Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Hongbo Zhang | 2382 | 98.07% | 1 | 11.11% |
Axel Lin | 28 | 1.15% | 2 | 22.22% |
Javier Martinez Canillas | 7 | 0.29% | 1 | 11.11% |
Sachin Kamat | 3 | 0.12% | 1 | 11.11% |
Sascha Hauer | 3 | 0.12% | 1 | 11.11% |
Thomas Gleixner | 2 | 0.08% | 1 | 11.11% |
Srinivas Pandruvada | 2 | 0.08% | 1 | 11.11% |
Kapileshwar Singh | 2 | 0.08% | 1 | 11.11% |
Total | 2429 | 9 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * db8500_thermal.c - DB8500 Thermal Management Implementation * * Copyright (C) 2012 ST-Ericsson * Copyright (C) 2012 Linaro Ltd. * * Author: Hongbo Zhang <hongbo.zhang@linaro.com> */ #include <linux/cpu_cooling.h> #include <linux/interrupt.h> #include <linux/mfd/dbx500-prcmu.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_data/db8500_thermal.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/thermal.h> #define PRCMU_DEFAULT_MEASURE_TIME 0xFFF #define PRCMU_DEFAULT_LOW_TEMP 0 struct db8500_thermal_zone { struct thermal_zone_device *therm_dev; struct mutex th_lock; struct work_struct therm_work; struct db8500_thsens_platform_data *trip_tab; enum thermal_device_mode mode; enum thermal_trend trend; unsigned long cur_temp_pseudo; unsigned int cur_index; }; /* Local function to check if thermal zone matches cooling devices */ static int db8500_thermal_match_cdev(struct thermal_cooling_device *cdev, struct db8500_trip_point *trip_point) { int i; if (!strlen(cdev->type)) return -EINVAL; for (i = 0; i < COOLING_DEV_MAX; i++) { if (!strcmp(trip_point->cdev_name[i], cdev->type)) return 0; } return -ENODEV; } /* Callback to bind cooling device to thermal zone */ static int db8500_cdev_bind(struct thermal_zone_device *thermal, struct thermal_cooling_device *cdev) { struct db8500_thermal_zone *pzone = thermal->devdata; struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; unsigned long max_state, upper, lower; int i, ret = -EINVAL; cdev->ops->get_max_state(cdev, &max_state); for (i = 0; i < ptrips->num_trips; i++) { if (db8500_thermal_match_cdev(cdev, &ptrips->trip_points[i])) continue; upper = lower = i > max_state ? max_state : i; ret = thermal_zone_bind_cooling_device(thermal, i, cdev, upper, lower, THERMAL_WEIGHT_DEFAULT); dev_info(&cdev->device, "%s bind to %d: %d-%s\n", cdev->type, i, ret, ret ? "fail" : "succeed"); } return ret; } /* Callback to unbind cooling device from thermal zone */ static int db8500_cdev_unbind(struct thermal_zone_device *thermal, struct thermal_cooling_device *cdev) { struct db8500_thermal_zone *pzone = thermal->devdata; struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; int i, ret = -EINVAL; for (i = 0; i < ptrips->num_trips; i++) { if (db8500_thermal_match_cdev(cdev, &ptrips->trip_points[i])) continue; ret = thermal_zone_unbind_cooling_device(thermal, i, cdev); dev_info(&cdev->device, "%s unbind from %d: %s\n", cdev->type, i, ret ? "fail" : "succeed"); } return ret; } /* Callback to get current temperature */ static int db8500_sys_get_temp(struct thermal_zone_device *thermal, int *temp) { struct db8500_thermal_zone *pzone = thermal->devdata; /* * TODO: There is no PRCMU interface to get temperature data currently, * so a pseudo temperature is returned , it works for thermal framework * and this will be fixed when the PRCMU interface is available. */ *temp = pzone->cur_temp_pseudo; return 0; } /* Callback to get temperature changing trend */ static