RECOVERRETRAIN 0x0c #define IB_6120_LT_STATE_RECOVERWAITRMT 0x0e #define IB_6120_LT_STATE_RECOVERIDLE 0x0f /* link state machine states from IBC */ #define IB_6120_L_STATE_DOWN 0x0 #define IB_6120_L_STATE_INIT 0x1 #define IB_6120_L_STATE_ARM 0x2 #define IB_6120_L_STATE_ACTIVE 0x3 #define IB_6120_L_STATE_ACT_DEFER 0x4 static const u8 qib_6120_physportstate[0x20] = { [IB_6120_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED, [IB_6120_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP, [IB_6120_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL, [IB_6120_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL, [IB_6120_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP, [IB_6120_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP, [IB_6120_LT_STATE_CFGDEBOUNCE] = IB_PHYSPORTSTATE_CFG_TRAIN, [IB_6120_LT_STATE_CFGRCVFCFG] = IB_PHYSPORTSTATE_CFG_TRAIN, [IB_6120_LT_STATE_CFGWAITRMT] = IB_PHYSPORTSTATE_CFG_TRAIN, [IB_6120_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_TRAIN, [IB_6120_LT_STATE_RECOVERRETRAIN] = IB_PHYSPORTSTATE_LINK_ERR_RECOVER, [IB_6120_LT_STATE_RECOVERWAITRMT] = IB_PHYSPORTSTATE_LINK_ERR_RECOVER, [IB_6120_LT_STATE_RECOVERIDLE] = IB_PHYSPORTSTATE_LINK_ERR_RECOVER, [0x10] = IB_PHYSPORTSTATE_CFG_TRAIN, [0x11] = IB_PHYSPORTSTATE_CFG_TRAIN, [0x12] = IB_PHYSPORTSTATE_CFG_TRAIN, [0x13] = IB_PHYSPORTSTATE_CFG_TRAIN, [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN, [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN, [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN, [0x17] = IB_PHYSPORTSTATE_CFG_TRAIN }; struct qib_chip_specific { u64 __iomem *cregbase; u64 *cntrs; u64 *portcntrs; void *dummy_hdrq; /* used after ctxt close */ dma_addr_t dummy_hdrq_phys; spinlock_t kernel_tid_lock; /* no back to back kernel TID writes */ spinlock_t user_tid_lock; /* no back to back user TID writes */ spinlock_t rcvmod_lock; /* protect rcvctrl shadow changes */ spinlock_t gpio_lock; /* RMW of shadows/regs for ExtCtrl and GPIO */ u64 hwerrmask; u64 errormask; u64 gpio_out; /* shadow of kr_gpio_out, for rmw ops */ u64 gpio_mask; /* shadow the gpio mask register */ u64 extctrl; /* shadow the gpio output enable, etc... */ /* * these 5 fields are used to establish deltas for IB symbol * errors and linkrecovery errors. They can be reported on * some chips during link negotiation prior to INIT, and with * DDR when faking DDR negotiations with non-IBTA switches. * The chip counters are adjusted at driver unload if there is * a non-zero delta. */ u64 ibdeltainprog; u64 ibsymdelta; u64 ibsymsnap; u64 iblnkerrdelta; u64 iblnkerrsnap; u64 ibcctrl; /* shadow for kr_ibcctrl */ u32 lastlinkrecov; /* link recovery issue */ u32 cntrnamelen; u32 portcntrnamelen; u32 ncntrs; u32 nportcntrs; /* used with gpio interrupts to implement IB counters */ u32 rxfc_unsupvl_errs; u32 overrun_thresh_errs; /* * these count only cases where _successive_ LocalLinkIntegrity * errors were seen in the receive headers of IB standard packets */ u32 lli_errs; u32 lli_counter; u64 lli_thresh; u64 sword; /* total dwords sent (sample result) */ u64 rword; /* total dwords received (sample result) */ u64 spkts; /* total packets sent (sample result) */ u64 rpkts; /* total packets received (sample result) */ u64 xmit_wait; /* # of ticks no data sent (sample result) */ struct timer_list pma_timer; struct qib_pportdata *ppd; char emsgbuf[128]; char bitsmsgbuf[64]; u8 pma_sample_status; }; /* ibcctrl bits */ #define QLOGIC_IB_IBCC_LINKINITCMD_DISABLE 1 /* cycle through TS1/TS2 till OK */ #define QLOGIC_IB_IBCC_LINKINITCMD_POLL 2 /* wait for TS1, then go on */ #define QLOGIC_IB_IBCC_LINKINITCMD_SLEEP 3 #define QLOGIC_IB_IBCC_LINKINITCMD_SHIFT 16 #define QLOGIC_IB_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */ #define QLOGIC_IB_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */ #define QLOGIC_IB_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */ #define QLOGIC_IB_IBCC_LINKCMD_SHIFT 18 /* * We could have a single register get/put routine, that takes a group type, * but this is somewhat clearer and cleaner. It also gives us some error * checking. 64 bit register reads should always work, but are inefficient * on opteron (the northbridge always generates 2 separate HT 32 bit reads), * so we use kreg32 wherever possible. User register and counter register * reads are always 32 bit reads, so only one form of those routines. */ /** * qib_read_ureg32 - read 32-bit virtualized per-context register * @dd: device * @regno: register number * @ctxt: context number * * Return the contents of a register that is virtualized to be per context. * Returns -1 on errors (not distinguishable from valid contents at * runtime; we may add a separate error variable at some point). */ static inline u32 qib_read_ureg32(const struct qib_devdata *dd, enum qib_ureg regno, int ctxt) { if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) return 0; if (dd->userbase) return readl(regno + (u64 __iomem *) ((char __iomem *)dd->userbase + dd->ureg_align * ctxt)); else return readl(regno + (u64 __iomem *) (dd->uregbase + (char __iomem *)dd->kregbase + dd->ureg_align * ctxt)); } /** * qib_write_ureg - write 32-bit virtualized per-context register * @dd: device * @regno: register number * @value: value * @ctxt: context * * Write the contents of a register that is virtualized to be per context. */ static inline void qib_write_ureg(const struct qib_devdata *dd, enum qib_ureg regno, u64 value, int ctxt) { u64 __iomem *ubase; if (dd->userbase) ubase = (u64 __iomem *) ((char __iomem *) dd->userbase + dd->ureg_align * ctxt); else ubase = (u64 __iomem *) (dd->uregbase + (char __iomem *) dd->kregbase + dd->ureg_align * ctxt); if (dd->kregbase && (dd->flags & QIB_PRESENT)) writeq(value, &ubase[regno]); } static inline u32 qib_read_kreg32(const struct qib_devdata *dd, const u16 regno) { if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) return -1; return readl((u32 __iomem *)&dd->kregbase[regno]); } static inline u64 qib_read_kreg64(const struct qib_devdata *dd, const u16 regno) { if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) return -1; return readq(&dd->kregbase[regno]); } static inline void qib_write_kreg(const struct qib_devdata *dd, const u16 regno, u64 value) { if (dd->kregbase && (dd->flags & QIB_PRESENT)) writeq(value, &dd->kregbase[regno]); } /** * qib_write_kreg_ctxt - write a device's per-ctxt 64-bit kernel register * @dd: the qlogic_ib device * @regno: the register number to write * @ctxt: the context containing the register * @value: the value to write */ static inline void qib_write_kreg_ctxt(const struct qib_devdata *dd, const u16 regno, unsigned ctxt, u64 value) { qib_write_kreg(dd, regno + ctxt, value); } static inline void write_6120_creg(const struct qib_devdata *dd, u16 regno, u64 value) { if (dd->cspec->cregbase && (dd->flags & QIB_PRESENT)) writeq(value, &dd->cspec->cregbase[regno]); } static inline u64 read_6120_creg(const struct qib_devdata *dd, u16 regno) { if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) return 0; return readq(&dd->cspec->cregbase[regno]); } static inline u32 read_6120_creg32(const struct qib_devdata *dd, u16 regno) { if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) return 0; return readl(&dd->cspec->cregbase[regno]); } /* kr_control bits */ #define QLOGIC_IB_C_RESET 1U /* kr_intstatus, kr_intclear, kr_intmask bits */ #define QLOGIC_IB_I_RCVURG_MASK ((1U << 5) - 1) #define QLOGIC_IB_I_RCVURG_SHIFT 0 #define QLOGIC_IB_I_RCVAVAIL_MASK ((1U << 5) - 1) #define QLOGIC_IB_I_RCVAVAIL_SHIFT 12 #define QLOGIC_IB_C_FREEZEMODE 0x00000002 #define QLOGIC_IB_C_LINKENABLE 0x00000004 #define QLOGIC_IB_I_ERROR 0x0000000080000000ULL #define QLOGIC_IB_I_SPIOSENT 0x0000000040000000ULL #define QLOGIC_IB_I_SPIOBUFAVAIL 0x0000000020000000ULL #define QLOGIC_IB_I_GPIO 0x0000000010000000ULL #define QLOGIC_IB_I_BITSEXTANT \ ((QLOGIC_IB_I_RCVURG_MASK << QLOGIC_IB_I_RCVURG_SHIFT) | \ (QLOGIC_IB_I_RCVAVAIL_MASK << \ QLOGIC_IB_I_RCVAVAIL_SHIFT) | \ QLOGIC_IB_I_ERROR | QLOGIC_IB_I_SPIOSENT | \ QLOGIC_IB_I_SPIOBUFAVAIL | QLOGIC_IB_I_GPIO) /* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */ #define QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK 0x000000000000003fULL #define QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT 0 #define QLOGIC_IB_HWE_PCIEPOISONEDTLP 0x0000000010000000ULL #define QLOGIC_IB_HWE_PCIECPLTIMEOUT 0x0000000020000000ULL #define QLOGIC_IB_HWE_PCIEBUSPARITYXTLH 0x0000000040000000ULL #define QLOGIC_IB_HWE_PCIEBUSPARITYXADM 0x0000000080000000ULL #define QLOGIC_IB_HWE_PCIEBUSPARITYRADM 0x0000000100000000ULL #define QLOGIC_IB_HWE_COREPLL_FBSLIP 0x0080000000000000ULL #define QLOGIC_IB_HWE_COREPLL_RFSLIP 0x0100000000000000ULL #define QLOGIC_IB_HWE_PCIE1PLLFAILED 0x0400000000000000ULL #define QLOGIC_IB_HWE_PCIE0PLLFAILED 0x0800000000000000ULL #define QLOGIC_IB_HWE_SERDESPLLFAILED 0x1000000000000000ULL /* kr_extstatus bits */ #define QLOGIC_IB_EXTS_FREQSEL 0x2 #define QLOGIC_IB_EXTS_SERDESSEL 0x4 #define QLOGIC_IB_EXTS_MEMBIST_ENDTEST 0x0000000000004000 #define QLOGIC_IB_EXTS_MEMBIST_FOUND 0x0000000000008000 /* kr_xgxsconfig bits */ #define QLOGIC_IB_XGXS_RESET 0x5ULL #define _QIB_GPIO_SDA_NUM 1 #define _QIB_GPIO_SCL_NUM 0 /* Bits in GPIO for the added IB link interrupts */ #define GPIO_RXUVL_BIT 3 #define GPIO_OVRUN_BIT 4 #define GPIO_LLI_BIT 5 #define GPIO_ERRINTR_MASK 0x38 #define QLOGIC_IB_RT_BUFSIZE_MASK 0xe0000000ULL #define QLOGIC_IB_RT_BUFSIZE_SHIFTVAL(tid) \ ((((tid) & QLOGIC_IB_RT_BUFSIZE_MASK) >> 29) + 11 - 1) #define QLOGIC_IB_RT_BUFSIZE(tid) (1 << QLOGIC_IB_RT_BUFSIZE_SHIFTVAL(tid)) #define QLOGIC_IB_RT_IS_VALID(tid) \ (((tid) & QLOGIC_IB_RT_BUFSIZE_MASK) && \ ((((tid) & QLOGIC_IB_RT_BUFSIZE_MASK) != QLOGIC_IB_RT_BUFSIZE_MASK))) #define QLOGIC_IB_RT_ADDR_MASK 0x1FFFFFFFULL /* 29 bits valid */ #define QLOGIC_IB_RT_ADDR_SHIFT 10 #define QLOGIC_IB_R_INTRAVAIL_SHIFT 16 #define QLOGIC_IB_R_TAILUPD_SHIFT 31 #define IBA6120_R_PKEY_DIS_SHIFT 30 #define PBC_6120_VL15_SEND_CTRL (1ULL << 31) /* pbc; VL15; link_buf only */ #define IBCBUSFRSPCPARITYERR HWE_MASK(IBCBusFromSPCParityErr) #define IBCBUSTOSPCPARITYERR HWE_MASK(IBCBusToSPCParityErr) #define SYM_MASK_BIT(regname, fldname, bit) ((u64) \ ((1ULL << (SYM_LSB(regname, fldname) + (bit))))) #define TXEMEMPARITYERR_PIOBUF \ SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 0) #define TXEMEMPARITYERR_PIOPBC \ SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 1) #define TXEMEMPARITYERR_PIOLAUNCHFIFO \ SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 2) #define RXEMEMPARITYERR_RCVBUF \ SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 0) #define RXEMEMPARITYERR_LOOKUPQ \ SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 1) #define RXEMEMPARITYERR_EXPTID \ SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 2) #define RXEMEMPARITYERR_EAGERTID \ SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 3) #define RXEMEMPARITYERR_FLAGBUF \ SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 4) #define RXEMEMPARITYERR_DATAINFO \ SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 5) #define RXEMEMPARITYERR_HDRINFO \ SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 6) /* 6120 specific hardware errors... */ static const struct qib_hwerror_msgs qib_6120_hwerror_msgs[] = { /* generic hardware errors */ QLOGIC_IB_HWE_MSG(IBCBUSFRSPCPARITYERR, "QIB2IB Parity"), QLOGIC_IB_HWE_MSG(IBCBUSTOSPCPARITYERR, "IB2QIB Parity"), QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOBUF, "TXE PIOBUF Memory Parity"), QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOPBC, "TXE PIOPBC Memory Parity"), QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOLAUNCHFIFO, "TXE PIOLAUNCHFIFO Memory Parity"), QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_RCVBUF, "RXE RCVBUF Memory Parity"), QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_LOOKUPQ, "RXE LOOKUPQ Memory Parity"), QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_EAGERTID, "RXE EAGERTID Memory Parity"), QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_EXPTID, "RXE EXPTID Memory Parity"), QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_FLAGBUF, "RXE FLAGBUF Memory Parity"), QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_DATAINFO, "RXE DATAINFO Memory