Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Vincent Yang | 991 | 88.09% | 1 | 14.29% |
Ard Biesheuvel | 125 | 11.11% | 2 | 28.57% |
Axel Lin | 3 | 0.27% | 1 | 14.29% |
Ulf Hansson | 2 | 0.18% | 1 | 14.29% |
Thomas Gleixner | 2 | 0.18% | 1 | 14.29% |
Fengguang Wu | 2 | 0.18% | 1 | 14.29% |
Total | 1125 | 7 |
// SPDX-License-Identifier: GPL-2.0-only /* * linux/drivers/mmc/host/sdhci_f_sdh30.c * * Copyright (C) 2013 - 2015 Fujitsu Semiconductor, Ltd * Vincent Yang <vincent.yang@tw.fujitsu.com> * Copyright (C) 2015 Linaro Ltd Andy Green <andy.green@linaro.org> */ #include <linux/acpi.h> #include <linux/err.h> #include <linux/delay.h> #include <linux/module.h> #include <linux/of.h> #include <linux/property.h> #include <linux/clk.h> #include "sdhci-pltfm.h" /* F_SDH30 extended Controller registers */ #define F_SDH30_AHB_CONFIG 0x100 #define F_SDH30_AHB_BIGED 0x00000040 #define F_SDH30_BUSLOCK_DMA 0x00000020 #define F_SDH30_BUSLOCK_EN 0x00000010 #define F_SDH30_SIN 0x00000008 #define F_SDH30_AHB_INCR_16 0x00000004 #define F_SDH30_AHB_INCR_8 0x00000002 #define F_SDH30_AHB_INCR_4 0x00000001 #define F_SDH30_TUNING_SETTING 0x108 #define F_SDH30_CMD_CHK_DIS 0x00010000 #define F_SDH30_IO_CONTROL2 0x114 #define F_SDH30_CRES_O_DN 0x00080000 #define F_SDH30_MSEL_O_1_8 0x00040000 #define F_SDH30_ESD_CONTROL 0x124 #define F_SDH30_EMMC_RST 0x00000002 #define F_SDH30_EMMC_HS200 0x01000000 #define F_SDH30_CMD_DAT_DELAY 0x200 #define F_SDH30_MIN_CLOCK 400000 struct f_sdhost_priv { struct clk *clk_iface; struct clk *clk; u32 vendor_hs200; struct device *dev; bool enable_cmd_dat_delay; }; static void sdhci_f_sdh30_soft_voltage_switch(struct sdhci_host *host) { struct f_sdhost_priv *priv = sdhci_priv(host); u32 ctrl = 0; usleep_range(2500, 3000); ctrl = sdhci_readl(host, F_SDH30_IO_CONTROL2); ctrl |= F_SDH30_CRES_O_DN; sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2); ctrl |= F_SDH30_MSEL_O_1_8; sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2); ctrl &= ~F_SDH30_CRES_O_DN; sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2); usleep_range(2500, 3000); if (priv->vendor_hs200) { dev_info(priv->dev, "%s: setting hs200\n", __func__); ctrl = sdhci_readl(host, F_SDH30_ESD_CONTROL); ctrl |= priv->vendor_hs200; sdhci_writel(host, ctrl, F_SDH30_ESD_CONTROL); } ctrl = sdhci_readl(host, F_SDH30_TUNING_SETTING); ctrl |= F_SDH30_CMD_CHK_DIS; sdhci_writel(host, ctrl, F_SDH30_TUNING_SETTING); } static unsigned int sdhci_f_sdh30_get_min_clock(struct sdhci_host *host) { return F_SDH30_MIN_CLOCK; } static void sdhci_f_sdh30_reset(struct sdhci_host *host, u8 mask) { struct f_sdhost_priv *priv = sdhci_priv(host); u32 ctl; if (sdhci_readw(host, SDHCI_CLOCK_CONTROL) == 0) sdhci_writew(host, 0xBC01, SDHCI_CLOCK_CONTROL); sdhci_reset(host, mask); if (priv->enable_cmd_dat_delay) { ctl = sdhci_readl(host, F_SDH30_ESD_CONTROL); ctl |= F_SDH30_CMD_DAT_DELAY; sdhci_writel(host, ctl, F_SDH30_ESD_CONTROL); } } static const struct sdhci_ops sdhci_f_sdh30_ops = { .voltage_switch = sdhci_f_sdh30_soft_voltage_switch, .get_min_clock = sdhci_f_sdh30_get_min_clock, .reset = sdhci_f_sdh30_reset, .set_clock = sdhci_set_clock, .set_bus_width = sdhci_set_bus_width, .set_uhs_signaling = sdhci_set_uhs_signaling, }; static int sdhci_f_sdh30_probe(struct platform_device *pdev) { struct sdhci_host *host; struct device *dev = &pdev->dev; struct resource *res; int irq, ctrl = 0, ret = 