Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Hannes Reinecke | 1395 | 74.80% | 1 | 5.26% |
Damien Le Moal | 313 | 16.78% | 11 | 57.89% |
Christoph Hellwig | 126 | 6.76% | 4 | 21.05% |
Bart Van Assche | 16 | 0.86% | 1 | 5.26% |
Masato Suzuki | 13 | 0.70% | 1 | 5.26% |
Thomas Gleixner | 2 | 0.11% | 1 | 5.26% |
Total | 1865 | 19 |
// SPDX-License-Identifier: GPL-2.0-only /* * SCSI Zoned Block commands * * Copyright (C) 2014-2015 SUSE Linux GmbH * Written by: Hannes Reinecke <hare@suse.de> * Modified by: Damien Le Moal <damien.lemoal@hgst.com> * Modified by: Shaun Tancheff <shaun.tancheff@seagate.com> */ #include <linux/blkdev.h> #include <asm/unaligned.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> #include "sd.h" /** * sd_zbc_parse_report - Convert a zone descriptor to a struct blk_zone, * @sdkp: The disk the report originated from * @buf: Address of the report zone descriptor * @zone: the destination zone structure * * All LBA sized values are converted to 512B sectors unit. */ static void sd_zbc_parse_report(struct scsi_disk *sdkp, u8 *buf, struct blk_zone *zone) { struct scsi_device *sdp = sdkp->device; memset(zone, 0, sizeof(struct blk_zone)); zone->type = buf[0] & 0x0f; zone->cond = (buf[1] >> 4) & 0xf; if (buf[1] & 0x01) zone->reset = 1; if (buf[1] & 0x02) zone->non_seq = 1; zone->len = logical_to_sectors(sdp, get_unaligned_be64(&buf[8])); zone->start = logical_to_sectors(sdp, get_unaligned_be64(&buf[16])); zone->wp = logical_to_sectors(sdp, get_unaligned_be64(&buf[24])); if (zone->type != ZBC_ZONE_TYPE_CONV && zone->cond == ZBC_ZONE_COND_FULL) zone->wp = zone->start + zone->len; } /** * sd_zbc_do_report_zones - Issue a REPORT ZONES scsi command. * @sdkp: The target disk * @buf: Buffer to use for the reply * @buflen: the buffer size * @lba: Start LBA of the report * @partial: Do partial report * * For internal use during device validation. * Using partial=true can significantly speed up execution of a report zones * command because the disk does not have to count all possible report matching * zones and will only report the count of zones fitting in the command reply * buffer. */ static int sd_zbc_do_report_zones(struct scsi_disk *sdkp, unsigned char *buf, unsigned int buflen, sector_t lba, bool partial) { struct scsi_device *sdp = sdkp->device; const int timeout = sdp->request_queue->rq_timeout; struct scsi_sense_hdr sshdr; unsigned char cmd[16]; unsigned int rep_len; int result; memset(cmd, 0, 16); cmd[0] = ZBC_IN; cmd[1] = ZI_REPORT_ZONES; put_unaligned_be64(lba, &cmd[2]); put_unaligned_be32(buflen, &cmd[10]); if (partial) cmd[14] = ZBC_REPORT_ZONE_PARTIAL; memset(buf, 0, buflen); result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE, buf, buflen, &sshdr, timeout, SD_MAX_RETRIES, NULL); if (result) { sd_printk(KERN_ERR, sdkp, "REPORT ZONES lba %llu failed with %d/%d\n", (unsigned long long)lba, host_byte(result), driver_byte(result)); return -EIO; } rep_len = get_unaligned_be32(&buf[0]); if (rep_len < 64) { sd_printk(KERN_ERR, sdkp, "REPORT ZONES report invalid length %u\n", rep_len); return -EIO; } return 0; } /** * sd_zbc_report_zones - Disk report zones operation. * @disk: The target disk * @sector: Start 512B sector of the report * @zones: Array of zone descriptors * @nr_zones: Number of descriptors in the array * @gfp_mask: Memory allocation mask * * Execute a report zones command on the target disk. */ int sd_zbc_report_zones(struct gendisk *disk, sector_t sector, struct blk_zone *zones, unsigned int *nr_zones, gfp_t gfp_mask) { struct scsi_disk *sdkp = scsi_disk(disk); unsigned int i, buflen, nrz = *nr_zones; unsigned char *buf; size_t offset = 0; int ret = 0; if (!sd_is_zoned(sdkp)) /* Not a zoned device */ return -EOPNOTSUPP; /* * Get a reply buffer for the number of requested zones plus a header, * without exceeding the device maximum command size. For ATA disks, * buffers must be aligned to 512B. */ buflen = min(queue_max_hw_sectors(disk->queue) << 9, roundup((nrz + 1) * 64, 512)); buf = kmalloc(buflen, gfp_mask); if (!buf) return -ENOMEM; ret = sd_zbc_do_report_zones(sdkp, buf, buflen, sectors_to_logical(sdkp->device, sector), true); if (ret) goto out_free_buf; nrz = min(nrz, get_unaligned_be32(&buf[0]) / 64); for (i = 0; i < nrz; i++) { offset += 64; sd_zbc_parse_report(sdkp, buf + offset, zones); zones++; } *nr_zones = nrz; out_free_buf: kfree(buf); return ret; } /** * sd_zbc_zone_sectors - Get the device zone size in number of 512B sectors. * @sdkp: The target disk */ static inline sector_t sd_zbc_zone_sectors(struct scsi_disk *sdkp) { return logical_to_sectors(sdkp->device, sdkp->zone_blocks); } /** * sd_zbc_setup_reset_cmnd - Prepare a RESET WRITE POINTER scsi command. * @cmd: the command to setup * * Called from sd_init_command() for a REQ_OP_ZONE_RESET request. */ blk_status_t sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd) { struct request *rq = cmd->request; struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); sector_t sector = blk_rq_pos(rq); sector_t block = sectors_to_logical(sdkp->device, sector); if (!sd_is_zoned(sdkp)) /* Not a zoned device */ return BLK_STS_IOERR; if (sdkp->device->changed) return BLK_STS_IOERR; if (sector & (sd_zbc_zone_sectors(sdkp) - 1)) /* Unaligned request */ return BLK_STS_IOERR; cmd->cmd_len = 16; memset(cmd->cmnd, 0, cmd->cmd_len); cmd->cmnd[0] = ZBC_OUT; cmd->cmnd[1] = ZO_RESET_WRITE_POINTER; put_unaligned_be64(block, &cmd->cmnd[2]); rq->timeout = SD_TIMEOUT; cmd->sc_data_direction = DMA_NONE; cmd->transfersize = 0; cmd->allowed = 0; return BLK_STS_OK; } /** * sd_zbc_complete - ZBC command post processing. * @cmd: Completed command * @good_bytes: Command reply bytes * @sshdr: command sense header * * Called from sd_done(). Process report zones reply and handle reset zone * and write commands errors. */ void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes, struct scsi_sense_hdr *sshdr) { int result = cmd->result; struct request *rq = cmd->request; switch (req_op(rq)) { case REQ_OP_ZONE_RESET: if (result && sshdr->sense_key == ILLEGAL_REQUEST && sshdr->asc == 0x24) /* * INVALID FIELD IN CDB error: reset of a conventional * zone was attempted. Nothing to worry about, so be * quiet about the error. */ rq->rq_flags |= RQF_QUIET; break; case REQ_OP_WRITE: case REQ_OP_WRITE_ZEROES: case REQ_OP_WRITE_SAME: break; } } /** * sd_zbc_check_zoned_characteristics - Check zoned block device characteristics * @sdkp: Target disk * @buf: Buffer where to store the VPD page data * * Read VPD page B6, get information and check that reads are unconstrained. */ static int sd_zbc_check_zoned_characteristics(struct scsi_disk *sdkp, unsigned char *buf) { if (scsi_get_vpd_page(sdkp->device, 0xb6, buf, 64)) { sd_printk(KERN_NOTICE, sdkp, "Read zoned characteristics VPD page failed\n"); return -ENODEV; } if (sdkp->device->type != TYPE_ZBC) { /* Host-aware */ sdkp->urswrz = 1; sdkp->zones_optimal_open = get_unaligned_be32(&buf[8]); sdkp->zones_optimal_nonseq = get_unaligned_be32(&buf[12]); sdkp->zones_max_open = 0; } else { /* Host-managed */ sdkp->urswrz = buf[4] & 1; sdkp->zones_optimal_open = 0; sdkp->zones_optimal_nonseq = 0; sdkp->zones_max_open = get_unaligned_be32(&buf[16]); } /* * Check for unconstrained reads: host-managed devices with * constrained reads (drives failing read after write pointer) * are not supported. */ if (!sdkp->urswrz) { if (sdkp->first_scan) sd_printk(KERN_NOTICE, sdkp, "constrained reads devices are not supported\n"); return -ENODEV; } return 0; } #define SD_ZBC_BUF_SIZE 131072U /** * sd_zbc_check_zones - Check the device capacity and zone sizes * @sdkp: Target disk * * Check that the device capacity as reported by READ CAPACITY matches the * max_lba value (plus one)of the report zones command reply. Also check that * all zones of the device have an equal size, only allowing the last zone of * the disk to have a smaller size (runt zone). The zone size must also be a * power of two. * * Returns the zone size in number of blocks upon success or an error code * upon failure. */ static int sd_zbc_check_zones(struct scsi_disk *sdkp, u32 *zblocks) { u64 zone_blocks = 0; sector_t max_lba, block = 0; unsigned char *buf; unsigned char *rec; unsigned int buf_len; unsigned int list_length; int ret; u8 