| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Peter Chen | 1556 | 43.87% | 7 | 17.07% |
| Michael Grzeschik | 327 | 9.22% | 3 | 7.32% |
| Fabien Lahoudere | 289 | 8.15% | 2 | 4.88% |
| Richard Zhao | 264 | 7.44% | 1 | 2.44% |
| Denis Carikli | 255 | 7.19% | 1 | 2.44% |
| Alexander Shiyan | 167 | 4.71% | 2 | 4.88% |
| Stefan Agner | 150 | 4.23% | 1 | 2.44% |
| Sascha Hauer | 138 | 3.89% | 1 | 2.44% |
| Uwe Kleine-König | 77 | 2.17% | 2 | 4.88% |
| Andrey Smirnov | 75 | 2.11% | 1 | 2.44% |
| Li Jun | 60 | 1.69% | 1 | 2.44% |
| Fabio Estevam | 52 | 1.47% | 3 | 7.32% |
| Marc Kleine-Budde | 33 | 0.93% | 2 | 4.88% |
| Philipp Puschmann | 30 | 0.85% | 1 | 2.44% |
| Corentin Labbe | 24 | 0.68% | 1 | 2.44% |
| Michael Trimarchi | 22 | 0.62% | 3 | 7.32% |
| Thierry Reding | 10 | 0.28% | 1 | 2.44% |
| Arnaud Patard | 7 | 0.20% | 1 | 2.44% |
| Nicolas Adell | 5 | 0.14% | 1 | 2.44% |
| Greg Kroah-Hartman | 2 | 0.06% | 2 | 4.88% |
| Alexander Shishkin | 1 | 0.03% | 1 | 2.44% |
| Fengguang Wu | 1 | 0.03% | 1 | 2.44% |
| Marcus Folkesson | 1 | 0.03% | 1 | 2.44% |
| Philipp Zabel | 1 | 0.03% | 1 | 2.44% |
| Total | 3547 | 41 |
// SPDX-License-Identifier: GPL-2.0+ /* * Copyright 2012 Freescale Semiconductor, Inc. */ #include <linux/module.h> #include <linux/of_platform.h> #include <linux/err.h> #include <linux/io.h> #include <linux/delay.h> #include "ci_hdrc_imx.h" #define MX25_USB_PHY_CTRL_OFFSET 0x08 #define MX25_BM_EXTERNAL_VBUS_DIVIDER BIT(23) #define MX25_EHCI_INTERFACE_SINGLE_UNI (2 << 0) #define MX25_EHCI_INTERFACE_DIFF_UNI (0 << 0) #define MX25_EHCI_INTERFACE_MASK (0xf) #define MX25_OTG_SIC_SHIFT 29 #define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT) #define MX25_OTG_PM_BIT BIT(24) #define MX25_OTG_PP_BIT BIT(11) #define MX25_OTG_OCPOL_BIT BIT(3) #define MX25_H1_SIC_SHIFT 21 #define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) #define MX25_H1_PP_BIT BIT(18) #define MX25_H1_PM_BIT BIT(16) #define MX25_H1_IPPUE_UP_BIT BIT(7) #define MX25_H1_IPPUE_DOWN_BIT BIT(6) #define MX25_H1_TLL_BIT BIT(5) #define MX25_H1_USBTE_BIT BIT(4) #define MX25_H1_OCPOL_BIT BIT(2) #define MX27_H1_PM_BIT BIT(8) #define MX27_H2_PM_BIT BIT(16) #define MX27_OTG_PM_BIT BIT(24) #define MX53_USB_OTG_PHY_CTRL_0_OFFSET 0x08 #define MX53_USB_OTG_PHY_CTRL_1_OFFSET 0x0c #define MX53_USB_CTRL_1_OFFSET 0x10 #define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK (0x11 << 2) #define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI BIT(2) #define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK (0x11 << 6) #define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI BIT(6) #define MX53_USB_UH2_CTRL_OFFSET 0x14 #define MX53_USB_UH3_CTRL_OFFSET 0x18 #define MX53_USB_CLKONOFF_CTRL_OFFSET 0x24 #define MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF BIT(21) #define MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF BIT(22) #define MX53_BM_OVER_CUR_DIS_H1 BIT(5) #define MX53_BM_OVER_CUR_DIS_OTG BIT(8) #define MX53_BM_OVER_CUR_DIS_UHx BIT(30) #define MX53_USB_CTRL_1_UH2_ULPI_EN BIT(26) #define MX53_USB_CTRL_1_UH3_ULPI_EN BIT(27) #define MX53_USB_UHx_CTRL_WAKE_UP_EN BIT(7) #define MX53_USB_UHx_CTRL_ULPI_INT_EN BIT(8) #define MX53_USB_PHYCTRL1_PLLDIV_MASK 0x3 #define MX53_USB_PLL_DIV_24_MHZ 0x01 #define MX6_BM_NON_BURST_SETTING BIT(1) #define MX6_BM_OVER_CUR_DIS BIT(7) #define MX6_BM_OVER_CUR_POLARITY BIT(8) #define MX6_BM_PWR_POLARITY BIT(9) #define MX6_BM_WAKEUP_ENABLE BIT(10) #define MX6_BM_UTMI_ON_CLOCK BIT(13) #define MX6_BM_ID_WAKEUP BIT(16) #define MX6_BM_VBUS_WAKEUP BIT(17) #define MX6SX_BM_DPDM_WAKEUP_EN BIT(29) #define MX6_BM_WAKEUP_INTR BIT(31) #define MX6_USB_HSIC_CTRL_OFFSET 0x10 /* Send resume signal without 