Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Helen Mae Koike Fornazier | 268 | 90.85% | 10 | 66.67% |
Hans Verkuil | 24 | 8.14% | 3 | 20.00% |
Thomas Gleixner | 2 | 0.68% | 1 | 6.67% |
Lucas A. M. Magalhães | 1 | 0.34% | 1 | 6.67% |
Total | 295 | 15 |
/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * vimc-common.h Virtual Media Controller Driver * * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com> */ #ifndef _VIMC_COMMON_H_ #define _VIMC_COMMON_H_ #include <linux/slab.h> #include <media/media-device.h> #include <media/v4l2-device.h> #include "vimc-streamer.h" #define VIMC_PDEV_NAME "vimc" /* VIMC-specific controls */ #define VIMC_CID_VIMC_BASE (0x00f00000 | 0xf000) #define VIMC_CID_VIMC_CLASS (0x00f00000 | 1) #define VIMC_CID_TEST_PATTERN (VIMC_CID_VIMC_BASE + 0) #define VIMC_FRAME_MAX_WIDTH 4096 #define VIMC_FRAME_MAX_HEIGHT 2160 #define VIMC_FRAME_MIN_WIDTH 16 #define VIMC_FRAME_MIN_HEIGHT 16 #define VIMC_FRAME_INDEX(lin, col, width, bpp) ((lin * width + col) * bpp) /** * struct vimc_colorimetry_clamp - Adjust colorimetry parameters * * @fmt: the pointer to struct v4l2_pix_format or * struct v4l2_mbus_framefmt * * Entities must check if colorimetry given by the userspace is valid, if not * then set them as DEFAULT */ #define vimc_colorimetry_clamp(fmt) \ do { \ if ((fmt)->colorspace == V4L2_COLORSPACE_DEFAULT \ || (fmt)->colorspace > V4L2_COLORSPACE_DCI_P3) { \ (fmt)->colorspace = V4L2_COLORSPACE_DEFAULT; \ (fmt)->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; \ (fmt)->quantization = V4L2_QUANTIZATION_DEFAULT; \ (fmt)->xfer_func = V4L2_XFER_FUNC_DEFAULT; \ } \ if ((fmt)->ycbcr_enc > V4L2_YCBCR_ENC_SMPTE240M) \ (fmt)->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; \ if ((fmt)->quantization > V4L2_QUANTIZATION_LIM_RANGE) \ (fmt)->quantization = V4L2_QUANTIZATION_DEFAULT; \ if ((fmt)->xfer_func > V4L2_XFER_FUNC_SMPTE2084) \ (fmt)->xfer_func = V4L2_XFER_FUNC_DEFAULT; \ } while (0) /** * struct vimc_platform_data - platform data to components * * @entity_name: The name of the entity to be created * * Board setup code will often provide additional information using the device's * platform_data field to hold additional information. * When injecting a new platform_device in the component system the core needs * to provide to the corresponding submodules the name of the entity that should * be used when registering the subdevice in the Media Controller system. */ struct vimc_platform_data { char entity_name[32]; }; /** * struct vimc_ent_device - core struct that represents a node in the topology * * @ent: the pointer to struct media_entity for the node * @pads: the list of pads of the node * @process_frame: callback send a frame to that node * @vdev_get_format: callback that returns the current format a pad, used * only when is_media_entity_v4l2_video_device(ent) returns * true * * Each node of the topology must create a vimc_ent_device struct. Depending on * the node it will be of an instance of v4l2_subdev or video_device struct * where both contains a struct media_entity. * Those structures should embedded the vimc_ent_device struct through * v4l2_set_subdevdata() and video_set_drvdata() respectivaly, allowing the * vimc_ent_device struct to be retrieved from the corresponding struct * media_entity */ struct vimc_ent_device { struct media_entity *ent; struct media_pad *pads; struct vimc_stream *stream; void * (*process_frame)(struct vimc_ent_device *ved, const void *frame); void (*vdev_get_format)(struct vimc_ent_device *ved, struct v4l2_pix_format *fmt); }; /** * vimc_mbus_code_supported - helper to check supported mbus codes * * Helper function to check if mbus code is enumerated by vimc_enum_mbus_code() */ bool vimc_mbus_code_supported(__u32 code); /** * vimc_enum_mbus_code - enumerate mbus codes * * Helper function to be pluged in .enum_mbus_code from * struct v4l2_subdev_pad_ops. */ int vimc_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_mbus_code_enum *code); /** * vimc_pads_init - initialize pads * * @num_pads: number of pads to initialize * @pads_flags: flags to use in each pad * * Helper functions to allocate/initialize pads */ struct media_pad *vimc_pads_init(u16 num_pads, const unsigned long *pads_flag); /** * vimc_pads_cleanup - free pads * * @pads: pointer to the pads * * Helper function to free the pads initialized with vimc_pads_init */ static inline void vimc_pads_cleanup(struct media_pad *pads) { kfree(pads); } /** * vimc_pipeline_s_stream - start stream through the pipeline * * @ent: the pointer to struct media_entity for the node * @enable: 1 to start the stream and 0 to stop * * Helper function to call the s_stream of the subdevices connected * in all the sink pads of the entity */ int vimc_pipeline_s_stream(struct media_entity *ent, int enable); /** * vimc_ent_sd_register - initialize and register a subdev node * * @ved: the vimc_ent_device struct to be initialize * @sd: the v4l2_subdev struct to be initialize and registered * @v4l2_dev: the v4l2 device to register the v4l2_subdev * @name: name of the sub-device. Please notice that the name must be * unique. * @function: media entity function defined by MEDIA_ENT_F_* macros * @num_pads: number of pads to initialize * @pads_flag: flags to use in each pad * @sd_int_ops: pointer to &struct v4l2_subdev_internal_ops * @sd_ops: pointer to &struct v4l2_subdev_ops. * * Helper function initialize and register the struct vimc_ent_device and struct * v4l2_subdev which represents a subdev node in the topology */ int vimc_ent_sd_register(struct vimc_ent_device *ved, struct v4l2_subdev *sd, struct v4l2_device *v4l2_dev, const char *const name, u32 function, u16 num_pads, const unsigned long *pads_flag, const struct v4l2_subdev_internal_ops *sd_int_ops, const struct v4l2_subdev_ops *sd_ops); /** * vimc_ent_sd_unregister - cleanup and unregister a subdev node * * @ved: the vimc_ent_device struct to be cleaned up * @sd: the v4l2_subdev struct to be unregistered * * Helper function cleanup and unregister the struct vimc_ent_device and struct * v4l2_subdev which represents a subdev node in the topology */ void vimc_ent_sd_unregister(struct vimc_ent_device *ved, struct v4l2_subdev *sd); /** * vimc_link_validate - validates a media link * * @link: pointer to &struct media_link * * This function calls validates if a media link is valid for streaming. */ int vimc_link_validate(struct media_link *link); #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1