same; /* Get a buffer */ buf = kmalloc(SD_ZBC_BUF_SIZE, GFP_KERNEL); if (!buf) return -ENOMEM; /* Do a report zone to get max_lba and the same field */ ret = sd_zbc_do_report_zones(sdkp, buf, SD_ZBC_BUF_SIZE, 0, false); if (ret) goto out_free; if (sdkp->rc_basis == 0) { /* The max_lba field is the capacity of this device */ max_lba = get_unaligned_be64(&buf[8]); if (sdkp->capacity != max_lba + 1) { if (sdkp->first_scan) sd_printk(KERN_WARNING, sdkp, "Changing capacity from %llu to max LBA+1 %llu\n", (unsigned long long)sdkp->capacity, (unsigned long long)max_lba + 1); sdkp->capacity = max_lba + 1; } } /* * Check same field: for any value other than 0, we know that all zones * have the same size. */ same = buf[4] & 0x0f; if (same > 0) { rec = &buf[64]; zone_blocks = get_unaligned_be64(&rec[8]); goto out; } /* * Check the size of all zones: all zones must be of * equal size, except the last zone which can be smaller * than other zones. */ do { /* Parse REPORT ZONES header */ list_length = get_unaligned_be32(&buf[0]) + 64; rec = buf + 64; buf_len = min(list_length, SD_ZBC_BUF_SIZE); /* Parse zone descriptors */ while (rec < buf + buf_len) { u64 this_zone_blocks = get_unaligned_be64(&rec[8]); if (zone_blocks == 0) { zone_blocks = this_zone_blocks; } else if (this_zone_blocks != zone_blocks && (block + this_zone_blocks < sdkp->capacity || this_zone_blocks > zone_blocks)) { zone_blocks = 0; goto out; } block += this_zone_blocks; rec += 64; } if (block < sdkp->capacity) { ret = sd_zbc_do_report_zones(sdkp, buf, SD_ZBC_BUF_SIZE, block, true); if (ret) goto out_free; } } while (block < sdkp->capacity); out: if (!zone_blocks) { if (sdkp->first_scan) sd_printk(KERN_NOTICE, sdkp, "Devices with non constant zone " "size are not supported\n"); ret = -ENODEV; } else if (!is_power_of_2(zone_blocks)) { if (sdkp->first_scan) sd_printk(KERN_NOTICE, sdkp, "Devices with non power of 2 zone " "size are not supported\n"); ret = -ENODEV; } else if (logical_to_sectors(sdkp->device, zone_blocks) > UINT_MAX) { if (sdkp->first_scan) sd_printk(KERN_NOTICE, sdkp, "Zone size too large\n"); ret = -EFBIG; } else { *zblocks = zone_blocks; ret = 0; } out_free: kfree(buf); return ret; } int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buf) { struct gendisk *disk = sdkp->disk; unsigned int nr_zones; u32 zone_blocks; int ret; if (!sd_is_zoned(sdkp)) /* * Device managed or normal SCSI disk, * no special handling required */ return 0; /* Check zoned block device characteristics (unconstrained reads) */ ret = sd_zbc_check_zoned_characteristics(sdkp, buf); if (ret) goto err; /* * Check zone size: only devices with a constant zone size (except * an eventual last runt zone) that is a power of 2 are supported. */ ret = sd_zbc_check_zones(sdkp, &zone_blocks); if (ret != 0) goto err; /* The drive satisfies the kernel restrictions: set it up */ blk_queue_chunk_sectors(sdkp->disk->queue, logical_to_sectors(sdkp->device, zone_blocks)); nr_zones = round_up(sdkp->capacity, zone_blocks) >> ilog2(zone_blocks); /* READ16/WRITE16 is mandatory for ZBC disks */ sdkp->device->use_16_for_rw = 1; sdkp->device->use_10_for_rw = 0; /* * Revalidate the disk zone bitmaps once the block device capacity is * set on the second revalidate execution during disk scan and if * something changed when executing a normal revalidate. */ if (sdkp->first_scan) { sdkp->zone_blocks = zone_blocks; sdkp->nr_zones = nr_zones; return 0; } if (sdkp->zone_blocks != zone_blocks || sdkp->nr_zones != nr_zones || disk->queue->nr_zones != nr_zones) { ret = blk_revalidate_disk_zones(disk); if (ret != 0) goto err; sdkp->zone_blocks = zone_blocks; sdkp->nr_zones = nr_zones; } return 0; err: sdkp->capacity = 0; return ret; } void sd_zbc_print_zones(struct scsi_disk *sdkp) { if (!sd_is_zoned(sdkp) || !sdkp->capacity) return; if (sdkp->capacity & (sdkp->zone_blocks - 1)) sd_printk(KERN_NOTICE, sdkp, "%u zones of %u logical blocks + 1 runt zone\n", sdkp->nr_zones - 1, sdkp->zone_blocks); else sd_printk(KERN_NOTICE, sdkp, "%u zones of %u logical blocks\n", sdkp->nr_zones, sdkp->zone_blocks); }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1