480Mhz PHY clock */ #define MX6SX_BM_HSIC_AUTO_RESUME BIT(23) /* set before portsc.suspendM = 1 */ #define MX6_BM_HSIC_DEV_CONN BIT(21) /* HSIC enable */ #define MX6_BM_HSIC_EN BIT(12) /* Force HSIC module 480M clock on, even when in Host is in suspend mode */ #define MX6_BM_HSIC_CLK_ON BIT(11) #define MX6_USB_OTG1_PHY_CTRL 0x18 /* For imx6dql, it is host-only controller, for later imx6, it is otg's */ #define MX6_USB_OTG2_PHY_CTRL 0x1c #define MX6SX_USB_VBUS_WAKEUP_SOURCE(v) (v << 8) #define MX6SX_USB_VBUS_WAKEUP_SOURCE_VBUS MX6SX_USB_VBUS_WAKEUP_SOURCE(0) #define MX6SX_USB_VBUS_WAKEUP_SOURCE_AVALID MX6SX_USB_VBUS_WAKEUP_SOURCE(1) #define MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID MX6SX_USB_VBUS_WAKEUP_SOURCE(2) #define MX6SX_USB_VBUS_WAKEUP_SOURCE_SESS_END MX6SX_USB_VBUS_WAKEUP_SOURCE(3) #define VF610_OVER_CUR_DIS BIT(7) #define MX7D_USBNC_USB_CTRL2 0x4 #define MX7D_USB_VBUS_WAKEUP_SOURCE_MASK 0x3 #define MX7D_USB_VBUS_WAKEUP_SOURCE(v) (v << 0) #define MX7D_USB_VBUS_WAKEUP_SOURCE_VBUS MX7D_USB_VBUS_WAKEUP_SOURCE(0) #define MX7D_USB_VBUS_WAKEUP_SOURCE_AVALID MX7D_USB_VBUS_WAKEUP_SOURCE(1) #define MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID MX7D_USB_VBUS_WAKEUP_SOURCE(2) #define MX7D_USB_VBUS_WAKEUP_SOURCE_SESS_END MX7D_USB_VBUS_WAKEUP_SOURCE(3) struct usbmisc_ops { /* It's called once when probe a usb device */ int (*init)(struct imx_usbmisc_data *data); /* It's called once after adding a usb device */ int (*post)(struct imx_usbmisc_data *data); /* It's called when we need to enable/disable usb wakeup */ int (*set_wakeup)(struct imx_usbmisc_data *data, bool enabled); /* It's called before setting portsc.suspendM */ int (*hsic_set_connect)(struct imx_usbmisc_data *data); /* It's called during suspend/resume */ int (*hsic_set_clk)(struct imx_usbmisc_data *data, bool enabled); }; struct imx_usbmisc { void __iomem *base; spinlock_t lock; const struct usbmisc_ops *ops; }; static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data); static int usbmisc_imx25_init(struct imx_usbmisc_data *data) { struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); unsigned long flags; u32 val = 0; if (data->index > 1) return -EINVAL; spin_lock_irqsave(&usbmisc->lock, flags); switch (data->index) { case 0: val = readl(usbmisc->base); val &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PP_BIT); val |= (MX25_EHCI_INTERFACE_DIFF_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT; val |= (MX25_OTG_PM_BIT | MX25_OTG_OCPOL_BIT); /* * If the polarity is not configured assume active high for * historical reasons. */ if (data->oc_pol_configured && data->oc_pol_active_low) val &= ~MX25_OTG_OCPOL_BIT; writel(val, usbmisc->base); break; case 1: val = readl(usbmisc->base); val &= ~(MX25_H1_SIC_MASK | MX25_H1_PP_BIT | MX25_H1_IPPUE_UP_BIT); val |= (MX25_EHCI_INTERFACE_SINGLE_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT; val |= (MX25_H1_PM_BIT | MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT); /* * If the polarity is not configured assume active high for * historical reasons. */ if (data->oc_pol_configured && data->oc_pol_active_low) val &= ~MX25_H1_OCPOL_BIT; writel(val, usbmisc->base); break; } spin_unlock_irqrestore(&usbmisc->lock, flags); return 0; } static int usbmisc_imx25_post(struct imx_usbmisc_data *data) { struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); void __iomem *reg; unsigned long flags; u32 val; if (data->index > 2) return -EINVAL; if (data->index) return 0; spin_lock_irqsave(&usbmisc->lock, flags); reg = usbmisc->base + MX25_USB_PHY_CTRL_OFFSET; val = readl(reg); if (data->evdo) val |= MX25_BM_EXTERNAL_VBUS_DIVIDER; else val &= ~MX25_BM_EXTERNAL_VBUS_DIVIDER; writel(val, reg); spin_unlock_irqrestore(&usbmisc->lock, flags); usleep_range(5000, 10000); /* needed to stabilize voltage */ return 0; } static int usbmisc_imx27_init(struct imx_usbmisc_data *data) { struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); unsigned long flags; u32 val; switch (data->index) { case 0: val = MX27_OTG_PM_BIT; break; case 1: val = MX27_H1_PM_BIT; break; case 2: val = MX27_H2_PM_BIT; break; default: return -EINVAL; } spin_lock_irqsave(&usbmisc->lock, flags); if (data->disable_oc) val = readl(usbmisc->base) | val; else val = readl(usbmisc->base) & ~val; writel(val, usbmisc->base); spin_unlock_irqrestore(&usbmisc->lock, flags); return 0; } static int usbmisc_imx53_init(struct imx_usbmisc_data *data) { struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); void __iomem *reg = NULL; unsigned long flags; u32 val = 0; if (data->index > 3) return -EINVAL; /* Select a 24 MHz reference clock for the PHY */ val = readl(usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET); val &= ~MX53_USB_PHYCTRL1_PLLDIV_MASK; val |= MX53_USB_PLL_DIV_24_MHZ; writel(val, usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET); spin_lock_irqsave(&usbmisc->lock, flags); switch (data->index) { case 0: if (data->disable_oc) { reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET; val = readl(reg) | MX53_BM_OVER_CUR_DIS_OTG; writel(val, reg); } break; case 1: if (data->disable_oc) { reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET; val = readl(reg) | MX53_BM_OVER_CUR_DIS_H1; writel(val, reg); } break; case 2: if (data->ulpi) { /* set USBH2 into ULPI-mode. */ reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET; val = readl(reg) | MX53_USB_CTRL_1_UH2_ULPI_EN; /* select ULPI clock */ val &= ~MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK; val |= MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI; writel(val, reg); /* Set interrupt wake up enable */ reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET; val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN | MX53_USB_UHx_CTRL_ULPI_INT_EN; writel(val, reg); if (is_imx53_usbmisc(data)) { /* Disable internal 60Mhz clock */ reg = usbmisc->base + MX53_USB_CLKONOFF_CTRL_OFFSET; val = readl(reg) | MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF; writel(val, reg); } } if (data->disable_oc) { reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET; val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx; writel(val, reg); } break; case 3: if (data->ulpi) { /* set USBH3 into ULPI-mode. */ reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET; val = readl(reg) | MX53_USB_CTRL_1_UH3_ULPI_EN; /* select ULPI clock */ val &= ~MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK; val |= MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI; writel(val, reg); /* Set interrupt wake up enable */ reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET; val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN | MX53_USB_UHx_CTRL_ULPI_INT_EN; writel(val, reg); if (is_imx53_usbmisc(data)) { /* Disable internal 60Mhz clock */ reg = usbmisc->base + MX53_USB_CLKONOFF_CTRL_OFFSET; val = readl(reg) | MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF; writel(val, reg); } } if (data->disable_oc) { reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET; val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx; writel(val, reg); } break; } spin_unlock_irqrestore(&usbmisc->lock, flags); return 0; } static int usbmisc_imx6q_set_wakeup (struct imx_usbmisc_data *data, bool enabled) { struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); unsigned long flags; u32 val; u32 wakeup_setting = (MX6_BM_WAKEUP_ENABLE | MX6_BM_VBUS_WAKEUP | MX6_BM_ID_WAKEUP); int ret = 0; if (data->index > 3) return -EINVAL; spin_lock_irqsave(&usbmisc->lock, flags); val = readl(usbmisc->base + data->index * 4); if (enabled) { val |= wakeup_setting; } else { if (val & MX6_BM_WAKEUP_INTR) pr_debug("wakeup int at ci_hdrc.