Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Enric Balletbò i Serra | 1917 | 59.44% | 2 | 28.57% |
Martyn Welch | 1292 | 40.06% | 2 | 28.57% |
Guenter Roeck | 13 | 0.40% | 1 | 14.29% |
Thomas Gleixner | 2 | 0.06% | 1 | 14.29% |
Arvind Yadav | 1 | 0.03% | 1 | 14.29% |
Total | 3225 | 7 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2015 Zodiac Inflight Innovations * * Author: Martyn Welch <martyn.welch@collabora.co.uk> * * Based on twl4030_wdt.c by Timo Kokkonen <timo.t.kokkonen at nokia.com>: * * Copyright (C) Nokia Corporation */ #include <linux/delay.h> #include <linux/i2c.h> #include <linux/ihex.h> #include <linux/firmware.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/sysfs.h> #include <linux/types.h> #include <linux/version.h> #include <linux/watchdog.h> #define ZIIRAVE_TIMEOUT_MIN 3 #define ZIIRAVE_TIMEOUT_MAX 255 #define ZIIRAVE_PING_VALUE 0x0 #define ZIIRAVE_STATE_INITIAL 0x0 #define ZIIRAVE_STATE_OFF 0x1 #define ZIIRAVE_STATE_ON 0x2 #define ZIIRAVE_FW_NAME "ziirave_wdt.fw" static char *ziirave_reasons[] = {"power cycle", "hw watchdog", NULL, NULL, "host request", NULL, "illegal configuration", "illegal instruction", "illegal trap", "unknown"}; #define ZIIRAVE_WDT_FIRM_VER_MAJOR 0x1 #define ZIIRAVE_WDT_BOOT_VER_MAJOR 0x3 #define ZIIRAVE_WDT_RESET_REASON 0x5 #define ZIIRAVE_WDT_STATE 0x6 #define ZIIRAVE_WDT_TIMEOUT 0x7 #define ZIIRAVE_WDT_TIME_LEFT 0x8 #define ZIIRAVE_WDT_PING 0x9 #define ZIIRAVE_WDT_RESET_DURATION 0xa #define ZIIRAVE_FIRM_PKT_TOTAL_SIZE 20 #define ZIIRAVE_FIRM_PKT_DATA_SIZE 16 #define ZIIRAVE_FIRM_FLASH_MEMORY_START 0x1600 #define ZIIRAVE_FIRM_FLASH_MEMORY_END 0x2bbf /* Received and ready for next Download packet. */ #define ZIIRAVE_FIRM_DOWNLOAD_ACK 1 /* Currently writing to flash. Retry Download status in a moment! */ #define ZIIRAVE_FIRM_DOWNLOAD_BUSY 2 /* Wait for ACK timeout in ms */ #define ZIIRAVE_FIRM_WAIT_FOR_ACK_TIMEOUT 50 /* Firmware commands */ #define ZIIRAVE_CMD_DOWNLOAD_START 0x10 #define ZIIRAVE_CMD_DOWNLOAD_END 0x11 #define ZIIRAVE_CMD_DOWNLOAD_SET_READ_ADDR 0x12 #define ZIIRAVE_CMD_DOWNLOAD_READ_BYTE 0x13 #define ZIIRAVE_CMD_RESET_PROCESSOR 0x0b #define ZIIRAVE_CMD_JUMP_TO_BOOTLOADER 0x0c #define ZIIRAVE_CMD_DOWNLOAD_PACKET 0x0e struct ziirave_wdt_rev { unsigned char major; unsigned char minor; }; struct ziirave_wdt_data { struct mutex sysfs_mutex; struct watchdog_device wdd; struct ziirave_wdt_rev bootloader_rev; struct ziirave_wdt_rev firmware_rev; int reset_reason; }; static int wdt_timeout; module_param(wdt_timeout, int, 0); MODULE_PARM_DESC(wdt_timeout, "Watchdog timeout in seconds"); static int reset_duration; module_param(reset_duration, int, 0); MODULE_PARM_DESC(reset_duration, "Watchdog reset pulse duration in milliseconds"); static bool nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); static int ziirave_wdt_revision(struct i2c_client *client, struct ziirave_wdt_rev *rev, u8 command) { int ret; ret = i2c_smbus_read_byte_data(client, command); if (ret < 0) return ret; rev->major = ret; ret = i2c_smbus_read_byte_data(client, command + 1); if (ret < 0) return ret; rev->minor = ret; return 0; } static int ziirave_wdt_set_state(struct watchdog_device *wdd, int state) { struct i2c_client *client = to_i2c_client(wdd->parent); return i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_STATE, state); } static int ziirave_wdt_start(struct watchdog_device *wdd) { return ziirave_wdt_set_state(wdd, ZIIRAVE_STATE_ON); } static int ziirave_wdt_stop(struct watchdog_device *wdd) { return ziirave_wdt_set_state(wdd, ZIIRAVE_STATE_OFF); } static int ziirave_wdt_ping(struct watchdog_device *wdd) { struct i2c_client *client = to_i2c_client(wdd->parent); return i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_PING, ZIIRAVE_PING_VALUE); } static int ziirave_wdt_set_timeout(struct watchdog_device *wdd, unsigned int timeout) { struct i2c_client *client = to_i2c_client(wdd->parent); int ret; ret = i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_TIMEOUT, timeout); if (!ret) wdd->timeout = timeout; return ret; } static unsigned int ziirave_wdt_get_timeleft(struct watchdog_device *wdd) { struct i2c_client *client = to_i2c_client(wdd->parent); int ret; ret = i2c_smbus_read_byte_data(client, ZIIRAVE_WDT_TIME_LEFT); if (ret < 0) ret = 0; return ret; } static int ziirave_firm_wait_for_ack(struct watchdog_device *wdd) { struct i2c_client *client = to_i2c_client(wdd->parent); int ret; unsigned long timeout; timeout = jiffies + msecs_to_jiffies(ZIIRAVE_FIRM_WAIT_FOR_ACK_TIMEOUT); do { if (time_after(jiffies, timeout)) return -ETIMEDOUT; usleep_range(5000, 10000); ret = i2c_smbus_read_byte(client); if (ret < 0) { dev_err(&client->dev, "Failed to read byte\n"); return ret; } } while (ret == ZIIRAVE_FIRM_DOWNLOAD_BUSY); return ret == ZIIRAVE_FIRM_DOWNLOAD_ACK ? 0 : -EIO; } static int ziirave_firm_set_read_addr(struct watchdog_device *wdd, u16 addr) { struct i2c_client *client = to_i2c_client(wdd->parent); u8 address[2]; address[0] = addr & 0xff; address[1] = (addr >> 8) & 0xff; return i2c_smbus_write_block_data(client, ZIIRAVE_CMD_DOWNLOAD_SET_READ_ADDR, ARRAY_SIZE(address), address); } static int ziirave_firm_write_block_data(struct watchdog_device *wdd, u8 command, u8 length, const u8 *data, bool wait_for_ack) { struct i2c_client *client = to_i2c_client(wdd->parent); int ret; ret = i2c_smbus_write_block_data(client, command, length, data); if (ret) { dev_err(&client->dev, "Failed to send command 0x%02x: %d\n", command, ret); return ret; } if (wait_for_ack) ret = ziirave_firm_wait_for_ack(wdd); return ret; } static int ziirave_firm_write_byte(struct watchdog_device *wdd, u8 command, u8 byte, bool wait_for_ack) { return ziirave_firm_write_block_data(wdd, command, 1, &byte, wait_for_ack); } /* * ziirave_firm_write_pkt() - Build and write a firmware packet * * A packet to send to the firmware is composed by following bytes: * Length | Addr0 | Addr1 | Data0 .. Data15 | Checksum | * Where, * Length: A data byte containing the length of the data. * Addr0: Low byte of the address. * Addr1: High byte of the address. * Data0 .. Data15: Array of 16 bytes of data. * Checksum: Checksum byte to verify data integrity. */ static int ziirave_firm_write_pkt(struct watchdog_device *wdd, const struct ihex_binrec *rec) { struct i2c_client *client = to_i2c_client(wdd->parent); u8 i, checksum = 0, packet[ZIIRAVE_FIRM_PKT_TOTAL_SIZE]; int ret; u16 addr; memset(packet, 0, ARRAY_SIZE(packet)); /* Packet length */ packet[0] = (u8)be16_to_cpu(rec->len); /* Packet address */ addr = (be32_to_cpu(rec->addr) & 0xffff) >> 1; packet[1] = addr & 0xff; packet[2] = (addr & 0xff00) >> 8; /* Packet data */ if (be16_to_cpu(rec->len) > ZIIRAVE_FIRM_PKT_DATA_SIZE) return -EMSGSIZE; memcpy(packet + 3, rec->data, be16_to_cpu(rec->len)); /* Packet checksum */ for (i = 0; i < ZIIRAVE_FIRM_PKT_TOTAL_SIZE - 1; i++) checksum += packet[i]; packet[ZIIRAVE_FIRM_PKT_TOTAL_SIZE - 1] = checksum; ret = ziirave_firm_write_block_data(wdd, ZIIRAVE_CMD_DOWNLOAD_PACKET, ARRAY_SIZE(packet), packet, true); if (ret) dev_err(&client->dev, "Failed to write firmware packet at address 0x%04x: %d\n", addr, ret); return ret; } static int ziirave_firm_verify(struct watchdog_device *wdd, const struct