int db8500_sys_get_trend(struct thermal_zone_device *thermal, int trip, enum thermal_trend *trend) { struct db8500_thermal_zone *pzone = thermal->devdata; *trend = pzone->trend; return 0; } /* Callback to get thermal zone mode */ static int db8500_sys_get_mode(struct thermal_zone_device *thermal, enum thermal_device_mode *mode) { struct db8500_thermal_zone *pzone = thermal->devdata; mutex_lock(&pzone->th_lock); *mode = pzone->mode; mutex_unlock(&pzone->th_lock); return 0; } /* Callback to set thermal zone mode */ static int db8500_sys_set_mode(struct thermal_zone_device *thermal, enum thermal_device_mode mode) { struct db8500_thermal_zone *pzone = thermal->devdata; mutex_lock(&pzone->th_lock); pzone->mode = mode; if (mode == THERMAL_DEVICE_ENABLED) schedule_work(&pzone->therm_work); mutex_unlock(&pzone->th_lock); return 0; } /* Callback to get trip point type */ static int db8500_sys_get_trip_type(struct thermal_zone_device *thermal, int trip, enum thermal_trip_type *type) { struct db8500_thermal_zone *pzone = thermal->devdata; struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; if (trip >= ptrips->num_trips) return -EINVAL; *type = ptrips->trip_points[trip].type; return 0; } /* Callback to get trip point temperature */ static int db8500_sys_get_trip_temp(struct thermal_zone_device *thermal, int trip, int *temp) { struct db8500_thermal_zone *pzone = thermal->devdata; struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; if (trip >= ptrips->num_trips) return -EINVAL; *temp = ptrips->trip_points[trip].temp; return 0; } /* Callback to get critical trip point temperature */ static int db8500_sys_get_crit_temp(struct thermal_zone_device *thermal, int *temp) { struct db8500_thermal_zone *pzone = thermal->devdata; struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; int i; for (i = ptrips->num_trips - 1; i > 0; i--) { if (ptrips->trip_points[i].type == THERMAL_TRIP_CRITICAL) { *temp = ptrips->trip_points[i].temp; return 0; } } return -EINVAL; } static struct thermal_zone_device_ops thdev_ops = { .bind = db8500_cdev_bind, .unbind = db8500_cdev_unbind, .get_temp = db8500_sys_get_temp, .get_trend = db8500_sys_get_trend, .get_mode = db8500_sys_get_mode, .set_mode = db8500_sys_set_mode, .get_trip_type = db8500_sys_get_trip_type, .get_trip_temp = db8500_sys_get_trip_temp, .get_crit_temp = db8500_sys_get_crit_temp, }; static void db8500_thermal_update_config(struct db8500_thermal_zone *pzone, unsigned int idx, enum thermal_trend trend, unsigned long next_low, unsigned long next_high) { prcmu_stop_temp_sense(); pzone->cur_index = idx; pzone->cur_temp_pseudo = (next_low + next_high)/2; pzone->trend = trend; prcmu_config_hotmon((u8)(next_low/1000), (u8)(next_high/1000)); prcmu_start_temp_sense(PRCMU_DEFAULT_MEASURE_TIME); } static irqreturn_t prcmu_low_irq_handler(int irq, void *irq_data) { struct db8500_thermal_zone *pzone = irq_data; struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; unsigned int idx = pzone->cur_index; unsigned long next_low, next_high; if (unlikely(idx == 0)) /* Meaningless for thermal management, ignoring it */ return IRQ_HANDLED; if (idx == 1) { next_high = ptrips->trip_points[0].temp; next_low = PRCMU_DEFAULT_LOW_TEMP; } else { next_high = ptrips->trip_points[idx-1].temp; next_low = ptrips->trip_points[idx-2].temp; } idx -= 1; db8500_thermal_update_config(pzone, idx, THERMAL_TREND_DROPPING, next_low, next_high); dev_dbg(&pzone->therm_dev->device, "PRCMU