Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Sreekanth Reddy | 6462 | 92.58% | 4 | 28.57% |
Suganath Prabu Subramani | 393 | 5.63% | 4 | 28.57% |
Joe Perches | 82 | 1.17% | 2 | 14.29% |
Bart Van Assche | 36 | 0.52% | 1 | 7.14% |
Chaitra P B | 5 | 0.07% | 1 | 7.14% |
Masanari Iida | 1 | 0.01% | 1 | 7.14% |
Colin Ian King | 1 | 0.01% | 1 | 7.14% |
Total | 6980 | 14 |
/* * This module provides common API for accessing firmware configuration pages * * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c * Copyright (C) 2012-2014 LSI Corporation * Copyright (C) 2013-2014 Avago Technologies * (mailto: MPT-FusionLinux.pdl@avagotech.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * NO WARRANTY * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is * solely responsible for determining the appropriateness of using and * distributing the Program and assumes all risks associated with its * exercise of rights under this Agreement, including but not limited to * the risks and costs of program errors, damage to or loss of data, * programs or equipment, and unavailability or interruption of operations. * DISCLAIMER OF LIABILITY * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, * USA. */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/errno.h> #include <linux/blkdev.h> #include <linux/sched.h> #include <linux/workqueue.h> #include <linux/delay.h> #include <linux/pci.h> #include "mpt3sas_base.h" /* local definitions */ /* Timeout for config page request (in seconds) */ #define MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT 15 /* Common sgl flags for READING a config page. */ #define MPT3_CONFIG_COMMON_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \ MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \ | MPI2_SGE_FLAGS_END_OF_LIST) << MPI2_SGE_FLAGS_SHIFT) /* Common sgl flags for WRITING a config page. */ #define MPT3_CONFIG_COMMON_WRITE_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \ MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \ | MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC) \ << MPI2_SGE_FLAGS_SHIFT) /** * struct config_request - obtain dma memory via routine * @sz: size * @page: virt pointer * @page_dma: phys pointer * */ struct config_request { u16 sz; void *page; dma_addr_t page_dma; }; /** * _config_display_some_debug - debug routine * @ioc: per adapter object * @smid: system request message index * @calling_function_name: string pass from calling function * @mpi_reply: reply message frame * Context: none. * * Function for displaying debug info helpful when debugging issues * in this module. */ static void _config_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid, char *calling_function_name, MPI2DefaultReply_t *mpi_reply) { Mpi2ConfigRequest_t *mpi_request; char *desc = NULL; if (!(ioc->logging_level & MPT_DEBUG_CONFIG)) return; mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); switch (mpi_request->Header.PageType & MPI2_CONFIG_PAGETYPE_MASK) { case MPI2_CONFIG_PAGETYPE_IO_UNIT: desc = "io_unit"; break; case MPI2_CONFIG_PAGETYPE_IOC: desc = "ioc"; break; case MPI2_CONFIG_PAGETYPE_BIOS: desc = "bios"; break; case MPI2_CONFIG_PAGETYPE_RAID_VOLUME: desc = "raid_volume"; break; case MPI2_CONFIG_PAGETYPE_MANUFACTURING: desc = "manufacturing"; break; case MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK: desc = "physdisk"; break; case MPI2_CONFIG_PAGETYPE_EXTENDED: switch (mpi_request->ExtPageType) { case MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT: desc = "sas_io_unit"; break; case MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER: desc = "sas_expander"; break; case MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE: desc = "sas_device"; break; case MPI2_CONFIG_EXTPAGETYPE_SAS_PHY: desc = "sas_phy"; break; case MPI2_CONFIG_EXTPAGETYPE_LOG: desc = "log"; break; case MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE: desc = "enclosure"; break; case MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG: desc = "raid_config"; break; case MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING: desc = "driver_mapping"; break; case MPI2_CONFIG_EXTPAGETYPE_SAS_PORT: desc = "sas_port"; break; case MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING: desc = "ext_manufacturing"; break; case MPI2_CONFIG_EXTPAGETYPE_PCIE_IO_UNIT: desc = "pcie_io_unit"; break; case MPI2_CONFIG_EXTPAGETYPE_PCIE_SWITCH: desc = "pcie_switch"; break; case MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE: desc = "pcie_device"; break; case MPI2_CONFIG_EXTPAGETYPE_PCIE_LINK: desc = "pcie_link"; break; } break; } if (!desc) return; ioc_info(ioc, "%s: %s(%d), action(%d), form(0x%08x), smid(%d)\n", calling_function_name, desc, mpi_request->Header.PageNumber, mpi_request->Action, le32_to_cpu(mpi_request->PageAddress), smid); if (!mpi_reply) return; if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo) ioc_info(ioc, "\tiocstatus(0x%04x), loginfo(0x%08x)\n", le16_to_cpu(mpi_reply->IOCStatus), le32_to_cpu(mpi_reply->IOCLogInfo)); } /** * _config_alloc_config_dma_memory - obtain physical memory * @ioc: per adapter object * @mem: struct config_request * * A wrapper for obtaining dma-able memory for config page request. * * Return: 0 for success, non-zero for failure. */ static int _config_alloc_config_dma_memory(struct MPT3SAS_ADAPTER *ioc, struct config_request *mem) { int r = 0; if (mem->sz > ioc->config_page_sz) { mem->page = dma_alloc_coherent(&ioc->pdev->dev, mem->sz, &mem->page_dma, GFP_KERNEL); if (!mem->page) { ioc_err(ioc, "%s: dma_alloc_coherent failed asking for (%d) bytes!!