firmware *fw) { struct i2c_client *client = to_i2c_client(wdd->parent); const struct ihex_binrec *rec; int i, ret; u8 data[ZIIRAVE_FIRM_PKT_DATA_SIZE]; u16 addr; for (rec = (void *)fw->data; rec; rec = ihex_next_binrec(rec)) { /* Zero length marks end of records */ if (!be16_to_cpu(rec->len)) break; addr = (be32_to_cpu(rec->addr) & 0xffff) >> 1; if (addr < ZIIRAVE_FIRM_FLASH_MEMORY_START || addr > ZIIRAVE_FIRM_FLASH_MEMORY_END) continue; ret = ziirave_firm_set_read_addr(wdd, addr); if (ret) { dev_err(&client->dev, "Failed to send SET_READ_ADDR command: %d\n", ret); return ret; } for (i = 0; i < ARRAY_SIZE(data); i++) { ret = i2c_smbus_read_byte_data(client, ZIIRAVE_CMD_DOWNLOAD_READ_BYTE); if (ret < 0) { dev_err(&client->dev, "Failed to READ DATA: %d\n", ret); return ret; } data[i] = ret; } if (memcmp(data, rec->data, be16_to_cpu(rec->len))) { dev_err(&client->dev, "Firmware mismatch at address 0x%04x\n", addr); return -EINVAL; } } return 0; } static int ziirave_firm_upload(struct watchdog_device *wdd, const struct firmware *fw) { struct i2c_client *client = to_i2c_client(wdd->parent); int ret, words_till_page_break; const struct ihex_binrec *rec; struct ihex_binrec *rec_new; ret = ziirave_firm_write_byte(wdd, ZIIRAVE_CMD_JUMP_TO_BOOTLOADER, 1, false); if (ret) return ret; msleep(500); ret = ziirave_firm_write_byte(wdd, ZIIRAVE_CMD_DOWNLOAD_START, 1, true); if (ret) return ret; msleep(500); for (rec = (void *)fw->data; rec; rec = ihex_next_binrec(rec)) { /* Zero length marks end of records */ if (!be16_to_cpu(rec->len)) break; /* Check max data size */ if (be16_to_cpu(rec->len) > ZIIRAVE_FIRM_PKT_DATA_SIZE) { dev_err(&client->dev, "Firmware packet too long (%d)\n", be16_to_cpu(rec->len)); return -EMSGSIZE; } /* Calculate words till page break */ words_till_page_break = (64 - ((be32_to_cpu(rec->addr) >> 1) & 0x3f)); if ((be16_to_cpu(rec->len) >> 1) > words_till_page_break) { /* * Data in passes page boundary, so we need to split in * two blocks of data. Create a packet with the first * block of data. */ rec_new = kzalloc(sizeof(struct ihex_binrec) + (words_till_page_break << 1), GFP_KERNEL); if (!rec_new) return -ENOMEM; rec_new->len = cpu_to_be16(words_till_page_break << 1); rec_new->addr = rec->addr; memcpy(rec_new->data, rec->data, be16_to_cpu(rec_new->len)); ret = ziirave_firm_write_pkt(wdd, rec_new); kfree(rec_new); if (ret) return ret; /* Create a packet with the second block of data */ rec_new = kzalloc(sizeof(struct ihex_binrec) + be16_to_cpu(rec->len) - (words_till_page_break << 1), GFP_KERNEL); if (!rec_new) return -ENOMEM; /* Remaining bytes */ rec_new->len = rec->len - cpu_to_be16(words_till_page_break << 1); rec_new->addr = cpu_to_be32(be32_to_cpu(rec->addr) + (words_till_page_break << 1)); memcpy(rec_new->data, rec->data + (words_till_page_break << 1), be16_to_cpu(rec_new->len)); ret = ziirave_firm_write_pkt(wdd, rec_new); kfree(rec_new); if (ret) return ret; } else { ret = ziirave_firm_write_pkt(wdd, rec); if (ret) return ret; } } /* For end of download, the length field will be set to 0 */ rec_new = kzalloc(sizeof(struct ihex_binrec) + 1, GFP_KERNEL); if (!rec_new) return -ENOMEM; ret = ziirave_firm_write_pkt(wdd, rec_new); kfree(rec_new); if (ret) { dev_err(&client->dev, "Failed to send EMPTY packet: %d\n", ret); return ret; } /* This sleep seems to be required */ msleep(20); /* Start firmware verification */ ret = ziirave_firm_verify(wdd, fw); if (ret) { dev_err(&client->dev, "Failed to verify firmware: %d\n", ret); return ret; } /* End download operation */ ret = ziirave_firm_write_byte(wdd, ZIIRAVE_CMD_DOWNLOAD_END, 1, false); if (ret) return ret; /* Reset the processor */ ret = ziirave_firm_write_byte(wdd, ZIIRAVE_CMD_RESET_PROCESSOR, 1, false); if (ret) return ret; msleep(500); return 0; } static const struct watchdog_info ziirave_wdt_info = { .