Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Kieran Bingham | 2040 | 56.48% | 18 | 47.37% |
Laurent Pinchart | 1211 | 33.53% | 17 | 44.74% |
Takashi Saito | 357 | 9.88% | 1 | 2.63% |
Mauro Carvalho Chehab | 4 | 0.11% | 2 | 5.26% |
Total | 3612 | 38 |
// SPDX-License-Identifier: GPL-2.0+ /* * vsp1_dl.c -- R-Car VSP1 Display List * * Copyright (C) 2015 Renesas Corporation * * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) */ #include <linux/device.h> #include <linux/dma-mapping.h> #include <linux/gfp.h> #include <linux/refcount.h> #include <linux/slab.h> #include <linux/workqueue.h> #include "vsp1.h" #include "vsp1_dl.h" #define VSP1_DL_NUM_ENTRIES 256 #define VSP1_DLH_INT_ENABLE (1 << 1) #define VSP1_DLH_AUTO_START (1 << 0) #define VSP1_DLH_EXT_PRE_CMD_EXEC (1 << 9) #define VSP1_DLH_EXT_POST_CMD_EXEC (1 << 8) struct vsp1_dl_header_list { u32 num_bytes; u32 addr; } __packed; struct vsp1_dl_header { u32 num_lists; struct vsp1_dl_header_list lists[8]; u32 next_header; u32 flags; } __packed; /** * struct vsp1_dl_ext_header - Extended display list header * @padding: padding zero bytes for alignment * @pre_ext_dl_num_cmd: number of pre-extended command bodies to parse * @flags: enables or disables execution of the pre and post command * @pre_ext_dl_plist: start address of pre-extended display list bodies * @post_ext_dl_num_cmd: number of post-extended command bodies to parse * @post_ext_dl_plist: start address of post-extended display list bodies */ struct vsp1_dl_ext_header { u32 padding; /* * The datasheet represents flags as stored before pre_ext_dl_num_cmd, * expecting 32-bit accesses. The flags are appropriate to the whole * header, not just the pre_ext command, and thus warrant being * separated out. Due to byte ordering, and representing as 16 bit * values here, the flags must be positioned after the * pre_ext_dl_num_cmd. */ u16 pre_ext_dl_num_cmd; u16 flags; u32 pre_ext_dl_plist; u32 post_ext_dl_num_cmd; u32 post_ext_dl_plist; } __packed; struct vsp1_dl_header_extended { struct vsp1_dl_header header; struct vsp1_dl_ext_header ext; } __packed; struct vsp1_dl_entry { u32 addr; u32 data; } __packed; /** * struct vsp1_pre_ext_dl_body - Pre Extended Display List Body * @opcode: Extended display list command operation code * @flags: Pre-extended command flags. These are specific to each command * @address_set: Source address set pointer. Must have 16-byte alignment * @reserved: Zero bits for alignment. */ struct vsp1_pre_ext_dl_body { u32 opcode; u32 flags; u32 address_set; u32 reserved; } __packed; /** * struct vsp1_dl_body - Display list body * @list: entry in the display list list of bodies * @free: entry in the pool free body list * @refcnt: reference tracking for the body * @pool: pool to which this body belongs * @entries: array of entries * @dma: DMA address of the entries * @size: size of the DMA memory in bytes * @num_entries: number of stored entries * @max_entries: number of entries available */ struct vsp1_dl_body { struct list_head list; struct list_head free; refcount_t refcnt; struct vsp1_dl_body_pool *pool; struct vsp1_dl_entry *entries; dma_addr_t dma; size_t size; unsigned int num_entries; unsigned int max_entries; }; /** * struct vsp1_dl_body_pool - display list body pool * @dma: DMA address of the entries * @size: size of the full DMA memory pool in bytes * @mem: CPU memory pointer for the pool * @bodies: Array of DLB structures for the pool * @free: List of free DLB entries * @lock: Protects the free list * @vsp1: the VSP1 device */ struct vsp1_dl_body_pool { /* DMA allocation */ dma_addr_t dma; size_t size; void *mem; /* Body management */ struct vsp1_dl_body *bodies; struct list_head free; spinlock_t lock; struct