| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Linus Torvalds | 1130 | 89.19% | 4 | 22.22% |
| Alan Cox | 66 | 5.21% | 1 | 5.56% |
| Henrik Kretzschmar | 41 | 3.24% | 1 | 5.56% |
| Dominik Brodowski | 12 | 0.95% | 4 | 22.22% |
| Christoph Hellwig | 7 | 0.55% | 3 | 16.67% |
| Al Viro | 6 | 0.47% | 1 | 5.56% |
| Jeff Garzik | 2 | 0.16% | 1 | 5.56% |
| Jens Axboe | 1 | 0.08% | 1 | 5.56% |
| David Howells | 1 | 0.08% | 1 | 5.56% |
| Daniel Mack | 1 | 0.08% | 1 | 5.56% |
| Total | 1267 | 18 |
/*=======================================================/ Header file for nsp_cs.c By: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp> Ver.1.0 : Cut unused lines. Ver 0.1 : Initial version. This software may be used and distributed according to the terms of the GNU General Public License. =========================================================*/ #ifndef __nsp_cs__ #define __nsp_cs__ /* for debugging */ //#define NSP_DEBUG 9 /* #define static #define inline */ /************************************ * Some useful macros... */ /* SCSI initiator must be ID 7 */ #define NSP_INITIATOR_ID 7 #define NSP_SELTIMEOUT 200 /*************************************************************************** * register definitions ***************************************************************************/ /*======================================================================== * base register ========================================================================*/ #define IRQCONTROL 0x00 /* R */ # define IRQCONTROL_RESELECT_CLEAR BIT(0) # define IRQCONTROL_PHASE_CHANGE_CLEAR BIT(1) # define IRQCONTROL_TIMER_CLEAR BIT(2) # define IRQCONTROL_FIFO_CLEAR BIT(3) # define IRQCONTROL_ALLMASK 0xff # define IRQCONTROL_ALLCLEAR (IRQCONTROL_RESELECT_CLEAR | \ IRQCONTROL_PHASE_CHANGE_CLEAR | \ IRQCONTROL_TIMER_CLEAR | \ IRQCONTROL_FIFO_CLEAR ) # define IRQCONTROL_IRQDISABLE 0xf0 #define IRQSTATUS 0x00 /* W */ # define IRQSTATUS_SCSI BIT(0) # define IRQSTATUS_TIMER BIT(2) # define IRQSTATUS_FIFO BIT(3) # define IRQSTATUS_MASK 0x0f #define IFSELECT 0x01 /* W */ # define IF_IFSEL BIT(0) # define IF_REGSEL BIT(2) #define FIFOSTATUS 0x01 /* R */ # define FIFOSTATUS_CHIP_REVISION_MASK 0x0f # define FIFOSTATUS_CHIP_ID_MASK 0x70 # define FIFOSTATUS_FULL_EMPTY BIT(7) #define INDEXREG 0x02 /* R/W */ #define DATAREG 0x03 /* R/W */ #define FIFODATA 0x04 /* R/W */ #define FIFODATA1 0x05 /* R/W */ #define FIFODATA2 0x06 /* R/W */ #define FIFODATA3 0x07 /* R/W */ /*==================================================================== * indexed register ====================================================================*/ #define EXTBUSCTRL 0x10 /* R/W,deleted */ #define CLOCKDIV 0x11 /* R/W */ # define CLOCK_40M 0x02 # define CLOCK_20M 0x01 # define FAST_20 BIT(2) #define TERMPWRCTRL 0x13 /* R/W */ # define POWER_ON BIT(0) #define SCSIIRQMODE 0x15 /* R/W */ # define SCSI_PHASE_CHANGE_EI BIT(0) # define RESELECT_EI BIT(4) # define FIFO_IRQ_EI BIT(5) # define SCSI_RESET_IRQ_EI BIT(6) #define IRQPHASESENCE 0x16 /* R */ # define LATCHED_MSG BIT(0) # define LATCHED_IO BIT(1) # define LATCHED_CD BIT(2) # define LATCHED_BUS_FREE BIT(3) # define PHASE_CHANGE_IRQ BIT(4) # define RESELECT_IRQ BIT(5) # define FIFO_IRQ BIT(6) # define SCSI_RESET_IRQ BIT(7) #define TIMERCOUNT 0x17 /* R/W */ #define SCSIBUSCTRL 0x18 /* R/W */ # define SCSI_SEL BIT(0) # define SCSI_RST BIT(1) # define SCSI_DATAOUT_ENB BIT(2) # define SCSI_ATN BIT(3) # define SCSI_ACK BIT(4) # define SCSI_BSY BIT(5) # define AUTODIRECTION BIT(6) # define ACKENB BIT(7) #define SCSIBUSMON 0x19 /* R */ #define SETARBIT 0x1A /* W */ # define ARBIT_GO BIT(0) # define ARBIT_FLAG_CLEAR BIT(1) #define ARBITSTATUS 0x1A /* R */ /*# define ARBIT_GO BIT(0)*/ # define ARBIT_WIN BIT(1) # define ARBIT_FAIL BIT(2) # define