Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Takahiro Hirofuchi | 3199 | 48.85% | 1 | 1.47% |
Yuyang Du | 1795 | 27.41% | 8 | 11.76% |
Nobuo Iwata | 493 | 7.53% | 1 | 1.47% |
Max Vozeler | 220 | 3.36% | 5 | 7.35% |
Shuah Khan | 170 | 2.60% | 5 | 7.35% |
Andrew Goodbody | 160 | 2.44% | 1 | 1.47% |
Márton Németh | 93 | 1.42% | 3 | 4.41% |
Matt Mooney | 81 | 1.24% | 7 | 10.29% |
Bernard Blackham | 79 | 1.21% | 2 | 2.94% |
Brian G. Merrell | 56 | 0.86% | 1 | 1.47% |
Johan Hovold | 46 | 0.70% | 1 | 1.47% |
Bart Westgeest | 30 | 0.46% | 3 | 4.41% |
Navin Patidar | 28 | 0.43% | 2 | 2.94% |
Arnd Bergmann | 13 | 0.20% | 1 | 1.47% |
Greg Kroah-Hartman | 12 | 0.18% | 3 | 4.41% |
John Youn | 8 | 0.12% | 1 | 1.47% |
Alan Stern | 8 | 0.12% | 2 | 2.94% |
Igor Kotrasinski | 7 | 0.11% | 2 | 2.94% |
Keerthimai Janarthanan | 6 | 0.09% | 1 | 1.47% |
Joe Perches | 6 | 0.09% | 1 | 1.47% |
Suwan Kim | 5 | 0.08% | 1 | 1.47% |
Teodora Baluta | 5 | 0.08% | 1 | 1.47% |
Huawei (Harvey) Yang | 5 | 0.08% | 1 | 1.47% |
Kay Sievers | 4 | 0.06% | 1 | 1.47% |
Sergei Shtylyov | 4 | 0.06% | 2 | 2.94% |
Shan Wei | 2 | 0.03% | 1 | 1.47% |
Al Viro | 2 | 0.03% | 1 | 1.47% |
Oleg Nesterov | 2 | 0.03% | 1 | 1.47% |
Sage Sharp | 2 | 0.03% | 1 | 1.47% |
Tejun Heo | 2 | 0.03% | 1 | 1.47% |
Bhumika Goyal | 1 | 0.02% | 1 | 1.47% |
Justin P. Mattock | 1 | 0.02% | 1 | 1.47% |
Vaishali Thakkar | 1 | 0.02% | 1 | 1.47% |
Alexey Tulia | 1 | 0.02% | 1 | 1.47% |
Gustavo A. R. Silva | 1 | 0.02% | 1 | 1.47% |
Robert P. J. Day | 1 | 0.02% | 1 | 1.47% |
Total | 6549 | 68 |
// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2003-2008 Takahiro Hirofuchi * Copyright (C) 2015-2016 Nobuo Iwata */ #include <linux/init.h> #include <linux/file.h> #include <linux/kernel.h> #include <linux/kthread.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/slab.h> #include "usbip_common.h" #include "vhci.h" #define DRIVER_AUTHOR "Takahiro Hirofuchi" #define DRIVER_DESC "USB/IP 'Virtual' Host Controller (VHCI) Driver" /* * TODO * - update root hub emulation * - move the emulation code to userland ? * porting to other operating systems * minimize kernel code * - add suspend/resume code * - clean up everything */ /* See usb gadget dummy hcd */ static int vhci_hub_status(struct usb_hcd *hcd, char *buff); static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buff, u16 wLength); static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags); static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status); static int vhci_start(struct usb_hcd *vhci_hcd); static void vhci_stop(struct usb_hcd *hcd); static int vhci_get_frame_number(struct usb_hcd *hcd); static const char driver_name[] = "vhci_hcd"; static const char driver_desc[] = "USB/IP Virtual Host Controller"; int vhci_num_controllers = VHCI_NR_HCS; struct vhci *vhcis; static const char * const bit_desc[] = { "CONNECTION", /*0*/ "ENABLE", /*1*/ "SUSPEND", /*2*/ "OVER_CURRENT", /*3*/ "RESET", /*4*/ "L1", /*5*/ "R6", /*6*/ "R7", /*7*/ "POWER", /*8*/ "LOWSPEED", /*9*/ "HIGHSPEED", /*10*/ "PORT_TEST", /*11*/ "INDICATOR", /*12*/ "R13", /*13*/ "R14", /*14*/ "R15", /*15*/ "C_CONNECTION", /*16*/ "C_ENABLE", /*17*/ "C_SUSPEND", /*18*/ "C_OVER_CURRENT", /*19*/ "C_RESET", /*20*/ "C_L1", /*21*/ "R22", /*22*/ "R23", /*23*/ "R24", /*24*/ "R25", /*25*/ "R26", /*26*/ "R27", /*27*/ "R28", /*28*/ "R29", /*29*/ "R30", /*30*/ "R31", /*31*/ }; static const char * const bit_desc_ss[] = { "CONNECTION", /*0*/ "ENABLE", /*1*/ "SUSPEND", /*2*/ "OVER_CURRENT", /*3*/ "RESET", /*4*/ "L1", /*5*/ "R6", /*6*/ "R7", /*7*/ "R8", /*8*/ "POWER", /*9*/ "HIGHSPEED", /*10*/ "PORT_TEST", /*11*/ "INDICATOR", /*12*/ "R13", /*13*/ "R14", /*14*/ "R15", /*15*/ "C_CONNECTION", /*16*/ "C_ENABLE", /*17*/ "C_SUSPEND", /*18*/ "C_OVER_CURRENT", /*19*/ "C_RESET", /*20*/ "C_BH_RESET", /*21*/ "C_LINK_STATE", /*22*/ "C_CONFIG_ERROR", /*23*/ "R24", /*24*/ "R25", /*25*/ "R26", /*26*/ "R27", /*27*/ "R28", /*28*/ "R29", /*29*/ "R30", /*30*/ "R31", /*31*/ }; static void dump_port_status_diff(u32 prev_status, u32 new_status, bool usb3) { int i = 0; u32 bit = 1; const char * const *desc = bit_desc; if (usb3) desc = bit_desc_ss; pr_debug("status prev -> new: %08x -> %08x\n", prev_status, new_status); while (bit) { u32 prev = prev_status & bit; u32 new = new_status & bit; char change; if (!prev && new) change = '+'; else if (prev && !new) change = '-'; else change = ' '; if (prev || new) { pr_debug(" %c%s\n", change, desc[i]); if (bit == 1) /* USB_PORT_STAT_CONNECTION */ pr_debug(" %c%s\n", change, "USB_PORT_STAT_SPEED_5GBPS"); } bit <<= 1; i++; } pr_debug("\n"); } void rh_port_connect(struct vhci_device *vdev, enum usb_device_speed speed) { struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev); struct vhci *vhci = vhci_hcd->vhci; int rhport = vdev->rhport; u32 status; unsigned long flags; usbip_dbg_vhci_rh("rh_port_connect %d\n", rhport); spin_lock_irqsave(&vhci->lock, flags); status = vhci_hcd->port_status[rhport]; status |= USB_PORT_STAT_CONNECTION | (1 << USB_PORT_FEAT_C_CONNECTION); switch (speed) { case USB_SPEED_HIGH: status |= USB_PORT_STAT_HIGH_SPEED; break; case USB_SPEED_LOW: status |= USB_PORT_STAT_LOW_SPEED; break; default: break; } vhci_hcd->port_status[rhport] = status; spin_unlock_irqrestore(&vhci->lock, flags); usb_hcd_poll_rh_status(vhci_hcd_to_hcd(vhci_hcd)); } static void rh_port_disconnect(struct vhci_device *vdev) { struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev); struct vhci *vhci = vhci_hcd->vhci; int rhport = vdev->rhport; u32 status; unsigned long flags; usbip_dbg_vhci_rh("rh_port_disconnect %d\n", rhport); spin_lock_irqsave(&vhci->lock, flags); status = vhci_hcd->port_status[rhport]; status &= ~USB_PORT_STAT_CONNECTION; status |= (1 << USB_PORT_FEAT_C_CONNECTION); vhci_hcd->port_status[rhport] = status; spin_unlock_irqrestore(&vhci->lock, flags); usb_hcd_poll_rh_status(vhci_hcd_to_hcd(vhci_hcd)); } #define PORT_C_MASK \ ((USB_PORT_STAT_C_CONNECTION \ | USB_PORT_STAT_C_ENABLE \ | USB_PORT_STAT_C_SUSPEND \ | USB_PORT_STAT_C_OVERCURRENT \ | USB_PORT_STAT_C_RESET) << 16) /* * Returns 0 if the status hasn't changed, or the number of bytes in buf. * Ports are 0-indexed from the HCD point of view, * and 1-indexed from the USB core pointer of view. * * @buf: a bitmap to show which port status has been changed. * bit 0: reserved * bit 1: the status of port 0 has been changed. * bit 2: the status of port 1 has been changed. * ... */ static int vhci_hub_status(struct usb_hcd *hcd, char *buf) { struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd); struct vhci *vhci = vhci_hcd->vhci; int retval = DIV_ROUND_UP(VHCI_HC_PORTS + 1, 8); int rhport; int changed = 0; unsigned long flags; memset(buf, 0, retval); spin_lock_irqsave(&vhci->lock, flags); if (!HCD_HW_ACCESSIBLE(hcd)) { usbip_dbg_vhci_rh("hw accessible flag not on?\n"); goto done; } /* check pseudo status register for each port */ for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { if ((vhci_hcd->port_status[rhport] & PORT_C_MASK)) { /* The status of a port has been changed, */ usbip_dbg_vhci_rh("port %d status changed\n", rhport); buf[(rhport + 1) / 8] |= 1 << (rhport + 1) % 8; changed = 1; } } if ((hcd->state == HC_STATE_SUSPENDED) && (changed == 1)) usb_hcd_resume_root_hub(hcd); done: spin_unlock_irqrestore(&vhci->lock, flags); return changed ? retval : 0; } /* usb 3.0 root hub device descriptor */ static struct { struct usb_bos_descriptor bos; struct usb_ss_cap_descriptor ss_cap; } __packed usb3_bos_desc = { .bos = { .bLength = USB_DT_BOS_SIZE, .bDescriptorType = USB_DT_BOS, .wTotalLength = cpu_to_le16(sizeof(usb3_bos_desc)), .bNumDeviceCaps = 1, }, .ss_cap = { .bLength = USB_DT_USB_SS_CAP_SIZE, .bDescriptorType = USB_DT_DEVICE_CAPABILITY, .bDevCapabilityType = USB_SS_CAP_TYPE, .wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION), .bFunctionalitySupport = ilog2(USB_5GBPS_OPERATION), }, }; static inline void ss_hub_descriptor(struct usb_hub_descriptor *desc) { memset(desc, 0, sizeof *desc); desc->bDescriptorType = USB_DT_SS_HUB; desc->bDescLength = 12; desc->wHubCharacteristics = cpu_to_le16( HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM); desc->bNbrPorts = VHCI_HC_PORTS; desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/ desc->u.ss.DeviceRemovable = 0xffff; } static inline void hub_descriptor(struct usb_hub_descriptor *desc) { int width; memset(desc, 0, sizeof(*desc)); desc->bDescriptorType = USB_DT_HUB; desc->wHubCharacteristics = cpu_to_le16( HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM); desc->bNbrPorts = VHCI_HC_PORTS; BUILD_BUG_ON(VHCI_HC_PORTS > USB_MAXCHILDREN); width = desc->bNbrPorts / 8 + 1; desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * width; memset(&desc->u.hs.DeviceRemovable[0], 0, width); memset(&desc->u.hs.DeviceRemovable[width], 0xff, width); } static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { struct vhci_hcd *vhci_hcd; struct vhci *vhci; int retval = 0; int rhport = -1; unsigned long flags; bool invalid_rhport = false; u32 prev_port_status[VHCI_HC_PORTS]; if (!HCD_HW_ACCESSIBLE(hcd)) return -ETIMEDOUT; /* * NOTE: * wIndex (bits 0-7) shows the port number and begins from 1? */ wIndex = ((__u8)(wIndex & 0x00ff)); usbip_dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue, wIndex); /* * wIndex can be 0 for some request types (typeReq). rhport is * in valid range when wIndex >= 1 and < VHCI_HC_PORTS. * * Reference port_status[] only with valid rhport when * invalid_rhport is false. */ if (wIndex < 1 || wIndex > VHCI_HC_PORTS) { invalid_rhport = true; if (wIndex > VHCI_HC_PORTS) pr_err("invalid port number %d\n", wIndex); } else rhport = wIndex - 1; vhci_hcd = hcd_to_vhci_hcd(hcd); vhci = vhci_hcd->vhci; spin_lock_irqsave(&vhci->lock, flags); /* store old status and compare now and old later */ if (usbip_dbg_flag_vhci_rh) { if (!invalid_rhport) memcpy(prev_port_status, vhci_hcd->port_status, sizeof(prev_port_status)); } switch (typeReq) { case ClearHubFeature: usbip_dbg_vhci_rh(" ClearHubFeature\n"); break; case ClearPortFeature: if (invalid_rhport) { pr_err("invalid port number %d\n", wIndex); goto error; } switch (wValue) { case USB_PORT_FEAT_SUSPEND: if (hcd->speed == HCD_USB3) { pr_err(" ClearPortFeature: USB_PORT_FEAT_SUSPEND req not " "supported for USB 3.0 roothub\n"); goto error; } usbip_dbg_vhci_rh( " ClearPortFeature: USB_PORT_FEAT_SUSPEND\n"); if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_SUSPEND) { /* 20msec signaling */ vhci_hcd->resuming = 1; vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(20); } break; case USB_PORT_FEAT_POWER: usbip_dbg_vhci_rh( " ClearPortFeature: USB_PORT_FEAT_POWER\n"); if (hcd->speed == HCD_USB3) vhci_hcd->port_status[rhport] &= ~USB_SS_PORT_STAT_POWER; else vhci_hcd->port_status[rhport] &= ~USB_PORT_STAT_POWER; break; default: usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n", wValue); vhci_hcd->port_status[rhport] &= ~(1 << wValue); break; } break; case GetHubDescriptor: usbip_dbg_vhci_rh(" GetHubDescriptor\n"); if (hcd->speed == HCD_USB3 && (wLength < USB_DT_SS_HUB_SIZE || wValue != (USB_DT_SS_HUB << 8))) { pr_err("Wrong hub descriptor type for USB 3.0 roothub.\n"); goto error; } if (hcd->speed == HCD_USB3) ss_hub_descriptor((struct usb_hub_descriptor *) buf); else hub_descriptor((struct usb_hub_descriptor *) buf); break; case DeviceRequest | USB_REQ_GET_DESCRIPTOR: if (hcd->speed != HCD_USB3) goto error; if ((wValue >> 8) != USB_DT_BOS) goto error; memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc)); retval = sizeof(usb3_bos_desc); break; case GetHubStatus: usbip_dbg_vhci_rh(" GetHubStatus\n"); *(__le32 *) buf = cpu_to_le32(0); break; case GetPortStatus: usbip_dbg_vhci_rh(" GetPortStatus port %x\n", wIndex); if (invalid_rhport) { pr_err("invalid port number %d\n", wIndex); retval = -EPIPE; goto error; } /* we do not care about resume. */ /* whoever resets or resumes must GetPortStatus to * complete it!! */ if (vhci_hcd->resuming && time_after(jiffies, vhci_hcd->re_timeout)) { vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_SUSPEND); vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_SUSPEND); vhci_hcd->resuming = 0; vhci_hcd->re_timeout = 0; } if ((vhci_hcd->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) != 0 && time_after(jiffies, vhci_hcd->re_timeout)) { vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_RESET); vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_RESET); vhci_hcd->re_timeout = 0; if (vhci_hcd->vdev[rhport].ud.status == VDEV_ST_NOTASSIGNED) { usbip_dbg_vhci_rh( " enable rhport %d (status %u)\n", rhport, vhci_hcd->vdev[rhport].ud.status); vhci_hcd->port_status[rhport] |= USB_PORT_STAT_ENABLE; } if (hcd->speed < HCD_USB3) { switch (vhci_hcd->vdev[rhport].speed) { case USB_SPEED_HIGH: vhci_hcd->port_status[rhport] |= USB_PORT_STAT_HIGH_SPEED; break; case USB_SPEED_LOW: vhci_hcd->port_status[rhport] |= USB_PORT_STAT_LOW_SPEED; break; default: pr_err("vhci_device speed not set\n"); break; } } } ((__le16 *) buf)[0] = cpu_to_le16(vhci_hcd->port_status[rhport]); ((__le16 *) buf)[1] = cpu_to_le16(vhci_hcd->port_status[rhport] >> 16); usbip_dbg_vhci_rh(" GetPortStatus bye %x %x\n", ((u16 *)buf)[0], ((u16 *)buf)[1]); break; case SetHubFeature: usbip_dbg_vhci_rh(" SetHubFeature\n"); retval = -EPIPE; break; case SetPortFeature: switch (wValue) { case USB_PORT_FEAT_LINK_STATE: usbip_dbg_vhci_rh( " SetPortFeature: USB_PORT_FEAT_LINK_STATE\n"); if (hcd->speed != HCD_USB3) { pr_err("USB_PORT_FEAT_LINK_STATE req not " "supported for USB 2.0 roothub\n"); goto error; } /* * Since this is dummy we don't have an actual link so * there is nothing to do for the SET_LINK_STATE cmd */ break; case USB_PORT_FEAT_U1_TIMEOUT: usbip_dbg_vhci_rh( " SetPortFeature: USB_PORT_FEAT_U1_TIMEOUT\n"); /* Fall through */ case USB_PORT_FEAT_U2_TIMEOUT: usbip_dbg_vhci_rh( " SetPortFeature: USB_PORT_FEAT_U2_TIMEOUT\n"); /* TODO: add suspend/resume support! */ if (hcd->speed != HCD_USB3) { pr_err("USB_PORT_FEAT_U1/2_TIMEOUT req not " "supported for USB 2.0 roothub\n"); goto error; } break; case USB_PORT_FEAT_SUSPEND: usbip_dbg_vhci_rh( " SetPortFeature: USB_PORT_FEAT_SUSPEND\n"); /* Applicable only for USB2.0 hub */ if (hcd->speed == HCD_USB3) { pr_err("USB_PORT_FEAT_SUSPEND