Parity"), QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_HDRINFO, "RXE HDRINFO Memory Parity"), /* chip-specific hardware errors */ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEPOISONEDTLP, "PCIe Poisoned TLP"), QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIECPLTIMEOUT, "PCIe completion timeout"), /* * In practice, it's unlikely wthat we'll see PCIe PLL, or bus * parity or memory parity error failures, because most likely we * won't be able to talk to the core of the chip. Nonetheless, we * might see them, if they are in parts of the PCIe core that aren't * essential. */ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE1PLLFAILED, "PCIePLL1"), QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE0PLLFAILED, "PCIePLL0"), QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYXTLH, "PCIe XTLH core parity"), QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYXADM, "PCIe ADM TX core parity"), QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYRADM, "PCIe ADM RX core parity"), QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_SERDESPLLFAILED, "SerDes PLL"), }; #define TXE_PIO_PARITY (TXEMEMPARITYERR_PIOBUF | TXEMEMPARITYERR_PIOPBC) #define _QIB_PLL_FAIL (QLOGIC_IB_HWE_COREPLL_FBSLIP | \ QLOGIC_IB_HWE_COREPLL_RFSLIP) /* variables for sanity checking interrupt and errors */ #define IB_HWE_BITSEXTANT \ (HWE_MASK(RXEMemParityErr) | \ HWE_MASK(TXEMemParityErr) | \ (QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK << \ QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT) | \ QLOGIC_IB_HWE_PCIE1PLLFAILED | \ QLOGIC_IB_HWE_PCIE0PLLFAILED | \ QLOGIC_IB_HWE_PCIEPOISONEDTLP | \ QLOGIC_IB_HWE_PCIECPLTIMEOUT | \ QLOGIC_IB_HWE_PCIEBUSPARITYXTLH | \ QLOGIC_IB_HWE_PCIEBUSPARITYXADM | \ QLOGIC_IB_HWE_PCIEBUSPARITYRADM | \ HWE_MASK(PowerOnBISTFailed) | \ QLOGIC_IB_HWE_COREPLL_FBSLIP | \ QLOGIC_IB_HWE_COREPLL_RFSLIP | \ QLOGIC_IB_HWE_SERDESPLLFAILED | \ HWE_MASK(IBCBusToSPCParityErr) | \ HWE_MASK(IBCBusFromSPCParityErr)) #define IB_E_BITSEXTANT \ (ERR_MASK(RcvFormatErr) | ERR_MASK(RcvVCRCErr) | \ ERR_MASK(RcvICRCErr) | ERR_MASK(RcvMinPktLenErr) | \ ERR_MASK(RcvMaxPktLenErr) | ERR_MASK(RcvLongPktLenErr) | \ ERR_MASK(RcvShortPktLenErr) | ERR_MASK(RcvUnexpectedCharErr) | \ ERR_MASK(RcvUnsupportedVLErr) | ERR_MASK(RcvEBPErr) | \ ERR_MASK(RcvIBFlowErr) | ERR_MASK(RcvBadVersionErr) | \ ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr) | \ ERR_MASK(RcvBadTidErr) | ERR_MASK(RcvHdrLenErr) | \ ERR_MASK(RcvHdrErr) | ERR_MASK(RcvIBLostLinkErr) | \ ERR_MASK(SendMinPktLenErr) | ERR_MASK(SendMaxPktLenErr) | \ ERR_MASK(SendUnderRunErr) | ERR_MASK(SendPktLenErr) | \ ERR_MASK(SendDroppedSmpPktErr) | \ ERR_MASK(SendDroppedDataPktErr) | \ ERR_MASK(SendPioArmLaunchErr) | \ ERR_MASK(SendUnexpectedPktNumErr) | \ ERR_MASK(SendUnsupportedVLErr) | ERR_MASK(IBStatusChanged) | \ ERR_MASK(InvalidAddrErr) | ERR_MASK(ResetNegated) | \ ERR_MASK(HardwareErr)) #define QLOGIC_IB_E_PKTERRS ( \ ERR_MASK(SendPktLenErr) | \ ERR_MASK(SendDroppedDataPktErr) | \ ERR_MASK(RcvVCRCErr) | \ ERR_MASK(RcvICRCErr) | \ ERR_MASK(RcvShortPktLenErr) | \ ERR_MASK(RcvEBPErr)) /* These are all rcv-related errors which we want to count for stats */ #define E_SUM_PKTERRS \ (ERR_MASK(RcvHdrLenErr) | ERR_MASK(RcvBadTidErr) | \ ERR_MASK(RcvBadVersionErr) | ERR_MASK(RcvHdrErr) | \ ERR_MASK(RcvLongPktLenErr) | ERR_MASK(RcvShortPktLenErr) | \ ERR_MASK(RcvMaxPktLenErr) | ERR_MASK(RcvMinPktLenErr) | \ ERR_MASK(RcvFormatErr) | ERR_MASK(RcvUnsupportedVLErr) | \ ERR_MASK(RcvUnexpectedCharErr) | ERR_MASK(RcvEBPErr)) /* These are all send-related errors which we want to count for stats */ #define E_SUM_ERRS \ (ERR_MASK(SendPioArmLaunchErr) | \ ERR_MASK(SendUnexpectedPktNumErr) | \ ERR_MASK(SendDroppedDataPktErr) | \ ERR_MASK(SendDroppedSmpPktErr) | \ ERR_MASK(SendMaxPktLenErr) | ERR_MASK(SendUnsupportedVLErr) | \ ERR_MASK(SendMinPktLenErr) | ERR_MASK(SendPktLenErr) | \ ERR_MASK(InvalidAddrErr)) /* * this is similar to E_SUM_ERRS, but can't ignore armlaunch, don't ignore * errors not related to freeze and cancelling buffers. Can't ignore * armlaunch because could get more while still cleaning up, and need * to cancel those as they happen. */ #define E_SPKT_ERRS_IGNORE \ (ERR_MASK(SendDroppedDataPktErr) | \ ERR_MASK(SendDroppedSmpPktErr) | \ ERR_MASK(SendMaxPktLenErr) | ERR_MASK(SendMinPktLenErr) | \ ERR_MASK(SendPktLenErr)) /* * these are errors that can occur when the link changes state while * a packet is being sent or received. This doesn't cover things * like EBP or VCRC that can be the result of a sending having the * link change state, so we receive a "known bad" packet. */ #define E_SUM_LINK_PKTERRS \ (ERR_MASK(SendDroppedDataPktErr) | \ ERR_MASK(SendDroppedSmpPktErr) | \ ERR_MASK(SendMinPktLenErr) | ERR_MASK(SendPktLenErr) | \ ERR_MASK(RcvShortPktLenErr) | ERR_MASK(RcvMinPktLenErr) | \ ERR_MASK(RcvUnexpectedCharErr)) static void qib_6120_put_tid_2(struct qib_devdata *, u64 __iomem *, u32, unsigned long); /* * On platforms using this chip, and not having ordered WC stores, we * can get TXE parity errors due to speculative reads to the PIO buffers, * and this, due to a chip issue can result in (many) false parity error * reports. So it's a debug print on those, and an info print on systems * where the speculative reads don't occur. */ static void qib_6120_txe_recover(struct qib_devdata *dd) { if (!qib_unordered_wc()) qib_devinfo(dd->pcidev, "Recovering from TXE PIO parity error\n"); } /* enable/disable chip from delivering interrupts */ static void qib_6120_set_intr_state(struct qib_devdata *dd, u32 enable) { if (enable) { if (dd->flags & QIB_BADINTR) return; qib_write_kreg(dd, kr_intmask, ~0ULL); /* force re-interrupt of any pending interrupts. */ qib_write_kreg(dd, kr_intclear, 0ULL); } else qib_write_kreg(dd, kr_intmask, 0ULL); } /* * Try to cleanup as much as possible for anything that might have gone * wrong while in freeze mode, such as pio buffers being written by user * processes (causing armlaunch), send errors due to going into freeze mode, * etc., and try to avoid causing extra interrupts while doing so. * Forcibly update the in-memory pioavail register copies after cleanup * because the chip won't do it while in freeze mode (the register values * themselves are kept correct). * Make sure that we don't lose any important interrupts by using the chip * feature that says that writing 0 to a bit in *clear that is set in * *status will cause an interrupt to be generated again (if allowed by * the *mask value). * This is in chip-specific code because of all of the register accesses, * even though the details are similar on most chips */ static void qib_6120_clear_freeze(struct qib_devdata *dd) { /* disable error interrupts, to avoid confusion */ qib_write_kreg(dd, kr_errmask, 0ULL); /* also disable interrupts; errormask is sometimes overwritten */ qib_6120_set_intr_state(dd, 0); qib_cancel_sends(dd->pport); /* clear the freeze, and be sure chip saw it */ qib_write_kreg(dd, kr_control, dd->control); qib_read_kreg32(dd, kr_scratch); /* force in-memory update now we are out of freeze */ qib_force_pio_avail_update(dd); /* * force new interrupt if any hwerr, error or interrupt bits are * still set, and clear "safe" send packet errors related to freeze * and cancelling sends. Re-enable error interrupts before possible * force of re-interrupt on pending interrupts. */ qib_write_kreg(dd, kr_hwerrclear, 0ULL); qib_write_kreg(dd, kr_errclear, E_SPKT_ERRS_IGNORE); qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); qib_6120_set_intr_state(dd, 1); } /** * qib_handle_6120_hwerrors - display hardware errors. * @dd: the qlogic_ib device * @msg: the output buffer * @msgl: the size of the output buffer * * Use same msg buffer as regular errors to avoid excessive stack * use. Most hardware errors are catastrophic, but for right now, * we'll print them and continue. Reuse the same message buffer as * handle_6120_errors() to avoid excessive stack usage. */ static void qib_handle_6120_hwerrors(struct qib_devdata *dd, char *msg, size_t msgl) { u64 hwerrs; u32 bits, ctrl; int isfatal = 0; char *bitsmsg; hwerrs = qib_read_kreg64(dd, kr_hwerrstatus); if (!hwerrs) return; if (hwerrs == ~0ULL) { qib_dev_err(dd, "Read of hardware error status failed (all bits set); ignoring\n"); return; } qib_stats.sps_hwerrs++; /* Always clear the error status register, except MEMBISTFAIL, * regardless of whether we continue or stop using the chip. * We want that set so we know it failed, even across driver reload. * We'll still ignore it in the hwerrmask. We do this partly for * diagnostics, but also for support */ qib_write_kreg(dd, kr_hwerrclear, hwerrs & ~HWE_MASK(PowerOnBISTFailed)); hwerrs &= dd->cspec->hwerrmask; /* * Make sure we get this much out, unless told to be quiet, * or it's occurred within the last 5 seconds. */ if (hwerrs & ~(TXE_PIO_PARITY | RXEMEMPARITYERR_EAGERTID)) qib_devinfo(dd->pcidev, "Hardware error: hwerr=0x%llx (cleared)\n", (unsigned long long) hwerrs); if (hwerrs & ~IB_HWE_BITSEXTANT) qib_dev_err(dd, "hwerror interrupt with unknown errors %llx set\n", (unsigned long long)(hwerrs & ~IB_HWE_BITSEXTANT)); ctrl = qib_read_kreg32(dd, kr_control); if ((ctrl & QLOGIC_IB_C_FREEZEMODE) && !dd->diag_client) { /* * Parity errors in send memory are recoverable, * just cancel the send (if indicated in * sendbuffererror), * count the occurrence, unfreeze (if no other handled * hardware error bits are set), and continue. They can * occur if a processor speculative read is done to the PIO * buffer while we are sending a packet, for example. */ if (hwerrs & TXE_PIO_PARITY) { qib_6120_txe_recover(dd); hwerrs &= ~TXE_PIO_PARITY; } if (!hwerrs) { static u32 freeze_cnt; freeze_cnt++; qib_6120_clear_freeze(dd); } else isfatal = 1; } *msg = '\0'; if (hwerrs & HWE_MASK(PowerOnBISTFailed)) { isfatal = 1; strlcat(msg, "[Memory BIST test failed, InfiniPath hardware unusable]", msgl); /* ignore from now on, so disable until driver reloaded */ dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed); qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); } qib_format_hwerrors(hwerrs, qib_6120_hwerror_msgs, ARRAY_SIZE(qib_6120_hwerror_msgs), msg, msgl); bitsmsg = dd->cspec->bitsmsgbuf; if (hwerrs & (QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK << QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT)) { bits = (u32) ((hwerrs >> QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT) & QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK); snprintf(bitsmsg, sizeof(dd->cspec->bitsmsgbuf), "[PCIe Mem Parity Errs %x] ", bits); strlcat(msg, bitsmsg, msgl); } if (hwerrs & _QIB_PLL_FAIL) { isfatal = 1; snprintf(bitsmsg, sizeof(dd->cspec->bitsmsgbuf), "[PLL failed (%llx), InfiniPath hardware unusable]", (unsigned long long) hwerrs & _QIB_PLL_FAIL); strlcat(msg, bitsmsg, msgl); /* ignore from now on, so disable until driver reloaded */ dd->cspec->hwerrmask &= ~(hwerrs & _QIB_PLL_FAIL); qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); } if (hwerrs & QLOGIC_IB_HWE_SERDESPLLFAILED) { /* * If it occurs, it is left masked since the external * interface is unused */ dd->cspec->hwerrmask &= ~QLOGIC_IB_HWE_SERDESPLLFAILED; qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); } if (hwerrs) /* * if any set that we aren't ignoring; only * make the complaint once, in case it's stuck * or recurring, and we get here multiple * times. */ qib_dev_err(dd, "%s hardware error\n", msg); else *msg = 0; /* recovered from all of them */ if (isfatal && !dd->diag_client) { qib_dev_err(dd, "Fatal Hardware Error, no longer usable, SN %.16s\n", dd->serial); /* * for /sys status file and user programs to print; if no * trailing brace is copied, we'll know it was truncated. */ if (dd->freezemsg) snprintf(dd->freezemsg, dd->freezelen, "{%s}", msg); qib_disable_after_error(dd); } } /* * Decode the error status into strings, deciding whether to always * print * it or not depending on "normal packet errors" vs everything * else. Return 1 if "real" errors, otherwise 0 if only packet * errors, so caller can decide what to print with the string. */ static int qib_decode_6120_err(struct qib_devdata *dd, char *buf, size_t blen, u64 err) { int iserr = 1; *buf = '\0'; if (err & QLOGIC_IB_E_PKTERRS) { if (!