0; struct f_sdhost_priv *priv; u32 reg = 0; irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(dev, "%s: no irq specified\n", __func__); return irq; } host = sdhci_alloc_host(dev, sizeof(struct f_sdhost_priv)); if (IS_ERR(host)) return PTR_ERR(host); priv = sdhci_priv(host); priv->dev = dev; host->quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | SDHCI_QUIRK_INVERTED_WRITE_PROTECT; host->quirks2 = SDHCI_QUIRK2_SUPPORT_SINGLE | SDHCI_QUIRK2_TUNING_WORK_AROUND; priv->enable_cmd_dat_delay = device_property_read_bool(dev, "fujitsu,cmd-dat-delay-select"); ret = mmc_of_parse(host->mmc); if (ret) goto err; platform_set_drvdata(pdev, host); host->hw_name = "f_sdh30"; host->ops = &sdhci_f_sdh30_ops; host->irq = irq; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); host->ioaddr = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(host->ioaddr)) { ret = PTR_ERR(host->ioaddr); goto err; } if (dev_of_node(dev)) { sdhci_get_of_property(pdev); priv->clk_iface = devm_clk_get(&pdev->dev, "iface"); if (IS_ERR(priv->clk_iface)) { ret = PTR_ERR(priv->clk_iface); goto err; } ret = clk_prepare_enable(priv->clk_iface); if (ret) goto err; priv->clk = devm_clk_get(&pdev->dev, "core"); if (IS_ERR(priv->clk)) { ret = PTR_ERR(priv->clk); goto err_clk; } ret = clk_prepare_enable(priv->clk); if (ret) goto err_clk; } /* init vendor specific regs */ ctrl = sdhci_readw(host, F_SDH30_AHB_CONFIG); ctrl |= F_SDH30_SIN | F_SDH30_AHB_INCR_16 | F_SDH30_AHB_INCR_8 | F_SDH30_AHB_INCR_4; ctrl &= ~(F_SDH30_AHB_BIGED | F_SDH30_BUSLOCK_EN); sdhci_writew(host, ctrl, F_SDH30_AHB_CONFIG); reg = sdhci_readl(host, F_SDH30_ESD_CONTROL); sdhci_writel(host, reg & ~F_SDH30_EMMC_RST, F_SDH30_ESD_CONTROL); msleep(20); sdhci_writel(host, reg | F_SDH30_EMMC_RST, F_SDH30_ESD_CONTROL); reg = sdhci_readl(host, SDHCI_CAPABILITIES); if (reg & SDHCI_CAN_DO_8BIT) priv->vendor_hs200 = F_SDH30_EMMC_HS200; ret = sdhci_add_host(host); if (ret) goto err_add_host; return 0; err_add_host: clk_disable_unprepare(priv->clk); err_clk: clk_disable_unprepare(priv->clk_iface); err: sdhci_free_host(host); return ret; } static int sdhci_f_sdh30_remove(struct platform_device *pdev) { struct sdhci_host *host = platform_get_drvdata(pdev); struct f_sdhost_priv *priv = sdhci_priv(host); sdhci_remove_host(host, readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff); clk_disable_unprepare(priv->clk_iface); clk_disable_unprepare(priv->clk); sdhci_free_host(host); platform_set_drvdata(pdev, NULL); return 0; } #ifdef CONFIG_OF static const struct of_device_id f_sdh30_dt_ids[] = { { .compatible = "fujitsu,mb86s70-sdhci-3.0" }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, f_sdh30_dt_ids); #endif #ifdef CONFIG_ACPI static const struct acpi_device_id f_sdh30_acpi_ids[] = { { "SCX0002" }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(acpi, f_sdh30_acpi_ids); #endif static struct platform_driver sdhci_f_sdh30_driver = { .driver = { .name = "f_sdh30", .of_match_table = of_match_ptr(f_sdh30_dt_ids), .acpi_match_table = ACPI_PTR(f_sdh30_acpi_ids), .pm = &sdhci_pltfm_pmops, }, .probe = sdhci_f_sdh30_probe, .remove = sdhci_f_sdh30_remove, }; module_platform_driver(sdhci_f_sdh30_driver); MODULE_DESCRIPTION("F_SDH30 SD Card Controller driver"); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("FUJITSU SEMICONDUCTOR LTD."); MODULE_ALIAS("platform:f_sdh30");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1