set max %ld, min %ld\n", next_high, next_low); schedule_work(&pzone->therm_work); return IRQ_HANDLED; } static irqreturn_t prcmu_high_irq_handler(int irq, void *irq_data) { struct db8500_thermal_zone *pzone = irq_data; struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; unsigned int idx = pzone->cur_index; unsigned long next_low, next_high; if (idx < ptrips->num_trips - 1) { next_high = ptrips->trip_points[idx+1].temp; next_low = ptrips->trip_points[idx].temp; idx += 1; db8500_thermal_update_config(pzone, idx, THERMAL_TREND_RAISING, next_low, next_high); dev_dbg(&pzone->therm_dev->device, "PRCMU set max %ld, min %ld\n", next_high, next_low); } else if (idx == ptrips->num_trips - 1) pzone->cur_temp_pseudo = ptrips->trip_points[idx].temp + 1; schedule_work(&pzone->therm_work); return IRQ_HANDLED; } static void db8500_thermal_work(struct work_struct *work) { enum thermal_device_mode cur_mode; struct db8500_thermal_zone *pzone; pzone = container_of(work, struct db8500_thermal_zone, therm_work); mutex_lock(&pzone->th_lock); cur_mode = pzone->mode; mutex_unlock(&pzone->th_lock); if (cur_mode == THERMAL_DEVICE_DISABLED) return; thermal_zone_device_update(pzone->therm_dev, THERMAL_EVENT_UNSPECIFIED); dev_dbg(&pzone->therm_dev->device, "thermal work finished.\n"); } #ifdef CONFIG_OF static struct db8500_thsens_platform_data* db8500_thermal_parse_dt(struct platform_device *pdev) { struct db8500_thsens_platform_data *ptrips; struct device_node *np = pdev->dev.of_node; char prop_name[32]; const char *tmp_str; u32 tmp_data; int i, j; ptrips = devm_kzalloc(&pdev->dev, sizeof(*ptrips), GFP_KERNEL); if (!ptrips) return NULL; if (of_property_read_u32(np, "num-trips", &tmp_data)) goto err_parse_dt; if (tmp_data > THERMAL_MAX_TRIPS) goto err_parse_dt; ptrips->num_trips = tmp_data; for (i = 0; i < ptrips->num_trips; i++) { sprintf(prop_name, "trip%d-temp", i); if (of_property_read_u32(np, prop_name, &tmp_data)) goto err_parse_dt; ptrips->trip_points[i].temp = tmp_data; sprintf(prop_name, "trip%d-type", i); if (of_property_read_string(np, prop_name, &tmp_str)) goto err_parse_dt; if (!strcmp(tmp_str, "active")) ptrips->trip_points[i].type = THERMAL_TRIP_ACTIVE; else if (!strcmp(tmp_str, "passive")) ptrips->trip_points[i].type = THERMAL_TRIP_PASSIVE; else if (!strcmp(tmp_str, "hot")) ptrips->trip_points[i].type = THERMAL_TRIP_HOT; else if (!strcmp(tmp_str, "critical")) ptrips->trip_points[i].type = THERMAL_TRIP_CRITICAL; else goto err_parse_dt; sprintf(prop_name, "trip%d-cdev-num", i); if (of_property_read_u32(np, prop_name, &tmp_data)) goto err_parse_dt; if (tmp_data > COOLING_DEV_MAX) goto err_parse_dt; for (j = 0; j < tmp_data; j++) { sprintf(prop_name, "trip%d-cdev-name%d", i, j); if (of_property_read_string(np, prop_name, &tmp_str)) goto err_parse_dt; if (strlen(tmp_str) >= THERMAL_NAME_LENGTH) goto err_parse_dt; strcpy(ptrips->trip_points[i].cdev_name[j], tmp_str); } } return ptrips; err_parse_dt: dev_err(&pdev->dev, "Parsing device tree data error.