Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Brian Norris | 1458 | 99.45% | 1 | 25.00% |
Julia Lawall | 6 | 0.41% | 2 | 50.00% |
Thomas Gleixner | 2 | 0.14% | 1 | 25.00% |
Total | 1466 | 4 |
// SPDX-License-Identifier: GPL-2.0-only /* * Broadcom STB AVS TMON thermal sensor driver * * Copyright (c) 2015-2017 Broadcom */ #define DRV_NAME "brcmstb_thermal" #define pr_fmt(fmt) DRV_NAME ": " fmt #include <linux/bitops.h> #include <linux/device.h> #include <linux/err.h> #include <linux/io.h> #include <linux/irqreturn.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/of_device.h> #include <linux/thermal.h> #define AVS_TMON_STATUS 0x00 #define AVS_TMON_STATUS_valid_msk BIT(11) #define AVS_TMON_STATUS_data_msk GENMASK(10, 1) #define AVS_TMON_STATUS_data_shift 1 #define AVS_TMON_EN_OVERTEMP_RESET 0x04 #define AVS_TMON_EN_OVERTEMP_RESET_msk BIT(0) #define AVS_TMON_RESET_THRESH 0x08 #define AVS_TMON_RESET_THRESH_msk GENMASK(10, 1) #define AVS_TMON_RESET_THRESH_shift 1 #define AVS_TMON_INT_IDLE_TIME 0x10 #define AVS_TMON_EN_TEMP_INT_SRCS 0x14 #define AVS_TMON_EN_TEMP_INT_SRCS_high BIT(1) #define AVS_TMON_EN_TEMP_INT_SRCS_low BIT(0) #define AVS_TMON_INT_THRESH 0x18 #define AVS_TMON_INT_THRESH_high_msk GENMASK(26, 17) #define AVS_TMON_INT_THRESH_high_shift 17 #define AVS_TMON_INT_THRESH_low_msk GENMASK(10, 1) #define AVS_TMON_INT_THRESH_low_shift 1 #define AVS_TMON_TEMP_INT_CODE 0x1c #define AVS_TMON_TP_TEST_ENABLE 0x20 /* Default coefficients */ #define AVS_TMON_TEMP_SLOPE -487 #define AVS_TMON_TEMP_OFFSET 410040 /* HW related temperature constants */ #define AVS_TMON_TEMP_MAX 0x3ff #define AVS_TMON_TEMP_MIN -88161 #define AVS_TMON_TEMP_MASK AVS_TMON_TEMP_MAX enum avs_tmon_trip_type { TMON_TRIP_TYPE_LOW = 0, TMON_TRIP_TYPE_HIGH, TMON_TRIP_TYPE_RESET, TMON_TRIP_TYPE_MAX, }; struct avs_tmon_trip { /* HW bit to enable the trip */ u32 enable_offs; u32 enable_mask; /* HW field to read the trip temperature */ u32 reg_offs; u32 reg_msk; int reg_shift; }; static struct avs_tmon_trip avs_tmon_trips[] = { /* Trips when temperature is below threshold */ [TMON_TRIP_TYPE_LOW] = { .enable_offs = AVS_TMON_EN_TEMP_INT_SRCS, .enable_mask = AVS_TMON_EN_TEMP_INT_SRCS_low, .reg_offs = AVS_TMON_INT_THRESH, .reg_msk = AVS_TMON_INT_THRESH_low_msk, .reg_shift = AVS_TMON_INT_THRESH_low_shift, }, /* Trips when temperature is above threshold */ [TMON_TRIP_TYPE_HIGH] = { .enable_offs = AVS_TMON_EN_TEMP_INT_SRCS, .enable_mask = AVS_TMON_EN_TEMP_INT_SRCS_high, .reg_offs = AVS_TMON_INT_THRESH, .reg_msk = AVS_TMON_INT_THRESH_high_msk, .reg_shift = AVS_TMON_INT_THRESH_high_shift, }, /* Automatically resets chip when above threshold */ [TMON_TRIP_TYPE_RESET] = { .enable_offs = AVS_TMON_EN_OVERTEMP_RESET, .enable_mask = AVS_TMON_EN_OVERTEMP_RESET_msk, .reg_offs = AVS_TMON_RESET_THRESH, .reg_msk = AVS_TMON_RESET_THRESH_msk, .reg_shift = AVS_TMON_RESET_THRESH_shift, }, }; struct brcmstb_thermal_priv { void __iomem *tmon_base; struct device *dev; struct thermal_zone_device *thermal; }; static void avs_tmon_get_coeffs(struct thermal_zone_device *tz, int *slope, int *offset) { *slope = thermal_zone_get_slope(tz); *offset = thermal_zone_get_offset(tz); } /* Convert a HW code to a temperature reading (millidegree celsius) */ static inline int avs_tmon_code_to_temp(struct thermal_zone_device *tz, u32 code) { const int val = code & AVS_TMON_TEMP_MASK; int slope, offset; avs_tmon_get_coeffs(tz, &slope, &offset); return slope * val + offset; } /* * Convert a temperature value (millidegree celsius) to a HW code * * @temp: temperature to convert * @low: if true, round toward the low side */ static inline u32 avs_tmon_temp_to_code(struct thermal_zone_device *tz, int temp, bool low) { int slope, offset; if (temp < AVS_TMON_TEMP_MIN) return AVS_TMON_TEMP_MAX; /* Maximum code value */ avs_tmon_get_coeffs(tz, &slope, &offset); if (temp >= offset) return 0; /* Minimum code value */ if (low) return (u32)(DIV_ROUND_UP(offset - temp, abs(slope))); else return (u32)((offset - temp) / abs(slope)); } static int brcmstb_get_temp(void *data, int *temp) { struct brcmstb_thermal_priv *priv = data; u32 val; long t; val = __raw_readl(priv->tmon_base + AVS_TMON_STATUS); if (!