%d\n", data->index); val &= ~wakeup_setting; } writel(val, usbmisc->base + data->index * 4); spin_unlock_irqrestore(&usbmisc->lock, flags); return ret; } static int usbmisc_imx6q_init(struct imx_usbmisc_data *data) { struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); unsigned long flags; u32 reg; if (data->index > 3) return -EINVAL; spin_lock_irqsave(&usbmisc->lock, flags); reg = readl(usbmisc->base + data->index * 4); if (data->disable_oc) { reg |= MX6_BM_OVER_CUR_DIS; } else { reg &= ~MX6_BM_OVER_CUR_DIS; /* * If the polarity is not configured keep it as setup by the * bootloader. */ if (data->oc_pol_configured && data->oc_pol_active_low) reg |= MX6_BM_OVER_CUR_POLARITY; else if (data->oc_pol_configured) reg &= ~MX6_BM_OVER_CUR_POLARITY; } /* If the polarity is not set keep it as setup by the bootlader */ if (data->pwr_pol == 1) reg |= MX6_BM_PWR_POLARITY; writel(reg, usbmisc->base + data->index * 4); /* SoC non-burst setting */ reg = readl(usbmisc->base + data->index * 4); writel(reg | MX6_BM_NON_BURST_SETTING, usbmisc->base + data->index * 4); /* For HSIC controller */ if (data->hsic) { reg = readl(usbmisc->base + data->index * 4); writel(reg | MX6_BM_UTMI_ON_CLOCK, usbmisc->base + data->index * 4); reg = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + (data->index - 2) * 4); reg |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON; writel(reg, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + (data->index - 2) * 4); } spin_unlock_irqrestore(&usbmisc->lock, flags); usbmisc_imx6q_set_wakeup(data, false); return 0; } static int usbmisc_imx6_hsic_get_reg_offset(struct imx_usbmisc_data *data) { int offset, ret = 0; if (data->index == 2 || data->index == 3) { offset = (data->index - 2) * 4; } else if (data->index == 0) { /* * For SoCs like i.MX7D and later, each USB controller has * its own non-core register region. For SoCs before i.MX7D, * the first two USB controllers are non-HSIC controllers. */ offset = 0; } else { dev_err(data->dev, "index is error for usbmisc\n"); ret = -EINVAL; } return ret ? ret : offset; } static int usbmisc_imx6_hsic_set_connect(struct imx_usbmisc_data *data) { unsigned long flags; u32 val; struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); int offset; spin_lock_irqsave(&usbmisc->lock, flags); offset = usbmisc_imx6_hsic_get_reg_offset(data); if (offset < 0) { spin_unlock_irqrestore(&usbmisc->lock, flags); return offset; } val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); if (!(val & MX6_BM_HSIC_DEV_CONN)) writel(val | MX6_BM_HSIC_DEV_CONN, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); spin_unlock_irqrestore(&usbmisc->lock, flags); return 0; } static int usbmisc_imx6_hsic_set_clk(struct imx_usbmisc_data *data, bool on) { unsigned long flags; u32 val; struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); int offset; spin_lock_irqsave(&usbmisc->lock, flags); offset = usbmisc_imx6_hsic_get_reg_offset(data); if (offset < 0) { spin_unlock_irqrestore(&usbmisc->lock, flags); return offset; } val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); val |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON; if (on) val |= MX6_BM_HSIC_CLK_ON; else val &= ~MX6_BM_HSIC_CLK_ON; writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); spin_unlock_irqrestore(&usbmisc->lock, flags); return 0; } static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data) { void __iomem *reg = NULL; unsigned