Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Danilo Krummrich | 1814 | 99.29% | 1 | 25.00% |
Dmitry Torokhov | 11 | 0.60% | 2 | 50.00% |
Thomas Gleixner | 2 | 0.11% | 1 | 25.00% |
Total | 1827 | 4 |
// SPDX-License-Identifier: GPL-2.0-only /* * GPIO based serio bus driver for bit banging the PS/2 protocol * * Author: Danilo Krummrich <danilokrummrich@dk-develop.de> */ #include <linux/gpio/consumer.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/serio.h> #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/workqueue.h> #include <linux/completion.h> #include <linux/mutex.h> #include <linux/preempt.h> #include <linux/property.h> #include <linux/of.h> #include <linux/jiffies.h> #include <linux/delay.h> #define DRIVER_NAME "ps2-gpio" #define PS2_MODE_RX 0 #define PS2_MODE_TX 1 #define PS2_START_BIT 0 #define PS2_DATA_BIT0 1 #define PS2_DATA_BIT1 2 #define PS2_DATA_BIT2 3 #define PS2_DATA_BIT3 4 #define PS2_DATA_BIT4 5 #define PS2_DATA_BIT5 6 #define PS2_DATA_BIT6 7 #define PS2_DATA_BIT7 8 #define PS2_PARITY_BIT 9 #define PS2_STOP_BIT 10 #define PS2_TX_TIMEOUT 11 #define PS2_ACK_BIT 12 #define PS2_DEV_RET_ACK 0xfa #define PS2_DEV_RET_NACK 0xfe #define PS2_CMD_RESEND 0xfe struct ps2_gpio_data { struct device *dev; struct serio *serio; unsigned char mode; struct gpio_desc *gpio_clk; struct gpio_desc *gpio_data; bool write_enable; int irq; unsigned char rx_cnt; unsigned char rx_byte; unsigned char tx_cnt; unsigned char tx_byte; struct completion tx_done; struct mutex tx_mutex; struct delayed_work tx_work; }; static int ps2_gpio_open(struct serio *serio) { struct ps2_gpio_data *drvdata = serio->port_data; enable_irq(drvdata->irq); return 0; } static void ps2_gpio_close(struct serio *serio) { struct ps2_gpio_data *drvdata = serio->port_data; flush_delayed_work(&drvdata->tx_work); disable_irq(drvdata->irq); } static int __ps2_gpio_write(struct serio *serio, unsigned char val) { struct ps2_gpio_data *drvdata = serio->port_data; disable_irq_nosync(drvdata->irq); gpiod_direction_output(drvdata->gpio_clk, 0); drvdata->mode = PS2_MODE_TX; drvdata->tx_byte = val; schedule_delayed_work(&drvdata->tx_work, usecs_to_jiffies(200)); return 0; } static int ps2_gpio_write(struct serio *serio, unsigned char val) { struct ps2_gpio_data *drvdata = serio->port_data; int ret = 0; if (in_task()) { mutex_lock(&drvdata->tx_mutex); __ps2_gpio_write(serio, val); if (!wait_for_completion_timeout(&drvdata->tx_done, msecs_to_jiffies(10000))) ret = SERIO_TIMEOUT; mutex_unlock(&drvdata->tx_mutex); } else { __ps2_gpio_write(serio, val); } return ret; } static void ps2_gpio_tx_work_fn(struct work_struct *work) { struct delayed_work *dwork = to_delayed_work(work); struct ps2_gpio_data *drvdata = container_of(dwork, struct ps2_gpio_data, tx_work); enable_irq(drvdata->irq); gpiod_direction_output(drvdata->gpio_data, 0); gpiod_direction_input(drvdata->gpio_clk); } static irqreturn_t ps2_gpio_irq_rx(struct ps2_gpio_data *drvdata) { unsigned char byte, cnt; int data; int rxflags = 0; static unsigned long old_jiffies; byte = drvdata->rx_byte; cnt = drvdata->rx_cnt; if (old_jiffies == 0) old_jiffies = jiffies; if ((jiffies - old_jiffies) > usecs_to_jiffies(100)) { dev_err(drvdata->dev, "RX: timeout, probably we missed an interrupt\n"); goto err; } old_jiffies = jiffies; data = gpiod_get_value(drvdata->gpio_data); if (unlikely(data < 0)) { dev_err(drvdata->dev, "RX: failed to get data gpio val: %d\n", data); goto err; } switch (cnt) { case PS2_START_BIT: /* start bit should be low */ if (unlikely(data)) { dev_err(drvdata->dev, "RX: start bit should be low\n"); goto err; } break; case PS2_DATA_BIT0: case PS2_DATA_BIT1: case PS2_DATA_BIT2: case PS2_DATA_BIT3: case PS2_DATA_BIT4: case PS2_DATA_BIT5: case PS2_DATA_BIT6: case PS2_DATA_BIT7: /* processing data bits */ if (data) byte |= (data << (cnt - 1)); break; case PS2_PARITY_BIT: /* check odd parity */ if (!