(val & AVS_TMON_STATUS_valid_msk)) { dev_err(priv->dev, "reading not valid\n"); return -EIO; } val = (val & AVS_TMON_STATUS_data_msk) >> AVS_TMON_STATUS_data_shift; t = avs_tmon_code_to_temp(priv->thermal, val); if (t < 0) *temp = 0; else *temp = t; return 0; } static void avs_tmon_trip_enable(struct brcmstb_thermal_priv *priv, enum avs_tmon_trip_type type, int en) { struct avs_tmon_trip *trip = &avs_tmon_trips[type]; u32 val = __raw_readl(priv->tmon_base + trip->enable_offs); dev_dbg(priv->dev, "%sable trip, type %d\n", en ? "en" : "dis", type); if (en) val |= trip->enable_mask; else val &= ~trip->enable_mask; __raw_writel(val, priv->tmon_base + trip->enable_offs); } static int avs_tmon_get_trip_temp(struct brcmstb_thermal_priv *priv, enum avs_tmon_trip_type type) { struct avs_tmon_trip *trip = &avs_tmon_trips[type]; u32 val = __raw_readl(priv->tmon_base + trip->reg_offs); val &= trip->reg_msk; val >>= trip->reg_shift; return avs_tmon_code_to_temp(priv->thermal, val); } static void avs_tmon_set_trip_temp(struct brcmstb_thermal_priv *priv, enum avs_tmon_trip_type type, int temp) { struct avs_tmon_trip *trip = &avs_tmon_trips[type]; u32 val, orig; dev_dbg(priv->dev, "set temp %d to %d\n", type, temp); /* round toward low temp for the low interrupt */ val = avs_tmon_temp_to_code(priv->thermal, temp, type == TMON_TRIP_TYPE_LOW); val <<= trip->reg_shift; val &= trip->reg_msk; orig = __raw_readl(priv->tmon_base + trip->reg_offs); orig &= ~trip->reg_msk; orig |= val; __raw_writel(orig, priv->tmon_base + trip->reg_offs); } static int avs_tmon_get_intr_temp(struct brcmstb_thermal_priv *priv) { u32 val; val = __raw_readl(priv->tmon_base + AVS_TMON_TEMP_INT_CODE); return avs_tmon_code_to_temp(priv->thermal, val); } static irqreturn_t brcmstb_tmon_irq_thread(int irq, void *data) { struct brcmstb_thermal_priv *priv = data; int low, high, intr; low = avs_tmon_get_trip_temp(priv, TMON_TRIP_TYPE_LOW); high = avs_tmon_get_trip_temp(priv, TMON_TRIP_TYPE_HIGH); intr = avs_tmon_get_intr_temp(priv); dev_dbg(priv->dev, "low/intr/high: %d/%d/%d\n", low, intr, high); /* Disable high-temp until next threshold shift */ if (intr >= high) avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0); /* Disable low-temp until next threshold shift */ if (intr <= low) avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0); /* * Notify using the interrupt temperature, in case the temperature * changes before it can next be read out */ thermal_zone_device_update(priv->thermal, intr); return IRQ_HANDLED; } static int brcmstb_set_trips(void *data, int low, int high) { struct brcmstb_thermal_priv *priv = data; dev_dbg(priv->dev, "set trips %d <--> %d\n", low, high); /* * Disable low-temp if "low" is too small. As per thermal framework * API, we use -INT_MAX rather than INT_MIN. */ if (low <= -INT_MAX) { avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0); } else { avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_LOW, low); avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 1); } /* Disable high-temp if "high" is too big. */ if (high == INT_MAX) { avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0); } else { avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_HIGH, high); avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 1); } return 0; } static const struct thermal_zone_of_device_ops of_ops = { .get_temp = brcmstb_get_temp, .set_trips = brcmstb_set_trips, }; static const struct of_device_id brcmstb_thermal_id_table[] = { { .compatible = "brcm,avs-tmon" }, {}, }; MODULE_DEVICE_TABLE(of, brcmstb_thermal_id_table); static int brcmstb_thermal_probe(struct platform_device *pdev) { struct thermal_zone_device *thermal; struct brcmstb_thermal_priv *priv; struct resource *res; int irq, ret; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); priv->tmon_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv->tmon_base)) return PTR_ERR(priv->tmon_base); priv->dev = &pdev->dev; platform_set_drvdata(pdev, priv); thermal = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &of_ops); if (IS_ERR(thermal)) { ret = PTR_ERR(thermal); dev_err(&pdev->dev, "could not register sensor: %d\n", ret); return ret; } priv->thermal = thermal; irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(&pdev->dev, "could not get IRQ\n"); return irq; } ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, brcmstb_tmon_irq_thread, IRQF_ONESHOT, DRV_NAME, priv); if (ret < 0) { dev_err(&pdev->dev, "could not request IRQ: %d\n", ret); return ret; } dev_info(&pdev->dev, "registered AVS TMON of-sensor driver\n"); return 0; } static struct platform_driver brcmstb_thermal_driver = { .probe = brcmstb_thermal_probe, .driver = { .name = DRV_NAME, .of_match_table = brcmstb_thermal_id_table, }, }; module_platform_driver(brcmstb_thermal_driver); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Brian Norris"); MODULE_DESCRIPTION("Broadcom STB AVS TMON thermal driver");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1