Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Sakari Ailus | 1840 | 80.00% | 1 | 5.26% |
Pavel Machek | 382 | 16.61% | 2 | 10.53% |
Andy Shevchenko | 42 | 1.83% | 3 | 15.79% |
Vladimir Zapolskiy | 9 | 0.39% | 1 | 5.26% |
Laurent Pinchart | 6 | 0.26% | 1 | 5.26% |
Mauro Carvalho Chehab | 4 | 0.17% | 4 | 21.05% |
Arnd Bergmann | 4 | 0.17% | 1 | 5.26% |
Paul Gortmaker | 3 | 0.13% | 1 | 5.26% |
Hans Verkuil | 3 | 0.13% | 1 | 5.26% |
Thomas Gleixner | 2 | 0.09% | 1 | 5.26% |
Uwe Kleine-König | 2 | 0.09% | 1 | 5.26% |
Axel Lin | 2 | 0.09% | 1 | 5.26% |
Anton Protopopov | 1 | 0.04% | 1 | 5.26% |
Total | 2300 | 19 |
// SPDX-License-Identifier: GPL-2.0-only /* * drivers/media/i2c/adp1653.c * * Copyright (C) 2008--2011 Nokia Corporation * * Contact: Sakari Ailus <sakari.ailus@iki.fi> * * Contributors: * Sakari Ailus <sakari.ailus@iki.fi> * Tuukka Toivonen <tuukkat76@gmail.com> * Pavel Machek <pavel@ucw.cz> * * TODO: * - fault interrupt handling * - hardware strobe * - power doesn't need to be ON if all lights are off */ #include <linux/delay.h> #include <linux/module.h> #include <linux/i2c.h> #include <linux/slab.h> #include <linux/of.h> #include <linux/gpio/consumer.h> #include <media/i2c/adp1653.h> #include <media/v4l2-device.h> #define TIMEOUT_MAX 820000 #define TIMEOUT_STEP 54600 #define TIMEOUT_MIN (TIMEOUT_MAX - ADP1653_REG_CONFIG_TMR_SET_MAX \ * TIMEOUT_STEP) #define TIMEOUT_US_TO_CODE(t) ((TIMEOUT_MAX + (TIMEOUT_STEP / 2) - (t)) \ / TIMEOUT_STEP) #define TIMEOUT_CODE_TO_US(c) (TIMEOUT_MAX - (c) * TIMEOUT_STEP) /* Write values into ADP1653 registers. */ static int adp1653_update_hw(struct adp1653_flash *flash) { struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); u8 out_sel; u8 config = 0; int rval; out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG( flash->indicator_intensity->val) << ADP1653_REG_OUT_SEL_ILED_SHIFT; switch (flash->led_mode->val) { case V4L2_FLASH_LED_MODE_NONE: break; case V4L2_FLASH_LED_MODE_FLASH: /* Flash mode, light on with strobe, duration from timer */ config = ADP1653_REG_CONFIG_TMR_CFG; config |= TIMEOUT_US_TO_CODE(flash->flash_timeout->val) << ADP1653_REG_CONFIG_TMR_SET_SHIFT; break; case V4L2_FLASH_LED_MODE_TORCH: /* Torch mode, light immediately on, duration indefinite */ out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG( flash->torch_intensity->val) << ADP1653_REG_OUT_SEL_HPLED_SHIFT; break; } rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel); if (rval < 0) return rval; rval = i2c_smbus_write_byte_data(client, ADP1653_REG_CONFIG, config); if (rval < 0) return rval; return 0; } static int adp1653_get_fault(struct adp1653_flash *flash) { struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); int fault; int rval; fault = i2c_smbus_read_byte_data(client, ADP1653_REG_FAULT); if (fault < 0) return fault; flash->fault |= fault; if (!flash->fault) return 0; /* Clear faults. */ rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0); if (rval < 0) return rval; flash->led_mode->val = V4L2_FLASH_LED_MODE_NONE; rval = adp1653_update_hw(flash); if (rval) return rval; return flash->fault; } static int adp1653_strobe(struct adp1653_flash *flash, int enable) { struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); u8 out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG( flash->indicator_intensity->val) << ADP1653_REG_OUT_SEL_ILED_SHIFT; int rval; if (flash->led_mode->val != V4L2_FLASH_LED_MODE_FLASH) return -EBUSY; if (!enable) return i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel); out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG( flash->flash_intensity->val) << ADP1653_REG_OUT_SEL_HPLED_SHIFT; rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel); if (rval) return rval; /* Software strobe using i2c */ rval = i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE, ADP1653_REG_SW_STROBE_SW_STROBE); if (rval) return rval; return i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE, 0); } /* -------------------------------------------------------------------------- * V4L2 controls */ static int adp1653_get_ctrl(struct v4l2_ctrl *ctrl) { struct adp1653_flash *flash = container_of(ctrl->handler, struct adp1653_flash, ctrls); int rval; rval = adp1653_get_fault(flash); if (rval) return rval; ctrl->cur.val = 0; if (flash->fault & ADP1653_REG_FAULT_FLT_SCP) ctrl->cur.val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT; if (flash->fault & ADP1653_REG_FAULT_FLT_OT) ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE; if (flash->fault & ADP1653_REG_FAULT_FLT_TMR) ctrl->cur.val |= V4L2_FLASH_FAULT_TIMEOUT; if (flash->fault & ADP1653_REG_FAULT_FLT_OV) ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_VOLTAGE; flash->fault = 0; return 0; } static int adp1653_set_ctrl(struct v4l2_ctrl *ctrl) { struct adp1653_flash *flash = container_of(ctrl->handler, struct adp1653_flash, ctrls); int rval; rval = adp1653_get_fault(flash); if (rval) return rval; if ((rval & (ADP1653_REG_FAULT_FLT_SCP | ADP1653_REG_FAULT_FLT_OT | ADP1653_REG_FAULT_FLT_OV)) && (ctrl->id == V4L2_CID_FLASH_STROBE || ctrl->id == V4L2_CID_FLASH_TORCH_INTENSITY || ctrl->id == V4L2_CID_FLASH_LED_MODE)) return -EBUSY; switch (ctrl->id) { case V4L2_CID_FLASH_STROBE: return adp1653_strobe(flash, 1); case V4L2_CID_FLASH_STROBE_STOP: return adp1653_strobe(flash, 0); } return adp1653_update_hw(flash); } static const struct v4l2_ctrl_ops adp1653_ctrl_ops = { .g_volatile_ctrl = adp1653_get_ctrl, .s_ctrl = adp1653_set_ctrl, }; static int adp1653_init_controls(struct adp1653_flash *flash) { struct v4l2_ctrl *fault; v4l2_ctrl_handler_init(&flash->ctrls, 9); flash->led_mode = v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops, V4L2_CID_FLASH_LED_MODE, V4L2_FLASH_LED_MODE_TORCH, ~0x7, 0); v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops, V4L2_CID_FLASH_STROBE_SOURCE, V4L2_FLASH_STROBE_SOURCE_SOFTWARE, ~0x1, 0); v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, V4L2_CID_FLASH_STROBE, 0, 0, 0, 0); v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0); flash->flash_timeout = v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, V4L2_CID_FLASH_TIMEOUT, TIMEOUT_MIN, flash->platform_data->max_flash_timeout, TIMEOUT_STEP, flash->platform_data->max_flash_timeout); flash->flash_intensity = v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, V4L2_CID_FLASH_INTENSITY, ADP1653_FLASH_INTENSITY_MIN, flash->platform_data->max_flash_intensity, 1, flash->platform_data->max_flash_intensity); flash->torch_intensity = v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, V4L2_CID_FLASH_TORCH_INTENSITY, ADP1653_TORCH_INTENSITY_MIN, flash->platform_data->max_torch_intensity, ADP1653_FLASH_INTENSITY_STEP, flash->platform_data->max_torch_intensity); flash->indicator_intensity = v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, V4L2_CID_FLASH_INDICATOR_INTENSITY, ADP1653_INDICATOR_INTENSITY_MIN, flash->platform_data->max_indicator_intensity, ADP1653_INDICATOR_INTENSITY_STEP, ADP1653_INDICATOR_INTENSITY_MIN); fault = v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, V4L2_CID_FLASH_FAULT, 0, V4L2_FLASH_FAULT_OVER_VOLTAGE | V4L2_FLASH_FAULT_OVER_TEMPERATURE | V4L2_FLASH_FAULT_SHORT_CIRCUIT, 0, 0); if (flash->ctrls.error) return flash->ctrls.error; fault->flags |= V4L2_CTRL_FLAG_VOLATILE; flash->subdev.ctrl_handler = &flash->ctrls; return 0; } /* -------------------------------------------------------------------------- * V4L2 subdev operations */ static int adp1653_init_device(struct adp1653_flash *flash) { struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); int rval; /* Clear FAULT register by writing zero to OUT_SEL */ rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0); if (rval < 0) { dev_err(&client->dev, "failed writing fault register\n"); return -EIO; } mutex_lock(flash->ctrls.lock); /* Reset faults before reading new ones. */ flash->fault = 0; rval = adp1653_get_fault(flash); mutex_unlock(flash->ctrls.lock); if (rval > 0) { dev_err(&client->dev, "faults detected: 0x%1.1x\n", rval); return -EIO; } mutex_lock(flash->ctrls.lock); rval = adp1653_update_hw(flash); mutex_unlock(flash->ctrls.lock); if (rval) { dev_err(&client->dev, "adp1653_update_hw failed at %s\n", __func__); return -EIO; } return 0; } static int __adp1653_set_power(struct adp1653_flash *flash, int on) { int ret; if (flash->platform_data->power) { ret = flash->platform_data->power(&flash->subdev, on); if (ret < 0) return ret; } else { gpiod_set_value(flash->platform_data->enable_gpio, on); if (on) /* Some delay is apparently required. */ udelay(20); } if (!on) return 0; ret = adp1653_init_device(flash); if (ret >= 0) return ret; if (flash->platform_data->power) flash->platform_data->power(&flash->subdev, 0); else gpiod_set_value(flash->platform_data->enable_gpio, 0); return ret; } static int adp1653_set_power(struct v4l2_subdev *subdev, int on) { struct adp1653_flash *flash = to_adp1653_flash(subdev); int ret = 0; mutex_lock(&flash->power_lock); /* If the power count is modified from 0 to != 0 or from != 0 to 0, * update the power state. */ if (flash->power_count == !on) { ret = __adp1653_set_power(flash, !!on); if (ret < 0) goto done; } /* Update the power count. */ flash->power_count += on ? 1 : -1; WARN_ON(flash->power_count < 0); done: mutex_unlock(&flash->power_lock); return ret; } static int adp1653_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) { return adp1653_set_power(sd, 1); } static int adp1653_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) { return adp1653_set_power(sd, 0); } static const struct v4l2_subdev_core_ops adp1653_core_ops = { .s_power = adp1653_set_power, }; static const struct v4l2_subdev_ops adp1653_ops = { .core = &adp1653_core_ops, }; static const struct v4l2_subdev_internal_ops adp1653_internal_ops = { .open = adp1653_open, .close = adp1653_close, }; /* -------------------------------------------------------------------------- * I2C driver */ #ifdef CONFIG_PM static int adp1653_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct v4l2_subdev *subdev = i2c_get_clientdata(client); struct adp1653_flash *flash = to_adp1653_flash(subdev); if (!flash->power_count) return 0; return __adp1653_set_power(flash, 0); } static int adp1653_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct v4l2_subdev *subdev = i2c_get_clientdata(client); struct