Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Peter Griffin | 1409 | 97.51% | 1 | 20.00% |
Björn Andersson | 33 | 2.28% | 2 | 40.00% |
Thomas Gleixner | 2 | 0.14% | 1 | 20.00% |
Loic Pallardy | 1 | 0.07% | 1 | 20.00% |
Total | 1445 | 5 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * SLIM core rproc driver * * Copyright (C) 2016 STMicroelectronics * * Author: Peter Griffin <peter.griffin@linaro.org> */ #include <linux/clk.h> #include <linux/err.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/remoteproc.h> #include <linux/remoteproc/st_slim_rproc.h> #include "remoteproc_internal.h" /* SLIM core registers */ #define SLIM_ID_OFST 0x0 #define SLIM_VER_OFST 0x4 #define SLIM_EN_OFST 0x8 #define SLIM_EN_RUN BIT(0) #define SLIM_CLK_GATE_OFST 0xC #define SLIM_CLK_GATE_DIS BIT(0) #define SLIM_CLK_GATE_RESET BIT(2) #define SLIM_SLIM_PC_OFST 0x20 /* DMEM registers */ #define SLIM_REV_ID_OFST 0x0 #define SLIM_REV_ID_MIN_MASK GENMASK(15, 8) #define SLIM_REV_ID_MIN(id) ((id & SLIM_REV_ID_MIN_MASK) >> 8) #define SLIM_REV_ID_MAJ_MASK GENMASK(23, 16) #define SLIM_REV_ID_MAJ(id) ((id & SLIM_REV_ID_MAJ_MASK) >> 16) /* peripherals registers */ #define SLIM_STBUS_SYNC_OFST 0xF88 #define SLIM_STBUS_SYNC_DIS BIT(0) #define SLIM_INT_SET_OFST 0xFD4 #define SLIM_INT_CLR_OFST 0xFD8 #define SLIM_INT_MASK_OFST 0xFDC #define SLIM_CMD_CLR_OFST 0xFC8 #define SLIM_CMD_MASK_OFST 0xFCC static const char *mem_names[ST_SLIM_MEM_MAX] = { [ST_SLIM_DMEM] = "dmem", [ST_SLIM_IMEM] = "imem", }; static int slim_clk_get(struct st_slim_rproc *slim_rproc, struct device *dev) { int clk, err; for (clk = 0; clk < ST_SLIM_MAX_CLK; clk++) { slim_rproc->clks[clk] = of_clk_get(dev->of_node, clk); if (IS_ERR(slim_rproc->clks[clk])) { err = PTR_ERR(slim_rproc->clks[clk]); if (err == -EPROBE_DEFER) goto err_put_clks; slim_rproc->clks[clk] = NULL; break; } } return 0; err_put_clks: while (--clk >= 0) clk_put(slim_rproc->clks[clk]); return err; } static void slim_clk_disable(struct st_slim_rproc *slim_rproc) { int clk; for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++) clk_disable_unprepare(slim_rproc->clks[clk]); } static int slim_clk_enable(struct st_slim_rproc *slim_rproc) { int clk, ret; for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++) { ret = clk_prepare_enable(slim_rproc->clks[clk]); if (ret) goto err_disable_clks; } return 0; err_disable_clks: while (--clk >= 0) clk_disable_unprepare(slim_rproc->clks[clk]); return ret; } /* * Remoteproc slim specific device handlers */ static int slim_rproc_start(struct rproc *rproc) { struct device *dev = &rproc->dev; struct st_slim_rproc *slim_rproc = rproc->priv; unsigned long hw_id, hw_ver, fw_rev; u32 val; /* disable CPU pipeline clock & reset CPU pipeline */ val = SLIM_CLK_GATE_DIS | SLIM_CLK_GATE_RESET; writel(val, slim_rproc->slimcore + SLIM_CLK_GATE_OFST); /* disable SLIM core STBus sync */ writel(SLIM_STBUS_SYNC_DIS, slim_rproc->peri + SLIM_STBUS_SYNC_OFST); /* enable cpu pipeline clock */ writel(!SLIM_CLK_GATE_DIS, slim_rproc->slimcore + SLIM_CLK_GATE_OFST); /* clear int & cmd mailbox */ writel(~0U, slim_rproc->peri + SLIM_INT_CLR_OFST); writel(~0U, slim_rproc->peri + SLIM_CMD_CLR_OFST); /* enable all channels cmd & int */ writel(~0U, slim_rproc->peri + SLIM_INT_MASK_OFST); writel(~0U, slim_rproc->peri + SLIM_CMD_MASK_OFST); /* enable cpu */ writel(SLIM_EN_RUN, slim_rproc->slimcore + SLIM_EN_OFST); hw_id = readl_relaxed(slim_rproc->slimcore + SLIM_ID_OFST); hw_ver = readl_relaxed(slim_rproc->slimcore + SLIM_VER_OFST); fw_rev = readl(slim_rproc->mem[ST_SLIM_DMEM].cpu_addr + SLIM_REV_ID_OFST); dev_info(dev, "fw rev:%ld.%ld on SLIM %ld.