req not " "supported for USB 3.0 roothub\n"); goto error; } if (invalid_rhport) { pr_err("invalid port number %d\n", wIndex); goto error; } vhci_hcd->port_status[rhport] |= USB_PORT_STAT_SUSPEND; break; case USB_PORT_FEAT_POWER: usbip_dbg_vhci_rh( " SetPortFeature: USB_PORT_FEAT_POWER\n"); if (invalid_rhport) { pr_err("invalid port number %d\n", wIndex); goto error; } if (hcd->speed == HCD_USB3) vhci_hcd->port_status[rhport] |= USB_SS_PORT_STAT_POWER; else vhci_hcd->port_status[rhport] |= USB_PORT_STAT_POWER; break; case USB_PORT_FEAT_BH_PORT_RESET: usbip_dbg_vhci_rh( " SetPortFeature: USB_PORT_FEAT_BH_PORT_RESET\n"); if (invalid_rhport) { pr_err("invalid port number %d\n", wIndex); goto error; } /* Applicable only for USB3.0 hub */ if (hcd->speed != HCD_USB3) { pr_err("USB_PORT_FEAT_BH_PORT_RESET req not " "supported for USB 2.0 roothub\n"); goto error; } /* FALLS THROUGH */ case USB_PORT_FEAT_RESET: usbip_dbg_vhci_rh( " SetPortFeature: USB_PORT_FEAT_RESET\n"); if (invalid_rhport) { pr_err("invalid port number %d\n", wIndex); goto error; } /* if it's already enabled, disable */ if (hcd->speed == HCD_USB3) { vhci_hcd->port_status[rhport] = 0; vhci_hcd->port_status[rhport] = (USB_SS_PORT_STAT_POWER | USB_PORT_STAT_CONNECTION | USB_PORT_STAT_RESET); } else if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_ENABLE) { vhci_hcd->port_status[rhport] &= ~(USB_PORT_STAT_ENABLE | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED); } /* 50msec reset signaling */ vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(50); /* FALLS THROUGH */ default: usbip_dbg_vhci_rh(" SetPortFeature: default %d\n", wValue); if (invalid_rhport) { pr_err("invalid port number %d\n", wIndex); goto error; } if (hcd->speed == HCD_USB3) { if ((vhci_hcd->port_status[rhport] & USB_SS_PORT_STAT_POWER) != 0) { vhci_hcd->port_status[rhport] |= (1 << wValue); } } else if ((vhci_hcd->port_status[rhport] & USB_PORT_STAT_POWER) != 0) { vhci_hcd->port_status[rhport] |= (1 << wValue); } } break; case GetPortErrorCount: usbip_dbg_vhci_rh(" GetPortErrorCount\n"); if (hcd->speed != HCD_USB3) { pr_err("GetPortErrorCount req not " "supported for USB 2.0 roothub\n"); goto error; } /* We'll always return 0 since this is a dummy hub */ *(__le32 *) buf = cpu_to_le32(0); break; case SetHubDepth: usbip_dbg_vhci_rh(" SetHubDepth\n"); if (hcd->speed != HCD_USB3) { pr_err("SetHubDepth req not supported for " "USB 2.0 roothub\n"); goto error; } break; default: pr_err("default hub control req: %04x v%04x i%04x l%d\n", typeReq, wValue, wIndex, wLength); error: /* "protocol stall" on error */ retval = -EPIPE; } if (usbip_dbg_flag_vhci_rh) { pr_debug("port %d\n", rhport); /* Only dump valid port status */ if (!invalid_rhport) { dump_port_status_diff(prev_port_status[rhport], vhci_hcd->port_status[rhport], hcd->speed == HCD_USB3); } } usbip_dbg_vhci_rh(" bye\n"); spin_unlock_irqrestore(&vhci->lock, flags); if (!invalid_rhport && (vhci_hcd->port_status[rhport] & PORT_C_MASK) != 0) { usb_hcd_poll_rh_status(hcd); } return retval; } static void vhci_tx_urb(struct urb *urb, struct vhci_device *vdev) { struct vhci_priv *priv; struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev); unsigned long flags; priv = kzalloc(sizeof(struct vhci_priv), GFP_ATOMIC); if (!priv) { usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC); return; } spin_lock_irqsave(&vdev->priv_lock, flags); priv->seqnum = atomic_inc_return(&vhci_hcd->seqnum); if (priv->seqnum == 0xffff) dev_info(&urb->dev->dev, "seqnum max\n"); priv->vdev = vdev; priv->urb = urb; urb->hcpriv = (void *) priv; list_add_tail(&priv->list, &vdev->priv_tx); wake_up(&vdev->waitq_tx); spin_unlock_irqrestore(&vdev->priv_lock, flags); } static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) { struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd); struct vhci *vhci = vhci_hcd->vhci; struct device *dev = &urb->dev->dev; u8 portnum = urb->dev->portnum; int ret = 0; struct vhci_device *vdev; unsigned long flags; if (portnum > VHCI_HC_PORTS) { pr_err("invalid port number %d\n", portnum); return -ENODEV; } vdev = &vhci_hcd->vdev[portnum-1]; if (!urb->transfer_buffer && urb->transfer_buffer_length) { dev_dbg(dev, "Null URB transfer buffer\n"); return -EINVAL; } spin_lock_irqsave(&vhci->lock, flags); if (urb->status != -EINPROGRESS) { dev_err(dev, "URB already unlinked!, status %d\n", urb->status); spin_unlock_irqrestore(&vhci->lock, flags); return urb->status; } /* refuse enqueue for dead connection */ spin_lock(&vdev->ud.lock); if (vdev->ud.status == VDEV_ST_NULL || vdev->ud.status == VDEV_ST_ERROR) { dev_err(dev, "enqueue for inactive port %d\n", vdev->rhport); spin_unlock(&vdev->ud.lock); spin_unlock_irqrestore(&vhci->lock, flags); return -ENODEV; } spin_unlock(&vdev->ud.lock); ret = usb_hcd_link_urb_to_ep(hcd, urb); if (ret) goto no_need_unlink; /* * The enumeration process is as follows; * * 1. Get_Descriptor request to DevAddrs(0) EndPoint(0) * to get max packet length of default pipe * * 2. Set_Address request to DevAddr(0) EndPoint(0) * */ if (usb_pipedevice(urb->pipe) == 0) { __u8 type = usb_pipetype(urb->pipe); struct usb_ctrlrequest *ctrlreq = (struct usb_ctrlrequest *) urb->setup_packet; if (type != PIPE_CONTROL || !ctrlreq) { dev_err(dev, "invalid request to devnum 0\n"); ret = -EINVAL; goto no_need_xmit; } switch (ctrlreq->bRequest) { case USB_REQ_SET_ADDRESS: /* set_address may come when a device is reset */ dev_info(dev, "SetAddress Request (%d) to port %d\n", ctrlreq->wValue, vdev->rhport); usb_put_dev(vdev->udev); vdev->udev = usb_get_dev(urb->dev); spin_lock(&vdev->ud.lock); vdev->ud.status = VDEV_ST_USED; spin_unlock(&vdev->ud.lock); if (urb->status == -EINPROGRESS) { /* This request is successfully completed. */ /* If not -EINPROGRESS, possibly unlinked. */ urb->status = 0; } goto no_need_xmit; case USB_REQ_GET_DESCRIPTOR: if (ctrlreq->wValue == cpu_to_le16(USB_DT_DEVICE << 8)) usbip_dbg_vhci_hc( "Not yet?:Get_Descriptor to device 0 (get max pipe size)\n"); usb_put_dev(vdev->udev); vdev->udev = usb_get_dev(urb->dev); goto out; default: /* NOT REACHED */ dev_err(dev, "invalid request to devnum 0 bRequest %u, wValue %u\n", ctrlreq->bRequest, ctrlreq->wValue); ret = -EINVAL; goto no_need_xmit; } } out: vhci_tx_urb(urb, vdev); spin_unlock_irqrestore(&vhci->lock, flags); return 0; no_need_xmit: usb_hcd_unlink_urb_from_ep(hcd, urb); no_need_unlink: spin_unlock_irqrestore(&vhci->lock, flags); if (!ret) usb_hcd_giveback_urb(hcd, urb, urb->status); return ret; } /* * vhci_rx gives back the urb after receiving the reply of the urb. If an * unlink pdu is sent or not, vhci_rx receives a normal return pdu and gives * back its urb. For the driver unlinking the urb, the content of the urb is * not important, but the calling to its completion handler is important; the * completion of unlinking is notified by the completion handler. * * * CLIENT SIDE * * - When vhci_hcd receives RET_SUBMIT, * * - case 1a). the urb of the pdu is not unlinking. * - normal case * => just give back the urb * * - case 1b). the urb of the pdu is unlinking. * - usbip.ko will return a reply of the unlinking request. * => give back the urb now and go to case 2b). * * - When vhci_hcd receives RET_UNLINK, * * - case 2a). a submit request is still pending in vhci_hcd. * - urb was really pending in usbip.ko and urb_unlink_urb() was * completed there. * => free a pending submit request * => notify unlink completeness by giving back the urb * * - case 2b). a submit request is *not* pending in vhci_hcd. * - urb was already given back to the core driver. * => do not give back the urb * * * SERVER SIDE * * - When usbip receives CMD_UNLINK, * * - case 3a). the urb of the unlink request is now in submission. * => do usb_unlink_urb(). * => after the unlink is completed, send RET_UNLINK. * * - case 3b). the urb of the unlink request is not in submission. * - may be already completed or never be received * => send RET_UNLINK * */ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) { struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd); struct vhci *vhci = vhci_hcd->vhci; struct vhci_priv *priv; struct vhci_device *vdev; unsigned long flags; spin_lock_irqsave(&vhci->lock, flags); priv = urb->hcpriv; if (!priv) { /* URB was never linked! or will be soon given back by * vhci_rx. */ spin_unlock_irqrestore(&vhci->lock, flags); return -EIDRM; } { int ret = 0; ret = usb_hcd_check_unlink_urb(hcd, urb, status); if (ret) { spin_unlock_irqrestore(&vhci->lock, flags); return ret; } } /* send unlink request here? */ vdev = priv->vdev; if (!vdev->ud.tcp_socket) { /* tcp connection is closed */ spin_lock(&vdev->priv_lock); list_del(&priv->list); kfree(priv); urb->hcpriv = NULL; spin_unlock(&vdev->priv_lock); /* * If tcp connection is alive, we have sent CMD_UNLINK. * vhci_rx will receive RET_UNLINK and give back the URB. * Otherwise, we give back it here. */ usb_hcd_unlink_urb_from_ep(hcd, urb); spin_unlock_irqrestore(&vhci->lock, flags); usb_hcd_giveback_urb(hcd, urb, urb->status); spin_lock_irqsave(&vhci->lock, flags); } else { /* tcp connection is alive */ struct vhci_unlink *unlink; spin_lock(&vdev->priv_lock); /* setup CMD_UNLINK pdu */ unlink = kzalloc(sizeof(struct vhci_unlink), GFP_ATOMIC); if (!unlink) { spin_unlock(&vdev->priv_lock); spin_unlock_irqrestore(&vhci->lock, flags); usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC); return -ENOMEM; } unlink->seqnum = atomic_inc_return(&vhci_hcd->seqnum); if (unlink->seqnum == 