vsp1_device *vsp1; }; /** * struct vsp1_cmd_pool - Display List commands pool * @dma: DMA address of the entries * @size: size of the full DMA memory pool in bytes * @mem: CPU memory pointer for the pool * @cmds: Array of command structures for the pool * @free: Free pool entries * @lock: Protects the free list * @vsp1: the VSP1 device */ struct vsp1_dl_cmd_pool { /* DMA allocation */ dma_addr_t dma; size_t size; void *mem; struct vsp1_dl_ext_cmd *cmds; struct list_head free; spinlock_t lock; struct vsp1_device *vsp1; }; /** * struct vsp1_dl_list - Display list * @list: entry in the display list manager lists * @dlm: the display list manager * @header: display list header * @extension: extended display list header. NULL for normal lists * @dma: DMA address for the header * @body0: first display list body * @bodies: list of extra display list bodies * @pre_cmd: pre command to be issued through extended dl header * @post_cmd: post command to be issued through extended dl header * @has_chain: if true, indicates that there's a partition chain * @chain: entry in the display list partition chain * @flags: display list flags, a combination of VSP1_DL_FRAME_END_* */ struct vsp1_dl_list { struct list_head list; struct vsp1_dl_manager *dlm; struct vsp1_dl_header *header; struct vsp1_dl_ext_header *extension; dma_addr_t dma; struct vsp1_dl_body *body0; struct list_head bodies; struct vsp1_dl_ext_cmd *pre_cmd; struct vsp1_dl_ext_cmd *post_cmd; bool has_chain; struct list_head chain; unsigned int flags; }; /** * struct vsp1_dl_manager - Display List manager * @index: index of the related WPF * @singleshot: execute the display list in single-shot mode * @vsp1: the VSP1 device * @lock: protects the free, active, queued, and pending lists * @free: array of all free display lists * @active: list currently being processed (loaded) by hardware * @queued: list queued to the hardware (written to the DL registers) * @pending: list waiting to be queued to the hardware * @pool: body pool for the display list bodies * @cmdpool: commands pool for extended display list */ struct vsp1_dl_manager { unsigned int index; bool singleshot; struct vsp1_device *vsp1; spinlock_t lock; struct list_head free; struct vsp1_dl_list *active; struct vsp1_dl_list *queued; struct vsp1_dl_list *pending; struct vsp1_dl_body_pool *pool; struct vsp1_dl_cmd_pool *cmdpool; }; /* ----------------------------------------------------------------------------- * Display List Body Management */ /** * vsp1_dl_body_pool_create - Create a pool of bodies from a single allocation * @vsp1: The VSP1 device * @num_bodies: The number of bodies to allocate * @num_entries: The maximum number of entries that a body can contain * @extra_size: Extra allocation provided for the bodies * * Allocate a pool of display list bodies each with enough memory to contain the * requested number of entries plus the @extra_size. * * Return a pointer to a pool on success or NULL if memory can't be allocated. */ struct vsp1_dl_body_pool * vsp1_dl_body_pool_create(struct vsp1_device *vsp1, unsigned int num_bodies, unsigned int num_entries, size_t extra_size) { struct vsp1_dl_body_pool *pool; size_t dlb_size; unsigned int i; pool = kzalloc(sizeof(*pool), GFP_KERNEL); if (!pool) return NULL; pool->vsp1 = vsp1; /* * TODO: 'extra_size' is only used by vsp1_dlm_create(), to allocate * extra memory for the display list header. We need only one header per * display list, not per display list body, thus this allocation is * extraneous and should be reworked in the future. */ dlb_size = num_entries * sizeof(struct vsp1_dl_entry) + extra_size; pool->size = dlb_size * num_bodies; pool->bodies = kcalloc(num_bodies, sizeof(*pool->bodies), GFP_KERNEL); if (!pool->bodies) { kfree(pool); return NULL; } pool->mem = dma_alloc_wc(vsp1->bus_master, pool->size, &pool->dma, GFP_KERNEL); if (!pool->mem) { kfree(pool->bodies); kfree(pool); return NULL; } spin_lock_init(&pool->lock); INIT_LIST_HEAD(&pool->free); for (i = 0; i < num_bodies; ++i) { struct vsp1_dl_body *dlb = &pool->bodies[i]; dlb->pool = pool; dlb->max_entries = num_entries; dlb->dma = pool->dma + i * dlb_size; dlb->entries = pool->mem + i * dlb_size; list_add_tail(&dlb->free, &pool->free); } return pool; } /** * vsp1_dl_body_pool_destroy - Release a body pool * @pool: The body pool * * Release all components of a pool allocation. */ void vsp1_dl_body_pool_destroy(struct vsp1_dl_body_pool *pool) { if (!pool) return; if (pool->mem) dma_free_wc(pool->vsp1->bus_master, pool->size, pool->mem, pool->dma); kfree(pool->bodies); kfree(pool); } /** * vsp1_dl_body_get - Obtain a body from a pool * @pool: The body pool * * Obtain a body from the pool without blocking. * * Returns a display list body or NULL if there are none available. */ struct vsp1_dl_body *vsp1_dl_body_get(struct vsp1_dl_body_pool *pool) { struct vsp1_dl_body *dlb = NULL; unsigned long flags; spin_lock_irqsave(&pool->lock, flags); if (!list_empty(&pool->free)) { dlb = list_first_entry(&pool->free, struct vsp1_dl_body, free); list_del(&dlb->free); refcount_set(&dlb->refcnt, 1); } spin_unlock_irqrestore(&pool->lock, flags); return dlb; } /** * vsp1_dl_body_put - Return a body back to its pool * @dlb: The display list body * * Return a body back to the pool, and reset the num_entries to clear the list. */ void vsp1_dl_body_put(struct vsp1_dl_body *dlb) { unsigned long flags; if (!dlb) return; if (!refcount_dec_and_test(&dlb->refcnt)) return; dlb->num_entries = 0; spin_lock_irqsave(&dlb->pool->lock, flags); list_add_tail(&dlb->free, &dlb->pool->free); spin_unlock_irqrestore(&dlb->pool->lock, flags); } /** * vsp1_dl_body_write - Write a register to a display list body * @dlb: The body * @reg: The register address * @data: The register value * * Write the given register and value to the display list body. The maximum * number of entries that can be written in a body is specified when the body is * allocated by vsp1_dl_body_alloc(). */ void vsp1_dl_body_write(struct vsp1_dl_body *dlb, u32 reg, u32 data) { if (WARN_ONCE(dlb->num_entries >= dlb->max_entries, "DLB size exceeded (max %u)", dlb->max_entries)) return; dlb->entries[dlb->num_entries].addr = reg; dlb->entries[dlb->num_entries].data = data; dlb->num_entries++; } /* ----------------------------------------------------------------------------- * Display List Extended Command Management */ enum vsp1_extcmd_type { VSP1_EXTCMD_AUTODISP, VSP1_EXTCMD_AUTOFLD, }; struct vsp1_extended_command_info { u16 opcode; size_t body_size; }; static const struct vsp1_extended_command_info vsp1_extended_commands[] = { [VSP1_EXTCMD_AUTODISP] = { 0x02, 96 }, [VSP1_EXTCMD_AUTOFLD] = { 0x03, 160 }, }; /** * vsp1_dl_cmd_pool_create - Create a pool of commands from a single allocation * @vsp1: The VSP1 device * @type: The command pool type * @num_cmds: The number of commands to allocate * * Allocate a pool of commands each with enough memory to contain the private * data of each command. The allocation sizes are dependent upon the command * type. * * Return a pointer to the pool on success or NULL if memory can't be allocated. */ static struct vsp1_dl_cmd_pool * vsp1_dl_cmd_pool_create(struct vsp1_device *vsp1, enum vsp1_extcmd_type type, unsigned int num_cmds) { struct vsp1_dl_cmd_pool *pool; unsigned int i; size_t cmd_size; pool = kzalloc(sizeof(*pool), GFP_KERNEL); if (!pool) return NULL; spin_lock_init(&pool->lock); INIT_LIST_HEAD(&pool->free); pool->cmds = kcalloc(num_cmds, sizeof(*pool->cmds), GFP_KERNEL); if (!pool->cmds) { kfree(pool); return NULL; } cmd_size = sizeof(struct vsp1_pre_ext_dl_body) + vsp1_extended_commands[type].body_size; cmd_size = ALIGN(cmd_size, 16); pool->size = cmd_size * num_cmds; pool->mem = dma_alloc_wc(vsp1->bus_master, pool->size, &pool->dma, GFP_KERNEL); if (!pool->mem) { kfree(pool->cmds); kfree(pool); return NULL; } for (i = 0; i < num_cmds; ++i) { struct vsp1_dl_ext_cmd *cmd = &pool->cmds[i]; size_t cmd_offset = i * cmd_size; /* data_offset must be 16 byte aligned for DMA. */ size_t data_offset = sizeof(struct vsp1_pre_ext_dl_body) + cmd_offset; cmd->pool = pool; cmd->opcode = vsp1_extended_commands[type].opcode; /* * TODO: Auto-disp can utilise more than one extended body * command per cmd. */ cmd->num_cmds = 1; cmd->cmds = pool->mem + cmd_offset; cmd->cmd_dma = pool->dma + cmd_offset; cmd->data = pool->mem + data_offset; cmd->data_dma = pool->dma + data_offset; list_add_tail(&cmd->free, &pool->free); } return pool; } static struct vsp1_dl_ext_cmd *vsp1_dl_ext_cmd_get(struct vsp1_dl_cmd_pool *pool) { struct vsp1_dl_ext_cmd *cmd = NULL; unsigned long flags; spin_lock_irqsave(&pool->lock, flags); if (!list_empty(&pool->free)) { cmd = list_first_entry(&pool->free, struct vsp1_dl_ext_cmd, free); list_del(&cmd->free); } spin_unlock_irqrestore(&pool->lock, flags); return cmd; } static void vsp1_dl_ext_cmd_put(struct vsp1_dl_ext_cmd *cmd) { unsigned long flags; if (!cmd) return; /* Reset flags, these mark data usage. */ cmd->flags = 0; spin_lock_irqsave(&cmd->pool->lock, flags); list_add_tail(&cmd->free, &cmd->pool->free); spin_unlock_irqrestore(&cmd->pool->lock, flags); } static void vsp1_dl_ext_cmd_pool_destroy(struct vsp1_dl_cmd_pool *pool) { if (!pool) return; if (pool->mem) dma_free_wc(pool->vsp1->bus_master, pool->size, pool->mem, pool->dma); kfree(pool->cmds); kfree(pool); } struct vsp1_dl_ext_cmd *vsp1_dl_get_pre_cmd(struct vsp1_dl_list *dl) { struct vsp1_dl_manager *dlm = dl->dlm; if (dl->pre_cmd) return dl->pre_cmd; dl->pre_cmd = vsp1_dl_ext_cmd_get(dlm->cmdpool); return dl->pre_cmd; } /* ---------------------------------------------------------------------------- * Display List Transaction Management */ static struct vsp1_dl_list *vsp1_dl_list_alloc(struct vsp1_dl_manager *dlm) { struct vsp1_dl_list *dl; size_t header_offset; dl = kzalloc(sizeof(*dl), GFP_KERNEL); if (!dl) return NULL; INIT_LIST_HEAD(&dl->bodies); dl->dlm = dlm; /* Get a default body for our list. */ dl->body0 = vsp1_dl_body_get(dlm->pool); if (!dl->body0) return NULL; header_offset = dl->body0->max_entries * sizeof(*dl->body0->entries); dl->header = ((void *)dl->body0->entries) + header_offset; dl->dma = dl->body0->dma + header_offset; memset(dl->header, 0, sizeof(*dl->header)); dl->header->lists[0].addr = dl->body0->dma; return dl; } static void vsp1_dl_list_bodies_put(struct vsp1_dl_list *dl) { struct vsp1_dl_body *dlb, *tmp; list_for_each_entry_safe(dlb, tmp, &dl->bodies, list) { list_del(&dlb->list); vsp1_dl_body_put(dlb); } } static void vsp1_dl_list_free(struct vsp1_dl_list *dl) { vsp1_dl_body_put(dl->body0); vsp1_dl_list_bodies_put(dl); kfree(dl); } /** * vsp1_dl_list_get - Get a free display list * @dlm: The display list manager * * Get a display list from the pool of free lists and return it. * * This function must be called without the display list manager lock held. */ struct vsp1_dl_list *vsp1_dl_list_get(struct vsp1_dl_manager *dlm) { struct vsp1_dl_list *dl = NULL; unsigned long flags; spin_lock_irqsave(&dlm->lock, flags); if (!list_empty(&dlm->free)) { dl = list_first_entry(&dlm->free, struct vsp1_dl_list, list); list_del(&dl->list); /* * The display list chain must be initialised to ensure every * display list can assert list_empty() if it is not in a chain. */ INIT_LIST_HEAD(&dl->chain); } spin_unlock_irqrestore(&dlm->lock, flags); return dl; } /* This function must be called with the display list manager lock held.