(err & ~QLOGIC_IB_E_PKTERRS)) iserr = 0; if ((err & ERR_MASK(RcvICRCErr)) && !(err&(ERR_MASK(RcvVCRCErr)|ERR_MASK(RcvEBPErr)))) strlcat(buf, "CRC ", blen); if (!iserr) goto done; } if (err & ERR_MASK(RcvHdrLenErr)) strlcat(buf, "rhdrlen ", blen); if (err & ERR_MASK(RcvBadTidErr)) strlcat(buf, "rbadtid ", blen); if (err & ERR_MASK(RcvBadVersionErr)) strlcat(buf, "rbadversion ", blen); if (err & ERR_MASK(RcvHdrErr)) strlcat(buf, "rhdr ", blen); if (err & ERR_MASK(RcvLongPktLenErr)) strlcat(buf, "rlongpktlen ", blen); if (err & ERR_MASK(RcvMaxPktLenErr)) strlcat(buf, "rmaxpktlen ", blen); if (err & ERR_MASK(RcvMinPktLenErr)) strlcat(buf, "rminpktlen ", blen); if (err & ERR_MASK(SendMinPktLenErr)) strlcat(buf, "sminpktlen ", blen); if (err & ERR_MASK(RcvFormatErr)) strlcat(buf, "rformaterr ", blen); if (err & ERR_MASK(RcvUnsupportedVLErr)) strlcat(buf, "runsupvl ", blen); if (err & ERR_MASK(RcvUnexpectedCharErr)) strlcat(buf, "runexpchar ", blen); if (err & ERR_MASK(RcvIBFlowErr)) strlcat(buf, "ribflow ", blen); if (err & ERR_MASK(SendUnderRunErr)) strlcat(buf, "sunderrun ", blen); if (err & ERR_MASK(SendPioArmLaunchErr)) strlcat(buf, "spioarmlaunch ", blen); if (err & ERR_MASK(SendUnexpectedPktNumErr)) strlcat(buf, "sunexperrpktnum ", blen); if (err & ERR_MASK(SendDroppedSmpPktErr)) strlcat(buf, "sdroppedsmppkt ", blen); if (err & ERR_MASK(SendMaxPktLenErr)) strlcat(buf, "smaxpktlen ", blen); if (err & ERR_MASK(SendUnsupportedVLErr)) strlcat(buf, "sunsupVL ", blen); if (err & ERR_MASK(InvalidAddrErr)) strlcat(buf, "invalidaddr ", blen); if (err & ERR_MASK(RcvEgrFullErr)) strlcat(buf, "rcvegrfull ", blen); if (err & ERR_MASK(RcvHdrFullErr)) strlcat(buf, "rcvhdrfull ", blen); if (err & ERR_MASK(IBStatusChanged)) strlcat(buf, "ibcstatuschg ", blen); if (err & ERR_MASK(RcvIBLostLinkErr)) strlcat(buf, "riblostlink ", blen); if (err & ERR_MASK(HardwareErr)) strlcat(buf, "hardware ", blen); if (err & ERR_MASK(ResetNegated)) strlcat(buf, "reset ", blen); done: return iserr; } /* * Called when we might have an error that is specific to a particular * PIO buffer, and may need to cancel that buffer, so it can be re-used. */ static void qib_disarm_6120_senderrbufs(struct qib_pportdata *ppd) { unsigned long sbuf[2]; struct qib_devdata *dd = ppd->dd; /* * It's possible that sendbuffererror could have bits set; might * have already done this as a result of hardware error handling. */ sbuf[0] = qib_read_kreg64(dd, kr_sendbuffererror); sbuf[1] = qib_read_kreg64(dd, kr_sendbuffererror + 1); if (sbuf[0] || sbuf[1]) qib_disarm_piobufs_set(dd, sbuf, dd->piobcnt2k + dd->piobcnt4k); } static int chk_6120_linkrecovery(struct qib_devdata *dd, u64 ibcs) { int ret = 1; u32 ibstate = qib_6120_iblink_state(ibcs); u32 linkrecov = read_6120_creg32(dd, cr_iblinkerrrecov); if (linkrecov != dd->cspec->lastlinkrecov) { /* and no more until active again */ dd->cspec->lastlinkrecov = 0; qib_set_linkstate(dd->pport, QIB_IB_LINKDOWN); ret = 0; } if (ibstate == IB_PORT_ACTIVE) dd->cspec->lastlinkrecov = read_6120_creg32(dd, cr_iblinkerrrecov); return ret; } static void handle_6120_errors(struct qib_devdata *dd, u64 errs) { char *msg; u64 ignore_this_time = 0; u64 iserr = 0; struct qib_pportdata *ppd = dd->pport; u64 mask; /* don't report errors that are masked */ errs &= dd->cspec->errormask; msg = dd->cspec->emsgbuf; /* do these first, they are most important */ if (errs & ERR_MASK(HardwareErr)) qib_handle_6120_hwerrors(dd, msg, sizeof(dd->cspec->emsgbuf)); if (errs & ~IB_E_BITSEXTANT) qib_dev_err(dd, "error interrupt with unknown errors %llx set\n", (unsigned long long) (errs & ~IB_E_BITSEXTANT)); if (errs & E_SUM_ERRS) { qib_disarm_6120_senderrbufs(ppd); if ((errs & E_SUM_LINK_PKTERRS) && !(ppd->lflags & QIBL_LINKACTIVE)) { /* * This can happen when trying to bring the link * up, but the IB link changes state at the "wrong" * time. The IB logic then complains that the packet * isn't valid. We don't want to confuse people, so * we just don't print them, except at debug */ ignore_this_time = errs & E_SUM_LINK_PKTERRS; } } else if ((errs & E_SUM_LINK_PKTERRS) && !(ppd->lflags & QIBL_LINKACTIVE)) { /* * This can happen when SMA is trying to bring the link * up, but the IB link changes state at the "wrong" time. * The IB logic then complains that the packet isn't * valid. We don't want to confuse people, so we just * don't print them, except at debug */ ignore_this_time = errs & E_SUM_LINK_PKTERRS; } qib_write_kreg(dd, kr_errclear, errs); errs &= ~ignore_this_time; if (!errs) goto done; /* * The ones we mask off are handled specially below * or above. */ mask = ERR_MASK(IBStatusChanged) | ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr) | ERR_MASK(HardwareErr); qib_decode_6120_err(dd, msg, sizeof(dd->cspec->emsgbuf), errs & ~mask); if (errs & E_SUM_PKTERRS) qib_stats.sps_rcverrs++; if (errs & E_SUM_ERRS) qib_stats.sps_txerrs++; iserr = errs & ~(E_SUM_PKTERRS | QLOGIC_IB_E_PKTERRS); if (errs & ERR_MASK(IBStatusChanged)) { u64 ibcs = qib_read_kreg64(dd, kr_ibcstatus); u32 ibstate = qib_6120_iblink_state(ibcs); int handle = 1; if (ibstate != IB_PORT_INIT && dd->cspec->lastlinkrecov) handle = chk_6120_linkrecovery(dd, ibcs); /* * Since going into a recovery state causes the link state * to go down and since recovery is transitory, it is better * if we "miss" ever seeing the link training state go into * recovery (i.e., ignore this transition for link state * special handling purposes) without updating lastibcstat. */ if (handle && qib_6120_phys_portstate(ibcs) == IB_PHYSPORTSTATE_LINK_ERR_RECOVER) handle = 0; if (handle) qib_handle_e_ibstatuschanged(ppd, ibcs); } if (errs & ERR_MASK(ResetNegated)) { qib_dev_err(dd, "Got reset, requires re-init (unload and reload driver)\n"); dd->flags &= ~QIB_INITTED; /* needs re-init */ /* mark as having had error */ *dd->devstatusp |= QIB_STATUS_HWERROR; *dd->pport->statusp &= ~QIB_STATUS_IB_CONF; } if (*msg && iserr) qib_dev_porterr(dd, ppd->port, "%s error\n", msg); if (ppd->state_wanted & ppd->lflags) wake_up_interruptible(&ppd->state_wait); /* * If there were hdrq or egrfull errors, wake up any processes * waiting in poll. We used to try to check which contexts had * the overflow, but given the cost of that and the chip reads * to support it, it's better to just wake everybody up if we * get an overflow; waiters can poll again if it's not them. */ if (errs & (ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr))) { qib_handle_urcv(dd, ~0U); if (errs & ERR_MASK(RcvEgrFullErr)) qib_stats.sps_buffull++; else qib_stats.sps_hdrfull++; } done: return; } /** * qib_6120_init_hwerrors - enable hardware errors * @dd: the qlogic_ib device * * now that we have finished initializing everything that might reasonably * cause a hardware error, and cleared those errors bits as they occur, * we can enable hardware errors in the mask (potentially enabling * freeze mode), and enable hardware errors as errors (along with * everything else) in errormask */ static void qib_6120_init_hwerrors(struct qib_devdata *dd) { u64 val; u64 extsval; extsval = qib_read_kreg64(dd, kr_extstatus); if (!(extsval & QLOGIC_IB_EXTS_MEMBIST_ENDTEST)) qib_dev_err(dd, "MemBIST did not complete!\n"); /* init so all hwerrors interrupt, and enter freeze, ajdust below */ val = ~0ULL; if (dd->minrev < 2) { /* * Avoid problem with internal interface bus parity * checking. Fixed in Rev2. */ val &= ~QLOGIC_IB_HWE_PCIEBUSPARITYRADM; } /* avoid some intel cpu's speculative read freeze mode issue */ val &= ~TXEMEMPARITYERR_PIOBUF; dd->cspec->hwerrmask = val; qib_write_kreg(dd, kr_hwerrclear, ~HWE_MASK(PowerOnBISTFailed)); qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); /* clear all */ qib_write_kreg(dd, kr_errclear, ~0ULL); /* enable errors that are masked, at least this first time. */ qib_write_kreg(dd, kr_errmask, ~0ULL); dd->cspec->errormask = qib_read_kreg64(dd, kr_errmask); /* clear any interrupts up to this point (ints still not enabled) */ qib_write_kreg(dd, kr_intclear, ~0ULL); qib_write_kreg(dd, kr_rcvbthqp, dd->qpn_mask << (QIB_6120_RcvBTHQP_BTHQP_Mask_LSB - 1) | QIB_KD_QP); } /* * Disable and enable the armlaunch error. Used for PIO bandwidth testing * on chips that are count-based, rather than trigger-based. There is no * reference counting, but that's also fine, given the intended use. * Only chip-specific because it's all register accesses */ static void qib_set_6120_armlaunch(struct qib_devdata *dd, u32 enable) { if (enable) { qib_write_kreg(dd, kr_errclear, ERR_MASK(SendPioArmLaunchErr)); dd->cspec->errormask |= ERR_MASK(SendPioArmLaunchErr); } else dd->cspec->errormask &= ~ERR_MASK(SendPioArmLaunchErr); qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); } /* * Formerly took parameter <which> in pre-shifted, * pre-merged form with LinkCmd and LinkInitCmd * together, and assuming the zero was NOP. */ static void qib_set_ib_6120_lstate(struct qib_pportdata *ppd, u16 linkcmd, u16 linitcmd) { u64 mod_wd; struct qib_devdata *dd = ppd->dd; unsigned long flags; if (linitcmd == QLOGIC_IB_IBCC_LINKINITCMD_DISABLE) { /* * If we are told to disable, note that so link-recovery * code does not attempt to bring us back up. */ spin_lock_irqsave(&ppd->lflags_lock, flags); ppd->lflags |= QIBL_IB_LINK_DISABLED; spin_unlock_irqrestore(&ppd->lflags_lock, flags); } else if (linitcmd || linkcmd == QLOGIC_IB_IBCC_LINKCMD_DOWN) { /* * Any other linkinitcmd will lead to LINKDOWN and then * to INIT (if all is well), so clear flag to let * link-recovery code attempt to bring us back up. */ spin_lock_irqsave(&ppd->lflags_lock, flags); ppd->lflags &= ~QIBL_IB_LINK_DISABLED; spin_unlock_irqrestore(&ppd->lflags_lock, flags); } mod_wd = (linkcmd << QLOGIC_IB_IBCC_LINKCMD_SHIFT) | (linitcmd << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl | mod_wd); /* write to chip to prevent back-to-back writes of control reg */ qib_write_kreg(dd, kr_scratch, 0); } /** * qib_6120_bringup_serdes - bring up the serdes * @dd: the qlogic_ib device */ static int qib_6120_bringup_serdes(struct qib_pportdata *ppd) { struct qib_devdata *dd = ppd->dd; u64 val, config1, prev_val, hwstat, ibc; /* Put IBC in reset, sends disabled */ dd->control &= ~QLOGIC_IB_C_LINKENABLE; qib_write_kreg(dd, kr_control, 0ULL); dd->cspec->ibdeltainprog = 1; dd->cspec->ibsymsnap = read_6120_creg32(dd, cr_ibsymbolerr); dd->cspec->iblnkerrsnap = read_6120_creg32(dd, cr_iblinkerrrecov); /* flowcontrolwatermark is in units of KBytes */ ibc = 0x5ULL << SYM_LSB(IBCCtrl, FlowCtrlWaterMark); /* * How often flowctrl sent. More or less in usecs; balance against * watermark value, so that in theory senders always get a flow * control update in time to not let the IB link go idle. */ ibc |= 0x3ULL << SYM_LSB(IBCCtrl, FlowCtrlPeriod); /* max error tolerance */ dd->cspec->lli_thresh = 0xf; ibc |= (u64) dd->cspec->lli_thresh << SYM_LSB(IBCCtrl, PhyerrThreshold); /* use "real" buffer space for */ ibc |= 4ULL << SYM_LSB(IBCCtrl, CreditScale); /* IB credit flow control. */ ibc |= 0xfULL << SYM_LSB(IBCCtrl, OverrunThreshold); /* * set initial max size pkt IBC will send, including ICRC; it's the * PIO buffer size in dwords, less 1; also see qib_set_mtu() */ ibc |= ((u64)(ppd->ibmaxlen >> 2) + 1) << SYM_LSB(IBCCtrl, MaxPktLen); dd->cspec->ibcctrl = ibc; /* without linkcmd or linkinitcmd! */ /* initially come up waiting for TS1, without sending anything. */ val = dd->cspec->ibcctrl | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); qib_write_kreg(dd, kr_ibcctrl, val); val = qib_read_kreg64(dd, kr_serdes_cfg0); config1 = qib_read_kreg64(dd, kr_serdes_cfg1); /* * Force reset on, also set rxdetect enable. Must do before reading * serdesstatus at least for simulation, or some of the bits in * serdes status will come back as undefined and cause simulation * failures */ val |= SYM_MASK(SerdesCfg0, ResetPLL) | SYM_MASK(SerdesCfg0, RxDetEnX) | (SYM_MASK(SerdesCfg0, L1PwrDnA) | SYM_MASK(SerdesCfg0, L1PwrDnB) | SYM_MASK(SerdesCfg0, L1PwrDnC) | SYM_MASK(SerdesCfg0, L1PwrDnD)); qib_write_kreg(dd, kr_serdes_cfg0, val); /* be sure chip saw it */ qib_read_kreg64(dd, kr_scratch); udelay(5); /* need pll reset set at least for a bit */ /* * after PLL is reset, set the per-lane Resets and TxIdle and * clear the PLL reset and rxdetect (to get falling edge). * Leave L1PWR