long flags; struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); u32 val; usbmisc_imx6q_init(data); if (data->index == 0 || data->index == 1) { reg = usbmisc->base + MX6_USB_OTG1_PHY_CTRL + data->index * 4; spin_lock_irqsave(&usbmisc->lock, flags); /* Set vbus wakeup source as bvalid */ val = readl(reg); writel(val | MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID, reg); /* * Disable dp/dm wakeup in device mode when vbus is * not there. */ val = readl(usbmisc->base + data->index * 4); writel(val & ~MX6SX_BM_DPDM_WAKEUP_EN, usbmisc->base + data->index * 4); spin_unlock_irqrestore(&usbmisc->lock, flags); } /* For HSIC controller */ if (data->hsic) { val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET); val |= MX6SX_BM_HSIC_AUTO_RESUME; writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET); } return 0; } static int usbmisc_vf610_init(struct imx_usbmisc_data *data) { struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); u32 reg; /* * Vybrid only has one misc register set, but in two different * areas. These is reflected in two instances of this driver. */ if (data->index >= 1) return -EINVAL; if (data->disable_oc) { reg = readl(usbmisc->base); writel(reg | VF610_OVER_CUR_DIS, usbmisc->base); } return 0; } static int usbmisc_imx7d_set_wakeup (struct imx_usbmisc_data *data, bool enabled) { struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); unsigned long flags; u32 val; u32 wakeup_setting = (MX6_BM_WAKEUP_ENABLE | MX6_BM_VBUS_WAKEUP | MX6_BM_ID_WAKEUP); spin_lock_irqsave(&usbmisc->lock, flags); val = readl(usbmisc->base); if (enabled) { writel(val | wakeup_setting, usbmisc->base); } else { if (val & MX6_BM_WAKEUP_INTR) dev_dbg(data->dev, "wakeup int\n"); writel(val & ~wakeup_setting, usbmisc->base); } spin_unlock_irqrestore(&usbmisc->lock, flags); return 0; } static int usbmisc_imx7d_init(struct imx_usbmisc_data *data) { struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); unsigned long flags; u32 reg; if (data->index >= 1) return -EINVAL; spin_lock_irqsave(&usbmisc->lock, flags); reg = readl(usbmisc->base); if (data->disable_oc) { reg |= MX6_BM_OVER_CUR_DIS; } else { reg &= ~MX6_BM_OVER_CUR_DIS; /* * If the polarity is not configured keep it as setup by the * bootloader. */ if (data->oc_pol_configured && data->oc_pol_active_low) reg |= MX6_BM_OVER_CUR_POLARITY; else if (data->oc_pol_configured) reg &= ~MX6_BM_OVER_CUR_POLARITY; } /* If the polarity is not set keep it as setup by the bootlader */ if (data->pwr_pol == 1) reg |= MX6_BM_PWR_POLARITY; writel(reg, usbmisc->base); reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2); reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK; writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID, usbmisc->base + MX7D_USBNC_USB_CTRL2); spin_unlock_irqrestore(&usbmisc->lock, flags); usbmisc_imx7d_set_wakeup(data, false); return 0; } static const struct usbmisc_ops imx25_usbmisc_ops = { .init = usbmisc_imx25_init, .post = usbmisc_imx25_post, }; static const struct usbmisc_ops imx27_usbmisc_ops = { .init = usbmisc_imx27_init, }; static const struct usbmisc_ops imx51_usbmisc_ops = { .init = usbmisc_imx53_init, }; static const struct usbmisc_ops imx53_usbmisc_ops = { .init = usbmisc_imx53_init, }; static const struct usbmisc_ops imx6q_usbmisc_ops = { .set_wakeup = usbmisc_imx6q_set_wakeup, .init = usbmisc_imx6q_init, .hsic_set_connect = usbmisc_imx6_hsic_set_connect, .hsic_set_clk = usbmisc_imx6_hsic_set_clk, }; static const struct usbmisc_ops vf610_usbmisc_ops = { .init = usbmisc_vf610_init, }; static const struct usbmisc_ops imx6sx_usbmisc_ops = { .set_wakeup = usbmisc_imx6q_set_wakeup, .init = usbmisc_imx6sx_init, .hsic_set_connect = usbmisc_imx6_hsic_set_connect, .hsic_set_clk = usbmisc_imx6_hsic_set_clk, }; static const struct usbmisc_ops imx7d_usbmisc_ops = { .init = usbmisc_imx7d_init, .set_wakeup = usbmisc_imx7d_set_wakeup, }; static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data) { struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); return usbmisc->ops == &imx53_usbmisc_ops; } int imx_usbmisc_init(struct imx_usbmisc_data *data) { struct imx_usbmisc *usbmisc; if (!data) return 0; usbmisc = dev_get_drvdata(data->dev); if (!usbmisc->ops->init) return 0; return usbmisc->ops->init(data); } EXPORT_SYMBOL_GPL(imx_usbmisc_init); int imx_usbmisc_init_post(struct imx_usbmisc_data *data) { struct imx_usbmisc *usbmisc; if (!data) return 0; usbmisc = dev_get_drvdata(data->dev); if (!usbmisc->ops->post) return 0; return usbmisc->ops->post(data); } EXPORT_SYMBOL_GPL(imx_usbmisc_init_post); int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled) { struct imx_usbmisc *usbmisc; if (!data) return 0; usbmisc = dev_get_drvdata(data->dev); if (!usbmisc->ops->set_wakeup) return 0; return usbmisc->ops->set_wakeup(data, enabled); } EXPORT_SYMBOL_GPL(imx_usbmisc_set_wakeup); int imx_usbmisc_hsic_set_connect(struct imx_usbmisc_data *data) { struct imx_usbmisc *usbmisc; if (!data) return 0; usbmisc = dev_get_drvdata(data->dev); if (!usbmisc->ops->hsic_set_connect || !data->hsic) return 0; return usbmisc->ops->hsic_set_connect(data); } EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_connect); int imx_usbmisc_hsic_set_clk(struct imx_usbmisc_data *data, bool on) { struct imx_usbmisc *usbmisc; if (!data) return 0; usbmisc = dev_get_drvdata(data->dev); if (!usbmisc->ops->hsic_set_clk || !data->hsic) return 0; return usbmisc->ops->hsic_set_clk(data, on); } EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_clk); static const struct of_device_id usbmisc_imx_dt_ids[] = { { .compatible = "fsl,imx25-usbmisc", .data = &imx25_usbmisc_ops, }, { .compatible = "fsl,imx35-usbmisc", .data = &imx25_usbmisc_ops, }, { .compatible = "fsl,imx27-usbmisc", .data = &imx27_usbmisc_ops, }, { .compatible = "fsl,imx51-usbmisc", .data = &imx51_usbmisc_ops, }, { .compatible = "fsl,imx53-usbmisc", .data = &imx53_usbmisc_ops, }, { .compatible = "fsl,imx6q-usbmisc", .data = &imx6q_usbmisc_ops, }, { .compatible = "fsl,vf610-usbmisc", .data = &vf610_usbmisc_ops, }, { .compatible = "fsl,imx6sx-usbmisc", .data = &imx6sx_usbmisc_ops, }, { .compatible = "fsl,imx6ul-usbmisc", .data = &imx6sx_usbmisc_ops, }, { .compatible = "fsl,imx7d-usbmisc", .data = &imx7d_usbmisc_ops, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids); static int usbmisc_imx_probe(struct platform_device *pdev) { struct resource *res; struct imx_usbmisc *data; const struct of_device_id *of_id; of_id = of_match_device(usbmisc_imx_dt_ids, &pdev->dev); if (!of_id) return -ENODEV; data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; spin_lock_init(&data->lock); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); data->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(data->base)) return PTR_ERR(data->base); data->ops = (const struct usbmisc_ops *)of_id->data; platform_set_drvdata(pdev, data); return 0; } static int usbmisc_imx_remove(struct platform_device *pdev) { return 0; } static struct platform_driver usbmisc_imx_driver = { .probe = usbmisc_imx_probe, .remove = usbmisc_imx_remove, .driver = { .name = "usbmisc_imx", .of_match_table = usbmisc_imx_dt_ids, }, }; module_platform_driver(usbmisc_imx_driver); MODULE_ALIAS("platform:usbmisc-imx"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("driver for imx usb non-core registers"); MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1