*/ static void __vsp1_dl_list_put(struct vsp1_dl_list *dl) { struct vsp1_dl_list *dl_next; if (!dl) return; /* * Release any linked display-lists which were chained for a single * hardware operation. */ if (dl->has_chain) { list_for_each_entry(dl_next, &dl->chain, chain) __vsp1_dl_list_put(dl_next); } dl->has_chain = false; vsp1_dl_list_bodies_put(dl); vsp1_dl_ext_cmd_put(dl->pre_cmd); vsp1_dl_ext_cmd_put(dl->post_cmd); dl->pre_cmd = NULL; dl->post_cmd = NULL; /* * body0 is reused as as an optimisation as presently every display list * has at least one body, thus we reinitialise the entries list. */ dl->body0->num_entries = 0; list_add_tail(&dl->list, &dl->dlm->free); } /** * vsp1_dl_list_put - Release a display list * @dl: The display list * * Release the display list and return it to the pool of free lists. * * Passing a NULL pointer to this function is safe, in that case no operation * will be performed. */ void vsp1_dl_list_put(struct vsp1_dl_list *dl) { unsigned long flags; if (!dl) return; spin_lock_irqsave(&dl->dlm->lock, flags); __vsp1_dl_list_put(dl); spin_unlock_irqrestore(&dl->dlm->lock, flags); } /** * vsp1_dl_list_get_body0 - Obtain the default body for the display list * @dl: The display list * * Obtain a pointer to the internal display list body allowing this to be passed * directly to configure operations. */ struct vsp1_dl_body *vsp1_dl_list_get_body0(struct vsp1_dl_list *dl) { return dl->body0; } /** * vsp1_dl_list_add_body - Add a body to the display list * @dl: The display list * @dlb: The body * * Add a display list body to a display list. Registers contained in bodies are * processed after registers contained in the main display list, in the order in * which bodies are added. * * Adding a body to a display list passes ownership of the body to the list. The * caller retains its reference to the body when adding it to the display list, * but is not allowed to add new entries to the body. * * The reference must be explicitly released by a call to vsp1_dl_body_put() * when the body isn't needed anymore. */ int vsp1_dl_list_add_body(struct vsp1_dl_list *dl, struct vsp1_dl_body *dlb) { refcount_inc(&dlb->refcnt); list_add_tail(&dlb->list, &dl->bodies); return 0; } /** * vsp1_dl_list_add_chain - Add a display list to a chain * @head: The head display list * @dl: The new display list * * Add a display list to an existing display list chain. The chained lists * will be automatically processed by the hardware without intervention from * the CPU. A display list end interrupt will only complete after the last * display list in the chain has completed processing. * * Adding a display list to a chain passes ownership of the display list to * the head display list item. The chain is released when the head dl item is * put back with __vsp1_dl_list_put(). */ int vsp1_dl_list_add_chain(struct vsp1_dl_list *head, struct vsp1_dl_list *dl) { head->has_chain = true; list_add_tail(&dl->chain, &head->chain); return 0; } static void vsp1_dl_ext_cmd_fill_header(struct vsp1_dl_ext_cmd *cmd) { cmd->cmds[0].opcode = cmd->opcode; cmd->cmds[0].flags = cmd->flags; cmd->cmds[0].address_set = cmd->data_dma; cmd->cmds[0].reserved = 0; } static void vsp1_dl_list_fill_header(struct vsp1_dl_list *dl, bool is_last) { struct vsp1_dl_manager *dlm = dl->dlm; struct vsp1_dl_header_list *hdr = dl->header->lists; struct vsp1_dl_body *dlb; unsigned int num_lists = 0; /* * Fill the header with the display list