bits set (permanently) */ val &= ~(SYM_MASK(SerdesCfg0, RxDetEnX) | SYM_MASK(SerdesCfg0, ResetPLL) | (SYM_MASK(SerdesCfg0, L1PwrDnA) | SYM_MASK(SerdesCfg0, L1PwrDnB) | SYM_MASK(SerdesCfg0, L1PwrDnC) | SYM_MASK(SerdesCfg0, L1PwrDnD))); val |= (SYM_MASK(SerdesCfg0, ResetA) | SYM_MASK(SerdesCfg0, ResetB) | SYM_MASK(SerdesCfg0, ResetC) | SYM_MASK(SerdesCfg0, ResetD)) | SYM_MASK(SerdesCfg0, TxIdeEnX); qib_write_kreg(dd, kr_serdes_cfg0, val); /* be sure chip saw it */ (void) qib_read_kreg64(dd, kr_scratch); /* need PLL reset clear for at least 11 usec before lane * resets cleared; give it a few more to be sure */ udelay(15); val &= ~((SYM_MASK(SerdesCfg0, ResetA) | SYM_MASK(SerdesCfg0, ResetB) | SYM_MASK(SerdesCfg0, ResetC) | SYM_MASK(SerdesCfg0, ResetD)) | SYM_MASK(SerdesCfg0, TxIdeEnX)); qib_write_kreg(dd, kr_serdes_cfg0, val); /* be sure chip saw it */ (void) qib_read_kreg64(dd, kr_scratch); val = qib_read_kreg64(dd, kr_xgxs_cfg); prev_val = val; if (val & QLOGIC_IB_XGXS_RESET) val &= ~QLOGIC_IB_XGXS_RESET; if (SYM_FIELD(val, XGXSCfg, polarity_inv) != ppd->rx_pol_inv) { /* need to compensate for Tx inversion in partner */ val &= ~SYM_MASK(XGXSCfg, polarity_inv); val |= (u64)ppd->rx_pol_inv << SYM_LSB(XGXSCfg, polarity_inv); } if (val != prev_val) qib_write_kreg(dd, kr_xgxs_cfg, val); val = qib_read_kreg64(dd, kr_serdes_cfg0); /* clear current and de-emphasis bits */ config1 &= ~0x0ffffffff00ULL; /* set current to 20ma */ config1 |= 0x00000000000ULL; /* set de-emphasis to -5.68dB */ config1 |= 0x0cccc000000ULL; qib_write_kreg(dd, kr_serdes_cfg1, config1); /* base and port guid same for single port */ ppd->guid = dd->base_guid; /* * the process of setting and un-resetting the serdes normally * causes a serdes PLL error, so check for that and clear it * here. Also clearr hwerr bit in errstatus, but not others. */ hwstat = qib_read_kreg64(dd, kr_hwerrstatus); if (hwstat) { /* should just have PLL, clear all set, in an case */ qib_write_kreg(dd, kr_hwerrclear, hwstat); qib_write_kreg(dd, kr_errclear, ERR_MASK(HardwareErr)); } dd->control |= QLOGIC_IB_C_LINKENABLE; dd->control &= ~QLOGIC_IB_C_FREEZEMODE; qib_write_kreg(dd, kr_control, dd->control); return 0; } /** * qib_6120_quiet_serdes - set serdes to txidle * @ppd: physical port of the qlogic_ib device * Called when driver is being unloaded */ static void qib_6120_quiet_serdes(struct qib_pportdata *ppd) { struct qib_devdata *dd = ppd->dd; u64 val; qib_set_ib_6120_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); /* disable IBC */ dd->control &= ~QLOGIC_IB_C_LINKENABLE; qib_write_kreg(dd, kr_control, dd->control | QLOGIC_IB_C_FREEZEMODE); if (dd->cspec->ibsymdelta || dd->cspec->iblnkerrdelta || dd->cspec->ibdeltainprog) { u64 diagc; /* enable counter writes */ diagc = qib_read_kreg64(dd, kr_hwdiagctrl); qib_write_kreg(dd, kr_hwdiagctrl, diagc | SYM_MASK(HwDiagCtrl, CounterWrEnable)); if (dd->cspec->ibsymdelta || dd->cspec->ibdeltainprog) { val = read_6120_creg32(dd, cr_ibsymbolerr); if (dd->cspec->ibdeltainprog) val -= val - dd->cspec->ibsymsnap; val -= dd->cspec->ibsymdelta; write_6120_creg(dd, cr_ibsymbolerr, val); } if (dd->cspec->iblnkerrdelta || dd->cspec->ibdeltainprog) { val = read_6120_creg32(dd, cr_iblinkerrrecov); if (dd->cspec->ibdeltainprog) val -= val - dd->cspec->iblnkerrsnap; val -= dd->cspec->iblnkerrdelta; write_6120_creg(dd, cr_iblinkerrrecov, val); } /* and disable counter writes */ qib_write_kreg(dd, kr_hwdiagctrl, diagc); } val = qib_read_kreg64(dd, kr_serdes_cfg0); val |= SYM_MASK(SerdesCfg0, TxIdeEnX); qib_write_kreg(dd, kr_serdes_cfg0, val); } /** * qib_6120_setup_setextled - set the state of the two external LEDs * @dd: the qlogic_ib device * @on: whether the link is up or not * * The exact combo of LEDs if on is true is determined by looking * at the ibcstatus. * These LEDs indicate the physical and logical state of IB link. * For this chip (at least with recommended board pinouts), LED1 * is Yellow (logical state) and LED2 is Green (physical state), * * Note: We try to match the Mellanox HCA LED behavior as best * we can. Green indicates physical link state is OK (something is * plugged in, and we can train). * Amber indicates the link is logically up (ACTIVE). * Mellanox further blinks the amber LED to indicate data packet * activity, but we have no hardware support for that, so it would * require waking up every 10-20 msecs and checking the counters * on the chip, and then turning the LED off if appropriate. That's * visible overhead, so not something we will do. * */ static void qib_6120_setup_setextled(struct qib_pportdata *ppd, u32 on) { u64 extctl, val, lst, ltst; unsigned long flags; struct qib_devdata *dd = ppd->dd; /* * The diags use the LED to indicate diag info, so we leave * the external LED alone when the diags are running. */ if (dd->diag_client) return; /* Allow override of LED display for, e.g. Locating system in rack */ if (ppd->led_override) { ltst = (ppd->led_override & QIB_LED_PHYS) ? IB_PHYSPORTSTATE_LINKUP : IB_PHYSPORTSTATE_DISABLED, lst = (ppd->led_override & QIB_LED_LOG) ? IB_PORT_ACTIVE : IB_PORT_DOWN; } else if (on) { val = qib_read_kreg64(dd, kr_ibcstatus); ltst = qib_6120_phys_portstate(val); lst = qib_6120_iblink_state(val); } else { ltst = 0; lst = 0; } spin_lock_irqsave(&dd->cspec->gpio_lock, flags); extctl = dd->cspec->extctrl & ~(SYM_MASK(EXTCtrl, LEDPriPortGreenOn) | SYM_MASK(EXTCtrl, LEDPriPortYellowOn)); if (ltst == IB_PHYSPORTSTATE_LINKUP) extctl |= SYM_MASK(EXTCtrl, LEDPriPortYellowOn); if (lst == IB_PORT_ACTIVE) extctl |= SYM_MASK(EXTCtrl, LEDPriPortGreenOn); dd->cspec->extctrl = extctl; qib_write_kreg(dd, kr_extctrl, extctl); spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); } /** * qib_6120_setup_cleanup - clean up any per-chip chip-specific stuff * @dd: the qlogic_ib device * * This is called during driver unload. */ static void qib_6120_setup_cleanup(struct qib_devdata *dd) { qib_free_irq(dd); kfree(dd->cspec->cntrs); kfree(dd->cspec->portcntrs); if (dd->cspec->dummy_hdrq) { dma_free_coherent(&dd->pcidev->dev, ALIGN(dd->rcvhdrcnt * dd->rcvhdrentsize * sizeof(u32), PAGE_SIZE), dd->cspec->dummy_hdrq, dd->cspec->dummy_hdrq_phys); dd->cspec->dummy_hdrq = NULL; } } static void qib_wantpiobuf_6120_intr(struct qib_devdata *dd, u32 needint) { unsigned long flags; spin_lock_irqsave(&dd->sendctrl_lock, flags); if (needint) dd->sendctrl |= SYM_MASK(SendCtrl, PIOIntBufAvail); else dd->sendctrl &= ~SYM_MASK(SendCtrl, PIOIntBufAvail); qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); qib_write_kreg(dd, kr_scratch, 0ULL); spin_unlock_irqrestore(&dd->sendctrl_lock, flags); } /* * handle errors and unusual events first, separate function * to improve cache hits for fast path interrupt handling */ static noinline void unlikely_6120_intr(struct qib_devdata *dd, u64 istat) { if (unlikely(istat & ~QLOGIC_IB_I_BITSEXTANT)) qib_dev_err(dd, "interrupt with unknown interrupts %Lx set\n", istat & ~QLOGIC_IB_I_BITSEXTANT); if (istat & QLOGIC_IB_I_ERROR) { u64 estat = 0; qib_stats.sps_errints++; estat = qib_read_kreg64(dd, kr_errstatus); if (!estat) qib_devinfo(dd->pcidev, "error interrupt (%Lx), but no error bits set!\n", istat); handle_6120_errors(dd, estat); } if (istat & QLOGIC_IB_I_GPIO) { u32 gpiostatus; u32 to_clear = 0; /* * GPIO_3..5 on IBA6120 Rev2 chips indicate * errors that we need to count. */ gpiostatus = qib_read_kreg32(dd, kr_gpio_status); /* First the error-counter case. */ if (gpiostatus & GPIO_ERRINTR_MASK) { /* want to clear the bits we see asserted. */ to_clear |= (gpiostatus & GPIO_ERRINTR_MASK); /* * Count appropriately, clear bits out of our copy, * as they have been "handled". */ if (gpiostatus & (1 << GPIO_RXUVL_BIT)) dd->cspec->rxfc_unsupvl_errs++; if (gpiostatus & (1 << GPIO_OVRUN_BIT)) dd->cspec->overrun_thresh_errs++; if (gpiostatus & (1 << GPIO_LLI_BIT)) dd->cspec->lli_errs++; gpiostatus &= ~GPIO_ERRINTR_MASK; } if (gpiostatus) { /* * Some unexpected bits remain. If they could have * caused the interrupt, complain and clear. * To avoid repetition of this condition, also clear * the mask. It is almost certainly due to error. */ const u32 mask = qib_read_kreg32(dd, kr_gpio_mask); /* * Also check that the chip reflects our shadow, * and report issues, If they caused the interrupt. * we will suppress by refreshing from the shadow. */ if (mask & gpiostatus) { to_clear |= (gpiostatus & mask); dd->cspec->gpio_mask &= ~(gpiostatus & mask); qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); } } if (to_clear) qib_write_kreg(dd, kr_gpio_clear, (u64) to_clear); } } static irqreturn_t qib_6120intr(int irq, void *data) { struct qib_devdata *dd = data; irqreturn_t ret; u32 istat, ctxtrbits, rmask, crcs = 0; unsigned i; if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) { /* * This return value is not great, but we do not want the * interrupt core code to remove our interrupt handler * because we don't appear to be handling an interrupt * during a chip reset. */ ret = IRQ_HANDLED; goto bail; } istat = qib_read_kreg32(dd, kr_intstatus); if (unlikely(!istat)) { ret = IRQ_NONE; /* not our interrupt, or already handled */ goto bail; } if (unlikely(istat == -1)) { qib_bad_intrstatus(dd); /* don't know if it was our interrupt or not */ ret = IRQ_NONE; goto bail; } this_cpu_inc(*dd->int_counter); if (unlikely(istat & (~QLOGIC_IB_I_BITSEXTANT | QLOGIC_IB_I_GPIO | QLOGIC_IB_I_ERROR))) unlikely_6120_intr(dd, istat); /* * Clear the interrupt bits we found set, relatively early, so we * "know" know the chip will have seen this by the time we process * the queue, and will re-interrupt if necessary. The processor * itself won't take the interrupt again until we return. */ qib_write_kreg(dd, kr_intclear, istat); /* * Handle kernel receive queues before checking for pio buffers * available since receives can overflow; piobuf waiters can afford * a few extra cycles, since they were waiting anyway. */ ctxtrbits = istat & ((QLOGIC_IB_I_RCVAVAIL_MASK << QLOGIC_IB_I_RCVAVAIL_SHIFT) | (QLOGIC_IB_I_RCVURG_MASK << QLOGIC_IB_I_RCVURG_SHIFT)); if (ctxtrbits) { rmask = (1U << QLOGIC_IB_I_RCVAVAIL_SHIFT) | (1U << QLOGIC_IB_I_RCVURG_SHIFT); for (i = 0; i < dd->first_user_ctxt; i++) { if (ctxtrbits & rmask) { ctxtrbits &= ~rmask; crcs += qib_kreceive(dd->rcd[i], &dd->cspec->lli_counter, NULL); } rmask <<= 1; } if (crcs) { u32 cntr = dd->cspec->lli_counter; cntr += crcs; if (cntr) { if (cntr > dd->cspec->lli_thresh) { dd->cspec->lli_counter = 0; dd->cspec->lli_errs++; } else dd->cspec->lli_counter += cntr; } } if (ctxtrbits) { ctxtrbits = (ctxtrbits >> QLOGIC_IB_I_RCVAVAIL_SHIFT) | (ctxtrbits >> QLOGIC_IB_I_RCVURG_SHIFT); qib_handle_urcv(dd, ctxtrbits); } } if ((istat & QLOGIC_IB_I_SPIOBUFAVAIL) && (dd->flags & QIB_INITTED)) qib_ib_piobufavail(dd); ret = IRQ_HANDLED; bail: return ret; } /* * Set up our chip-specific interrupt handler * The interrupt type has already been setup, so * we just need to do the registration and error checking. */ static void qib_setup_6120_interrupt(struct qib_devdata *dd) { int ret; /* * If the chip supports added error indication via GPIO pins, * enable interrupts on those bits so the interrupt routine * can count the events. Also set flag so interrupt routine * can know they are expected. */ if (SYM_FIELD(dd->revision, Revision_R, ChipRevMinor) > 1) { /* Rev2+ reports extra errors via internal GPIO pins */ dd->cspec->gpio_mask |= GPIO_ERRINTR_MASK; qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); } ret = pci_request_irq(dd->pcidev, 0, qib_6120intr, NULL, dd, QIB_DRV_NAME); if (ret) qib_dev_err(dd, "Couldn't setup interrupt (irq=%d): %d\n", pci_irq_vector(dd->pcidev, 0), ret); } /** * pe_boardname - fill in the board name * @dd: the qlogic_ib device * * info is based on the board revision register */ static void pe_boardname(struct qib_devdata *dd) { u32 boardid; boardid = SYM_FIELD(dd->revision, Revision, BoardID); switch (boardid) { case 2: dd->boardname = "InfiniPath_QLE7140"; break; default: qib_dev_err(dd, "Unknown 6120 board with ID %u\n", boardid); dd->boardname = "Unknown_InfiniPath_6120"; break; } if (dd->majrev != 4 || !dd->minrev || dd->minrev > 2) qib_dev_err(dd, "Unsupported InfiniPath hardware revision %u.%u!