\n", __func__, mem->sz); r = -ENOMEM; } } else { /* use tmp buffer if less than 512 bytes */ mem->page = ioc->config_page; mem->page_dma = ioc->config_page_dma; } ioc->config_vaddr = mem->page; return r; } /** * _config_free_config_dma_memory - wrapper to free the memory * @ioc: per adapter object * @mem: struct config_request * * A wrapper to free dma-able memory when using _config_alloc_config_dma_memory. * * Return: 0 for success, non-zero for failure. */ static void _config_free_config_dma_memory(struct MPT3SAS_ADAPTER *ioc, struct config_request *mem) { if (mem->sz > ioc->config_page_sz) dma_free_coherent(&ioc->pdev->dev, mem->sz, mem->page, mem->page_dma); } /** * mpt3sas_config_done - config page completion routine * @ioc: per adapter object * @smid: system request message index * @msix_index: MSIX table index supplied by the OS * @reply: reply message frame(lower 32bit addr) * Context: none. * * The callback handler when using _config_request. * * Return: 1 meaning mf should be freed from _base_interrupt * 0 means the mf is freed from this function. */ u8 mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) { MPI2DefaultReply_t *mpi_reply; if (ioc->config_cmds.status == MPT3_CMD_NOT_USED) return 1; if (ioc->config_cmds.smid != smid) return 1; ioc->config_cmds.status |= MPT3_CMD_COMPLETE; mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); if (mpi_reply) { ioc->config_cmds.status |= MPT3_CMD_REPLY_VALID; memcpy(ioc->config_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); } ioc->config_cmds.status &= ~MPT3_CMD_PENDING; _config_display_some_debug(ioc, smid, "config_done", mpi_reply); ioc->config_cmds.smid = USHRT_MAX; complete(&ioc->config_cmds.done); return 1; } /** * _config_request - main routine for sending config page requests * @ioc: per adapter object * @mpi_request: request message frame * @mpi_reply: reply mf payload returned from firmware * @timeout: timeout in seconds * @config_page: contents of the config page * @config_page_sz: size of config page * Context: sleep * * A generic API for config page requests to firmware. * * The ioc->config_cmds.status flag should be MPT3_CMD_NOT_USED before calling * this API. * * The callback index is set inside `ioc->config_cb_idx. * * Return: 0 for success, non-zero for failure. */ static int _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t *mpi_request, Mpi2ConfigReply_t *mpi_reply, int timeout, void *config_page, u16 config_page_sz) { u16 smid; Mpi2ConfigRequest_t *config_request; int r; u8 retry_count, issue_host_reset = 0; struct config_request mem; u32 ioc_status = UINT_MAX; mutex_lock(&ioc->config_cmds.mutex); if (ioc->config_cmds.status != MPT3_CMD_NOT_USED) { ioc_err(ioc, "%s: config_cmd in use\n", __func__); mutex_unlock(&ioc->config_cmds.mutex); return -EAGAIN; } retry_count = 0; memset(&mem, 0, sizeof(struct config_request)); mpi_request->VF_ID = 0; /* TODO */ mpi_request->VP_ID = 0; if (config_page) { mpi_request->Header.PageVersion = mpi_reply->Header.PageVersion; mpi_request->Header.PageNumber = mpi_reply->Header.PageNumber; mpi_request->Header.PageType = mpi_reply->Header.PageType; mpi_request->Header.PageLength = mpi_reply->Header.PageLength; mpi_request->ExtPageLength = mpi_reply->ExtPageLength; mpi_request->ExtPageType = mpi_reply->ExtPageType; if (mpi_request->Header.PageLength) mem.sz = mpi_request->Header.PageLength * 4; else mem.sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; r = _config_alloc_config_dma_memory(ioc, &mem); if (r != 0) goto out; if (mpi_request->Action == MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT || mpi_request->Action == MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM) { ioc->base_add_sg_single(&mpi_request->PageBufferSGE, MPT3_CONFIG_COMMON_WRITE_SGLFLAGS | mem.sz, mem.page_dma); memcpy(mem.page, config_page, min_t(u16, mem.sz, config_page_sz)); } else { memset(config_page, 0, config_page_sz); ioc->base_add_sg_single(&mpi_request->PageBufferSGE, MPT3_CONFIG_COMMON_SGLFLAGS | mem.sz, mem.page_dma); memset(mem.page, 0, min_t(u16, mem.sz, config_page_sz)); } } retry_config: if (retry_count) { if (retry_count > 2) { /* attempt only 2 retries */ r = -EFAULT; goto free_mem; } ioc_info(ioc, "%s: attempting retry (%d)\n", __func__, retry_count); } r = mpt3sas_wait_for_ioc(ioc, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT); if (r) goto free_mem; smid = mpt3sas_base_get_smid(ioc, ioc->config_cb_idx); if (!smid) { ioc_err(ioc, "%s: failed obtaining a smid\n", __func__); ioc->config_cmds.status = MPT3_CMD_NOT_USED; r = -EAGAIN; goto free_mem; } r = 0; memset(mpi_reply, 0, sizeof(Mpi2ConfigReply_t)); ioc->config_cmds.status = MPT3_CMD_PENDING; config_request = mpt3sas_base_get_msg_frame(ioc, smid); ioc->config_cmds.smid = smid; memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t)); _config_display_some_debug(ioc, smid, "config_request", NULL); init_completion(&ioc->config_cmds.done); mpt3sas_base_put_smid_default(ioc, smid); wait_for_completion_timeout(&ioc->config_cmds.done, timeout*HZ); if (!