adp1653_flash *flash = to_adp1653_flash(subdev); if (!flash->power_count) return 0; return __adp1653_set_power(flash, 1); } #else #define adp1653_suspend NULL #define adp1653_resume NULL #endif /* CONFIG_PM */ static int adp1653_of_init(struct i2c_client *client, struct adp1653_flash *flash, struct device_node *node) { struct adp1653_platform_data *pd; struct device_node *child; pd = devm_kzalloc(&client->dev, sizeof(*pd), GFP_KERNEL); if (!pd) return -ENOMEM; flash->platform_data = pd; child = of_get_child_by_name(node, "flash"); if (!child) return -EINVAL; if (of_property_read_u32(child, "flash-timeout-us", &pd->max_flash_timeout)) goto err; if (of_property_read_u32(child, "flash-max-microamp", &pd->max_flash_intensity)) goto err; pd->max_flash_intensity /= 1000; if (of_property_read_u32(child, "led-max-microamp", &pd->max_torch_intensity)) goto err; pd->max_torch_intensity /= 1000; of_node_put(child); child = of_get_child_by_name(node, "indicator"); if (!child) return -EINVAL; if (of_property_read_u32(child, "led-max-microamp", &pd->max_indicator_intensity)) goto err; of_node_put(child); pd->enable_gpio = devm_gpiod_get(&client->dev, "enable", GPIOD_OUT_LOW); if (IS_ERR(pd->enable_gpio)) { dev_err(&client->dev, "Error getting GPIO\n"); return PTR_ERR(pd->enable_gpio); } return 0; err: dev_err(&client->dev, "Required property not found\n"); of_node_put(child); return -EINVAL; } static int adp1653_probe(struct i2c_client *client, const struct i2c_device_id *devid) { struct adp1653_flash *flash; int ret; flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL); if (flash == NULL) return -ENOMEM; if (client->dev.of_node) { ret = adp1653_of_init(client, flash, client->dev.of_node); if (ret) return ret; } else { if (!client->dev.platform_data) { dev_err(&client->dev, "Neither DT not platform data provided\n"); return -EINVAL; } flash->platform_data = client->dev.platform_data; } mutex_init(&flash->power_lock); v4l2_i2c_subdev_init(&flash->subdev, client, &adp1653_ops); flash->subdev.internal_ops = &adp1653_internal_ops; flash->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; ret = adp1653_init_controls(flash); if (ret) goto free_and_quit; ret = media_entity_pads_init(&flash->subdev.entity, 0, NULL); if (ret < 0) goto free_and_quit; flash->subdev.entity.function = MEDIA_ENT_F_FLASH; return 0; free_and_quit: dev_err(&client->dev, "adp1653: failed to register device\n"); v4l2_ctrl_handler_free(&flash->ctrls); return ret; } static int adp1653_remove(struct i2c_client *client) { struct v4l2_subdev *subdev = i2c_get_clientdata(client); struct adp1653_flash *flash = to_adp1653_flash(subdev); v4l2_device_unregister_subdev(&flash->subdev); v4l2_ctrl_handler_free(&flash->ctrls); media_entity_cleanup(&flash->subdev.entity); return 0; } static const struct i2c_device_id adp1653_id_table[] = { { ADP1653_NAME, 0 }, { } }; MODULE_DEVICE_TABLE(i2c, adp1653_id_table); static const struct dev_pm_ops adp1653_pm_ops = { .suspend = adp1653_suspend, .resume = adp1653_resume, }; static struct i2c_driver adp1653_i2c_driver = { .driver = { .name = ADP1653_NAME, .pm = &adp1653_pm_ops, }, .probe = adp1653_probe, .remove = adp1653_remove, .id_table = adp1653_id_table, }; module_i2c_driver(adp1653_i2c_driver); MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>"); MODULE_DESCRIPTION("Analog Devices ADP1653 LED flash driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1