((hweight8(byte) & 1) ^ data)) { rxflags |= SERIO_PARITY; dev_warn(drvdata->dev, "RX: parity error\n"); if (!drvdata->write_enable) goto err; } /* Do not send spurious ACK's and NACK's when write fn is * not provided. */ if (!drvdata->write_enable) { if (byte == PS2_DEV_RET_NACK) goto err; else if (byte == PS2_DEV_RET_ACK) break; } /* Let's send the data without waiting for the stop bit to be * sent. It may happen that we miss the stop bit. When this * happens we have no way to recover from this, certainly * missing the parity bit would be recognized when processing * the stop bit. When missing both, data is lost. */ serio_interrupt(drvdata->serio, byte, rxflags); dev_dbg(drvdata->dev, "RX: sending byte 0x%x\n", byte); break; case PS2_STOP_BIT: /* stop bit should be high */ if (unlikely(!data)) { dev_err(drvdata->dev, "RX: stop bit should be high\n"); goto err; } cnt = byte = 0; old_jiffies = 0; goto end; /* success */ default: dev_err(drvdata->dev, "RX: got out of sync with the device\n"); goto err; } cnt++; goto end; /* success */ err: cnt = byte = 0; old_jiffies = 0; __ps2_gpio_write(drvdata->serio, PS2_CMD_RESEND); end: drvdata->rx_cnt = cnt; drvdata->rx_byte = byte; return IRQ_HANDLED; } static irqreturn_t ps2_gpio_irq_tx(struct ps2_gpio_data *drvdata) { unsigned char byte, cnt; int data; static unsigned long old_jiffies; cnt = drvdata->tx_cnt; byte = drvdata->tx_byte; if (old_jiffies == 0) old_jiffies = jiffies; if ((jiffies - old_jiffies) > usecs_to_jiffies(100)) { dev_err(drvdata->dev, "TX: timeout, probably we missed an interrupt\n"); goto err; } old_jiffies = jiffies; switch (cnt) { case PS2_START_BIT: /* should never happen */ dev_err(drvdata->dev, "TX: start bit should have been sent already\n"); goto err; case PS2_DATA_BIT0: case PS2_DATA_BIT1: case PS2_DATA_BIT2: case PS2_DATA_BIT3: case PS2_DATA_BIT4: case PS2_DATA_BIT5: case PS2_DATA_BIT6: case PS2_DATA_BIT7: data = byte & BIT(cnt - 1); gpiod_set_value(drvdata->gpio_data, data); break; case PS2_PARITY_BIT: /* do odd parity */ data = !(hweight8(byte) & 1); gpiod_set_value(drvdata->gpio_data, data); break; case PS2_STOP_BIT: /* release data line to generate stop bit */ gpiod_direction_input(drvdata->gpio_data); break; case PS2_TX_TIMEOUT: /* Devices generate one extra clock pulse before sending the * acknowledgment. */ break; case PS2_ACK_BIT: gpiod_direction_input(drvdata->gpio_data); data = gpiod_get_value(drvdata->gpio_data); if (data) { dev_warn(drvdata->dev, "TX: received NACK, retry\n"); goto err; } drvdata->mode = PS2_MODE_RX; complete(&drvdata->tx_done); cnt = 1; old_jiffies = 0; goto end; /* success */ default: /* Probably we missed the stop bit. Therefore we release data * line and try again. */ gpiod_direction_input(drvdata->gpio_data); dev_err(drvdata->dev, "TX: got out of sync with the device\n"); goto err; } cnt++; goto end; /* success */ err: cnt = 1; old_jiffies = 0; gpiod_direction_input(drvdata->gpio_data); __ps2_gpio_write(drvdata->serio, drvdata->tx_byte); end: drvdata->tx_cnt = cnt; return