0xffff) pr_info("seqnum max\n"); unlink->unlink_seqnum = priv->seqnum; /* send cmd_unlink and try to cancel the pending URB in the * peer */ list_add_tail(&unlink->list, &vdev->unlink_tx); wake_up(&vdev->waitq_tx); spin_unlock(&vdev->priv_lock); } spin_unlock_irqrestore(&vhci->lock, flags); usbip_dbg_vhci_hc("leave\n"); return 0; } static void vhci_device_unlink_cleanup(struct vhci_device *vdev) { struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev); struct usb_hcd *hcd = vhci_hcd_to_hcd(vhci_hcd); struct vhci *vhci = vhci_hcd->vhci; struct vhci_unlink *unlink, *tmp; unsigned long flags; spin_lock_irqsave(&vhci->lock, flags); spin_lock(&vdev->priv_lock); list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) { pr_info("unlink cleanup tx %lu\n", unlink->unlink_seqnum); list_del(&unlink->list); kfree(unlink); } while (!list_empty(&vdev->unlink_rx)) { struct urb *urb; unlink = list_first_entry(&vdev->unlink_rx, struct vhci_unlink, list); /* give back URB of unanswered unlink request */ pr_info("unlink cleanup rx %lu\n", unlink->unlink_seqnum); urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum); if (!urb) { pr_info("the urb (seqnum %lu) was already given back\n", unlink->unlink_seqnum); list_del(&unlink->list); kfree(unlink); continue; } urb->status = -ENODEV; usb_hcd_unlink_urb_from_ep(hcd, urb); list_del(&unlink->list); spin_unlock(&vdev->priv_lock); spin_unlock_irqrestore(&vhci->lock, flags); usb_hcd_giveback_urb(hcd, urb, urb->status); spin_lock_irqsave(&vhci->lock, flags); spin_lock(&vdev->priv_lock); kfree(unlink); } spin_unlock(&vdev->priv_lock); spin_unlock_irqrestore(&vhci->lock, flags); } /* * The important thing is that only one context begins cleanup. * This is why error handling and cleanup become simple. * We do not want to consider race condition as possible. */ static void vhci_shutdown_connection(struct usbip_device *ud) { struct vhci_device *vdev = container_of(ud, struct vhci_device, ud); /* need this? see stub_dev.c */ if (ud->tcp_socket) { pr_debug("shutdown tcp_socket %d\n", ud->sockfd); kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR); } /* kill threads related to this sdev */ if (vdev->ud.tcp_rx) { kthread_stop_put(vdev->ud.tcp_rx); vdev->ud.tcp_rx = NULL; } if (vdev->ud.tcp_tx) { kthread_stop_put(vdev->ud.tcp_tx); vdev->ud.tcp_tx = NULL; } pr_info("stop threads\n"); /* active connection is closed */ if (vdev->ud.tcp_socket) { sockfd_put(vdev->ud.tcp_socket); vdev->ud.tcp_socket = NULL; vdev->ud.sockfd = -1; } pr_info("release socket\n"); vhci_device_unlink_cleanup(vdev); /* * rh_port_disconnect() is a trigger of ... * usb_disable_device(): * disable all the endpoints for a USB device. * usb_disable_endpoint(): * disable endpoints. pending urbs are unlinked(dequeued). * * NOTE: After calling rh_port_disconnect(), the USB device drivers of a * detached device should release used urbs in a cleanup function (i.e. * xxx_disconnect()). Therefore, vhci_hcd does not need to release * pushed urbs and their private data in this function. * * NOTE: vhci_dequeue() must be considered carefully. When shutting down * a connection, vhci_shutdown_connection() expects vhci_dequeue() * gives back pushed urbs and frees their private data by request of * the cleanup function of a USB driver. When unlinking a urb with an * active connection, vhci_dequeue() does not give back the urb which * is actually given back by vhci_rx after receiving its return pdu. * */ rh_port_disconnect(vdev); pr_info("disconnect device\n"); } static void vhci_device_reset(struct usbip_device *ud) { struct vhci_device *vdev = container_of(ud, struct vhci_device, ud); unsigned long flags; spin_lock_irqsave(&ud->lock, flags); vdev->speed = 0; vdev->devid = 0; usb_put_dev(vdev->udev); vdev->udev = NULL; if (ud->tcp_socket) { sockfd_put(ud->tcp_socket); ud->tcp_socket = NULL; ud->sockfd = -1; } ud->status = VDEV_ST_NULL; spin_unlock_irqrestore(&ud->lock, flags); } static void vhci_device_unusable(struct usbip_device *ud) { unsigned long flags; spin_lock_irqsave(&ud->lock, flags); ud->status = VDEV_ST_ERROR; spin_unlock_irqrestore(&ud->lock, flags); } static void vhci_device_init(struct vhci_device *vdev) { memset(vdev, 0, sizeof(struct vhci_device)); vdev->ud.side = USBIP_VHCI; vdev->ud.status = VDEV_ST_NULL; spin_lock_init(&vdev->ud.lock); INIT_LIST_HEAD(&vdev->priv_rx); INIT_LIST_HEAD(&vdev->priv_tx); INIT_LIST_HEAD(&vdev->unlink_tx); INIT_LIST_HEAD(&vdev->unlink_rx); spin_lock_init(&vdev->priv_lock); init_waitqueue_head(&vdev->waitq_tx); vdev->ud.eh_ops.shutdown = vhci_shutdown_connection; vdev->ud.eh_ops.reset = vhci_device_reset; vdev->ud.eh_ops.unusable = vhci_device_unusable; usbip_start_eh(&vdev->ud); } static int hcd_name_to_id(const char *name) { char *c; long val; int ret; c = strchr(name, '.'); if (c == NULL) return 0; ret = kstrtol(c+1, 10, &val); if (ret < 0) return ret; return val; } static int vhci_setup(struct usb_hcd *hcd) { struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller)); if (usb_hcd_is_primary_hcd(hcd)) { vhci->vhci_hcd_hs = hcd_to_vhci_hcd(hcd); vhci->vhci_hcd_hs->vhci = vhci; /* * Mark the first roothub as being USB 2.0. * The USB 3.0 roothub will be registered later by * vhci_hcd_probe() */ hcd->speed = HCD_USB2; hcd->self.root_hub->speed = USB_SPEED_HIGH; } else { vhci->vhci_hcd_ss = hcd_to_vhci_hcd(hcd); vhci->vhci_hcd_ss->vhci = vhci; hcd->speed = HCD_USB3; hcd->self.root_hub->speed = USB_SPEED_SUPER; } return 0; } static int vhci_start(struct usb_hcd *hcd) { struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd); int id, rhport; int err; usbip_dbg_vhci_hc("enter vhci_start\n"); if (usb_hcd_is_primary_hcd(hcd)) spin_lock_init(&vhci_hcd->vhci->lock); /* initialize private data of usb_hcd */ for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { struct vhci_device *vdev = &vhci_hcd->vdev[rhport]; vhci_device_init(vdev); vdev->rhport = rhport; } atomic_set(&vhci_hcd->seqnum, 0); hcd->power_budget = 0; /* no limit */ hcd->uses_new_polling = 1; #ifdef CONFIG_USB_OTG hcd->self.otg_port = 1; #endif id = hcd_name_to_id(hcd_name(hcd)); if (id < 0) { pr_err("invalid vhci name %s\n", hcd_name(hcd)); return -EINVAL; } /* vhci_hcd is now ready to be controlled through sysfs */ if (id == 0 && usb_hcd_is_primary_hcd(hcd)) { err = vhci_init_attr_group(); if (err) { pr_err("init attr group\n"); return err; } err = sysfs_create_group(&hcd_dev(hcd)->kobj, &vhci_attr_group); if (err) { pr_err("create sysfs files\n"); vhci_finish_attr_group(); return err; } pr_info("created sysfs %s\n", hcd_name(hcd)); } return 0; } static void vhci_stop(struct usb_hcd *hcd) { struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd); int id, rhport; usbip_dbg_vhci_hc("stop VHCI controller\n"); /* 1. remove the userland interface of vhci_hcd */ id = hcd_name_to_id(hcd_name(hcd)); if (id == 0 && usb_hcd_is_primary_hcd(hcd)) { sysfs_remove_group(&hcd_dev(hcd)->kobj, &vhci_attr_group); vhci_finish_attr_group(); } /* 2. shutdown all the ports of vhci_hcd */ for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { struct vhci_device *vdev = &vhci_hcd->vdev[rhport]; usbip_event_add(&vdev->ud, VDEV_EVENT_REMOVED); usbip_stop_eh(&vdev->ud); } } static int vhci_get_frame_number(struct usb_hcd *hcd) { dev_err_ratelimited(&hcd->self.root_hub->dev, "Not yet implemented\n"); return 0; } #ifdef CONFIG_PM /* FIXME: suspend/resume */ static int vhci_bus_suspend(struct usb_hcd *hcd) { struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller)); unsigned long flags; dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); spin_lock_irqsave(&vhci->lock, flags); hcd->state = HC_STATE_SUSPENDED; spin_unlock_irqrestore(&vhci->lock, flags); return 0; } static int vhci_bus_resume(struct usb_hcd *hcd) { struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller)); int rc = 0; unsigned long flags; dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); spin_lock_irqsave(&vhci->lock, flags); if (!HCD_HW_ACCESSIBLE(hcd)) rc = -ESHUTDOWN; else hcd->state = HC_STATE_RUNNING; spin_unlock_irqrestore(&vhci->lock, flags); return rc; } #else #define vhci_bus_suspend NULL #define vhci_bus_resume NULL #endif /* Change a group of bulk endpoints to support multiple stream IDs */ static int vhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint **eps, unsigned int num_eps, unsigned int num_streams, gfp_t mem_flags) { dev_dbg(&hcd->self.root_hub->dev, "vhci_alloc_streams not implemented\n"); return 0; } /* Reverts a group of bulk endpoints back to not using stream IDs. */ static int vhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint **eps, unsigned int num_eps, gfp_t mem_flags) { dev_dbg(&hcd->self.root_hub->dev, "vhci_free_streams not implemented\n"); return 0; } static const struct hc_driver vhci_hc_driver = { .description = driver_name, .product_desc = driver_desc, .hcd_priv_size = sizeof(struct vhci_hcd), .flags = HCD_USB3 | HCD_SHARED, .reset = vhci_setup, .start = vhci_start, .stop = vhci_stop, .urb_enqueue = vhci_urb_enqueue, .urb_dequeue = vhci_urb_dequeue, .get_frame_number = vhci_get_frame_number, .hub_status_data = vhci_hub_status, .hub_control = vhci_hub_control, .bus_suspend = vhci_bus_suspend, .bus_resume = vhci_bus_resume, .alloc_streams = vhci_alloc_streams, .free_streams = vhci_free_streams, }; static int vhci_hcd_probe(struct platform_device *pdev) { struct vhci *vhci = *((void **)dev_get_platdata(&pdev->dev)); struct usb_hcd *hcd_hs; struct usb_hcd *hcd_ss; int ret; usbip_dbg_vhci_hc("name %s id %d\n", pdev->name, pdev->id); /* * Allocate and initialize hcd. * Our private data is also allocated automatically. */ hcd_hs = usb_create_hcd(&vhci_hc_driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd_hs) { pr_err("create primary hcd failed\n"); return -ENOMEM; } hcd_hs->has_tt = 1; /* * Finish generic HCD structure initialization and register. * Call the driver's reset() and start() routines. */ ret = usb_add_hcd(hcd_hs, 0, 0); if (ret != 0) { pr_err("usb_add_hcd hs failed %d\n", ret); goto put_usb2_hcd; } hcd_ss = usb_create_shared_hcd(&vhci_hc_driver, &pdev->dev, dev_name(&pdev->dev), hcd_hs); if (!hcd_ss) { ret = -ENOMEM; pr_err("create shared hcd failed\n"); goto remove_usb2_hcd; } ret = usb_add_hcd(hcd_ss, 0, 0); if (ret) { pr_err("usb_add_hcd ss failed %d\n", ret); goto put_usb3_hcd; } usbip_dbg_vhci_hc("bye\n"); return 0; put_usb3_hcd: usb_put_hcd(hcd_ss); remove_usb2_hcd: usb_remove_hcd(hcd_hs); put_usb2_hcd: usb_put_hcd(hcd_hs); vhci->vhci_hcd_hs = NULL; vhci->vhci_hcd_ss = NULL; return ret; } static int vhci_hcd_remove(struct platform_device *pdev) { struct vhci *vhci = *((void **)dev_get_platdata(&pdev->dev)); /* * Disconnects the root hub, * then reverses the effects of usb_add_hcd(), * invoking the HCD's stop() methods. */ usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss)); usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss)); usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs)); usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs)); vhci->vhci_hcd_hs = NULL; vhci->vhci_hcd_ss = NULL; return 0; } #ifdef CONFIG_PM /* what should happen for USB/IP under suspend/resume? */ static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state) { struct usb_hcd *hcd; struct vhci *vhci; int rhport; int connected = 0; int ret = 0; unsigned long flags; dev_dbg(&pdev->dev, "%s\n", __func__); hcd = platform_get_drvdata(pdev); if (!hcd) return 0; vhci = *((void **)dev_get_platdata(hcd->self.controller)); spin_lock_irqsave(&vhci->lock, flags); for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { if (vhci->vhci_hcd_hs->port_status[rhport] & USB_PORT_STAT_CONNECTION) connected += 1; if (vhci->vhci_hcd_ss->port_status[rhport] & USB_PORT_STAT_CONNECTION) connected += 1; } spin_unlock_irqrestore(&vhci->lock, flags); if (connected > 0) { dev_info(&pdev->dev, "We have %d active connection%s. Do not suspend.\n", connected, (connected == 1 ? "" : "s")); ret = -EBUSY; } else { dev_info(&pdev->dev, "suspend vhci_hcd"); clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); } return ret; } static int vhci_hcd_resume(struct platform_device *pdev) { struct usb_hcd *hcd; dev_dbg(&pdev->dev, "%s\n", __func__); hcd = platform_get_drvdata(pdev); if (!hcd) return 0; set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); usb_hcd_poll_rh_status(hcd); return 0; } #else #define vhci_hcd_suspend NULL #define vhci_hcd_resume NULL #endif static struct platform_driver vhci_driver = { .probe = vhci_hcd_probe, .remove = vhci_hcd_remove, .suspend = vhci_hcd_suspend, .resume = vhci_hcd_resume, .driver = { .name = driver_name, }, }; static void del_platform_devices(void) { struct platform_device *pdev; int i; for (i = 0; i < vhci_num_controllers; i++) { pdev = vhcis[i].pdev; if (pdev != NULL) platform_device_unregister(pdev); vhcis[i].pdev = NULL; } sysfs_remove_link(&platform_bus.kobj, driver_name); } static int __init vhci_hcd_init(void) { int i, ret; if (usb_disabled()) return -ENODEV; if (vhci_num_controllers < 1) vhci_num_controllers = 1; vhcis = kcalloc(vhci_num_controllers, sizeof(struct vhci), GFP_KERNEL); if (vhcis == NULL) return -ENOMEM; for (i = 0; i < vhci_num_controllers; i++) { vhcis[i].pdev = platform_device_alloc(driver_name, i); if (!vhcis[i].pdev) { i--; while (i >= 0) platform_device_put(vhcis[i--].pdev); ret = -ENOMEM; goto err_device_alloc; } } for (i = 0; i < vhci_num_controllers; i++) { void *vhci = &vhcis[i]; ret = platform_device_add_data(vhcis[i].pdev, &vhci, sizeof(void *)); if (ret) goto err_driver_register; } ret = platform_driver_register(&vhci_driver); if (ret) goto err_driver_register; for (i = 0; i < vhci_num_controllers; i++) { ret = platform_device_add(vhcis[i].pdev); if (ret < 0) { i--; while (i >= 0) platform_device_del(vhcis[i--].pdev); goto err_add_hcd; } } return ret; err_add_hcd: platform_driver_unregister(&vhci_driver); err_driver_register: for (i = 0; i < vhci_num_controllers; i++) platform_device_put(vhcis[i].pdev); err_device_alloc: kfree(vhcis); return ret; } static void __exit vhci_hcd_exit(void) { del_platform_devices(); platform_driver_unregister(&vhci_driver); kfree(vhcis); } module_init(vhci_hcd_init); module_exit(vhci_hcd_exit); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1