RESELECT_FLAG BIT(3) #define PARITYCTRL 0x1B /* W */ #define PARITYSTATUS 0x1B /* R */ #define COMMANDCTRL 0x1C /* W */ # define CLEAR_COMMAND_POINTER BIT(0) # define AUTO_COMMAND_GO BIT(1) #define RESELECTID 0x1C /* R */ #define COMMANDDATA 0x1D /* R/W */ #define POINTERCLR 0x1E /* W */ # define POINTER_CLEAR BIT(0) # define ACK_COUNTER_CLEAR BIT(1) # define REQ_COUNTER_CLEAR BIT(2) # define HOST_COUNTER_CLEAR BIT(3) # define READ_SOURCE (BIT(4) | BIT(5)) # define ACK_COUNTER (0) # define REQ_COUNTER (BIT(4)) # define HOST_COUNTER (BIT(5)) #define TRANSFERCOUNT 0x1E /* R */ #define TRANSFERMODE 0x20 /* R/W */ # define MODE_MEM8 BIT(0) # define MODE_MEM32 BIT(1) # define MODE_ADR24 BIT(2) # define MODE_ADR32 BIT(3) # define MODE_IO8 BIT(4) # define MODE_IO32 BIT(5) # define TRANSFER_GO BIT(6) # define BRAIND BIT(7) #define SYNCREG 0x21 /* R/W */ # define SYNCREG_OFFSET_MASK 0x0f # define SYNCREG_PERIOD_MASK 0xf0 # define SYNCREG_PERIOD_SHIFT 4 #define SCSIDATALATCH 0x22 /* W */ #define SCSIDATAIN 0x22 /* R */ #define SCSIDATAWITHACK 0x23 /* R/W */ #define SCAMCONTROL 0x24 /* W */ #define SCAMSTATUS 0x24 /* R */ #define SCAMDATA 0x25 /* R/W */ #define OTHERCONTROL 0x26 /* R/W */ # define TPL_ROM_WRITE_EN BIT(0) # define TPWR_OUT BIT(1) # define TPWR_SENSE BIT(2) # define RA8_CONTROL BIT(3) #define ACKWIDTH 0x27 /* R/W */ #define CLRTESTPNT 0x28 /* W */ #define ACKCNTLD 0x29 /* W */ #define REQCNTLD 0x2A /* W */ #define HSTCNTLD 0x2B /* W */ #define CHECKSUM 0x2C /* R/W */ /************************************************************************ * Input status bit definitions. ************************************************************************/ #define S_MESSAGE BIT(0) /* Message line from SCSI bus */ #define S_IO BIT(1) /* Input/Output line from SCSI bus */ #define S_CD BIT(2) /* Command/Data line from SCSI bus */ #define S_BUSY BIT(3) /* Busy line from SCSI bus */ #define S_ACK BIT(4) /* Acknowledge line from SCSI bus */ #define S_REQUEST BIT(5) /* Request line from SCSI bus */ #define S_SELECT BIT(6) /* */ #define S_ATN BIT(7) /* */ /*********************************************************************** * Useful Bus Monitor status combinations. ***********************************************************************/ #define BUSMON_SEL S_SELECT #define BUSMON_BSY S_BUSY #define BUSMON_REQ S_REQUEST #define BUSMON_IO S_IO #define BUSMON_ACK S_ACK #define BUSMON_BUS_FREE 0 #define BUSMON_COMMAND ( S_BUSY | S_CD | S_REQUEST ) #define BUSMON_MESSAGE_IN ( S_BUSY | S_CD | S_IO | S_MESSAGE | S_REQUEST ) #define BUSMON_MESSAGE_OUT ( S_BUSY | S_CD | S_MESSAGE | S_REQUEST ) #define BUSMON_DATA_IN ( S_BUSY | S_IO | S_REQUEST ) #define BUSMON_DATA_OUT ( S_BUSY | S_REQUEST ) #define BUSMON_STATUS ( S_BUSY | S_CD | S_IO | S_REQUEST ) #define BUSMON_SELECT ( S_IO | S_SELECT ) #define BUSMON_RESELECT ( S_IO | S_SELECT ) #define BUSMON_PHASE_MASK ( S_CD | S_IO | S_MESSAGE | S_SELECT ) #define BUSPHASE_SELECT ( BUSMON_SELECT & BUSMON_PHASE_MASK ) #define BUSPHASE_COMMAND ( BUSMON_COMMAND & BUSMON_PHASE_MASK ) #define BUSPHASE_MESSAGE_IN ( BUSMON_MESSAGE_IN & BUSMON_PHASE_MASK ) #define BUSPHASE_MESSAGE_OUT ( BUSMON_MESSAGE_OUT & BUSMON_PHASE_MASK ) #define BUSPHASE_DATA_IN ( BUSMON_DATA_IN & BUSMON_PHASE_MASK ) #define BUSPHASE_DATA_OUT ( BUSMON_DATA_OUT & BUSMON_PHASE_MASK ) #define BUSPHASE_STATUS ( BUSMON_STATUS & BUSMON_PHASE_MASK ) /*====================================================================*/ typedef struct scsi_info_t { struct pcmcia_device *p_dev; struct Scsi_Host *host; int stop; } scsi_info_t; /* synchronous transfer negotiation data */ typedef struct _sync_data { unsigned int SyncNegotiation; #define SYNC_NOT_YET 0 #define SYNC_OK 1 #define SYNC_NG 2 unsigned int SyncPeriod; unsigned int