IRQ_HANDLED; } static irqreturn_t ps2_gpio_irq(int irq, void *dev_id) { struct ps2_gpio_data *drvdata = dev_id; return drvdata->mode ? ps2_gpio_irq_tx(drvdata) : ps2_gpio_irq_rx(drvdata); } static int ps2_gpio_get_props(struct device *dev, struct ps2_gpio_data *drvdata) { drvdata->gpio_data = devm_gpiod_get(dev, "data", GPIOD_IN); if (IS_ERR(drvdata->gpio_data)) { dev_err(dev, "failed to request data gpio: %ld", PTR_ERR(drvdata->gpio_data)); return PTR_ERR(drvdata->gpio_data); } drvdata->gpio_clk = devm_gpiod_get(dev, "clk", GPIOD_IN); if (IS_ERR(drvdata->gpio_clk)) { dev_err(dev, "failed to request clock gpio: %ld", PTR_ERR(drvdata->gpio_clk)); return PTR_ERR(drvdata->gpio_clk); } drvdata->write_enable = device_property_read_bool(dev, "write-enable"); return 0; } static int ps2_gpio_probe(struct platform_device *pdev) { struct ps2_gpio_data *drvdata; struct serio *serio; struct device *dev = &pdev->dev; int error; drvdata = devm_kzalloc(dev, sizeof(struct ps2_gpio_data), GFP_KERNEL); serio = kzalloc(sizeof(struct serio), GFP_KERNEL); if (!drvdata || !serio) { error = -ENOMEM; goto err_free_serio; } error = ps2_gpio_get_props(dev, drvdata); if (error) goto err_free_serio; if (gpiod_cansleep(drvdata->gpio_data) || gpiod_cansleep(drvdata->gpio_clk)) { dev_err(dev, "GPIO data or clk are connected via slow bus\n"); error = -EINVAL; goto err_free_serio; } drvdata->irq = platform_get_irq(pdev, 0); if (drvdata->irq < 0) { dev_err(dev, "failed to get irq from platform resource: %d\n", drvdata->irq); error = drvdata->irq; goto err_free_serio; } error = devm_request_irq(dev, drvdata->irq, ps2_gpio_irq, IRQF_NO_THREAD, DRIVER_NAME, drvdata); if (error) { dev_err(dev, "failed to request irq %d: %d\n", drvdata->irq, error); goto err_free_serio; } /* Keep irq disabled until serio->open is called. */ disable_irq(drvdata->irq); serio->id.type = SERIO_8042; serio->open = ps2_gpio_open; serio->close = ps2_gpio_close; /* Write can be enabled in platform/dt data, but possibly it will not * work because of the tough timings. */ serio->write = drvdata->write_enable ? ps2_gpio_write : NULL; serio->port_data = drvdata; serio->dev.parent = dev; strlcpy(serio->name, dev_name(dev), sizeof(serio->name)); strlcpy(serio->phys, dev_name(dev), sizeof(serio->phys)); drvdata->serio = serio; drvdata->dev = dev; drvdata->mode = PS2_MODE_RX; /* Tx count always starts at 1, as the start bit is sent implicitly by * host-to-device communication initialization. */ drvdata->tx_cnt = 1; INIT_DELAYED_WORK(&drvdata->tx_work, ps2_gpio_tx_work_fn); init_completion(&drvdata->tx_done); mutex_init(&drvdata->tx_mutex); serio_register_port(serio); platform_set_drvdata(pdev, drvdata); return 0; /* success */ err_free_serio: kfree(serio); return error; } static int ps2_gpio_remove(struct platform_device *pdev) { struct ps2_gpio_data *drvdata = platform_get_drvdata(pdev); serio_unregister_port(drvdata->serio); return 0; } #if defined(CONFIG_OF) static const struct of_device_id ps2_gpio_match[] = { { .compatible = "ps2-gpio", }, { }, }; MODULE_DEVICE_TABLE(of, ps2_gpio_match); #endif static struct platform_driver ps2_gpio_driver = { .probe = ps2_gpio_probe, .remove = ps2_gpio_remove, .driver = { .name = DRIVER_NAME, .of_match_table = of_match_ptr(ps2_gpio_match), }, }; module_platform_driver(ps2_gpio_driver); MODULE_AUTHOR("Danilo Krummrich <danilokrummrich@dk-develop.de>"); MODULE_DESCRIPTION("GPIO PS2 driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1