(ioc->config_cmds.status & MPT3_CMD_COMPLETE)) { mpt3sas_base_check_cmd_timeout(ioc, ioc->config_cmds.status, mpi_request, sizeof(Mpi2ConfigRequest_t)/4); retry_count++; if (ioc->config_cmds.smid == smid) mpt3sas_base_free_smid(ioc, smid); if ((ioc->shost_recovery) || (ioc->config_cmds.status & MPT3_CMD_RESET) || ioc->pci_error_recovery) goto retry_config; issue_host_reset = 1; r = -EFAULT; goto free_mem; } if (ioc->config_cmds.status & MPT3_CMD_REPLY_VALID) { memcpy(mpi_reply, ioc->config_cmds.reply, sizeof(Mpi2ConfigReply_t)); /* Reply Frame Sanity Checks to workaround FW issues */ if ((mpi_request->Header.PageType & 0xF) != (mpi_reply->Header.PageType & 0xF)) { _debug_dump_mf(mpi_request, ioc->request_sz/4); _debug_dump_reply(mpi_reply, ioc->request_sz/4); panic("%s: %s: Firmware BUG: mpi_reply mismatch: Requested PageType(0x%02x) Reply PageType(0x%02x)\n", ioc->name, __func__, mpi_request->Header.PageType & 0xF, mpi_reply->Header.PageType & 0xF); } if (((mpi_request->Header.PageType & 0xF) == MPI2_CONFIG_PAGETYPE_EXTENDED) && mpi_request->ExtPageType != mpi_reply->ExtPageType) { _debug_dump_mf(mpi_request, ioc->request_sz/4); _debug_dump_reply(mpi_reply, ioc->request_sz/4); panic("%s: %s: Firmware BUG: mpi_reply mismatch: Requested ExtPageType(0x%02x) Reply ExtPageType(0x%02x)\n", ioc->name, __func__, mpi_request->ExtPageType, mpi_reply->ExtPageType); } ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; } if (retry_count) ioc_info(ioc, "%s: retry (%d) completed!!\n", __func__, retry_count); if ((ioc_status == MPI2_IOCSTATUS_SUCCESS) && config_page && mpi_request->Action == MPI2_CONFIG_ACTION_PAGE_READ_CURRENT) { u8 *p = (u8 *)mem.page; /* Config Page Sanity Checks to workaround FW issues */ if (p) { if ((mpi_request->Header.PageType & 0xF) != (p[3] & 0xF)) { _debug_dump_mf(mpi_request, ioc->request_sz/4); _debug_dump_reply(mpi_reply, ioc->request_sz/4); _debug_dump_config(p, min_t(u16, mem.sz, config_page_sz)/4); panic("%s: %s: Firmware BUG: config page mismatch: Requested PageType(0x%02x) Reply PageType(0x%02x)\n", ioc->name, __func__, mpi_request->Header.PageType & 0xF, p[3] & 0xF); } if (((mpi_request->Header.PageType & 0xF) == MPI2_CONFIG_PAGETYPE_EXTENDED) && (mpi_request->ExtPageType != p[6])) { _debug_dump_mf(mpi_request, ioc->request_sz/4); _debug_dump_reply(mpi_reply, ioc->request_sz/4); _debug_dump_config(p, min_t(u16, mem.sz, config_page_sz)/4); panic("%s: %s: Firmware BUG: config page mismatch: Requested ExtPageType(0x%02x) Reply ExtPageType(0x%02x)\n", ioc->name, __func__, mpi_request->ExtPageType, p[6]); } } memcpy(config_page, mem.page, min_t(u16, mem.sz, config_page_sz)); } free_mem: if (config_page) _config_free_config_dma_memory(ioc, &mem); out: ioc->config_cmds.status = MPT3_CMD_NOT_USED; mutex_unlock(&ioc->config_cmds.mutex); if (issue_host_reset) mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER); return r; } /** * mpt3sas_config_get_manufacturing_pg0 - obtain manufacturing page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_manufacturing_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING; mpi_request.Header.PageNumber = 0; mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_manufacturing_pg7 - obtain manufacturing page 7 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @sz: size of buffer passed in config_page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_manufacturing_pg7(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage7_t *config_page, u16 sz) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING; mpi_request.Header.PageNumber = 7; mpi_request.Header.PageVersion = MPI2_MANUFACTURING7_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz); out: return r; } /** * mpt3sas_config_get_manufacturing_pg10 - obtain manufacturing page 10 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_manufacturing_pg10(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, struct Mpi2ManufacturingPage10_t *config_page) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING; mpi_request.Header.PageNumber = 10; mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_manufacturing_pg11 - obtain manufacturing page 11 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, struct Mpi2ManufacturingPage11_t *config_page) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING; mpi_request.Header.PageNumber = 11; mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_set_manufacturing_pg11 - set manufacturing page 11 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_set_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, struct Mpi2ManufacturingPage11_t *config_page) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING; mpi_request.Header.PageNumber = 11; mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_bios_pg2 - obtain bios page 2 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_bios_pg2(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage2_t *config_page) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS; mpi_request.Header.PageNumber = 