bodies addresses and sizes. The * address of the first body has already been filled when the display * list was allocated. */ hdr->num_bytes = dl->body0->num_entries * sizeof(*dl->header->lists); list_for_each_entry(dlb, &dl->bodies, list) { num_lists++; hdr++; hdr->addr = dlb->dma; hdr->num_bytes = dlb->num_entries * sizeof(*dl->header->lists); } dl->header->num_lists = num_lists; dl->header->flags = 0; /* * Enable the interrupt for the end of each frame. In continuous mode * chained lists are used with one list per frame, so enable the * interrupt for each list. In singleshot mode chained lists are used * to partition a single frame, so enable the interrupt for the last * list only. */ if (!dlm->singleshot || is_last) dl->header->flags |= VSP1_DLH_INT_ENABLE; /* * In continuous mode enable auto-start for all lists, as the VSP must * loop on the same list until a new one is queued. In singleshot mode * enable auto-start for all lists but the last to chain processing of * partitions without software intervention. */ if (!dlm->singleshot || !is_last) dl->header->flags |= VSP1_DLH_AUTO_START; if (!is_last) { /* * If this is not the last display list in the chain, queue the * next item for automatic processing by the hardware. */ struct vsp1_dl_list *next = list_next_entry(dl, chain); dl->header->next_header = next->dma; } else if (!dlm->singleshot) { /* * if the display list manager works in continuous mode, the VSP * should loop over the display list continuously until * instructed to do otherwise. */ dl->header->next_header = dl->dma; } if (!dl->extension) return; dl->extension->flags = 0; if (dl->pre_cmd) { dl->extension->pre_ext_dl_plist = dl->pre_cmd->cmd_dma; dl->extension->pre_ext_dl_num_cmd = dl->pre_cmd->num_cmds; dl->extension->flags |= VSP1_DLH_EXT_PRE_CMD_EXEC; vsp1_dl_ext_cmd_fill_header(dl->pre_cmd); } if (dl->post_cmd) { dl->extension->post_ext_dl_plist = dl->post_cmd->cmd_dma; dl->extension->post_ext_dl_num_cmd = dl->post_cmd->num_cmds; dl->extension->flags |= VSP1_DLH_EXT_POST_CMD_EXEC; vsp1_dl_ext_cmd_fill_header(dl->post_cmd); } } static bool vsp1_dl_list_hw_update_pending(struct vsp1_dl_manager *dlm) { struct vsp1_device *vsp1 = dlm->vsp1; if (!dlm->queued) return false; /* * Check whether the VSP1 has taken the update. The hardware indicates * this by clearing the UPDHDR bit in the CMD register. */ return !!(vsp1_read(vsp1, VI6_CMD(dlm->index)) & VI6_CMD_UPDHDR); } static void vsp1_dl_list_hw_enqueue(struct vsp1_dl_list *dl) { struct vsp1_dl_manager *dlm = dl->dlm; struct vsp1_device *vsp1 = dlm->vsp1; /* * Program the display list header address. If the hardware is idle * (single-shot mode or first frame in continuous mode) it will then be * started independently. If the hardware is operating, the * VI6_DL_HDR_REF_ADDR register will be updated with the display list * address. */ vsp1_write(vsp1, VI6_DL_HDR_ADDR(dlm->index), dl->dma); } static void vsp1_dl_list_commit_continuous(struct vsp1_dl_list *dl) { struct vsp1_dl_manager *dlm = dl->dlm; /* * If a previous display list has been queued to the hardware but not * processed yet, the VSP can start processing it at any time. In that * case we can't replace the queued list by the new one, as we could * race with the hardware. We thus mark the update as pending, it will * be queued up to the hardware by the frame end interrupt handler. * * If a display list is already pending we simply drop it as the new * display list is assumed to contain a more recent configuration. It is * an error if the already pending list has the * VSP1_DL_FRAME_END_INTERNAL flag set, as there is then a process * waiting for that list to complete. This shouldn't happen as the * waiting process should