SyncOffset; unsigned char SyncRegister; unsigned char AckWidth; } sync_data; typedef struct _nsp_hw_data { unsigned int BaseAddress; unsigned int NumAddress; unsigned int IrqNumber; unsigned long MmioAddress; #define NSP_MMIO_OFFSET 0x0800 unsigned long MmioLength; unsigned char ScsiClockDiv; unsigned char TransferMode; int TimerCount; int SelectionTimeOut; struct scsi_cmnd *CurrentSC; //int CurrnetTarget; int FifoCount; #define MSGBUF_SIZE 20 unsigned char MsgBuffer[MSGBUF_SIZE]; int MsgLen; #define N_TARGET 8 sync_data Sync[N_TARGET]; char nspinfo[110]; /* description */ spinlock_t Lock; scsi_info_t *ScsiInfo; /* attach <-> detect glue */ #ifdef NSP_DEBUG int CmdId; /* Accepted command serial number. Used for debugging. */ #endif } nsp_hw_data; /**************************************************************************** * */ /* Card service functions */ static void nsp_cs_detach (struct pcmcia_device *p_dev); static void nsp_cs_release(struct pcmcia_device *link); static int nsp_cs_config (struct pcmcia_device *link); /* Linux SCSI subsystem specific functions */ static struct Scsi_Host *nsp_detect (struct scsi_host_template *sht); static const char *nsp_info (struct Scsi_Host *shpnt); static int nsp_show_info (struct seq_file *m, struct Scsi_Host *host); static int nsp_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *SCpnt); /* Error handler */ /*static int nsp_eh_abort (struct scsi_cmnd *SCpnt);*/ /*static int nsp_eh_device_reset(struct scsi_cmnd *SCpnt);*/ static int nsp_eh_bus_reset (struct scsi_cmnd *SCpnt); static int nsp_eh_host_reset (struct scsi_cmnd *SCpnt); static int nsp_bus_reset (nsp_hw_data *data); /* */ static int nsphw_init (nsp_hw_data *data); static int nsphw_start_selection(struct scsi_cmnd *SCpnt); static void nsp_start_timer (struct scsi_cmnd *SCpnt, int time); static int nsp_fifo_count (struct scsi_cmnd *SCpnt); static void nsp_pio_read (struct scsi_cmnd *SCpnt); static void nsp_pio_write (struct scsi_cmnd *SCpnt); static int nsp_nexus (struct scsi_cmnd *SCpnt); static void nsp_scsi_done (struct scsi_cmnd *SCpnt); static int nsp_analyze_sdtr (struct scsi_cmnd *SCpnt); static int nsp_negate_signal (struct scsi_cmnd *SCpnt, unsigned char mask, char *str); static int nsp_expect_signal (struct scsi_cmnd *SCpnt, unsigned char current_phase, unsigned char mask); static int nsp_xfer (struct scsi_cmnd *SCpnt, int phase); static int nsp_dataphase_bypass (struct scsi_cmnd *SCpnt); static int nsp_reselected (struct scsi_cmnd *SCpnt); static struct Scsi_Host *nsp_detect(struct scsi_host_template *sht); /* Interrupt handler */ //static irqreturn_t nspintr(int irq, void *dev_id); /* Debug */ #ifdef NSP_DEBUG static void show_command (struct scsi_cmnd *SCpnt); static void show_phase (struct scsi_cmnd *SCpnt); static void show_busphase(unsigned char stat); static void show_message (nsp_hw_data *data); #else # define show_command(ptr) /* */ # define show_phase(SCpnt) /* */ # define show_busphase(stat) /* */ # define show_message(data) /* */ #endif /* * SCSI phase */ enum _scsi_phase { PH_UNDETERMINED , PH_ARBSTART , PH_SELSTART , PH_SELECTED , PH_COMMAND , PH_DATA , PH_STATUS , PH_MSG_IN , PH_MSG_OUT , PH_DISCONNECT , PH_RESELECT , PH_ABORT , PH_RESET }; enum _data_in_out { IO_UNKNOWN, IO_IN, IO_OUT }; enum _burst_mode { BURST_IO8 = 0, BURST_IO32 = 1, BURST_MEM32 = 2, }; /************************************************************************** * SCSI messaage */ #define MSG_COMMAND_COMPLETE 0x00 #define MSG_EXTENDED 0x01 #define MSG_ABORT 0x06 #define MSG_NO_OPERATION 0x08 #define MSG_BUS_DEVICE_RESET 0x0c #define MSG_EXT_SDTR 0x01 /* scatter-gather table */ # define BUFFER_ADDR ((char *)((sg_virt(SCpnt->SCp.buffer)))) #endif /*__nsp_cs__*/ /* end */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1