\n", dd->majrev, dd->minrev); snprintf(dd->boardversion, sizeof(dd->boardversion), "ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n", QIB_CHIP_VERS_MAJ, QIB_CHIP_VERS_MIN, dd->boardname, (unsigned int)SYM_FIELD(dd->revision, Revision_R, Arch), dd->majrev, dd->minrev, (unsigned int)SYM_FIELD(dd->revision, Revision_R, SW)); } /* * This routine sleeps, so it can only be called from user context, not * from interrupt context. If we need interrupt context, we can split * it into two routines. */ static int qib_6120_setup_reset(struct qib_devdata *dd) { u64 val; int i; int ret; u16 cmdval; u8 int_line, clinesz; qib_pcie_getcmd(dd, &cmdval, &int_line, &clinesz); /* Use ERROR so it shows up in logs, etc. */ qib_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->unit); /* no interrupts till re-initted */ qib_6120_set_intr_state(dd, 0); dd->cspec->ibdeltainprog = 0; dd->cspec->ibsymdelta = 0; dd->cspec->iblnkerrdelta = 0; /* * Keep chip from being accessed until we are ready. Use * writeq() directly, to allow the write even though QIB_PRESENT * isn't set. */ dd->flags &= ~(QIB_INITTED | QIB_PRESENT); /* so we check interrupts work again */ dd->z_int_counter = qib_int_counter(dd); val = dd->control | QLOGIC_IB_C_RESET; writeq(val, &dd->kregbase[kr_control]); mb(); /* prevent compiler re-ordering around actual reset */ for (i = 1; i <= 5; i++) { /* * Allow MBIST, etc. to complete; longer on each retry. * We sometimes get machine checks from bus timeout if no * response, so for now, make it *really* long. */ msleep(1000 + (1 + i) * 2000); qib_pcie_reenable(dd, cmdval, int_line, clinesz); /* * Use readq directly, so we don't need to mark it as PRESENT * until we get a successful indication that all is well. */ val = readq(&dd->kregbase[kr_revision]); if (val == dd->revision) { dd->flags |= QIB_PRESENT; /* it's back */ ret = qib_reinit_intr(dd); goto bail; } } ret = 0; /* failed */ bail: if (ret) { if (qib_pcie_params(dd, dd->lbus_width, NULL)) qib_dev_err(dd, "Reset failed to setup PCIe or interrupts; continuing anyway\n"); /* clear the reset error, init error/hwerror mask */ qib_6120_init_hwerrors(dd); /* for Rev2 error interrupts; nop for rev 1 */ qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); /* clear the reset error, init error/hwerror mask */ qib_6120_init_hwerrors(dd); } return ret; } /** * qib_6120_put_tid - write a TID in chip * @dd: the qlogic_ib device * @tidptr: pointer to the expected TID (in chip) to update * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) * for expected * @pa: physical address of in memory buffer; tidinvalid if freeing * * This exists as a separate routine to allow for special locking etc. * It's used for both the full cleanup on exit, as well as the normal * setup and teardown. */ static void qib_6120_put_tid(struct qib_devdata *dd, u64 __iomem *tidptr, u32 type, unsigned long pa) { u32 __iomem *tidp32 = (u32 __iomem *)tidptr; unsigned long flags; int tidx; spinlock_t *tidlockp; /* select appropriate spinlock */ if (!dd->kregbase) return; if (pa != dd->tidinvalid) { if (pa & ((1U << 11) - 1)) { qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n", pa); return; } pa >>= 11; if (pa & ~QLOGIC_IB_RT_ADDR_MASK) { qib_dev_err(dd, "Physical page address 0x%lx larger than supported\n", pa); return; } if (type == RCVHQ_RCV_TYPE_EAGER) pa |= dd->tidtemplate; else /* for now, always full 4KB page */ pa |= 2 << 29; } /* * Avoid chip issue by writing the scratch register * before and after the TID, and with an io write barrier. * We use a spinlock around the writes, so they can't intermix * with other TID (eager or expected) writes (the chip problem * is triggered by back to back TID writes). Unfortunately, this * call can be done from interrupt level for the ctxt 0 eager TIDs, * so we have to use irqsave locks. */ /* * Assumes tidptr always > egrtidbase * if type == RCVHQ_RCV_TYPE_EAGER. */ tidx = tidptr - dd->egrtidbase; tidlockp = (type == RCVHQ_RCV_TYPE_EAGER && tidx < dd->rcvhdrcnt) ? &dd->cspec->kernel_tid_lock : &dd->cspec->user_tid_lock; spin_lock_irqsave(tidlockp, flags); qib_write_kreg(dd, kr_scratch, 0xfeeddeaf); writel(pa, tidp32); qib_write_kreg(dd, kr_scratch, 0xdeadbeef); spin_unlock_irqrestore(tidlockp, flags); } /** * qib_6120_put_tid_2 - write a TID in chip, Revision 2 or higher * @dd: the qlogic_ib device * @tidptr: pointer to the expected TID (in chip) to update * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) * for expected * @pa: physical address of in memory buffer; tidinvalid if freeing * * This exists as a separate routine to allow for selection of the * appropriate "flavor". The static calls in cleanup just use the * revision-agnostic form, as they are not performance critical. */ static void qib_6120_put_tid_2(struct qib_devdata *dd, u64 __iomem *tidptr, u32 type, unsigned long pa) { u32 __iomem *tidp32 = (u32 __iomem *)tidptr; if (!dd->kregbase) return; if (pa != dd->tidinvalid) { if (pa & ((1U << 11) - 1)) { qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n", pa); return; } pa >>= 11; if (pa & ~QLOGIC_IB_RT_ADDR_MASK) { qib_dev_err(dd, "Physical page address 0x%lx larger than supported\n", pa); return; } if (type == RCVHQ_RCV_TYPE_EAGER) pa |= dd->tidtemplate; else /* for now, always full 4KB page */ pa |= 2 << 29; } writel(pa, tidp32); } /** * qib_6120_clear_tids - clear all TID entries for a context, expected and eager * @dd: the qlogic_ib device * @ctxt: the context * * clear all TID entries for a context, expected and eager. * Used from qib_close(). On this chip, TIDs are only 32 bits, * not 64, but they are still on 64 bit boundaries, so tidbase * is declared as u64 * for the pointer math, even though we write 32 bits */ static void qib_6120_clear_tids(struct qib_devdata *dd, struct qib_ctxtdata *rcd) { u64 __iomem *tidbase; unsigned long tidinv; u32 ctxt; int i; if (!dd->kregbase || !rcd) return; ctxt = rcd->ctxt; tidinv = dd->tidinvalid; tidbase = (u64 __iomem *) ((char __iomem *)(dd->kregbase) + dd->rcvtidbase + ctxt * dd->rcvtidcnt * sizeof(*tidbase)); for (i = 0; i < dd->rcvtidcnt; i++) /* use func pointer because could be one of two funcs */ dd->f_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED, tidinv); tidbase = (u64 __iomem *) ((char __iomem *)(dd->kregbase) + dd->rcvegrbase + rcd->rcvegr_tid_base * sizeof(*tidbase)); for (i = 0; i < rcd->rcvegrcnt; i++) /* use func pointer because could be one of two funcs */ dd->f_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER, tidinv); } /** * qib_6120_tidtemplate - setup constants for TID updates * @dd: the qlogic_ib device * * We setup stuff that we use a lot, to avoid calculating each time */ static void qib_6120_tidtemplate(struct qib_devdata *dd) { u32 egrsize = dd->rcvegrbufsize; /* * For now, we always allocate 4KB buffers (at init) so we can * receive max size packets. We may want a module parameter to * specify 2KB or 4KB and/or make be per ctxt instead of per device * for those who want to reduce memory footprint. Note that the * rcvhdrentsize size must be large enough to hold the largest * IB header (currently 96 bytes) that we expect to handle (plus of * course the 2 dwords of RHF). */ if (egrsize == 2048) dd->tidtemplate = 1U << 29; else if (egrsize == 4096) dd->tidtemplate = 2U << 29; dd->tidinvalid = 0; } int __attribute__((weak)) qib_unordered_wc(void) { return 0; } /** * qib_6120_get_base_info - set chip-specific flags for user code * @rcd: the qlogic_ib ctxt * @kbase: qib_base_info pointer * * We set the PCIE flag because the lower bandwidth on PCIe vs * HyperTransport can affect some user packet algorithms. */ static int qib_6120_get_base_info(struct qib_ctxtdata *rcd, struct qib_base_info *kinfo) { if (qib_unordered_wc()) kinfo->spi_runtime_flags |= QIB_RUNTIME_FORCE_WC_ORDER; kinfo->spi_runtime_flags |= QIB_RUNTIME_PCIE | QIB_RUNTIME_FORCE_PIOAVAIL | QIB_RUNTIME_PIO_REGSWAPPED; return 0; } static struct qib_message_header * qib_6120_get_msgheader(struct qib_devdata *dd, __le32 *rhf_addr) { return (struct qib_message_header *) &rhf_addr[sizeof(u64) / sizeof(u32)]; } static void qib_6120_config_ctxts(struct qib_devdata *dd) { dd->ctxtcnt = qib_read_kreg32(dd, kr_portcnt); if (qib_n_krcv_queues > 1) { dd->first_user_ctxt = qib_n_krcv_queues * dd->num_pports; if (dd->first_user_ctxt > dd->ctxtcnt) dd->first_user_ctxt = dd->ctxtcnt; dd->qpn_mask = dd->first_user_ctxt <= 2 ? 2 : 6; } else dd->first_user_ctxt = dd->num_pports; dd->n_krcv_queues = dd->first_user_ctxt; } static void qib_update_6120_usrhead(struct qib_ctxtdata *rcd, u64 hd, u32 updegr, u32 egrhd, u32 npkts) { if (updegr) qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt); qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt); } static u32 qib_6120_hdrqempty(struct qib_ctxtdata *rcd) { u32 head, tail; head = qib_read_ureg32(rcd->dd, ur_rcvhdrhead, rcd->ctxt); if (rcd->rcvhdrtail_kvaddr) tail = qib_get_rcvhdrtail(rcd); else tail = qib_read_ureg32(rcd->dd, ur_rcvhdrtail, rcd->ctxt); return head == tail; } /* * Used when we close any ctxt, for DMA already in flight * at close. Can't be done until we know hdrq size, so not * early in chip init. */ static void alloc_dummy_hdrq(struct qib_devdata *dd) { dd->cspec->dummy_hdrq = dma_alloc_coherent(&dd->pcidev->dev, dd->rcd[0]->rcvhdrq_size, &dd->cspec->dummy_hdrq_phys, GFP_ATOMIC | __GFP_COMP); if (!dd->cspec->dummy_hdrq) { qib_devinfo(dd->pcidev, "Couldn't allocate dummy hdrq\n"); /* fallback to just 0'ing */ dd->cspec->dummy_hdrq_phys = 0UL; } } /* * Modify the RCVCTRL register in chip-specific way. This * is a function because bit positions and (future) register * location is chip-specific, but the needed operations are * generic. <op> is a bit-mask because we often want to * do multiple modifications. */ static void rcvctrl_6120_mod(struct qib_pportdata *ppd, unsigned int op, int ctxt) { struct qib_devdata *dd = ppd->dd; u64 mask, val; unsigned long flags; spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); if (op & QIB_RCVCTRL_TAILUPD_ENB) dd->rcvctrl |= (1ULL << QLOGIC_IB_R_TAILUPD_SHIFT); if (op & QIB_RCVCTRL_TAILUPD_DIS) dd->rcvctrl &= ~(1ULL << QLOGIC_IB_R_TAILUPD_SHIFT); if (op & QIB_RCVCTRL_PKEY_ENB) dd->rcvctrl &= ~(1ULL << IBA6120_R_PKEY_DIS_SHIFT); if (op & QIB_RCVCTRL_PKEY_DIS) dd->rcvctrl |= (1ULL << IBA6120_R_PKEY_DIS_SHIFT); if (ctxt < 0) mask = (1ULL << dd->ctxtcnt) - 1; else mask = (1ULL << ctxt); if (op & QIB_RCVCTRL_CTXT_ENB) { /* always done for specific ctxt */ dd->rcvctrl |= (mask << SYM_LSB(RcvCtrl, PortEnable)); if (!