%ld\n", SLIM_REV_ID_MAJ(fw_rev), SLIM_REV_ID_MIN(fw_rev), hw_id, hw_ver); return 0; } static int slim_rproc_stop(struct rproc *rproc) { struct st_slim_rproc *slim_rproc = rproc->priv; u32 val; /* mask all (cmd & int) channels */ writel(0UL, slim_rproc->peri + SLIM_INT_MASK_OFST); writel(0UL, slim_rproc->peri + SLIM_CMD_MASK_OFST); /* disable cpu pipeline clock */ writel(SLIM_CLK_GATE_DIS, slim_rproc->slimcore + SLIM_CLK_GATE_OFST); writel(!SLIM_EN_RUN, slim_rproc->slimcore + SLIM_EN_OFST); val = readl(slim_rproc->slimcore + SLIM_EN_OFST); if (val & SLIM_EN_RUN) dev_warn(&rproc->dev, "Failed to disable SLIM"); dev_dbg(&rproc->dev, "slim stopped\n"); return 0; } static void *slim_rproc_da_to_va(struct rproc *rproc, u64 da, int len) { struct st_slim_rproc *slim_rproc = rproc->priv; void *va = NULL; int i; for (i = 0; i < ST_SLIM_MEM_MAX; i++) { if (da != slim_rproc->mem[i].bus_addr) continue; if (len <= slim_rproc->mem[i].size) { /* __force to make sparse happy with type conversion */ va = (__force void *)slim_rproc->mem[i].cpu_addr; break; } } dev_dbg(&rproc->dev, "da = 0x%llx len = 0x%x va = 0x%pK\n", da, len, va); return va; } static const struct rproc_ops slim_rproc_ops = { .start = slim_rproc_start, .stop = slim_rproc_stop, .da_to_va = slim_rproc_da_to_va, .get_boot_addr = rproc_elf_get_boot_addr, .load = rproc_elf_load_segments, .sanity_check = rproc_elf_sanity_check, }; /** * st_slim_rproc_alloc() - allocate and initialise slim rproc * @pdev: Pointer to the platform_device struct * @fw_name: Name of firmware for rproc to use * * Function for allocating and initialising a slim rproc for use by * device drivers whose IP is based around the SLIM core. It * obtains and enables any clocks required by the SLIM core and also * ioremaps the various IO. * * Returns st_slim_rproc pointer or PTR_ERR() on error. */ struct st_slim_rproc *st_slim_rproc_alloc(struct platform_device *pdev, char *fw_name) { struct device *dev = &pdev->dev; struct st_slim_rproc *slim_rproc; struct device_node *np = dev->of_node; struct rproc *rproc; struct resource *res; int err, i; if (!fw_name) return ERR_PTR(-EINVAL); if (!of_device_is_compatible(np, "st,slim-rproc")) return ERR_PTR(-EINVAL); rproc = rproc_alloc(dev, np->name, &slim_rproc_ops, fw_name, sizeof(*slim_rproc)); if (!rproc) return ERR_PTR(-ENOMEM); rproc->has_iommu = false; slim_rproc = rproc->priv; slim_rproc->rproc = rproc; /* get imem and dmem */ for (i = 0; i < ARRAY_SIZE(mem_names); i++) { res = platform_get_resource_byname(pdev, IORESOURCE_MEM, mem_names[i]); slim_rproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res); if (IS_ERR(slim_rproc->mem[i].cpu_addr)) { dev_err(&pdev->dev, "devm_ioremap_resource failed\n"); err = PTR_ERR(slim_rproc->mem[i].cpu_addr); goto err; } slim_rproc->mem[i].bus_addr = res->start; slim_rproc->mem[i].size = resource_size(res); } res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "slimcore"); slim_rproc->slimcore = devm_ioremap_resource(dev, res); if (IS_ERR(slim_rproc->slimcore)) { dev_err(&pdev->dev, "failed to ioremap slimcore IO\n"); err = PTR_ERR(slim_rproc->slimcore); goto err; } res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "peripherals"); slim_rproc->peri = devm_ioremap_resource(dev, res); if (IS_ERR(slim_rproc->peri)) { dev_err(&pdev->dev, "failed to ioremap peripherals IO\n"); err = PTR_ERR(slim_rproc->peri); goto err; } err = slim_clk_get(slim_rproc, dev); if (err) goto err; err = slim_clk_enable(slim_rproc); if (err) { dev_err(dev, "Failed to enable clocks\n"); goto err_clk_put; } /* Register as a remoteproc device */ err = rproc_add(rproc); if (err) { dev_err(dev, "registration of slim remoteproc failed\n"); goto err_clk_dis; } return slim_rproc; err_clk_dis: slim_clk_disable(slim_rproc); err_clk_put: for (i = 0; i < ST_SLIM_MAX_CLK && slim_rproc->clks[i]; i++) clk_put(slim_rproc->clks[i]); err: rproc_free(rproc); return ERR_PTR(err); } EXPORT_SYMBOL(st_slim_rproc_alloc); /** * st_slim_rproc_put() - put slim rproc resources * @slim_rproc: Pointer to the st_slim_rproc struct * * Function for calling respective _put() functions on slim_rproc resources. * */ void st_slim_rproc_put(struct st_slim_rproc *slim_rproc) { int clk; if (!slim_rproc) return; slim_clk_disable(slim_rproc); for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++) clk_put(slim_rproc->clks[clk]); rproc_del(slim_rproc->rproc); rproc_free(slim_rproc->rproc); } EXPORT_SYMBOL(st_slim_rproc_put); MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>"); MODULE_DESCRIPTION("STMicroelectronics SLIM core rproc driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1