perform proper locking, but warn just in * case. */ if (vsp1_dl_list_hw_update_pending(dlm)) { WARN_ON(dlm->pending && (dlm->pending->flags & VSP1_DL_FRAME_END_INTERNAL)); __vsp1_dl_list_put(dlm->pending); dlm->pending = dl; return; } /* * Pass the new display list to the hardware and mark it as queued. It * will become active when the hardware starts processing it. */ vsp1_dl_list_hw_enqueue(dl); __vsp1_dl_list_put(dlm->queued); dlm->queued = dl; } static void vsp1_dl_list_commit_singleshot(struct vsp1_dl_list *dl) { struct vsp1_dl_manager *dlm = dl->dlm; /* * When working in single-shot mode, the caller guarantees that the * hardware is idle at this point. Just commit the head display list * to hardware. Chained lists will be started automatically. */ vsp1_dl_list_hw_enqueue(dl); dlm->active = dl; } void vsp1_dl_list_commit(struct vsp1_dl_list *dl, unsigned int dl_flags) { struct vsp1_dl_manager *dlm = dl->dlm; struct vsp1_dl_list *dl_next; unsigned long flags; /* Fill the header for the head and chained display lists. */ vsp1_dl_list_fill_header(dl, list_empty(&dl->chain)); list_for_each_entry(dl_next, &dl->chain, chain) { bool last = list_is_last(&dl_next->chain, &dl->chain); vsp1_dl_list_fill_header(dl_next, last); } dl->flags = dl_flags & ~VSP1_DL_FRAME_END_COMPLETED; spin_lock_irqsave(&dlm->lock, flags); if (dlm->singleshot) vsp1_dl_list_commit_singleshot(dl); else vsp1_dl_list_commit_continuous(dl); spin_unlock_irqrestore(&dlm->lock, flags); } /* ----------------------------------------------------------------------------- * Display List Manager */ /** * vsp1_dlm_irq_frame_end - Display list handler for the frame end interrupt * @dlm: the display list manager * * Return a set of flags that indicates display list completion status. * * The VSP1_DL_FRAME_END_COMPLETED flag indicates that the previous display list * has completed at frame end. If the flag is not returned display list * completion has been delayed by one frame because the display list commit * raced with the frame end interrupt. The function always returns with the flag * set in single-shot mode as display list processing is then not continuous and * races never occur. * * The following flags are only supported for continuous mode. * * The VSP1_DL_FRAME_END_INTERNAL flag indicates that the display list that just * became active had been queued with the internal notification flag. * * The VSP1_DL_FRAME_END_WRITEBACK flag indicates that the previously active * display list had been queued with the writeback flag. */ unsigned int vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm) { struct vsp1_device *vsp1 = dlm->vsp1; u32 status = vsp1_read(vsp1, VI6_STATUS); unsigned int flags = 0; spin_lock(&dlm->lock); /* * The mem-to-mem pipelines work in single-shot mode. No new display * list can be queued, we don't have to do anything. */ if (dlm->singleshot) { __vsp1_dl_list_put(dlm->active); dlm->active = NULL; flags |= VSP1_DL_FRAME_END_COMPLETED; goto done; } /* * If the commit operation raced with the interrupt and occurred after * the frame end event but before interrupt processing, the hardware * hasn't taken the update into account yet. We have to skip one frame * and retry. */ if (vsp1_dl_list_hw_update_pending(dlm)) goto done; /* * Progressive streams report only TOP fields. If we have a BOTTOM * field, we are interlaced, and expect the frame to complete on the * next frame end interrupt. */ if (status & VI6_STATUS_FLD_STD(dlm->index)) goto done; /* * If the active display list has the writeback flag set, the frame * completion marks the end of the writeback capture. Return the * VSP1_DL_FRAME_END_WRITEBACK flag and reset the display list's * writeback flag. */ if (dlm->active && (dlm->active->flags & VSP1_DL_FRAME_END_WRITEBACK)) { flags |= VSP1_DL_FRAME_END_WRITEBACK; dlm->active->flags &= ~VSP1_DL_FRAME_END_WRITEBACK; } /* * The device starts processing the queued display list right after the * frame end interrupt. The display list thus becomes active. */ if (dlm->queued) { if (dlm->queued->flags & VSP1_DL_FRAME_END_INTERNAL) flags |= VSP1_DL_FRAME_END_INTERNAL; dlm->queued->flags &= ~VSP1_DL_FRAME_END_INTERNAL; __vsp1_dl_list_put(dlm->active); dlm->active = dlm->queued; dlm->queued = NULL; flags |= VSP1_DL_FRAME_END_COMPLETED; } /* * Now that the VSP has started processing the queued display list, we * can queue the pending display list to the hardware if one has been * prepared. */ if (dlm->pending) { vsp1_dl_list_hw_enqueue(dlm->pending); dlm->queued = dlm->pending; dlm->pending = NULL; } done: spin_unlock(&dlm->lock); return flags; } /* Hardware Setup */ void vsp1_dlm_setup(struct vsp1_device *vsp1) { unsigned int i; u32 ctrl = (256 << VI6_DL_CTRL_AR_WAIT_SHIFT) | VI6_DL_CTRL_DC2 | VI6_DL_CTRL_DC1 | VI6_DL_CTRL_DC0 | VI6_DL_CTRL_DLE; u32 ext_dl = (0x02 << VI6_DL_EXT_CTRL_POLINT_SHIFT) | VI6_DL_EXT_CTRL_DLPRI | VI6_DL_EXT_CTRL_EXT; if (vsp1_feature(vsp1, VSP1_HAS_EXT_DL)) { for (i = 0; i < vsp1->info->wpf_count; ++i) vsp1_write(vsp1, VI6_DL_EXT_CTRL(i), ext_dl); } vsp1_write(vsp1, VI6_DL_CTRL, ctrl); vsp1_write(vsp1, VI6_DL_SWAP, VI6_DL_SWAP_LWS); } void vsp1_dlm_reset(struct vsp1_dl_manager *dlm) { unsigned long flags; spin_lock_irqsave(&dlm->lock, flags); __vsp1_dl_list_put(dlm->active); __vsp1_dl_list_put(dlm->queued); __vsp1_dl_list_put(dlm->pending); spin_unlock_irqrestore(&dlm->lock, flags); dlm->active = NULL; dlm->queued = NULL; dlm->pending = NULL; } struct vsp1_dl_body *vsp1_dlm_dl_body_get(struct vsp1_dl_manager *dlm) { return vsp1_dl_body_get(dlm->pool); } struct vsp1_dl_manager *vsp1_dlm_create(struct vsp1_device *vsp1, unsigned int index, unsigned int prealloc) { struct vsp1_dl_manager *dlm; size_t header_size; unsigned int i; dlm = devm_kzalloc(vsp1->dev, sizeof(*dlm), GFP_KERNEL); if (!dlm) return NULL; dlm->index = index; dlm->singleshot = vsp1->info->uapi; dlm->vsp1 = vsp1; spin_lock_init(&dlm->lock); INIT_LIST_HEAD(&dlm->free); /* * Initialize the display list body and allocate DMA memory for the body * and the header. Both are allocated together to avoid memory * fragmentation, with the header located right after the body in * memory. An extra body is allocated on top of the prealloc to account * for the cached body used by the vsp1_pipeline object. */ header_size = vsp1_feature(vsp1, VSP1_HAS_EXT_DL) ? sizeof(struct vsp1_dl_header_extended) : sizeof(struct vsp1_dl_header); header_size = ALIGN(header_size, 8); dlm->pool = vsp1_dl_body_pool_create(vsp1, prealloc + 1, VSP1_DL_NUM_ENTRIES, header_size); if (!dlm->pool) return NULL; for (i = 0; i < prealloc; ++i) { struct vsp1_dl_list *dl; dl = vsp1_dl_list_alloc(dlm); if (!dl) { vsp1_dlm_destroy(dlm); return NULL; } /* The extended header immediately follows the header. */ if (vsp1_feature(vsp1, VSP1_HAS_EXT_DL)) dl->extension = (void *)dl->header + sizeof(*dl->header); list_add_tail(&dl->list, &dlm->free); } if (vsp1_feature(vsp1, VSP1_HAS_EXT_DL)) { dlm->cmdpool = vsp1_dl_cmd_pool_create(vsp1, VSP1_EXTCMD_AUTOFLD, prealloc); if (!dlm->cmdpool) { vsp1_dlm_destroy(dlm); return NULL; } } return dlm; } void vsp1_dlm_destroy(struct vsp1_dl_manager *dlm) { struct vsp1_dl_list *dl, *next; if (!dlm) return; list_for_each_entry_safe(dl, next, &dlm->free, list) { list_del(&dl->list); vsp1_dl_list_free(dl); } vsp1_dl_body_pool_destroy(dlm->pool); vsp1_dl_ext_cmd_pool_destroy(dlm->cmdpool); }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1