(dd->flags & QIB_NODMA_RTAIL)) dd->rcvctrl |= 1ULL << QLOGIC_IB_R_TAILUPD_SHIFT; /* Write these registers before the context is enabled. */ qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr, ctxt, dd->rcd[ctxt]->rcvhdrqtailaddr_phys); qib_write_kreg_ctxt(dd, kr_rcvhdraddr, ctxt, dd->rcd[ctxt]->rcvhdrq_phys); if (ctxt == 0 && !dd->cspec->dummy_hdrq) alloc_dummy_hdrq(dd); } if (op & QIB_RCVCTRL_CTXT_DIS) dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, PortEnable)); if (op & QIB_RCVCTRL_INTRAVAIL_ENB) dd->rcvctrl |= (mask << QLOGIC_IB_R_INTRAVAIL_SHIFT); if (op & QIB_RCVCTRL_INTRAVAIL_DIS) dd->rcvctrl &= ~(mask << QLOGIC_IB_R_INTRAVAIL_SHIFT); qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl); if ((op & QIB_RCVCTRL_INTRAVAIL_ENB) && dd->rhdrhead_intr_off) { /* arm rcv interrupt */ val = qib_read_ureg32(dd, ur_rcvhdrhead, ctxt) | dd->rhdrhead_intr_off; qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); } if (op & QIB_RCVCTRL_CTXT_ENB) { /* * Init the context registers also; if we were * disabled, tail and head should both be zero * already from the enable, but since we don't * know, we have to do it explicitly. */ val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt); qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt); val = qib_read_ureg32(dd, ur_rcvhdrtail, ctxt); dd->rcd[ctxt]->head = val; /* If kctxt, interrupt on next receive. */ if (ctxt < dd->first_user_ctxt) val |= dd->rhdrhead_intr_off; qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); } if (op & QIB_RCVCTRL_CTXT_DIS) { /* * Be paranoid, and never write 0's to these, just use an * unused page. Of course, * rcvhdraddr points to a large chunk of memory, so this * could still trash things, but at least it won't trash * page 0, and by disabling the ctxt, it should stop "soon", * even if a packet or two is in already in flight after we * disabled the ctxt. Only 6120 has this issue. */ if (ctxt >= 0) { qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr, ctxt, dd->cspec->dummy_hdrq_phys); qib_write_kreg_ctxt(dd, kr_rcvhdraddr, ctxt, dd->cspec->dummy_hdrq_phys); } else { unsigned i; for (i = 0; i < dd->cfgctxts; i++) { qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr, i, dd->cspec->dummy_hdrq_phys); qib_write_kreg_ctxt(dd, kr_rcvhdraddr, i, dd->cspec->dummy_hdrq_phys); } } } spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); } /* * Modify the SENDCTRL register in chip-specific way. This * is a function there may be multiple such registers with * slightly different layouts. Only operations actually used * are implemented yet. * Chip requires no back-back sendctrl writes, so write * scratch register after writing sendctrl */ static void sendctrl_6120_mod(struct qib_pportdata *ppd, u32 op) { struct qib_devdata *dd = ppd->dd; u64 tmp_dd_sendctrl; unsigned long flags; spin_lock_irqsave(&dd->sendctrl_lock, flags); /* First the ones that are "sticky", saved in shadow */ if (op & QIB_SENDCTRL_CLEAR) dd->sendctrl = 0; if (op & QIB_SENDCTRL_SEND_DIS) dd->sendctrl &= ~SYM_MASK(SendCtrl, PIOEnable); else if (op & QIB_SENDCTRL_SEND_ENB) dd->sendctrl |= SYM_MASK(SendCtrl, PIOEnable); if (op & QIB_SENDCTRL_AVAIL_DIS) dd->sendctrl &= ~SYM_MASK(SendCtrl, PIOBufAvailUpd); else if (op & QIB_SENDCTRL_AVAIL_ENB) dd->sendctrl |= SYM_MASK(SendCtrl, PIOBufAvailUpd); if (op & QIB_SENDCTRL_DISARM_ALL) { u32 i, last; tmp_dd_sendctrl = dd->sendctrl; /* * disarm any that are not yet launched, disabling sends * and updates until done. */ last = dd->piobcnt2k + dd->piobcnt4k; tmp_dd_sendctrl &= ~(SYM_MASK(SendCtrl, PIOEnable) | SYM_MASK(SendCtrl, PIOBufAvailUpd)); for (i = 0; i < last; i++) { qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl | SYM_MASK(SendCtrl, Disarm) | i); qib_write_kreg(dd, kr_scratch, 0); } } tmp_dd_sendctrl = dd->sendctrl; if (op & QIB_SENDCTRL_FLUSH) tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Abort); if (op & QIB_SENDCTRL_DISARM) tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Disarm) | ((op & QIB_6120_SendCtrl_DisarmPIOBuf_RMASK) << SYM_LSB(SendCtrl, DisarmPIOBuf)); if (op & QIB_SENDCTRL_AVAIL_BLIP) tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, PIOBufAvailUpd); qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl); qib_write_kreg(dd, kr_scratch, 0); if (op & QIB_SENDCTRL_AVAIL_BLIP) { qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); qib_write_kreg(dd, kr_scratch, 0); } spin_unlock_irqrestore(&dd->sendctrl_lock, flags); if (op & QIB_SENDCTRL_FLUSH) { u32 v; /* * ensure writes have hit chip, then do a few * more reads, to allow DMA of pioavail registers * to occur, so in-memory copy is in sync with * the chip. Not always safe to sleep. */ v = qib_read_kreg32(dd, kr_scratch); qib_write_kreg(dd, kr_scratch, v); v = qib_read_kreg32(dd, kr_scratch); qib_write_kreg(dd, kr_scratch, v); qib_read_kreg32(dd, kr_scratch); } } /** * qib_portcntr_6120 - read a per-port counter * @dd: the qlogic_ib device * @creg: the counter to snapshot */ static u64 qib_portcntr_6120(struct qib_pportdata *ppd, u32 reg) { u64 ret = 0ULL; struct qib_devdata *dd = ppd->dd; u16 creg; /* 0xffff for unimplemented or synthesized counters */ static const u16 xlator[] = { [QIBPORTCNTR_PKTSEND] = cr_pktsend, [QIBPORTCNTR_WORDSEND] = cr_wordsend, [QIBPORTCNTR_PSXMITDATA] = 0xffff, [QIBPORTCNTR_PSXMITPKTS] = 0xffff, [QIBPORTCNTR_PSXMITWAIT] = 0xffff, [QIBPORTCNTR_SENDSTALL] = cr_sendstall, [QIBPORTCNTR_PKTRCV] = cr_pktrcv, [QIBPORTCNTR_PSRCVDATA] = 0xffff, [QIBPORTCNTR_PSRCVPKTS] = 0xffff, [QIBPORTCNTR_RCVEBP] = cr_rcvebp, [QIBPORTCNTR_RCVOVFL] = cr_rcvovfl, [QIBPORTCNTR_WORDRCV] = cr_wordrcv, [QIBPORTCNTR_RXDROPPKT] = cr_rxdroppkt, [QIBPORTCNTR_RXLOCALPHYERR] = 0xffff, [QIBPORTCNTR_RXVLERR] = 0xffff, [QIBPORTCNTR_ERRICRC] = cr_erricrc, [QIBPORTCNTR_ERRVCRC] = cr_errvcrc, [QIBPORTCNTR_ERRLPCRC] = cr_errlpcrc, [QIBPORTCNTR_BADFORMAT] = cr_badformat, [QIBPORTCNTR_ERR_RLEN] = cr_err_rlen, [QIBPORTCNTR_IBSYMBOLERR] = cr_ibsymbolerr, [QIBPORTCNTR_INVALIDRLEN] = cr_invalidrlen, [QIBPORTCNTR_UNSUPVL] = cr_txunsupvl, [QIBPORTCNTR_EXCESSBUFOVFL] = 0xffff, [QIBPORTCNTR_ERRLINK] = cr_errlink, [QIBPORTCNTR_IBLINKDOWN] = cr_iblinkdown, [QIBPORTCNTR_IBLINKERRRECOV] = cr_iblinkerrrecov, [QIBPORTCNTR_LLI] = 0xffff, [QIBPORTCNTR_PSINTERVAL] = 0xffff, [QIBPORTCNTR_PSSTART] = 0xffff, [QIBPORTCNTR_PSSTAT] = 0xffff, [QIBPORTCNTR_VL15PKTDROP] = 0xffff, [QIBPORTCNTR_ERRPKEY] = cr_errpkey, [QIBPORTCNTR_KHDROVFL] = 0xffff, }; if (reg >= ARRAY_SIZE(xlator)) { qib_devinfo(ppd->dd->pcidev, "Unimplemented portcounter %u\n", reg); goto done; } creg = xlator[reg]; /* handle counters requests not implemented as chip counters */ if (reg == QIBPORTCNTR_LLI) ret = dd->cspec->lli_errs; else if (reg == QIBPORTCNTR_EXCESSBUFOVFL) ret = dd->cspec->overrun_thresh_errs; else if (reg == QIBPORTCNTR_KHDROVFL) { int i; /* sum over all kernel contexts */ for (i = 0; i < dd->first_user_ctxt; i++) ret += read_6120_creg32(dd, cr_portovfl + i); } else if (reg == QIBPORTCNTR_PSSTAT) ret = dd->cspec->pma_sample_status; if (creg == 0xffff) goto done; /* * only fast incrementing counters are 64bit; use 32 bit reads to * avoid two independent reads when on opteron */ if (creg == cr_wordsend || creg == cr_wordrcv || creg == cr_pktsend || creg == cr_pktrcv) ret = read_6120_creg(dd, creg); else ret = read_6120_creg32(dd, creg); if (creg == cr_ibsymbolerr) { if (dd->cspec->ibdeltainprog) ret -= ret - dd->cspec->ibsymsnap; ret -= dd->cspec->ibsymdelta; } else if (creg == cr_iblinkerrrecov) { if (dd->cspec->ibdeltainprog) ret -= ret - dd->cspec->iblnkerrsnap; ret -= dd->cspec->iblnkerrdelta; } if (reg == QIBPORTCNTR_RXDROPPKT) /* add special cased count */ ret += dd->cspec->rxfc_unsupvl_errs; done: return ret; } /* * Device counter names (not port-specific), one line per stat, * single string. Used by utilities like ipathstats to print the stats * in a way which works for different versions of drivers, without changing * the utility. Names need to be 12 chars or less (w/o newline), for proper * display by utility. * Non-error counters are first. * Start of "error" conters is indicated by a leading "E " on the first * "error" counter, and doesn't count in label length. * The EgrOvfl list needs to be last so we truncate them at the configured * context count for the device. * cntr6120indices contains the corresponding register indices. */ static const char cntr6120names[] = "Interrupts\n" "HostBusStall\n" "E RxTIDFull\n" "RxTIDInvalid\n" "Ctxt0EgrOvfl\n" "Ctxt1EgrOvfl\n" "Ctxt2EgrOvfl\n" "Ctxt3EgrOvfl\n" "Ctxt4EgrOvfl\n"; static const size_t cntr6120indices[] = { cr_lbint, cr_lbflowstall, cr_errtidfull, cr_errtidvalid, cr_portovfl + 0, cr_portovfl + 1, cr_portovfl + 2, cr_portovfl + 3, cr_portovfl + 4, }; /* * same as cntr6120names and cntr6120indices, but for port-specific counters. * portcntr6120indices is somewhat complicated by some registers needing * adjustments of various kinds, and those are ORed with _PORT_VIRT_FLAG */ static const char portcntr6120names[] = "TxPkt\n" "TxFlowPkt\n" "TxWords\n" "RxPkt\n" "RxFlowPkt\n" "RxWords\n" "TxFlowStall\n" "E IBStatusChng\n" "IBLinkDown\n" "IBLnkRecov\n" "IBRxLinkErr\n" "IBSymbolErr\n" "RxLLIErr\n" "RxBadFormat\n" "RxBadLen\n" "RxBufOvrfl\n" "RxEBP\n" "RxFlowCtlErr\n" "RxICRCerr\n" "RxLPCRCerr\n" "RxVCRCerr\n" "RxInvalLen\n" "RxInvalPKey\n" "RxPktDropped\n" "TxBadLength\n" "TxDropped\n" "TxInvalLen\n" "TxUnderrun\n" "TxUnsupVL\n" ; #define _PORT_VIRT_FLAG 0x8000 /* "virtual", need adjustments */ static const size_t portcntr6120indices[] = { QIBPORTCNTR_PKTSEND | _PORT_VIRT_FLAG, cr_pktsendflow, QIBPORTCNTR_WORDSEND | _PORT_VIRT_FLAG, QIBPORTCNTR_PKTRCV | _PORT_VIRT_FLAG, cr_pktrcvflowctrl, QIBPORTCNTR_WORDRCV | _PORT_VIRT_FLAG, QIBPORTCNTR_SENDSTALL | _PORT_VIRT_FLAG, cr_ibstatuschange, QIBPORTCNTR_IBLINKDOWN | _PORT_VIRT_FLAG, QIBPORTCNTR_IBLINKERRRECOV | _PORT_VIRT_FLAG, QIBPORTCNTR_ERRLINK | _PORT_VIRT_FLAG, QIBPORTCNTR_IBSYMBOLERR | _PORT_VIRT_FLAG, QIBPORTCNTR_LLI | _PORT_VIRT_FLAG, QIBPORTCNTR_BADFORMAT | _PORT_VIRT_FLAG, QIBPORTCNTR_ERR_RLEN | _PORT_VIRT_FLAG, QIBPORTCNTR_RCVOVFL | _PORT_VIRT_FLAG, QIBPORTCNTR_RCVEBP | _PORT_VIRT_FLAG, cr_rcvflowctrl_err, QIBPORTCNTR_ERRICRC | _PORT_VIRT_FLAG, QIBPORTCNTR_ERRLPCRC | _PORT_VIRT_FLAG, QIBPORTCNTR_ERRVCRC | _PORT_VIRT_FLAG, QIBPORTCNTR_INVALIDRLEN | _PORT_VIRT_FLAG, QIBPORTCNTR_ERRPKEY | _PORT_VIRT_FLAG, QIBPORTCNTR_RXDROPPKT | _PORT_VIRT_FLAG, cr_invalidslen, cr_senddropped, cr_errslen, cr_sendunderrun, cr_txunsupvl, }; /* do all the setup to make the counter reads efficient later */ static void init_6120_cntrnames(struct qib_devdata *dd) { int i, j = 0; char *s; for (i = 0, s = (char *)cntr6120names; s && j <= dd->cfgctxts; i++) { /* we always have at least one counter before the egrovfl */ if (!j && !strncmp("Ctxt0EgrOvfl", s + 1, 12)) j = 1; s = strchr(s + 1, '\n'); if (s && j) j++; } dd->cspec->ncntrs = i; if (!s) /* full list; size is without terminating null */ dd->cspec->cntrnamelen = sizeof(cntr6120names) - 1; else dd->cspec->cntrnamelen = 1 + s - cntr6120names; dd->cspec->cntrs = kmalloc_array(dd->cspec->ncntrs, sizeof(u64), GFP_KERNEL); for (i = 0, s = (char *)portcntr6120names; s; i++) s = strchr(s + 1, '\n'); dd->cspec->nportcntrs = i - 1; dd->cspec->portcntrnamelen = sizeof(portcntr6120names) - 1; dd->cspec->portcntrs = kmalloc_array(dd->cspec->nportcntrs, sizeof(u64), GFP_KERNEL); } static u32 qib_read_6120cntrs(struct qib_devdata *dd, loff_t pos, char **namep, u64 **cntrp) { u32 ret; if (namep) { ret = dd->cspec->cntrnamelen; if (pos >= ret) ret = 0; /* final read after getting everything */ else *namep = (char *)cntr6120names; } else { u64 *cntr = dd->cspec->cntrs; int i; ret = dd->cspec->ncntrs * sizeof(u64); if (!cntr || pos >= ret) { /* everything read, or couldn't get memory */ ret = 0; goto done; } if (pos >= ret) { ret = 0; /* final read after getting everything */ goto done; } *cntrp = cntr; for (i = 0; i < dd->cspec->ncntrs; i++) *cntr++ = read_6120_creg32(dd, cntr6120indices[i]); } done: return ret; } static u32 qib_read_6120portcntrs(struct qib_devdata *dd, loff_t pos, u32 port, char **namep, u64 **cntrp) { u32 ret; if (namep) { ret = dd->cspec->portcntrnamelen; if (pos >= ret) ret = 0; /* final read after getting everything */ else *namep = (char *)portcntr6120names; } else { u64 *cntr = dd->cspec->portcntrs; struct qib_pportdata *ppd = &dd->pport[port]; int i; ret = dd->cspec->nportcntrs * sizeof(u64); if (!cntr || pos >= ret) { /* everything read, or couldn't get memory */ ret = 0; goto done; } *cntrp = cntr; for (i = 0; i < dd->cspec->nportcntrs; i++) { if (portcntr6120indices[i] & _PORT_VIRT_FLAG) *cntr++ = qib_portcntr_6120(ppd, portcntr6120indices[i] & ~_PORT_VIRT_FLAG); else *cntr++ = read_6120_creg32(dd, portcntr6120indices[i]); } } done: return ret; } static void qib_chk_6120_errormask(struct qib_devdata *dd) { static u32 fixed; u32 ctrl; unsigned long errormask; unsigned long hwerrs; if (!dd->cspec->errormask || !(dd->flags & QIB_INITTED)) return; errormask = qib_read_kreg64(dd, kr_errmask); if (errormask == dd->cspec->errormask) return; fixed++; hwerrs = qib_read_kreg64(dd, kr_hwerrstatus); ctrl = qib_read_kreg32(dd, kr_control); qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); if ((hwerrs & dd->cspec->hwerrmask) || (ctrl & QLOGIC_IB_C_FREEZEMODE)) { qib_write_kreg(dd, kr_hwerrclear, 0ULL); qib_write_kreg(dd, kr_errclear, 0ULL); /* force re-interrupt of pending events, just in case */ qib_write_kreg(dd, kr_intclear, 0ULL); qib_devinfo(dd->pcidev, "errormask fixed(%u) %lx->%lx, ctrl %x hwerr %lx\n", fixed, errormask, (unsigned long)dd->cspec->errormask, ctrl, hwerrs); } } /** * qib_get_faststats - get word counters from chip before they overflow * @opaque - contains a pointer to the qlogic_ib device qib_devdata * * This needs more work; in particular, decision on whether we really * need traffic_wds done the way it is * called from add_timer */ static void qib_get_6120_faststats(struct timer_list *t) { struct qib_devdata *dd = from_timer(dd, t, stats_timer); struct qib_pportdata *ppd = dd->pport; unsigned long flags; u64 traffic_wds; /* * don't access the chip while running diags, or memory diags can * fail */ if (!