2; mpi_request.Header.PageVersion = MPI2_BIOSPAGE2_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_bios_pg3 - obtain bios page 3 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_bios_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage3_t *config_page) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS; mpi_request.Header.PageNumber = 3; mpi_request.Header.PageVersion = MPI2_BIOSPAGE3_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_iounit_pg0 - obtain iounit page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_iounit_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage0_t *config_page) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT; mpi_request.Header.PageNumber = 0; mpi_request.Header.PageVersion = MPI2_IOUNITPAGE0_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_iounit_pg1 - obtain iounit page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT; mpi_request.Header.PageNumber = 1; mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_set_iounit_pg1 - set iounit page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT; mpi_request.Header.PageNumber = 1; mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_iounit_pg3 - obtain iounit page 3 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @sz: size of buffer passed in config_page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_iounit_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT; mpi_request.Header.PageNumber = 3; mpi_request.Header.PageVersion = MPI2_IOUNITPAGE3_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz); out: return r; } /** * mpt3sas_config_get_iounit_pg8 - obtain iounit page 8 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT; mpi_request.Header.PageNumber = 8; mpi_request.Header.PageVersion = MPI2_IOUNITPAGE8_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_ioc_pg8 - obtain ioc page 8 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_ioc_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage8_t *config_page) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IOC; mpi_request.Header.PageNumber = 8; mpi_request.Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_sas_device_pg0 - obtain sas device page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_HANDLE or HANDLE * @handle: device handle * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_sas_device_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage0_t *config_page, u32 form, u32 handle) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE; mpi_request.Header.PageVersion = MPI2_SASDEVICE0_PAGEVERSION; mpi_request.Header.PageNumber = 0; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.PageAddress = cpu_to_le32(form | handle); mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_sas_device_pg1 - obtain sas device page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_HANDLE or HANDLE * @handle: device handle * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_sas_device_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage1_t *config_page, u32 form, u32 handle) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE; mpi_request.Header.PageVersion = MPI2_SASDEVICE1_PAGEVERSION; mpi_request.Header.PageNumber = 1; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.PageAddress = cpu_to_le32(form | handle); mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_pcie_device_pg0 - obtain pcie device page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_HANDLE or HANDLE * @handle: device handle * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_pcie_device_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage0_t *config_page, u32 form, u32 handle) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE; mpi_request.Header.PageVersion = MPI26_PCIEDEVICE0_PAGEVERSION; mpi_request.Header.PageNumber = 0; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.PageAddress = cpu_to_le32(form | handle); mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_pcie_device_pg2 - obtain pcie device page 2 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_HANDLE or HANDLE * @handle: device handle * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_pcie_device_pg2(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage2_t *config_page, u32 form, u32 handle) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE; mpi_request.Header.PageVersion = MPI26_PCIEDEVICE2_PAGEVERSION; mpi_request.Header.PageNumber = 2; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.PageAddress = cpu_to_le32(form | handle); mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_number_hba_phys - obtain number of phys on the host * @ioc: per adapter object * @num_phys: pointer returned with the number of phys * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_number_hba_phys(struct MPT3SAS_ADAPTER *ioc, u8 *num_phys) { Mpi2ConfigRequest_t mpi_request; int r; u16 ioc_status; Mpi2ConfigReply_t mpi_reply; Mpi2SasIOUnitPage0_t config_page; *num_phys = 0; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; mpi_request.Header.PageNumber = 0; mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, &mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, &mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page, sizeof(Mpi2SasIOUnitPage0_t)); if (!r) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status == MPI2_IOCSTATUS_SUCCESS) *num_phys = config_page.NumPhys; } out: return r; } /** * mpt3sas_config_get_sas_iounit_pg0 - obtain sas iounit page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @sz: size of buffer passed in config_page * Context: sleep. * * Calling function should call config_get_number_hba_phys prior to * this function, so enough memory is allocated for config_page. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_sas_iounit_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage0_t *config_page, u16 sz) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; mpi_request.Header.PageNumber = 0; mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz); out: return r; } /** * mpt3sas_config_get_sas_iounit_pg1 - obtain sas iounit page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @sz: size of buffer passed in config_page * Context: sleep. * * Calling function should call config_get_number_hba_phys prior to * this function, so enough memory is allocated for config_page. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; mpi_request.Header.PageNumber = 1; mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz); out: return r; } /** * mpt3sas_config_set_sas_iounit_pg1 - send sas iounit page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @sz: size of buffer passed in config_page * Context: sleep. * * Calling function should call config_get_number_hba_phys prior to * this function, so enough memory is allocated for config_page. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_set_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; mpi_request.Header.PageNumber = 1; mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz); mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz); out: return r; } /** * mpt3sas_config_get_expander_pg0 - obtain expander page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_HANDLE or HANDLE * @handle: expander handle * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_expander_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER; mpi_request.Header.PageNumber = 0; mpi_request.Header.PageVersion = MPI2_SASEXPANDER0_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.PageAddress = cpu_to_le32(form | handle); mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_expander_pg1 - obtain expander page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @phy_number: phy number * @handle: expander handle * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_expander_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number, u16 handle) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER; mpi_request.Header.PageNumber = 1; mpi_request.Header.PageVersion = MPI2_SASEXPANDER1_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.PageAddress = cpu_to_le32(MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM | (phy_number << MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT) | handle); mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_enclosure_pg0 - obtain enclosure page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_HANDLE or HANDLE * @handle: expander handle * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_enclosure_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE; mpi_request.Header.PageNumber = 0; mpi_request.Header.PageVersion = MPI2_SASENCLOSURE0_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.PageAddress = cpu_to_le32(form | handle); mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_phy_pg0 - obtain phy page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @phy_number: phy number * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_phy_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY; mpi_request.Header.PageNumber = 0; mpi_request.Header.PageVersion = MPI2_SASPHY0_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.PageAddress = cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number); mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_phy_pg1 - obtain phy page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @phy_number: phy number * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_phy_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY; mpi_request.Header.PageNumber = 1; mpi_request.Header.PageVersion = MPI2_SASPHY1_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.PageAddress = cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number); mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_raid_volume_pg1 - obtain raid volume page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_HANDLE or HANDLE * @handle: volume handle * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_raid_volume_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form, u32 handle) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME; mpi_request.Header.PageNumber = 1; mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE1_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.PageAddress = cpu_to_le32(form | handle); mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_number_pds - obtain number of phys disk assigned to volume * @ioc: per adapter object * @handle: volume handle * @num_pds: returns pds count * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_number_pds(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 *num_pds) { Mpi2ConfigRequest_t mpi_request; Mpi2RaidVolPage0_t config_page; Mpi2ConfigReply_t mpi_reply; int r; u16 ioc_status; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); *num_pds = 0; mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME; mpi_request.Header.PageNumber = 0; mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, &mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.PageAddress = cpu_to_le32(MPI2_RAID_VOLUME_PGAD_FORM_HANDLE | handle); mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, &mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page, sizeof(Mpi2RaidVolPage0_t)); if (!r) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status == MPI2_IOCSTATUS_SUCCESS) *num_pds = config_page.NumPhysDisks; } out: return r; } /** * mpt3sas_config_get_raid_volume_pg0 - obtain raid volume page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_HANDLE or HANDLE * @handle: volume handle * @sz: size of buffer passed in config_page * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_raid_volume_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form, u32 handle, u16 sz) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME; mpi_request.Header.PageNumber = 0; mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.PageAddress = cpu_to_le32(form | handle); mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz); out: return r; } /** * mpt3sas_config_get_phys_disk_pg0 - obtain phys disk page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_PHYSDISKNUM, PHYSDISKNUM, DEVHANDLE * @form_specific: specific to the form * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_phys_disk_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form, u32 form_specific) { Mpi2ConfigRequest_t mpi_request; int r; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK; mpi_request.Header.PageNumber = 0; mpi_request.Header.PageVersion = MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.PageAddress = cpu_to_le32(form | form_specific); mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; r = _config_request(ioc, &mpi_request, mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sizeof(*config_page)); out: return r; } /** * mpt3sas_config_get_volume_handle - returns volume handle for give hidden * raid components * @ioc: per adapter object * @pd_handle: phys disk handle * @volume_handle: volume handle * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_volume_handle(struct MPT3SAS_ADAPTER *ioc, u16 pd_handle, u16 *volume_handle) { Mpi2RaidConfigurationPage0_t *config_page = NULL; Mpi2ConfigRequest_t mpi_request; Mpi2ConfigReply_t mpi_reply; int r, i, config_page_sz; u16 ioc_status; int config_num; u16 element_type; u16 phys_disk_dev_handle; *volume_handle = 0; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG; mpi_request.Header.PageVersion = MPI2_RAIDCONFIG0_PAGEVERSION; mpi_request.Header.PageNumber = 0; ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); r = _config_request(ioc, &mpi_request, &mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); if (r) goto out; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; config_page_sz = (le16_to_cpu(mpi_reply.ExtPageLength) * 4); config_page = kmalloc(config_page_sz, GFP_KERNEL); if (!config_page) { r = -1; goto out; } config_num = 0xff; while (1) { mpi_request.PageAddress = cpu_to_le32(config_num + MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM); r = _config_request(ioc, &mpi_request, &mpi_reply, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, config_page_sz); if (r) goto out; r = -1; ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status != MPI2_IOCSTATUS_SUCCESS) goto out; for (i = 0; i < config_page->NumElements; i++) { element_type = le16_to_cpu(config_page-> ConfigElement[i].ElementFlags) & MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE; if (element_type == MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT || element_type == MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT) { phys_disk_dev_handle = le16_to_cpu(config_page->ConfigElement[i]. PhysDiskDevHandle); if (phys_disk_dev_handle == pd_handle) { *volume_handle = le16_to_cpu(config_page-> ConfigElement[i].VolDevHandle); r = 0; goto out; } } else if (element_type == MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT) { *volume_handle = 0; r = 0; goto out; } } config_num = config_page->ConfigNum; } out: kfree(config_page); return r; } /** * mpt3sas_config_get_volume_wwid - returns wwid given the volume handle * @ioc: per adapter object * @volume_handle: volume handle * @wwid: volume wwid * Context: sleep. * * Return: 0 for success, non-zero for failure. */ int mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc, u16 volume_handle, u64 *wwid) { Mpi2ConfigReply_t mpi_reply; Mpi2RaidVolPage1_t raid_vol_pg1; *wwid = 0; if (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply, &raid_vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, volume_handle))) { *wwid = le64_to_cpu(raid_vol_pg1.WWID); return 0; } else return -1; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1