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, .identity = "Zodiac RAVE Watchdog", }; static const struct watchdog_ops ziirave_wdt_ops = { .owner = THIS_MODULE, .start = ziirave_wdt_start, .stop = ziirave_wdt_stop, .ping = ziirave_wdt_ping, .set_timeout = ziirave_wdt_set_timeout, .get_timeleft = ziirave_wdt_get_timeleft, }; static ssize_t ziirave_wdt_sysfs_show_firm(struct device *dev, struct device_attribute *attr, char *buf) { struct i2c_client *client = to_i2c_client(dev->parent); struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client); int ret; ret = mutex_lock_interruptible(&w_priv->sysfs_mutex); if (ret) return ret; ret = sprintf(buf, "02.%02u.%02u", w_priv->firmware_rev.major, w_priv->firmware_rev.minor); mutex_unlock(&w_priv->sysfs_mutex); return ret; } static DEVICE_ATTR(firmware_version, S_IRUGO, ziirave_wdt_sysfs_show_firm, NULL); static ssize_t ziirave_wdt_sysfs_show_boot(struct device *dev, struct device_attribute *attr, char *buf) { struct i2c_client *client = to_i2c_client(dev->parent); struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client); int ret; ret = mutex_lock_interruptible(&w_priv->sysfs_mutex); if (ret) return ret; ret = sprintf(buf, "01.%02u.%02u", w_priv->bootloader_rev.major, w_priv->bootloader_rev.minor); mutex_unlock(&w_priv->sysfs_mutex); return ret; } static DEVICE_ATTR(bootloader_version, S_IRUGO, ziirave_wdt_sysfs_show_boot, NULL); static ssize_t ziirave_wdt_sysfs_show_reason(struct device *dev, struct device_attribute *attr, char *buf) { struct i2c_client *client = to_i2c_client(dev->parent); struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client); int ret; ret = mutex_lock_interruptible(&w_priv->sysfs_mutex); if (ret) return ret; ret = sprintf(buf, "%s", ziirave_reasons[w_priv->reset_reason]); mutex_unlock(&w_priv->sysfs_mutex); return ret; } static DEVICE_ATTR(reset_reason, S_IRUGO, ziirave_wdt_sysfs_show_reason, NULL); static ssize_t ziirave_wdt_sysfs_store_firm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev->parent); struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client); const struct firmware *fw; int err; err = request_ihex_firmware(&fw, ZIIRAVE_FW_NAME, dev); if (err) { dev_err(&client->dev, "Failed to request ihex firmware\n"); return err; } err = mutex_lock_interruptible(&w_priv->sysfs_mutex); if (err) goto release_firmware; err = ziirave_firm_upload(&w_priv->wdd, fw); if (err) { dev_err(&client->dev, "The firmware update failed: %d\n", err); goto unlock_mutex; } /* Update firmware version */ err = ziirave_wdt_revision(client, &w_priv->firmware_rev, ZIIRAVE_WDT_FIRM_VER_MAJOR); if (err) { dev_err(&client->dev, "Failed to read firmware version: %d\n", err); goto unlock_mutex; } dev_info(&client->dev, "Firmware updated to version 02.%02u.%02u\n", w_priv->firmware_rev.major, w_priv->firmware_rev.minor); /* Restore the watchdog timeout */ err = ziirave_wdt_set_timeout(&w_priv->wdd, w_priv->wdd.timeout); if (err) dev_err(&client->dev, "Failed to set timeout: %d\n", err); unlock_mutex: mutex_unlock(&w_priv->sysfs_mutex); release_firmware: release_firmware(fw); return err ? err : count; } static DEVICE_ATTR(update_firmware, S_IWUSR, NULL, ziirave_wdt_sysfs_store_firm); static struct attribute *ziirave_wdt_attrs[] = { &dev_attr_firmware_version.attr, &dev_attr_bootloader_version.attr, &dev_attr_reset_reason.attr, &dev_attr_update_firmware.attr, NULL }; ATTRIBUTE_GROUPS(ziirave_wdt); static int ziirave_wdt_init_duration(struct i2c_client *client) { int ret; if (!reset_duration) { /* See if the reset pulse duration is provided in an of_node */ if (!client->dev.of_node) ret = -ENODEV; else ret = of_property_read_u32(client->dev.of_node, "reset-duration-ms", &reset_duration); if (ret) { dev_info(&client->dev, "Unable to set reset pulse duration, using default\n"); return 0; } } if (reset_duration < 1 || reset_duration > 255) return -EINVAL; dev_info(&client->dev, "Setting reset duration to %dms", reset_duration); return i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_RESET_DURATION, reset_duration); } static int ziirave_wdt_probe(struct i2c_client *client, const struct i2c_device_id *id) { int ret; struct ziirave_wdt_data *w_priv; int val; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; w_priv = devm_kzalloc(&client->dev, sizeof(*w_priv), GFP_KERNEL); if (!w_priv) return -ENOMEM; mutex_init(&w_priv->sysfs_mutex); w_priv->wdd.info = &ziirave_wdt_info; w_priv->wdd.ops = &ziirave_wdt_ops; w_priv->wdd.min_timeout = ZIIRAVE_TIMEOUT_MIN; w_priv->wdd.max_timeout = ZIIRAVE_TIMEOUT_MAX; w_priv->wdd.parent = &client->dev; w_priv->wdd.groups = ziirave_wdt_groups; watchdog_init_timeout(&w_priv->wdd, wdt_timeout, &client->dev); /* * The default value set in the watchdog should be perfectly valid, so * pass that in if we haven't provided one via the module parameter or * of property. */ if (w_priv->wdd.timeout == 0) { val = i2c_smbus_read_byte_data(client, ZIIRAVE_WDT_TIMEOUT); if (val < 0) return val; if (val < ZIIRAVE_TIMEOUT_MIN) return -ENODEV; w_priv->wdd.timeout = val; } else { ret = ziirave_wdt_set_timeout(&w_priv->wdd, w_priv->wdd.timeout); if (ret) return ret; dev_info(&client->dev, "Timeout set to %ds.", w_priv->wdd.timeout); } watchdog_set_nowayout(&w_priv->wdd, nowayout); i2c_set_clientdata(client, w_priv); /* If in unconfigured state, set to stopped */ val = i2c_smbus_read_byte_data(client, ZIIRAVE_WDT_STATE); if (val < 0) return val; if (val == ZIIRAVE_STATE_INITIAL) ziirave_wdt_stop(&w_priv->wdd); ret = ziirave_wdt_init_duration(client); if (ret) return ret; ret = ziirave_wdt_revision(client, &w_priv->firmware_rev, ZIIRAVE_WDT_FIRM_VER_MAJOR); if (ret) return ret; ret = ziirave_wdt_revision(client, &w_priv->bootloader_rev, ZIIRAVE_WDT_BOOT_VER_MAJOR); if (ret) return ret; w_priv->reset_reason = i2c_smbus_read_byte_data(client, ZIIRAVE_WDT_RESET_REASON); if (w_priv->reset_reason < 0) return w_priv->reset_reason; if (w_priv->reset_reason >= ARRAY_SIZE(ziirave_reasons) || !ziirave_reasons[w_priv->reset_reason]) return -ENODEV; ret = watchdog_register_device(&w_priv->wdd); return ret; } static int ziirave_wdt_remove(struct i2c_client *client) { struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client); watchdog_unregister_device(&w_priv->wdd); return 0; } static const struct i2c_device_id ziirave_wdt_id[] = { { "rave-wdt", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, ziirave_wdt_id); static const struct of_device_id zrv_wdt_of_match[] = { { .compatible = "zii,rave-wdt", }, { }, }; MODULE_DEVICE_TABLE(of, zrv_wdt_of_match); static struct i2c_driver ziirave_wdt_driver = { .driver = { .name = "ziirave_wdt", .of_match_table = zrv_wdt_of_match, }, .probe = ziirave_wdt_probe, .remove = ziirave_wdt_remove, .id_table = ziirave_wdt_id, }; module_i2c_driver(ziirave_wdt_driver); MODULE_AUTHOR("Martyn Welch <martyn.welch@collabora.co.uk"); MODULE_DESCRIPTION("Zodiac Aerospace RAVE Switch Watchdog Processor Driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1