(dd->flags & QIB_INITTED) || dd->diag_client) /* but re-arm the timer, for diags case; won't hurt other */ goto done; /* * We now try to maintain an activity timer, based on traffic * exceeding a threshold, so we need to check the word-counts * even if they are 64-bit. */ traffic_wds = qib_portcntr_6120(ppd, cr_wordsend) + qib_portcntr_6120(ppd, cr_wordrcv); spin_lock_irqsave(&dd->eep_st_lock, flags); traffic_wds -= dd->traffic_wds; dd->traffic_wds += traffic_wds; spin_unlock_irqrestore(&dd->eep_st_lock, flags); qib_chk_6120_errormask(dd); done: mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER); } /* no interrupt fallback for these chips */ static int qib_6120_nointr_fallback(struct qib_devdata *dd) { return 0; } /* * reset the XGXS (between serdes and IBC). Slightly less intrusive * than resetting the IBC or external link state, and useful in some * cases to cause some retraining. To do this right, we reset IBC * as well. */ static void qib_6120_xgxs_reset(struct qib_pportdata *ppd) { u64 val, prev_val; struct qib_devdata *dd = ppd->dd; prev_val = qib_read_kreg64(dd, kr_xgxs_cfg); val = prev_val | QLOGIC_IB_XGXS_RESET; prev_val &= ~QLOGIC_IB_XGXS_RESET; /* be sure */ qib_write_kreg(dd, kr_control, dd->control & ~QLOGIC_IB_C_LINKENABLE); qib_write_kreg(dd, kr_xgxs_cfg, val); qib_read_kreg32(dd, kr_scratch); qib_write_kreg(dd, kr_xgxs_cfg, prev_val); qib_write_kreg(dd, kr_control, dd->control); } static int qib_6120_get_ib_cfg(struct qib_pportdata *ppd, int which) { int ret; switch (which) { case QIB_IB_CFG_LWID: ret = ppd->link_width_active; break; case QIB_IB_CFG_SPD: ret = ppd->link_speed_active; break; case QIB_IB_CFG_LWID_ENB: ret = ppd->link_width_enabled; break; case QIB_IB_CFG_SPD_ENB: ret = ppd->link_speed_enabled; break; case QIB_IB_CFG_OP_VLS: ret = ppd->vls_operational; break; case QIB_IB_CFG_VL_HIGH_CAP: ret = 0; break; case QIB_IB_CFG_VL_LOW_CAP: ret = 0; break; case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ ret = SYM_FIELD(ppd->dd->cspec->ibcctrl, IBCCtrl, OverrunThreshold); break; case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ ret = SYM_FIELD(ppd->dd->cspec->ibcctrl, IBCCtrl, PhyerrThreshold); break; case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ /* will only take effect when the link state changes */ ret = (ppd->dd->cspec->ibcctrl & SYM_MASK(IBCCtrl, LinkDownDefaultState)) ? IB_LINKINITCMD_SLEEP : IB_LINKINITCMD_POLL; break; case QIB_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */ ret = 0; /* no heartbeat on this chip */ break; case QIB_IB_CFG_PMA_TICKS: ret = 250; /* 1 usec. */ break; default: ret = -EINVAL; break; } return ret; } /* * We assume range checking is already done, if needed. */ static int qib_6120_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val) { struct qib_devdata *dd = ppd->dd; int ret = 0; u64 val64; u16 lcmd, licmd; switch (which) { case QIB_IB_CFG_LWID_ENB: ppd->link_width_enabled = val; break; case QIB_IB_CFG_SPD_ENB: ppd->link_speed_enabled = val; break; case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ val64 = SYM_FIELD(dd->cspec->ibcctrl, IBCCtrl, OverrunThreshold); if (val64 != val) { dd->cspec->ibcctrl &= ~SYM_MASK(IBCCtrl, OverrunThreshold); dd->cspec->ibcctrl |= (u64) val << SYM_LSB(IBCCtrl, OverrunThreshold); qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl); qib_write_kreg(dd, kr_scratch, 0); } break; case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ val64 = SYM_FIELD(dd->cspec->ibcctrl, IBCCtrl, PhyerrThreshold); if (val64 != val) { dd->cspec->ibcctrl &= ~SYM_MASK(IBCCtrl, PhyerrThreshold); dd->cspec->ibcctrl |= (u64) val << SYM_LSB(IBCCtrl, PhyerrThreshold); qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl); qib_write_kreg(dd, kr_scratch, 0); } break; case QIB_IB_CFG_PKEYS: /* update pkeys */ val64 = (u64) ppd->pkeys[0] | ((u64) ppd->pkeys[1] << 16) | ((u64) ppd->pkeys[2] << 32) | ((u64) ppd->pkeys[3] << 48); qib_write_kreg(dd, kr_partitionkey, val64); break; case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ /* will only take effect when the link state changes */ if (val == IB_LINKINITCMD_POLL) dd->cspec->ibcctrl &= ~SYM_MASK(IBCCtrl, LinkDownDefaultState); else /* SLEEP */ dd->cspec->ibcctrl |= SYM_MASK(IBCCtrl, LinkDownDefaultState); qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl); qib_write_kreg(dd, kr_scratch, 0); break; case QIB_IB_CFG_MTU: /* update the MTU in IBC */ /* * Update our housekeeping variables, and set IBC max * size, same as init code; max IBC is max we allow in * buffer, less the qword pbc, plus 1 for ICRC, in dwords * Set even if it's unchanged, print debug message only * on changes. */ val = (ppd->ibmaxlen >> 2) + 1; dd->cspec->ibcctrl &= ~SYM_MASK(IBCCtrl, MaxPktLen); dd->cspec->ibcctrl |= (u64)val << SYM_LSB(IBCCtrl, MaxPktLen); qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl); qib_write_kreg(dd, kr_scratch, 0); break; case QIB_IB_CFG_LSTATE: /* set the IB link state */ switch (val & 0xffff0000) { case IB_LINKCMD_DOWN: lcmd = QLOGIC_IB_IBCC_LINKCMD_DOWN; if (!dd->cspec->ibdeltainprog) { dd->cspec->ibdeltainprog = 1; dd->cspec->ibsymsnap = read_6120_creg32(dd, cr_ibsymbolerr); dd->cspec->iblnkerrsnap = read_6120_creg32(dd, cr_iblinkerrrecov); } break; case IB_LINKCMD_ARMED: lcmd = QLOGIC_IB_IBCC_LINKCMD_ARMED; break; case IB_LINKCMD_ACTIVE: lcmd = QLOGIC_IB_IBCC_LINKCMD_ACTIVE; break; default: ret = -EINVAL; qib_dev_err(dd, "bad linkcmd req 0x%x\n", val >> 16); goto bail; } switch (val & 0xffff) { case IB_LINKINITCMD_NOP: licmd = 0; break; case IB_LINKINITCMD_POLL: licmd = QLOGIC_IB_IBCC_LINKINITCMD_POLL; break; case IB_LINKINITCMD_SLEEP: licmd = QLOGIC_IB_IBCC_LINKINITCMD_SLEEP; break; case IB_LINKINITCMD_DISABLE: licmd = QLOGIC_IB_IBCC_LINKINITCMD_DISABLE; break; default: ret = -EINVAL; qib_dev_err(dd, "bad linkinitcmd req 0x%x\n", val & 0xffff); goto bail; } qib_set_ib_6120_lstate(ppd, lcmd, licmd); goto bail; case QIB_IB_CFG_HRTBT: ret = -EINVAL; break; default: ret = -EINVAL; } bail: return ret; } static int qib_6120_set_loopback(struct qib_pportdata *ppd, const char *what) { int ret = 0; if (!strncmp(what, "ibc", 3)) { ppd->dd->cspec->ibcctrl |= SYM_MASK(IBCCtrl, Loopback); qib_devinfo(ppd->dd->pcidev, "Enabling IB%u:%u IBC loopback\n", ppd->dd->unit, ppd->port); } else if (!strncmp(what, "off", 3)) { ppd->dd->cspec->ibcctrl &= ~SYM_MASK(IBCCtrl, Loopback); qib_devinfo(ppd->dd->pcidev, "Disabling IB%u:%u IBC loopback (normal)\n", ppd->dd->unit, ppd->port); } else ret = -EINVAL; if (!ret) { qib_write_kreg(ppd->dd, kr_ibcctrl, ppd->dd->cspec->ibcctrl); qib_write_kreg(ppd->dd, kr_scratch, 0); } return ret; } static void pma_6120_timer(struct timer_list *t) { struct qib_chip_specific *cs = from_timer(cs, t, pma_timer); struct qib_pportdata *ppd = cs->ppd; struct qib_ibport *ibp = &ppd->ibport_data; unsigned long flags; spin_lock_irqsave(&ibp->rvp.lock, flags); if (cs->pma_sample_status == IB_PMA_SAMPLE_STATUS_STARTED) { cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_RUNNING; qib_snapshot_counters(ppd, &cs->sword, &cs->rword, &cs->spkts, &cs->rpkts, &cs->xmit_wait); mod_timer(&cs->pma_timer, jiffies + usecs_to_jiffies(ibp->rvp.pma_sample_interval)); } else if (cs->pma_sample_status == IB_PMA_SAMPLE_STATUS_RUNNING) { u64 ta, tb, tc, td, te; cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_DONE; qib_snapshot_counters(ppd, &ta, &tb, &tc, &td, &te); cs->sword = ta - cs->sword; cs->rword = tb - cs->rword; cs->spkts = tc - cs->spkts; cs->rpkts = td - cs->rpkts; cs->xmit_wait = te - cs->xmit_wait; } spin_unlock_irqrestore(&ibp->rvp.lock, flags); } /* * Note that the caller has the ibp->rvp.lock held. */ static void qib_set_cntr_6120_sample(struct qib_pportdata *ppd, u32 intv, u32 start) { struct qib_chip_specific *cs = ppd->dd->cspec; if (start && intv) { cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_STARTED; mod_timer(&cs->pma_timer, jiffies + usecs_to_jiffies(start)); } else if (intv) { cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_RUNNING; qib_snapshot_counters(ppd, &cs->sword, &cs->rword, &cs->spkts, &cs->rpkts, &cs->xmit_wait); mod_timer(&cs->pma_timer, jiffies + usecs_to_jiffies(intv)); } else { cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_DONE; cs->sword = 0; cs->rword = 0; cs->spkts = 0; cs->rpkts = 0; cs->xmit_wait = 0; } } static u32 qib_6120_iblink_state(u64 ibcs) { u32 state = (u32)SYM_FIELD(ibcs, IBCStatus, LinkState); switch (state) { case IB_6120_L_STATE_INIT: state = IB_PORT_INIT; break; case IB_6120_L_STATE_ARM: state = IB_PORT_ARMED; break; case IB_6120_L_STATE_ACTIVE: /* fall through */ case IB_6120_L_STATE_ACT_DEFER: state = IB_PORT_ACTIVE; break; default: /* fall through */ case IB_6120_L_STATE_DOWN: state = IB_PORT_DOWN; break; } return state; } /* returns the IBTA port state, rather than the IBC link training state */ static u8 qib_6120_phys_portstate(u64 ibcs) { u8 state = (u8)SYM_FIELD(ibcs, IBCStatus, LinkTrainingState); return qib_6120_physportstate[state]; } static int qib_6120_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs) { unsigned long flags; spin_lock_irqsave(&ppd->lflags_lock, flags); ppd->lflags &= ~QIBL_IB_FORCE_NOTIFY; spin_unlock_irqrestore(&ppd->lflags_lock, flags); if (ibup) { if (ppd->dd->cspec->ibdeltainprog) { ppd->dd->cspec->ibdeltainprog = 0; ppd->dd->cspec->ibsymdelta += read_6120_creg32(ppd->dd, cr_ibsymbolerr) - ppd->dd->cspec->ibsymsnap; ppd->dd->cspec->iblnkerrdelta += read_6120_creg32(ppd->dd, cr_iblinkerrrecov) - ppd->dd->cspec->iblnkerrsnap; } qib_hol_init(ppd); } else { ppd->dd->cspec->lli_counter = 0; if (!ppd->dd->cspec->ibdeltainprog) { ppd->dd->cspec->ibdeltainprog = 1; ppd->dd->cspec->ibsymsnap = read_6120_creg32(ppd->dd, cr_ibsymbolerr); ppd->dd->cspec->iblnkerrsnap = read_6120_creg32(ppd->dd, cr_iblinkerrrecov); } qib_hol_down(ppd); } qib_6120_setup_setextled(ppd, ibup); return 0; } /* Does read/modify/write to appropriate registers to * set output and direction bits selected by mask. * these are in their canonical postions (e.g. lsb of * dir will end up in D48 of extctrl on existing chips). * returns contents of GP Inputs. */ static int gpio_6120_mod(struct qib_devdata *dd, u32 out, u32 dir, u32 mask) { u64 read_val, new_out; unsigned long flags; if (mask) { /* some bits being written, lock access to GPIO */ dir &= mask; out &= mask; spin_lock_irqsave(&dd->cspec->gpio_lock, flags); dd->cspec->extctrl &= ~((u64)mask << SYM_LSB(EXTCtrl, GPIOOe)); dd->cspec->extctrl |= ((u64) dir << SYM_LSB(EXTCtrl, GPIOOe)); new_out = (dd->cspec->gpio_out & ~mask) | out; qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); qib_write_kreg(dd, kr_gpio_out, new_out); dd->cspec->gpio_out = new_out; spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); } /* * It is unlikely that a read at this time would get valid * data on a pin whose direction line was set in the same * call to this function. We include the read here because * that allows us to potentially combine a change on one pin with * a read on another, and because the old code did something like * this. */ read_val = qib_read_kreg64(dd, kr_extstatus); return SYM_FIELD(read_val, EXTStatus, GPIOIn); } /* * Read fundamental info we need to use the chip. These are * the registers that describe chip capabilities, and are * saved in shadow registers. */ static void get_6120_chip_params(struct qib_devdata *dd) { u64 val; u32 piobufs; int mtu; dd->uregbase = qib_read_kreg32(dd, kr_userregbase); dd->rcvtidcnt = qib_read_kreg32(dd, kr_rcvtidcnt); dd->rcvtidbase = qib_read_kreg32(dd, kr_rcvtidbase); dd->rcvegrbase = qib_read_kreg32(dd, kr_rcvegrbase); dd->palign = qib_read_kreg32(dd, kr_palign); dd->piobufbase = qib_read_kreg64(dd, kr_sendpiobufbase); dd->pio2k_bufbase = dd->piobufbase & 0xffffffff; dd->rcvhdrcnt = qib_read_kreg32(dd, kr_rcvegrcnt); val = qib_read_kreg64(dd, kr_sendpiosize); dd->piosize2k = val & ~0U; dd->piosize4k = val >> 32; mtu = ib_mtu_enum_to_int(qib_ibmtu); if (mtu == -1) mtu = QIB_DEFAULT_MTU; dd->pport->ibmtu = (u32)mtu; val = qib_read_kreg64(dd, kr_sendpiobufcnt); dd->piobcnt2k = val & ~0U; dd->piobcnt4k = val >> 32; dd->last_pio = dd->piobcnt4k + dd->piobcnt2k - 1; /* these may be adjusted in init_chip_wc_pat() */ dd->pio2kbase = (u32 __iomem *) (((char __iomem *)dd->kregbase) + dd->pio2k_bufbase); if (dd->piobcnt4k) { dd->pio4kbase = (u32 __iomem *) (((char __iomem *) dd->kregbase) + (dd->piobufbase >> 32)); /* * 4K buffers take 2 pages; we use roundup just to be * paranoid; we calculate it once here, rather than on * ever buf allocate */ dd->align4k = ALIGN(dd->piosize4k, dd->palign); } piobufs = dd->piobcnt4k + dd->piobcnt2k; dd->pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2) / (sizeof(u64) * BITS_PER_BYTE / 2); } /* * The chip base addresses in cspec and cpspec have to be set * after possible init_chip_wc_pat(), rather than in * get_6120_chip_params(), so split out as separate function */ static void set_6120_baseaddrs(struct qib_devdata *dd) { u32 cregbase; cregbase = qib_read_kreg32(dd, kr_counterregbase); dd->cspec->cregbase = (u64 __iomem *) ((char __iomem *) dd->kregbase + cregbase); dd->egrtidbase = (u64 __iomem *) ((char __iomem *) dd->kregbase + dd->rcvegrbase); } /* * Write the final few registers that depend on some of the * init setup. Done late in init, just before bringing up * the serdes. */ static int qib_late_6120_initreg(struct qib_devdata *dd) { int ret = 0; u64 val; qib_write_kreg(dd, kr_rcvhdrentsize, dd->rcvhdrentsize); qib_write_kreg(dd, kr_rcvhdrsize, dd->rcvhdrsize); qib_write_kreg(dd, kr_rcvhdrcnt, dd->rcvhdrcnt); qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys); val = qib_read_kreg64(dd, kr_sendpioavailaddr); if (val != dd->pioavailregs_phys) { qib_dev_err(dd, "Catastrophic software error, SendPIOAvailAddr written as %lx, read back as %llx\n", (unsigned long) dd->pioavailregs_phys, (unsigned long long) val); ret = -EINVAL; } return ret; } static int init_6120_variables(struct qib_devdata *dd) { int ret = 0; struct qib_pportdata *ppd; u32 sbufs; ppd = (struct qib_pportdata *)(dd + 1); dd->pport = ppd; dd->num_pports = 1; dd->cspec = (struct qib_chip_specific *)(ppd + dd->num_pports); dd->cspec->ppd = ppd; ppd->cpspec = NULL; /* not used in this chip */ spin_lock_init(&dd->cspec->kernel_tid_lock); spin_lock_init(&dd->cspec->user_tid_lock); spin_lock_init(&dd->cspec->rcvmod_lock); spin_lock_init(&dd->cspec->gpio_lock); /* we haven't yet set QIB_PRESENT, so use read directly */ dd->revision = readq(&dd->kregbase[kr_revision]); if ((dd->revision & 0xffffffffU) == 0xffffffffU) { qib_dev_err(dd, "Revision register read failure, giving up initialization\n"); ret = -ENODEV; goto bail; } dd->flags |= QIB_PRESENT; /* now register routines work */ dd->majrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMajor); dd->minrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMinor); get_6120_chip_params(dd); pe_boardname(dd); /* fill in boardname */ /* * GPIO bits for TWSI data and clock, * used for serial EEPROM. */ dd->gpio_sda_num = _QIB_GPIO_SDA_NUM; dd->gpio_scl_num = _QIB_GPIO_SCL_NUM; dd->twsi_eeprom_dev = QIB_TWSI_NO_DEV; if (qib_unordered_wc()) dd->flags |= QIB_PIO_FLUSH_WC; ret = qib_init_pportdata(ppd, dd, 0, 1); if (ret) goto bail; ppd->link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X; ppd->link_speed_supported = QIB_IB_SDR; ppd->link_width_enabled = IB_WIDTH_4X; ppd->link_speed_enabled = ppd->link_speed_supported; /* these can't change for this chip, so set once */ ppd->link_width_active = ppd->link_width_enabled; ppd->link_speed_active = ppd->link_speed_enabled; ppd->vls_supported = IB_VL_VL0; ppd->vls_operational = ppd->vls_supported; dd->rcvhdrentsize = QIB_RCVHDR_ENTSIZE; dd->rcvhdrsize = QIB_DFLT_RCVHDRSIZE; dd->rhf_offset = 0; /* we always allocate at least 2048 bytes for eager buffers */ ret = ib_mtu_enum_to_int(qib_ibmtu); dd->rcvegrbufsize = ret != -1 ? max(ret, 2048) : QIB_DEFAULT_MTU; dd->rcvegrbufsize_shift = ilog2(dd->rcvegrbufsize); qib_6120_tidtemplate(dd); /* * We can request a receive interrupt for 1 or * more packets from current offset. For now, we set this * up for a single packet. */ dd->rhdrhead_intr_off = 1ULL << 32; /* setup the stats timer; the add_timer is done at end of init */ timer_setup(&dd->stats_timer, qib_get_6120_faststats, 0); timer_setup(&dd->cspec->pma_timer, pma_6120_timer, 0); dd->ureg_align = qib_read_kreg32(dd, kr_palign); dd->piosize2kmax_dwords = dd->piosize2k >> 2; qib_6120_config_ctxts(dd); qib_set_ctxtcnt(dd); ret = init_chip_wc_pat(dd, 0); if (ret) goto bail; set_6120_baseaddrs(dd); /* set chip access pointers now */ ret = 0; if (qib_mini_init) goto bail; qib_num_cfg_vls = 1; /* if any 6120's, only one VL */ ret = qib_create_ctxts(dd); init_6120_cntrnames(dd); /* use all of 4KB buffers for the kernel, otherwise 16 */ sbufs = dd->piobcnt4k ? dd->piobcnt4k : 16; dd->lastctxt_piobuf = dd->piobcnt2k + dd->piobcnt4k - sbufs; dd->pbufsctxt = dd->lastctxt_piobuf / (dd->cfgctxts - dd->first_user_ctxt); if (ret) goto bail; bail: return ret; } /* * For this chip, we want to use the same buffer every time * when we are trying to bring the link up (they are always VL15 * packets). At that link state the packet should always go out immediately * (or at least be discarded at the tx interface if the link is down). * If it doesn't, and the buffer isn't available, that means some other * sender has gotten ahead of us, and is preventing our packet from going * out. In that case, we flush all packets, and try again. If that still * fails, we fail the request, and hope things work the next time around. * * We don't need very complicated heuristics on whether the packet had * time to go out or not, since even at SDR 1X, it goes out in very short * time periods, covered by the chip reads done here and as part of the * flush. */ static u32 __iomem *get_6120_link_buf(struct qib_pportdata *ppd, u32 *bnum) { u32 __iomem *buf; u32 lbuf = ppd->dd->piobcnt2k + ppd->dd->piobcnt4k - 1; /* * always blip to get avail list updated, since it's almost * always needed, and is fairly cheap. */ sendctrl_6120_mod(ppd->dd->pport, QIB_SENDCTRL_AVAIL_BLIP); qib_read_kreg64(ppd->dd, kr_scratch); /* extra chip flush */ buf = qib_getsendbuf_range(ppd->dd, bnum, lbuf, lbuf); if (buf) goto done; sendctrl_6120_mod(ppd, QIB_SENDCTRL_DISARM_ALL | QIB_SENDCTRL_FLUSH | QIB_SENDCTRL_AVAIL_BLIP); ppd->dd->upd_pio_shadow = 1; /* update our idea of what's busy */ qib_read_kreg64(ppd->dd, kr_scratch); /* extra chip flush */ buf = qib_getsendbuf_range(ppd->dd, bnum, lbuf, lbuf); done: return buf; } static u32 __iomem *qib_6120_getsendbuf(struct qib_pportdata *ppd, u64 pbc, u32 *pbufnum) { u32 first, last, plen = pbc & QIB_PBC_LENGTH_MASK; struct qib_devdata *dd = ppd->dd; u32 __iomem *buf; if (((pbc >> 32) & PBC_6120_VL15_SEND_CTRL) && !(ppd->lflags & (QIBL_IB_AUTONEG_INPROG | QIBL_LINKACTIVE))) buf = get_6120_link_buf(ppd, pbufnum); else { if ((plen + 1) > dd->piosize2kmax_dwords) first = dd->piobcnt2k; else first = 0; /* try 4k if all 2k busy, so same last for both sizes */ last = dd->piobcnt2k + dd->piobcnt4k - 1; buf = qib_getsendbuf_range(dd, pbufnum, first, last); } return buf; } static int init_sdma_6120_regs(struct qib_pportdata *ppd) { return -ENODEV; } static u16 qib_sdma_6120_gethead(struct qib_pportdata *ppd) { return 0; } static int qib_sdma_6120_busy(struct qib_pportdata *ppd) { return 0; } static void qib_sdma_update_6120_tail(struct qib_pportdata *ppd, u16 tail) { } static void qib_6120_sdma_sendctrl(struct qib_pportdata *ppd, unsigned op) { } static void qib_sdma_set_6120_desc_cnt(struct qib_pportdata *ppd, unsigned cnt) { } /* * the pbc doesn't need a VL15 indicator, but we need it for link_buf. * The chip ignores the bit if set. */ static u32 qib_6120_setpbc_control(struct qib_pportdata *ppd, u32 plen, u8 srate, u8 vl) { return vl == 15 ? PBC_6120_VL15_SEND_CTRL : 0; } static void qib_6120_initvl15_bufs(struct qib_devdata *dd) { } static void qib_6120_init_ctxt(struct qib_ctxtdata *rcd) { rcd->rcvegrcnt = rcd->dd->rcvhdrcnt; rcd->rcvegr_tid_base = rcd->ctxt * rcd->rcvegrcnt; } static void qib_6120_txchk_change(struct qib_devdata *dd, u32 start, u32 len, u32 avail, struct qib_ctxtdata *rcd) { } static void writescratch(struct qib_devdata *dd, u32 val) { (void) qib_write_kreg(dd, kr_scratch, val); } static int qib_6120_tempsense_rd(struct qib_devdata *dd, int regnum) { return -ENXIO; } #ifdef CONFIG_INFINIBAND_QIB_DCA static int qib_6120_notify_dca(struct qib_devdata *dd, unsigned long event) { return 0; } #endif /* Dummy function, as 6120 boards never disable EEPROM Write */ static int qib_6120_eeprom_wen(struct qib_devdata *dd, int wen) { return 1; } /** * qib_init_iba6120_funcs - set up the chip-specific function pointers * @pdev: pci_dev of the qlogic_ib device * @ent: pci_device_id matching this chip * * This is global, and is called directly at init to set up the * chip-specific function pointers for later use. * * It also allocates/partially-inits the qib_devdata struct for * this device. */ struct qib_devdata *qib_init_iba6120_funcs(struct pci_dev *pdev, const struct pci_device_id *ent) { struct qib_devdata *dd; int ret; dd = qib_alloc_devdata(pdev, sizeof(struct qib_pportdata) + sizeof(struct qib_chip_specific)); if (IS_ERR(dd)) goto bail; dd->f_bringup_serdes = qib_6120_bringup_serdes; dd->f_cleanup = qib_6120_setup_cleanup; dd->f_clear_tids = qib_6120_clear_tids; dd->f_free_irq = qib_free_irq; dd->f_get_base_info = qib_6120_get_base_info; dd->f_get_msgheader = qib_6120_get_msgheader; dd->f_getsendbuf = qib_6120_getsendbuf; dd->f_gpio_mod = gpio_6120_mod; dd->f_eeprom_wen = qib_6120_eeprom_wen; dd->f_hdrqempty = qib_6120_hdrqempty; dd->f_ib_updown = qib_6120_ib_updown; dd->f_init_ctxt = qib_6120_init_ctxt; dd->f_initvl15_bufs = qib_6120_initvl15_bufs; dd->f_intr_fallback = qib_6120_nointr_fallback; dd->f_late_initreg = qib_late_6120_initreg; dd->f_setpbc_control = qib_6120_setpbc_control; dd->f_portcntr = qib_portcntr_6120; dd->f_put_tid = (dd->minrev >= 2) ? qib_6120_put_tid_2 : qib_6120_put_tid; dd->f_quiet_serdes = qib_6120_quiet_serdes; dd->f_rcvctrl = rcvctrl_6120_mod; dd->f_read_cntrs = qib_read_6120cntrs; dd->f_read_portcntrs = qib_read_6120portcntrs; dd->f_reset = qib_6120_setup_reset; dd->f_init_sdma_regs = init_sdma_6120_regs; dd->f_sdma_busy = qib_sdma_6120_busy; dd->f_sdma_gethead = qib_sdma_6120_gethead; dd->f_sdma_sendctrl = qib_6120_sdma_sendctrl; dd->f_sdma_set_desc_cnt = qib_sdma_set_6120_desc_cnt; dd->f_sdma_update_tail = qib_sdma_update_6120_tail; dd->f_sendctrl = sendctrl_6120_mod; dd->f_set_armlaunch = qib_set_6120_armlaunch; dd->f_set_cntr_sample = qib_set_cntr_6120_sample; dd->f_iblink_state = qib_6120_iblink_state; dd->f_ibphys_portstate = qib_6120_phys_portstate; dd->f_get_ib_cfg = qib_6120_get_ib_cfg; dd->f_set_ib_cfg = qib_6120_set_ib_cfg; dd->f_set_ib_loopback = qib_6120_set_loopback; dd->f_set_intr_state = qib_6120_set_intr_state; dd->f_setextled = qib_6120_setup_setextled; dd->f_txchk_change = qib_6120_txchk_change; dd->f_update_usrhead = qib_update_6120_usrhead; dd->f_wantpiobuf_intr = qib_wantpiobuf_6120_intr; dd->f_xgxs_reset = qib_6120_xgxs_reset; dd->f_writescratch = writescratch; dd->f_tempsense_rd = qib_6120_tempsense_rd; #ifdef CONFIG_INFINIBAND_QIB_DCA dd->f_notify_dca = qib_6120_notify_dca; #endif /* * Do remaining pcie setup and save pcie values in dd. * Any error printing is already done by the init code. * On return, we have the chip mapped and accessible, * but chip registers are not set up until start of * init_6120_variables. */ ret = qib_pcie_ddinit(dd, pdev, ent); if (ret < 0) goto bail_free; /* initialize chip-specific variables */ ret = init_6120_variables(dd); if (ret) goto bail_cleanup; if (qib_mini_init) goto bail; if (qib_pcie_params(dd, 8, NULL)) qib_dev_err(dd, "Failed to setup PCIe or interrupts; continuing anyway\n"); /* clear diagctrl register, in case diags were running and crashed */ qib_write_kreg(dd, kr_hwdiagctrl, 0); if (qib_read_kreg64(dd, kr_hwerrstatus) & QLOGIC_IB_HWE_SERDESPLLFAILED) qib_write_kreg(dd, kr_hwerrclear, QLOGIC_IB_HWE_SERDESPLLFAILED); /* setup interrupt handler (interrupt type handled above) */ qib_setup_6120_interrupt(dd); /* Note that qpn_mask is set by qib_6120_config_ctxts() first */ qib_6120_init_hwerrors(dd); goto bail; bail_cleanup: qib_pcie_ddcleanup(dd); bail_free: qib_free_devdata(dd); dd = ERR_PTR(ret); bail: return dd; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1