\n"); return NULL; } #else static inline struct db8500_thsens_platform_data* db8500_thermal_parse_dt(struct platform_device *pdev) { return NULL; } #endif static int db8500_thermal_probe(struct platform_device *pdev) { struct db8500_thermal_zone *pzone = NULL; struct db8500_thsens_platform_data *ptrips = NULL; struct device_node *np = pdev->dev.of_node; int low_irq, high_irq, ret = 0; unsigned long dft_low, dft_high; if (np) ptrips = db8500_thermal_parse_dt(pdev); else ptrips = dev_get_platdata(&pdev->dev); if (!ptrips) return -EINVAL; pzone = devm_kzalloc(&pdev->dev, sizeof(*pzone), GFP_KERNEL); if (!pzone) return -ENOMEM; mutex_init(&pzone->th_lock); mutex_lock(&pzone->th_lock); pzone->mode = THERMAL_DEVICE_DISABLED; pzone->trip_tab = ptrips; INIT_WORK(&pzone->therm_work, db8500_thermal_work); low_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_LOW"); if (low_irq < 0) { dev_err(&pdev->dev, "Get IRQ_HOTMON_LOW failed.\n"); ret = low_irq; goto out_unlock; } ret = devm_request_threaded_irq(&pdev->dev, low_irq, NULL, prcmu_low_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, "dbx500_temp_low", pzone); if (ret < 0) { dev_err(&pdev->dev, "Failed to allocate temp low irq.\n"); goto out_unlock; } high_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_HIGH"); if (high_irq < 0) { dev_err(&pdev->dev, "Get IRQ_HOTMON_HIGH failed.\n"); ret = high_irq; goto out_unlock; } ret = devm_request_threaded_irq(&pdev->dev, high_irq, NULL, prcmu_high_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, "dbx500_temp_high", pzone); if (ret < 0) { dev_err(&pdev->dev, "Failed to allocate temp high irq.\n"); goto out_unlock; } pzone->therm_dev = thermal_zone_device_register("db8500_thermal_zone", ptrips->num_trips, 0, pzone, &thdev_ops, NULL, 0, 0); if (IS_ERR(pzone->therm_dev)) { dev_err(&pdev->dev, "Register thermal zone device failed.\n"); ret = PTR_ERR(pzone->therm_dev); goto out_unlock; } dev_info(&pdev->dev, "Thermal zone device registered.\n"); dft_low = PRCMU_DEFAULT_LOW_TEMP; dft_high = ptrips->trip_points[0].temp; db8500_thermal_update_config(pzone, 0, THERMAL_TREND_STABLE, dft_low, dft_high); platform_set_drvdata(pdev, pzone); pzone->mode = THERMAL_DEVICE_ENABLED; out_unlock: mutex_unlock(&pzone->th_lock); return ret; } static int db8500_thermal_remove(struct platform_device *pdev) { struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev); thermal_zone_device_unregister(pzone->therm_dev); cancel_work_sync(&pzone->therm_work); mutex_destroy(&pzone->th_lock); return 0; } static int db8500_thermal_suspend(struct platform_device *pdev, pm_message_t state) { struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev); flush_work(&pzone->therm_work); prcmu_stop_temp_sense(); return 0; } static int db8500_thermal_resume(struct platform_device *pdev) { struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev); struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; unsigned long dft_low, dft_high; dft_low = PRCMU_DEFAULT_LOW_TEMP; dft_high = ptrips->trip_points[0].temp; db8500_thermal_update_config(pzone, 0, THERMAL_TREND_STABLE, dft_low, dft_high); return 0; } #ifdef CONFIG_OF static const struct of_device_id db8500_thermal_match[] = { { .compatible = "stericsson,db8500-thermal" }, {}, }; MODULE_DEVICE_TABLE(of, db8500_thermal_match); #endif static struct platform_driver db8500_thermal_driver = { .driver = { .name = "db8500-thermal", .of_match_table = of_match_ptr(db8500_thermal_match), }, .probe = db8500_thermal_probe, .suspend = db8500_thermal_suspend, .resume = db8500_thermal_resume, .remove = db8500_thermal_remove, }; module_platform_driver(db8500_thermal_driver); MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>"); MODULE_DESCRIPTION("DB8500 thermal driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1